Merge branches 'for-4.3/chicony', 'for-4.3/cp2112', 'for-4.3/i2c-hid',...

Merge branches 'for-4.3/chicony', 'for-4.3/cp2112', 'for-4.3/i2c-hid', 'for-4.3/lenovo', 'for-4.3/logitech', 'for-4.3/multitouch', 'for-4.3/picolcd', 'for-4.3/rmi', 'for-4.3/sensor-hub', 'for-4.3/sony' and 'for-4.3/wacom' into for-linus

Documentation/ABI/testing/sysfs-driver-wacom

@@ -77,3 +77,22 @@ Description:
 		The format is also scrambled, like in the USB mode, and it can
 		be summarized by converting 76543210 into GECA6420.
 					    HGFEDCBA      HFDB7531
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing the character sequence '*' followed by a newline to
+		this file will delete all of the current pairings on the
+		device. Other character sequences are reserved. This file is
+		write only.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		Reading from this file reports the mode status of the
+		remote as indicated by the LED lights on the device. If no
+		reports have been received from the paired device, reading
+		from this file will report '-1'. The mode is read-only
+		and cannot be set through the driver.

drivers/hid/Kconfig

@@ -486,6 +486,7 @@ config HID_MULTITOUCH
 	  - Atmel panels
 	  - Cando dual touch panels
 	  - Chunghwa panels
+	  - CJTouch panels
 	  - CVTouch panels
 	  - Cypress TrueTouch panels
 	  - Elan Microelectronics touch panels

drivers/hid/hid-chicony.c

@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/hid.h>
 #include <linux/module.h>
+#include <linux/usb.h>
 
 #include "hid-ids.h"
 
@@ -57,10 +58,34 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	return 1;
 }
 
+static __u8 *ch_switch12_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	
+	if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
+		/* Change usage maximum and logical maximum from 0x7fff to
+		 * 0x2fff, so they don't exceed HID_MAX_USAGES */
+		switch (hdev->product) {
+		case USB_DEVICE_ID_CHICONY_ACER_SWITCH12:
+			if (*rsize >= 128 && rdesc[64] == 0xff && rdesc[65] == 0x7f
+					&& rdesc[69] == 0xff && rdesc[70] == 0x7f) {
+				hid_info(hdev, "Fixing up report descriptor\n");
+				rdesc[65] = rdesc[70] = 0x2f;
+			}
+			break;
+		}
+
+	}
+	return rdesc;
+}
+
+
 static const struct hid_device_id ch_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ch_devices);
@@ -68,6 +93,7 @@ MODULE_DEVICE_TABLE(hid, ch_devices);
 static struct hid_driver ch_driver = {
 	.name = "chicony",
 	.id_table = ch_devices,
+	.report_fixup = ch_switch12_report_fixup,
 	.input_mapping = ch_input_mapping,
 };
 module_hid_driver(ch_driver);

drivers/hid/hid-core.c

@@ -1826,6 +1826,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },

drivers/hid/hid-cp2112.c

@@ -156,6 +156,7 @@ struct cp2112_device {
 	wait_queue_head_t wait;
 	u8 read_data[61];
 	u8 read_length;
+	u8 hwversion;
 	int xfer_status;
 	atomic_t read_avail;
 	atomic_t xfer_avail;
@@ -446,6 +447,24 @@ static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data,
 	return data_length + 3;
 }
 
+static int cp2112_i2c_write_read_req(void *buf, u8 slave_address,
+				     u8 *addr, int addr_length,
+				     int read_length)
+{
+	struct cp2112_write_read_req_report *report = buf;
+
+	if (read_length < 1 || read_length > 512 ||
+	    addr_length > sizeof(report->target_address))
+		return -EINVAL;
+
+	report->report = CP2112_DATA_WRITE_READ_REQUEST;
+	report->slave_address = slave_address << 1;
+	report->length = cpu_to_be16(read_length);
+	report->target_address_length = addr_length;
+	memcpy(report->target_address, addr, addr_length);
+	return addr_length + 5;
+}
+
 static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			   int num)
 {
@@ -453,26 +472,46 @@ static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	struct hid_device *hdev = dev->hdev;
 	u8 buf[64];
 	ssize_t count;
+	ssize_t read_length = 0;
+	u8 *read_buf = NULL;
 	unsigned int retries;
 	int ret;
 
 	hid_dbg(hdev, "I2C %d messages\n", num);
 
-	if (num != 1) {
+	if (num == 1) {
+		if (msgs->flags & I2C_M_RD) {
+			hid_dbg(hdev, "I2C read %#04x len %d\n",
+				msgs->addr, msgs->len);
+			read_length = msgs->len;
+			read_buf = msgs->buf;
+			count = cp2112_read_req(buf, msgs->addr, msgs->len);
+		} else {
+			hid_dbg(hdev, "I2C write %#04x len %d\n",
+				msgs->addr, msgs->len);
+			count = cp2112_i2c_write_req(buf, msgs->addr,
+						     msgs->buf, msgs->len);
+		}
+		if (count < 0)
+			return count;
+	} else if (dev->hwversion > 1 &&  /* no repeated start in rev 1 */
+		   num == 2 &&
+		   msgs[0].addr == msgs[1].addr &&
+		   !(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD)) {
+		hid_dbg(hdev, "I2C write-read %#04x wlen %d rlen %d\n",
+			msgs[0].addr, msgs[0].len, msgs[1].len);
+		read_length = msgs[1].len;
+		read_buf = msgs[1].buf;
+		count = cp2112_i2c_write_read_req(buf, msgs[0].addr,
+				msgs[0].buf, msgs[0].len, msgs[1].len);
+		if (count < 0)
+			return count;
+	} else {
 		hid_err(hdev,
 			"Multi-message I2C transactions not supported\n");
 		return -EOPNOTSUPP;
 	}
 
