Commit 8907bfd2 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for Axxia when it is a target and for PEC handling of
  stm32f7.

  Plus, fix an OF node leak pattern in the mux subsystem"

* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
  i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: aspeed: Fix i2c bus hang in slave read
parents 67d4c879 c896ff2d
......@@ -749,6 +749,8 @@ static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
}
static int aspeed_i2c_reg_slave(struct i2c_client *client)
......@@ -765,7 +767,6 @@ static int aspeed_i2c_reg_slave(struct i2c_client *client)
__aspeed_i2c_reg_slave(bus, client->addr);
bus->slave = client;
bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
spin_unlock_irqrestore(&bus->lock, flags);
return 0;
......
......@@ -1059,9 +1059,10 @@ static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
/* Configure PEC */
if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
cr1 |= STM32F7_I2C_CR1_PECEN;
if (!f7_msg->read_write) {
cr2 |= STM32F7_I2C_CR2_PECBYTE;
if (!f7_msg->read_write)
f7_msg->count++;
}
} else {
cr1 &= ~STM32F7_I2C_CR1_PECEN;
cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
......@@ -1149,8 +1150,10 @@ static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev)
f7_msg->stop = true;
/* Add one byte for PEC if needed */
if (cr1 & STM32F7_I2C_CR1_PECEN)
if (cr1 & STM32F7_I2C_CR1_PECEN) {
cr2 |= STM32F7_I2C_CR2_PECBYTE;
f7_msg->count++;
}
/* Set number of bytes to be transferred */
cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
......
......@@ -61,7 +61,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
if (ret)
goto err;
adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
adap = of_get_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
if (!adap) {
ret = -ENODEV;
goto err_with_revert;
......
......@@ -52,7 +52,7 @@ static struct i2c_adapter *mux_parent_adapter(struct device *dev)
dev_err(dev, "Cannot parse i2c-parent\n");
return ERR_PTR(-ENODEV);
}
parent = of_find_i2c_adapter_by_node(parent_np);
parent = of_get_i2c_adapter_by_node(parent_np);
of_node_put(parent_np);
if (!parent)
return ERR_PTR(-EPROBE_DEFER);
......
......@@ -62,7 +62,7 @@ static struct i2c_adapter *i2c_mux_pinctrl_parent_adapter(struct device *dev)
dev_err(dev, "Cannot parse i2c-parent\n");
return ERR_PTR(-ENODEV);
}
parent = of_find_i2c_adapter_by_node(parent_np);
parent = of_get_i2c_adapter_by_node(parent_np);
of_node_put(parent_np);
if (!parent)
return ERR_PTR(-EPROBE_DEFER);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment