Merge branch 'sctp-fix-gap-ack-blocks'

Marcelo Ricardo Leitner says:

====================
sctp: fix the handling of SACK Gap Ack blocks

sctp_acked() is using 32bit arithmetics on 16bits vars, via TSN_lte()
macros, which is weird and confusing.

Once the offset to ctsn is calculated, all wrapping is already handled
and thus to verify the Gap Ack blocks we can just use pure
less/big-or-equal than checks.

Also, rename gap variable to tsn_offset, so it's more meaningful, as
it doesn't point to any gap at all.

Even so, I don't think this discrepancy resulted in any practical bug.

This patch is a preparation for the next one, which will introduce
typecheck() for TSN_lte() macros and would cause a compile error here.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

include/net/sctp/sm.h

@@ -307,85 +307,27 @@ static inline __u16 sctp_data_size(struct sctp_chunk *chunk)
 }
 
 /* Compare two TSNs */
+#define TSN_lt(a,b)	\
+	(typecheck(__u32, a) && \
+	 typecheck(__u32, b) && \
+	 ((__s32)((a) - (b)) < 0))
 
-/* RFC 1982 - Serial Number Arithmetic
- *
- * 2. Comparison
- *  Then, s1 is said to be equal to s2 if and only if i1 is equal to i2,
- *  in all other cases, s1 is not equal to s2.
- *
- * s1 is said to be less than s2 if, and only if, s1 is not equal to s2,
- * and
- *
- *      (i1 < i2 and i2 - i1 < 2^(SERIAL_BITS - 1)) or
- *      (i1 > i2 and i1 - i2 > 2^(SERIAL_BITS - 1))
- *
- * s1 is said to be greater than s2 if, and only if, s1 is not equal to
- * s2, and
- *
- *      (i1 < i2 and i2 - i1 > 2^(SERIAL_BITS - 1)) or
- *      (i1 > i2 and i1 - i2 < 2^(SERIAL_BITS - 1))
- */
-
-/*
- * RFC 2960
- *  1.6 Serial Number Arithmetic
- *
- * Comparisons and arithmetic on TSNs in this document SHOULD use Serial
- * Number Arithmetic as defined in [RFC1982] where SERIAL_BITS = 32.
- */
-
-enum {
-	TSN_SIGN_BIT = (1<<31)
-};
-
-static inline int TSN_lt(__u32 s, __u32 t)
-{
-	return ((s) - (t)) & TSN_SIGN_BIT;
-}
-
-static inline int TSN_lte(__u32 s, __u32 t)
-{
-	return ((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT);
-}
+#define TSN_lte(a,b)	\
+	(typecheck(__u32, a) && \
+	 typecheck(__u32, b) && \
+	 ((__s32)((a) - (b)) <= 0))
 
 /* Compare two SSNs */
-
-/*
- * RFC 2960
- *  1.6 Serial Number Arithmetic
- *
- * Comparisons and arithmetic on Stream Sequence Numbers in this document
- * SHOULD use Serial Number Arithmetic as defined in [RFC1982] where
- * SERIAL_BITS = 16.
- */
-enum {
-	SSN_SIGN_BIT = (1<<15)
-};
-
-static inline int SSN_lt(__u16 s, __u16 t)
-{
-	return ((s) - (t)) & SSN_SIGN_BIT;
-}
-
-static inline int SSN_lte(__u16 s, __u16 t)
-{
-	return ((s) == (t)) || (((s) - (t)) & SSN_SIGN_BIT);
-}
-
-/*
- * ADDIP 3.1.1
- * The valid range of Serial Number is from 0 to 4294967295 (2**32 - 1). Serial
- * Numbers wrap back to 0 after reaching 4294967295.
- */
-enum {
-	ADDIP_SERIAL_SIGN_BIT = (1<<31)
-};
-
-static inline int ADDIP_SERIAL_gte(__u32 s, __u32 t)
-{
-	return ((s) == (t)) || (((t) - (s)) & ADDIP_SERIAL_SIGN_BIT);
-}
+#define SSN_lt(a,b)		\
+	(typecheck(__u16, a) && \
+	 typecheck(__u16, b) && \
+	 ((__s16)((a) - (b)) < 0))
+
+/* ADDIP 3.1.1 */
+#define ADDIP_SERIAL_gte(a,b)	\
+	(typecheck(__u32, a) && \
+	 typecheck(__u32, b) && \
+	 ((__s32)((b) - (a)) <= 0))
 
 /* Check VTAG of the packet matches the sender's own tag. */
 static inline int

net/sctp/outqueue.c

@@ -1719,7 +1719,7 @@ static int sctp_acked(struct sctp_sackhdr *sack, __u32 tsn)
 {
 	int i;
 	sctp_sack_variable_t *frags;
-	__u16 gap;
+	__u16 tsn_offset, blocks;
 	__u32 ctsn = ntohl(sack->cum_tsn_ack);
 
 	if (TSN_lte(tsn, ctsn))
@@ -1738,10 +1738,11 @@ static int sctp_acked(struct sctp_sackhdr *sack, __u32 tsn)
 	 */
 
 	frags = sack->variable;
-	gap = tsn - ctsn;
-	for (i = 0; i < ntohs(sack->num_gap_ack_blocks); ++i) {
-		if (TSN_lte(ntohs(frags[i].gab.start), gap) &&
-		    TSN_lte(gap, ntohs(frags[i].gab.end)))
+	blocks = ntohs(sack->num_gap_ack_blocks);
+	tsn_offset = tsn - ctsn;
+	for (i = 0; i < blocks; ++i) {
+		if (tsn_offset >= ntohs(frags[i].gab.start) &&
+		    tsn_offset <= ntohs(frags[i].gab.end))
 			goto pass;
 	}