-	if (msgs->flags & I2C_M_RD)
-		count = cp2112_read_req(buf, msgs->addr, msgs->len);
-	else
-		count = cp2112_i2c_write_req(buf, msgs->addr, msgs->buf,
-					     msgs->len);
-
-	if (count < 0)
-		return count;
-
 	ret = hid_hw_power(hdev, PM_HINT_FULLON);
 	if (ret < 0) {
 		hid_err(hdev, "power management error: %d\n", ret);
@@ -508,21 +547,34 @@ static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		goto power_normal;
 	}
 
-	if (!(msgs->flags & I2C_M_RD))
-		goto finish;
-
-	ret = cp2112_read(dev, msgs->buf, msgs->len);
-	if (ret < 0)
-		goto power_normal;
-	if (ret != msgs->len) {
-		hid_warn(hdev, "short read: %d < %d\n", ret, msgs->len);
-		ret = -EIO;
-		goto power_normal;
+	for (count = 0; count < read_length;) {
+		ret = cp2112_read(dev, read_buf + count, read_length - count);
+		if (ret < 0)
+			goto power_normal;
+		if (ret == 0) {
+			hid_err(hdev, "read returned 0\n");
+			ret = -EIO;
+			goto power_normal;
+		}
+		count += ret;
+		if (count > read_length) {
+			/*
+			 * The hardware returned too much data.
+			 * This is mostly harmless because cp2112_read()
+			 * has a limit check so didn't overrun our
+			 * buffer.  Nevertheless, we return an error
+			 * because something is seriously wrong and
+			 * it shouldn't go unnoticed.
+			 */
+			hid_err(hdev, "long read: %d > %zd\n",
+				ret, read_length - count + ret);
+			ret = -EIO;
+			goto power_normal;
+		}
 	}
 
-finish:
 	/* return the number of transferred messages */
-	ret = 1;
+	ret = num;
 
 power_normal:
 	hid_hw_power(hdev, PM_HINT_NORMAL);
@@ -537,7 +589,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 	struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
 	struct hid_device *hdev = dev->hdev;
 	u8 buf[64];
-	__be16 word;
+	__le16 word;
 	ssize_t count;
 	size_t read_length = 0;
 	unsigned int retries;
@@ -554,7 +606,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_read_req(buf, addr, read_length);
 		else
-			count = cp2112_write_req(buf, addr, data->byte, NULL,
+			count = cp2112_write_req(buf, addr, command, NULL,
 						 0);
 		break;
 	case I2C_SMBUS_BYTE_DATA:
@@ -569,7 +621,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		break;
 	case I2C_SMBUS_WORD_DATA:
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_write_read_req(buf, addr, read_length,
@@ -582,7 +634,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		size = I2C_SMBUS_WORD_DATA;
 		read_write = I2C_SMBUS_READ;
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		count = cp2112_write_read_req(buf, addr, read_length, command,
 					      (u8 *)&word, 2);
@@ -675,7 +727,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		data->byte = buf[0];
 		break;
 	case I2C_SMBUS_WORD_DATA:
-		data->word = be16_to_cpup((__be16 *)buf);
+		data->word = le16_to_cpup((__le16 *)buf);
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
 		if (read_length > I2C_SMBUS_BLOCK_MAX) {
@@ -1030,6 +1082,7 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	dev->adap.dev.parent	= &hdev->dev;
 	snprintf(dev->adap.name, sizeof(dev->adap.name),
 		 "CP2112 SMBus Bridge on hiddev%d", hdev->minor);
+	dev->hwversion = buf[2];
 	init_waitqueue_head(&dev->wait);
 
 	hid_device_io_start(hdev);

drivers/hid/hid-ids.h

@@ -233,12 +233,17 @@
 #define USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE	0x1053
 #define USB_DEVICE_ID_CHICONY_WIRELESS2	0x1123
 #define USB_DEVICE_ID_CHICONY_AK1D	0x1125
+#define USB_DEVICE_ID_CHICONY_ACER_SWITCH12	0x1421
 
 #define USB_VENDOR_ID_CHUNGHWAT		0x2247
 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH	0x0001
 
 #define USB_VENDOR_ID_CIDC		0x1677
 
+#define USB_VENDOR_ID_CJTOUCH		0x24b8
+#define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0020	0x0020
+#define USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0040	0x0040
+
 #define USB_VENDOR_ID_CMEDIA		0x0d8c
 #define USB_DEVICE_ID_CM109		0x000e
 
@@ -503,6 +508,9 @@
 #define USB_VENDOR_ID_IRTOUCHSYSTEMS	0x6615
 #define USB_DEVICE_ID_IRTOUCH_INFRARED_USB	0x0070
 
