ARM: kirkwood: Move to ID based MBus window creation

With the introduction of the ID based MBus API, it's better
to switch to use it instead of the current name based scheme.

This will allow to deprecate the name based API, once every
user is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/mach-kirkwood/common.c

@@ -37,6 +37,12 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR   0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR   0x01
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -672,9 +678,13 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_setup_wins(void)
 {
-	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+				    KIRKWOOD_MBUS_NAND_ATTR,
+				    KIRKWOOD_NAND_MEM_PHYS_BASE,
 				    KIRKWOOD_NAND_MEM_SIZE);
-	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+				    KIRKWOOD_MBUS_SRAM_ATTR,
+				    KIRKWOOD_SRAM_PHYS_BASE,
 				    KIRKWOOD_SRAM_SIZE);
 }
 

arch/arm/mach-kirkwood/pcie.c

@@ -20,6 +20,16 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR      0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR       0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR      0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR       0xd0
+
 static void kirkwood_enable_pcie_clk(const char *port)
 {
 	struct clk *clk;
@@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 void __init kirkwood_pcie_init(unsigned int portmask)
 {
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE0_IO_ATTR,
 					  KIRKWOOD_PCIE_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE_IO_SIZE,
-					  KIRKWOOD_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+					  KIRKWOOD_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
 				    KIRKWOOD_PCIE_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+				    KIRKWOOD_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE1_IO_ATTR,
 					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE1_IO_SIZE,
-					  KIRKWOOD_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
 				    KIRKWOOD_PCIE1_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+				    KIRKWOOD_PCIE1_MEM_SIZE);
 
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;