+#define USB_VENDOR_ID_ITE               0x048d
+#define USB_DEVICE_ID_ITE_LENOVO_YOGA   0x8386
+
 #define USB_VENDOR_ID_JABRA		0x0b0e
 #define USB_DEVICE_ID_JABRA_SPEAK_410	0x0412
 #define USB_DEVICE_ID_JABRA_SPEAK_510	0x0420
@@ -605,6 +613,7 @@
 #define USB_DEVICE_ID_LOGITECH_DUAL_ACTION	0xc216
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2	0xc218
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2	0xc219
+#define USB_DEVICE_ID_LOGITECH_G29_WHEEL	0xc24f
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D	0xc283
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO	0xc286
 #define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940	0xc287

drivers/hid/hid-lenovo.c

@@ -37,6 +37,7 @@ struct lenovo_drvdata_tpkbd {
 };
 
 struct lenovo_drvdata_cptkbd {
+	u8 middlebutton_state; /* 0:Up, 1:Down (undecided), 2:Scrolling */
 	bool fn_lock;
 	int sensitivity;
 };
@@ -146,10 +147,10 @@ static int lenovo_input_mapping_cptkbd(struct hid_device *hdev,
 
 		switch (usage->hid & HID_USAGE) {
 		case 0x0000:
-			hid_map_usage(hi, usage, bit, max, EV_REL, 0x06);
+			hid_map_usage(hi, usage, bit, max, EV_REL, REL_HWHEEL);
 			return 1;
 		case 0x0001:
-			hid_map_usage(hi, usage, bit, max, EV_REL, 0x08);
+			hid_map_usage(hi, usage, bit, max, EV_REL, REL_WHEEL);
 			return 1;
 		default:
 			return -1;
@@ -207,9 +208,12 @@ static void lenovo_features_set_cptkbd(struct hid_device *hdev)
 	struct lenovo_drvdata_cptkbd *cptkbd_data = hid_get_drvdata(hdev);
 
 	ret = lenovo_send_cmd_cptkbd(hdev, 0x05, cptkbd_data->fn_lock);
-	ret = lenovo_send_cmd_cptkbd(hdev, 0x02, cptkbd_data->sensitivity);
 	if (ret)
 		hid_err(hdev, "Fn-lock setting failed: %d\n", ret);
+
+	ret = lenovo_send_cmd_cptkbd(hdev, 0x02, cptkbd_data->sensitivity);
+	if (ret)
+		hid_err(hdev, "Sensitivity setting failed: %d\n", ret);
 }
 
 static ssize_t attr_fn_lock_show_cptkbd(struct device *dev,
@@ -313,6 +317,53 @@ static int lenovo_raw_event(struct hid_device *hdev,
 	return 0;
 }
 
+static int lenovo_event_cptkbd(struct hid_device *hdev,
+		struct hid_field *field, struct hid_usage *usage, __s32 value)
+{
+	struct lenovo_drvdata_cptkbd *cptkbd_data = hid_get_drvdata(hdev);
+
+	/* "wheel" scroll events */
+	if (usage->type == EV_REL && (usage->code == REL_WHEEL ||
+			usage->code == REL_HWHEEL)) {
+		/* Scroll events disable middle-click event */
+		cptkbd_data->middlebutton_state = 2;
+		return 0;
+	}
+
+	/* Middle click events */
+	if (usage->type == EV_KEY && usage->code == BTN_MIDDLE) {
+		if (value == 1) {
+			cptkbd_data->middlebutton_state = 1;
+		} else if (value == 0) {
+			if (cptkbd_data->middlebutton_state == 1) {
+				/* No scrolling inbetween, send middle-click */
+				input_event(field->hidinput->input,
+					EV_KEY, BTN_MIDDLE, 1);
+				input_sync(field->hidinput->input);
+				input_event(field->hidinput->input,
+					EV_KEY, BTN_MIDDLE, 0);
+				input_sync(field->hidinput->input);
+			}
+			cptkbd_data->middlebutton_state = 0;
+		}
+		return 1;
+	}
+
+	return 0;
+}
+
+static int lenovo_event(struct hid_device *hdev, struct hid_field *field,
+		struct hid_usage *usage, __s32 value)
+{
+	switch (hdev->product) {
+	case USB_DEVICE_ID_LENOVO_CUSBKBD:
+	case USB_DEVICE_ID_LENOVO_CBTKBD:
+		return lenovo_event_cptkbd(hdev, field, usage, value);
+	default:
+		return 0;
+	}
+}
+
 static int lenovo_features_set_tpkbd(struct hid_device *hdev)
 {
 	struct hid_report *report;
@@ -705,6 +756,7 @@ static int lenovo_probe_cptkbd(struct hid_device *hdev)
 		hid_warn(hdev, "Failed to switch middle button: %d\n", ret);
 
 	/* Set keyboard settings to known state */
+	cptkbd_data->middlebutton_state = 0;
 	cptkbd_data->fn_lock = true;
 	cptkbd_data->sensitivity = 0x05;
 	lenovo_features_set_cptkbd(hdev);
@@ -832,6 +884,7 @@ static struct hid_driver lenovo_driver = {
 	.probe = lenovo_probe,
 	.remove = lenovo_remove,
 	.raw_event = lenovo_raw_event,
+	.event = lenovo_event,
 	.report_fixup = lenovo_report_fixup,
 };
 module_hid_driver(lenovo_driver);

drivers/hid/hid-lg.c

@@ -776,6 +776,8 @@ static const struct hid_device_id lg_devices[] = {
 		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2),
 		.driver_data = LG_FF },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G29_WHEEL),
+		.driver_data = LG_FF4 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D),
 		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO),

drivers/hid/hid-multitouch.c

@@ -1145,6 +1145,14 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT,
 			USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
 
+	/* CJTouch panels */
+	{ .driver_data = MT_CLS_NSMU,
+		MT_USB_DEVICE(USB_VENDOR_ID_CJTOUCH,
+			USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0020) },
+	{ .driver_data = MT_CLS_NSMU,
+		MT_USB_DEVICE(USB_VENDOR_ID_CJTOUCH,
+			USB_DEVICE_ID_CJTOUCH_MULTI_TOUCH_0040) },
+
 	/* CVTouch panels */
 	{ .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,

drivers/hid/hid-picolcd_backlight.c

@@ -94,8 +94,7 @@ void picolcd_exit_backlight(struct picolcd_data *data)
 	struct backlight_device *bdev = data->backlight;
 
 	data->backlight = NULL;
-	if (bdev)
-		backlight_device_unregister(bdev);
+	backlight_device_unregister(bdev);
 }
 
 int picolcd_resume_backlight(struct picolcd_data *data)

drivers/hid/hid-picolcd_cir.c

@@ -145,7 +145,6 @@ void picolcd_exit_cir(struct picolcd_data *data)
 	struct rc_dev *rdev = data->rc_dev;
 
 	data->rc_dev = NULL;
-	if (rdev)
-		rc_unregister_device(rdev);
+	rc_unregister_device(rdev);
 }
 

drivers/hid/hid-picolcd_lcd.c

@@ -92,8 +92,7 @@ void picolcd_exit_lcd(struct picolcd_data *data)
 	struct lcd_device *ldev = data->lcd;
 
 	data->lcd = NULL;
-	if (ldev)
-		lcd_device_unregister(ldev);
+	lcd_device_unregister(ldev);
 }
 
 int picolcd_resume_lcd(struct picolcd_data *data)

drivers/hid/hid-rmi.c

@@ -33,10 +33,21 @@
 #define RMI_READ_DATA_PENDING		1
 #define RMI_STARTED			2
 
+#define RMI_SLEEP_NORMAL		0x0
+#define RMI_SLEEP_DEEP_SLEEP		0x1
+
 /* device flags */
 #define RMI_DEVICE			BIT(0)
 #define RMI_DEVICE_HAS_PHYS_BUTTONS	BIT(1)
 
+/*
+ * retrieve the ctrl registers
+ * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
+ * and there is no way to know if the first 20 bytes are here or not.
+ * We use only the first 12 bytes, so get only them.
+ */
+#define RMI_F11_CTRL_REG_COUNT		12
+
 enum rmi_mode_type {
 	RMI_MODE_OFF			= 0,
 	RMI_MODE_ATTN_REPORTS		= 1,
@@ -113,6 +124,8 @@ struct rmi_data {
 	unsigned int max_y;
 	unsigned int x_size_mm;
 	unsigned int y_size_mm;
+	bool read_f11_ctrl_regs;
+	u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT];
 
 	unsigned int gpio_led_count;
 	unsigned int button_count;
@@ -126,6 +139,10 @@ struct rmi_data {
 
 	unsigned long device_flags;
 	unsigned long firmware_id;
+
+	u8 f01_ctrl0;
+	u8 interrupt_enable_mask;
+	bool restore_interrupt_mask;
 };
 
 #define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
@@ -346,13 +363,34 @@ static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
 	}
 }
 
+static int rmi_reset_attn_mode(struct hid_device *hdev)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int ret;
+
+	ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+	if (ret)
+		return ret;
+
+	if (data->restore_interrupt_mask) {
+		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
+				&data->interrupt_enable_mask);
+		if (ret) {
+			hid_err(hdev, "can not write F01 control register\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static void rmi_reset_work(struct work_struct *work)
 {
 	struct rmi_data *hdata = container_of(work, struct rmi_data,
 						reset_work);
 
 	/* switch the device to RMI if we receive a generic mouse report */
-	rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
+	rmi_reset_attn_mode(hdata->hdev);
 }
 
 static inline int rmi_schedule_reset(struct hid_device *hdev)
@@ -532,14 +570,77 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field,
 }
 
 #ifdef CONFIG_PM
+static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int ret;
+	u8 f01_ctrl0;
+
+	f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode;
+
+	ret = rmi_write(hdev, data->f01.control_base_addr,
+			&f01_ctrl0);
+	if (ret) {
+		hid_err(hdev, "can not write sleep mode\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_suspend(struct hid_device *hdev, pm_message_t message)
+{
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int ret;
+	u8 buf[RMI_F11_CTRL_REG_COUNT];
+
+	ret = rmi_read_block(hdev, data->f11.control_base_addr, buf,
+				RMI_F11_CTRL_REG_COUNT);
+	if (ret)
+		hid_warn(hdev, "can not read F11 control registers\n");
+	else
+		memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT);
+
+
+	if (!device_may_wakeup(hdev->dev.parent))
+		return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP);
+
+	return 0;
+}
+
 static int rmi_post_reset(struct hid_device *hdev)
 {
-	return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+	struct rmi_data *data = hid_get_drvdata(hdev);
+	int ret;
+
+	ret = rmi_reset_attn_mode(hdev);
+	if (ret) {
+		hid_err(hdev, "can not set rmi mode\n");
+		return ret;
+	}
+
+	if (data->read_f11_ctrl_regs) {
+		ret = rmi_write_block(hdev, data->f11.control_base_addr,
+				data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
+		if (ret)
+			hid_warn(hdev,
+				"can not write F11 control registers after reset\n");
+	}
+
+	if (!device_may_wakeup(hdev->dev.parent)) {
+		ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL);
+		if (ret) {
+			hid_err(hdev, "can not write sleep mode\n");
+			return ret;
+		}
+	}
+
+	return ret;
 }
 
 static int rmi_post_resume(struct hid_device *hdev)
 {
-	return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+	return rmi_reset_attn_mode(hdev);
 }
 #endif /* CONFIG_PM */
 
@@ -595,6 +696,7 @@ static void rmi_register_function(struct rmi_data *data,
 		f->interrupt_count = pdt_entry->interrupt_source_count;
 		f->irq_mask = rmi_gen_mask(f->interrupt_base,
 						f->interrupt_count);
+		data->interrupt_enable_mask |= f->irq_mask;
 	}
 }
 
@@ -732,6 +834,35 @@ static int rmi_populate_f01(struct hid_device *hdev)
 		data->firmware_id += info[2] * 65536;
 	}
 
+	ret = rmi_read_block(hdev, data->f01.control_base_addr, info,
+				2);
+
+	if (ret) {
+		hid_err(hdev, "can not read f01 ctrl registers\n");
+		return ret;
+	}
+
+	data->f01_ctrl0 = info[0];
+
+	if (!info[1]) {
+		/*
+		 * Do to a firmware bug in some touchpads the F01 interrupt
+		 * enable control register will be cleared on reset.
+		 * This will stop the touchpad from reporting data, so
+		 * if F01 CTRL1 is 0 then we need to explicitly enable
+		 * interrupts for the functions we want data for.
+		 */
+		data->restore_interrupt_mask = true;
+
+		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
+				&data->interrupt_enable_mask);
+		if (ret) {
+			hid_err(hdev, "can not write to control reg 1: %d.\n",
+				ret);
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
@@ -904,24 +1035,23 @@ static int rmi_populate_f11(struct hid_device *hdev)
 	if (has_data40)
 		data->f11.report_size += data->max_fingers * 2;
 
-	/*
-	 * retrieve the ctrl registers
-	 * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
-	 * and there is no way to know if the first 20 bytes are here or not.
-	 * We use only the first 12 bytes, so get only them.
-	 */
-	ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 12);
+	ret = rmi_read_block(hdev, data->f11.control_base_addr,
+			data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
 	if (ret) {
 		hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
 		return ret;
 	}
 
-	data->max_x = buf[6] | (buf[7] << 8);
-	data->max_y = buf[8] | (buf[9] << 8);
+	/* data->f11_ctrl_regs now contains valid register data */
+	data->read_f11_ctrl_regs = true;
+
+	data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8);
+	data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8);
 
 	if (has_dribble) {
-		buf[0] = buf[0] & ~BIT(6);
-		ret = rmi_write(hdev, data->f11.control_base_addr, buf);
+		data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6);
+		ret = rmi_write(hdev, data->f11.control_base_addr,
+				data->f11_ctrl_regs);
 		if (ret) {
 			hid_err(hdev, "can not write to control reg 0: %d.\n",
 				ret);
@@ -930,9 +1060,9 @@ static int rmi_populate_f11(struct hid_device *hdev)
 	}
 
 	if (has_palm_detect) {
-		buf[11] = buf[11] & ~BIT(0);
+		data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0);
 		ret = rmi_write(hdev, data->f11.control_base_addr + 11,
-				&buf[11]);
+				&data->f11_ctrl_regs[11]);
 		if (ret) {
 			hid_err(hdev, "can not write to control reg 11: %d.\n",
 				ret);
@@ -1273,6 +1403,7 @@ static struct hid_driver rmi_driver = {
 	.input_mapping		= rmi_input_mapping,
 	.input_configured	= rmi_input_configured,
 #ifdef CONFIG_PM
+	.suspend		= rmi_suspend,
 	.resume			= rmi_post_resume,
 	.reset_resume		= rmi_post_reset,
 #endif

drivers/hid/hid-sensor-hub.c

@@ -774,6 +774,9 @@ static const struct hid_device_id sensor_hub_devices[] = {
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_TEXAS_INSTRUMENTS,
 			USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_ITE,
+			USB_DEVICE_ID_ITE_LENOVO_YOGA),
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, HID_ANY_ID,
 		     HID_ANY_ID) },
 	{ }

drivers/hid/hid-sony.c

@@ -296,7 +296,14 @@ static __u8 navigation_rdesc[] = {
 	0x09, 0x01,         /*          Usage (Pointer),            */
 	0x81, 0x02,         /*          Input (Variable),           */
 	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
-	0x95, 0x20,         /*          Report Count (26),          */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x09, 0x01,         /*          Usage (Pointer),            */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+	0x95, 0x1E,         /*          Report Count (24),          */
 	0x81, 0x02,         /*          Input (Variable),           */
 	0x75, 0x08,         /*          Report Size (8),            */
 	0x95, 0x30,         /*          Report Count (48),          */
@@ -1270,6 +1277,17 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 	 * has to be BYTE_SWAPPED before passing up to joystick interface
 	 */
 	if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
+		/*
+		 * When connected via Bluetooth the Sixaxis occasionally sends
+		 * a report with the second byte 0xff and the rest zeroed.
+		 *
+		 * This report does not reflect the actual state of the
+		 * controller must be ignored to avoid generating false input
+		 * events.
+		 */
+		if (rd[1] == 0xff)
+			return -EINVAL;
+
 		swap(rd[41], rd[42]);
 		swap(rd[43], rd[44]);
 		swap(rd[45], rd[46]);
@@ -1836,7 +1854,7 @@ static void dualshock4_state_worker(struct work_struct *work)
 	} else {
 		memset(buf, 0, DS4_REPORT_0x11_SIZE);
 		buf[0] = 0x11;
-		buf[1] = 0xB0;
+		buf[1] = 0x80;
 		buf[3] = 0x0F;
 		offset = 6;
 	}

drivers/hid/i2c-hid/i2c-hid.c

@@ -149,6 +149,8 @@ struct i2c_hid {
 	int			irq;
 
 	struct i2c_hid_platform_data pdata;
+
+	bool			irq_wake_enabled;
 };
 
 static int __i2c_hid_command(struct i2c_client *client,
@@ -1091,14 +1093,21 @@ static int i2c_hid_suspend(struct device *dev)
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
 	int ret = 0;
-
-	disable_irq(ihid->irq);
-	if (device_may_wakeup(&client->dev))
-		enable_irq_wake(ihid->irq);
+	int wake_status;
 
 	if (hid->driver && hid->driver->suspend)
 		ret = hid->driver->suspend(hid, PMSG_SUSPEND);
 
+	disable_irq(ihid->irq);
+	if (device_may_wakeup(&client->dev)) {
+		wake_status = enable_irq_wake(ihid->irq);
+		if (!wake_status)
+			ihid->irq_wake_enabled = true;
+		else
+			hid_warn(hid, "Failed to enable irq wake: %d\n",
+				wake_status);
+	}
+
 	/* Save some power */
 	i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
 
@@ -1111,14 +1120,21 @@ static int i2c_hid_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
+	int wake_status;
 
 	enable_irq(ihid->irq);
 	ret = i2c_hid_hwreset(client);
 	if (ret)
 		return ret;
 
-	if (device_may_wakeup(&client->dev))
-		disable_irq_wake(ihid->irq);
+	if (device_may_wakeup(&client->dev) && ihid->irq_wake_enabled) {
+		wake_status = disable_irq_wake(ihid->irq);
+		if (!wake_status)
+			ihid->irq_wake_enabled = false;
+		else
+			hid_warn(hid, "Failed to disable irq wake: %d\n",
+				wake_status);
+	}
 
 	if (hid->driver && hid->driver->reset_resume) {
 		ret = hid->driver->reset_resume(hid);

drivers/hid/wacom.h

@@ -113,7 +113,7 @@ struct wacom {
 	struct mutex lock;
 	struct work_struct work;
 	struct wacom_led {
-		u8 select[2]; /* status led selector (0..3) */
+		u8 select[5]; /* status led selector (0..3) */
 		u8 llv;       /* status led brightness no button (1..127) */
 		u8 hlv;       /* status led brightness button pressed (1..127) */
 		u8 img_lum;   /* OLED matrix display brightness */
@@ -123,6 +123,8 @@ struct wacom {
 	struct power_supply *ac;
 	struct power_supply_desc battery_desc;
 	struct power_supply_desc ac_desc;
+	struct kobject *remote_dir;
+	struct attribute_group remote_group[5];
 };
 
 static inline void wacom_schedule_work(struct wacom_wac *wacom_wac)
@@ -147,4 +149,7 @@ int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
 		struct hid_usage *usage, __s32 value);
 void wacom_wac_report(struct hid_device *hdev, struct hid_report *report);
 void wacom_battery_work(struct work_struct *work);
+int wacom_remote_create_attr_group(struct wacom *wacom, __u32 serial,
+				   int index);
+void wacom_remote_destroy_attr_group(struct wacom *wacom, __u32 serial);
 #endif

drivers/hid/wacom_sys.c

@@ -23,9 +23,13 @@
 #define WAC_CMD_ICON_XFER	0x23
 #define WAC_CMD_ICON_BT_XFER	0x26
 #define WAC_CMD_RETRIES		10
+#define WAC_CMD_DELETE_PAIRING	0x20
+#define WAC_CMD_UNPAIR_ALL	0xFF
+#define WAC_REMOTE_SERIAL_MAX_STRLEN	9
 
 #define DEV_ATTR_RW_PERM (S_IRUGO | S_IWUSR | S_IWGRP)
 #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP)
+#define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP)
 
 static int wacom_get_report(struct hid_device *hdev, u8 type, u8 *buf,
 			    size_t size, unsigned int retries)
@@ -453,12 +457,11 @@ static void wacom_retrieve_hid_descriptor(struct hid_device *hdev,
 	 * interface number.
 	 */
 	if (features->type == WIRELESS) {
-		if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
+		if (intf->cur_altsetting->desc.bInterfaceNumber == 0)
+			features->device_type = WACOM_DEVICETYPE_WL_MONITOR;
+		else
 			features->device_type = WACOM_DEVICETYPE_NONE;
-		} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
-			features->device_type |= WACOM_DEVICETYPE_TOUCH;
-			features->pktlen = WACOM_PKGLEN_BBTOUCH3;
-		}
+		return;
 	}
 
 	wacom_parse_hid(hdev, features);
@@ -1120,6 +1123,189 @@ static ssize_t wacom_store_speed(struct device *dev,
 static DEVICE_ATTR(speed, DEV_ATTR_RW_PERM,
 		wacom_show_speed, wacom_store_speed);
 
+
+static ssize_t wacom_show_remote_mode(struct kobject *kobj,
+				      struct kobj_attribute *kattr,
+				      char *buf, int index)
+{
+	struct device *dev = container_of(kobj->parent, struct device, kobj);
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	struct wacom *wacom = hid_get_drvdata(hdev);
+	u8 mode;
+
+	mode = wacom->led.select[index];
+	if (mode >= 0 && mode < 3)
+		return snprintf(buf, PAGE_SIZE, "%d\n", mode);
+	else
+		return snprintf(buf, PAGE_SIZE, "%d\n", -1);
+}
+
+#define DEVICE_EKR_ATTR_GROUP(SET_ID)					\
+static ssize_t wacom_show_remote##SET_ID##_mode(struct kobject *kobj,	\
+			       struct kobj_attribute *kattr, char *buf)	\
+{									\
+	return wacom_show_remote_mode(kobj, kattr, buf, SET_ID);	\
+}									\
+static struct kobj_attribute remote##SET_ID##_mode_attr = {		\
+	.attr = {.name = "remote_mode",					\
+		.mode = DEV_ATTR_RO_PERM},				\
+	.show = wacom_show_remote##SET_ID##_mode,			\
+};									\
+static struct attribute *remote##SET_ID##_serial_attrs[] = {		\
+	&remote##SET_ID##_mode_attr.attr,				\
+	NULL								\
+};									\
+static struct attribute_group remote##SET_ID##_serial_group = {		\
+	.name = NULL,							\
+	.attrs = remote##SET_ID##_serial_attrs,				\
+}
+
+DEVICE_EKR_ATTR_GROUP(0);
+DEVICE_EKR_ATTR_GROUP(1);
+DEVICE_EKR_ATTR_GROUP(2);
+DEVICE_EKR_ATTR_GROUP(3);
+DEVICE_EKR_ATTR_GROUP(4);
+
+int wacom_remote_create_attr_group(struct wacom *wacom, __u32 serial, int index)
+{
+	int error = 0;
+	char *buf;
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+
+	wacom_wac->serial[index] = serial;
+
+	buf = kzalloc(WAC_REMOTE_SERIAL_MAX_STRLEN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	snprintf(buf, WAC_REMOTE_SERIAL_MAX_STRLEN, "%d", serial);
+	wacom->remote_group[index].name = buf;
+
+	error = sysfs_create_group(wacom->remote_dir,
+				   &wacom->remote_group[index]);
+	if (error) {
+		hid_err(wacom->hdev,
+			"cannot create sysfs group err: %d\n", error);
+		kobject_put(wacom->remote_dir);
+		return error;
+	}
+
+	return 0;
+}
+
+void wacom_remote_destroy_attr_group(struct wacom *wacom, __u32 serial)
+{
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	int i;
+
+	if (!serial)
+		return;
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (wacom_wac->serial[i] == serial) {
+			wacom_wac->serial[i] = 0;
+			wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
+			if (wacom->remote_group[i].name) {
+				sysfs_remove_group(wacom->remote_dir,
+						   &wacom->remote_group[i]);
+				kfree(wacom->remote_group[i].name);
+				wacom->remote_group[i].name = NULL;
+			}
+		}
+	}
+}
+
+static int wacom_cmd_unpair_remote(struct wacom *wacom, unsigned char selector)
+{
+	const size_t buf_size = 2;
+	unsigned char *buf;
+	int retval;
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = WAC_CMD_DELETE_PAIRING;
+	buf[1] = selector;
+
+	retval = wacom_set_report(wacom->hdev, HID_OUTPUT_REPORT, buf,
+				  buf_size, WAC_CMD_RETRIES);
+	kfree(buf);
+
+	return retval;
+}
+
+static ssize_t wacom_store_unpair_remote(struct kobject *kobj,
+					 struct kobj_attribute *attr,
+					 const char *buf, size_t count)
+{
+	unsigned char selector = 0;
+	struct device *dev = container_of(kobj->parent, struct device, kobj);
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	struct wacom *wacom = hid_get_drvdata(hdev);
+	int err;
+
+	if (!strncmp(buf, "*\n", 2)) {
+		selector = WAC_CMD_UNPAIR_ALL;
+	} else {
+		hid_info(wacom->hdev, "remote: unrecognized unpair code: %s\n",
+			 buf);
+		return -1;
+	}
+
+	mutex_lock(&wacom->lock);
+
+	err = wacom_cmd_unpair_remote(wacom, selector);
+	mutex_unlock(&wacom->lock);
+
+	return err < 0 ? err : count;
+}
+
+static struct kobj_attribute unpair_remote_attr = {
+	.attr = {.name = "unpair_remote", .mode = 0200},
+	.store = wacom_store_unpair_remote,
+};
+
+static const struct attribute *remote_unpair_attrs[] = {
+	&unpair_remote_attr.attr,
+	NULL
+};
+
+static int wacom_initialize_remote(struct wacom *wacom)
+{
+	int error = 0;
+	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
+	int i;
+
+	if (wacom->wacom_wac.features.type != REMOTE)
+		return 0;
+
+	wacom->remote_group[0] = remote0_serial_group;
+	wacom->remote_group[1] = remote1_serial_group;
+	wacom->remote_group[2] = remote2_serial_group;
+	wacom->remote_group[3] = remote3_serial_group;
+	wacom->remote_group[4] = remote4_serial_group;
+
+	wacom->remote_dir = kobject_create_and_add("wacom_remote",
+						   &wacom->hdev->dev.kobj);
+	if (!wacom->remote_dir)
+		return -ENOMEM;
+
+	error = sysfs_create_files(wacom->remote_dir, remote_unpair_attrs);
+
+	if (error) {
+		hid_err(wacom->hdev,
+			"cannot create sysfs group err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
+		wacom_wac->serial[i] = 0;
+	}
+
+	return 0;
+}
+
 static struct input_dev *wacom_allocate_input(struct wacom *wacom)
 {
 	struct input_dev *input_dev;
@@ -1130,7 +1316,7 @@ static struct input_dev *wacom_allocate_input(struct wacom *wacom)
 	if (!input_dev)
 		return NULL;
 
-	input_dev->name = wacom_wac->pen_name;
+	input_dev->name = wacom_wac->features.name;
 	input_dev->phys = hdev->phys;
 	input_dev->dev.parent = &hdev->dev;
 	input_dev->open = wacom_open;
@@ -1145,40 +1331,6 @@ static struct input_dev *wacom_allocate_input(struct wacom *wacom)
 	return input_dev;
 }
 
-static void wacom_free_inputs(struct wacom *wacom)
-{
-	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
-
-	input_free_device(wacom_wac->pen_input);
-	input_free_device(wacom_wac->touch_input);
-	input_free_device(wacom_wac->pad_input);
-	wacom_wac->pen_input = NULL;
-	wacom_wac->touch_input = NULL;
-	wacom_wac->pad_input = NULL;
-}
-
-static int wacom_allocate_inputs(struct wacom *wacom)
-{
-	struct input_dev *pen_input_dev, *touch_input_dev, *pad_input_dev;
-	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
-
-	pen_input_dev = wacom_allocate_input(wacom);
-	touch_input_dev = wacom_allocate_input(wacom);
-	pad_input_dev = wacom_allocate_input(wacom);
-	if (!pen_input_dev || !touch_input_dev || !pad_input_dev) {
-		wacom_free_inputs(wacom);
-		return -ENOMEM;
-	}
-
-	wacom_wac->pen_input = pen_input_dev;
-	wacom_wac->touch_input = touch_input_dev;
-	wacom_wac->touch_input->name = wacom_wac->touch_name;
-	wacom_wac->pad_input = pad_input_dev;
-	wacom_wac->pad_input->name = wacom_wac->pad_name;
-
-	return 0;
-}
-
 static void wacom_clean_inputs(struct wacom *wacom)
 {
 	if (wacom->wacom_wac.pen_input) {
@@ -1199,12 +1351,33 @@ static void wacom_clean_inputs(struct wacom *wacom)
 		else
 			input_free_device(wacom->wacom_wac.pad_input);
 	}
+	if (wacom->remote_dir)
+		kobject_put(wacom->remote_dir);
 	wacom->wacom_wac.pen_input = NULL;
 	wacom->wacom_wac.touch_input = NULL;
 	wacom->wacom_wac.pad_input = NULL;
 	wacom_destroy_leds(wacom);
 }
 
+static int wacom_allocate_inputs(struct wacom *wacom)
+{
+	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
+
+	wacom_wac->pen_input = wacom_allocate_input(wacom);
+	wacom_wac->touch_input = wacom_allocate_input(wacom);
+	wacom_wac->pad_input = wacom_allocate_input(wacom);
+	if (!wacom_wac->pen_input || !wacom_wac->touch_input || !wacom_wac->pad_input) {
+		wacom_clean_inputs(wacom);
+		return -ENOMEM;
+	}
+
+	wacom_wac->pen_input->name = wacom_wac->pen_name;
+	wacom_wac->touch_input->name = wacom_wac->touch_name;
+	wacom_wac->pad_input->name = wacom_wac->pad_name;
+
+	return 0;
+}
+
 static int wacom_register_inputs(struct wacom *wacom)
 {
 	struct input_dev *pen_input_dev, *touch_input_dev, *pad_input_dev;
@@ -1259,10 +1432,16 @@ static int wacom_register_inputs(struct wacom *wacom)
 		error = wacom_initialize_leds(wacom);
 		if (error)
 			goto fail_leds;
+
+		error = wacom_initialize_remote(wacom);
+		if (error)
+			goto fail_remote;
 	}
 
 	return 0;
 
+fail_remote:
+	wacom_destroy_leds(wacom);
 fail_leds:
 	input_unregister_device(pad_input_dev);
 	pad_input_dev = NULL;
@@ -1553,11 +1732,9 @@ static int wacom_probe(struct hid_device *hdev,
 	mutex_init(&wacom->lock);
 	INIT_WORK(&wacom->work, wacom_wireless_work);
 
-	if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
-		error = wacom_allocate_inputs(wacom);
-		if (error)
-			goto fail_allocate_inputs;
-	}
+	error = wacom_allocate_inputs(wacom);
+	if (error)
+		goto fail_allocate_inputs;
 
 	/*
 	 * Bamboo Pad has a generic hid handling for the Pen, and we switch it
@@ -1603,18 +1780,16 @@ static int wacom_probe(struct hid_device *hdev,
 	if (error)
 		goto fail_shared_data;
 
-	if (!(features->quirks & WACOM_QUIRK_MONITOR) &&
+	if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
 	     (features->quirks & WACOM_QUIRK_BATTERY)) {
 		error = wacom_initialize_battery(wacom);
 		if (error)
 			goto fail_battery;
 	}
 
-	if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
-		error = wacom_register_inputs(wacom);
-		if (error)
-			goto fail_register_inputs;
-	}
+	error = wacom_register_inputs(wacom);
+	if (error)
+		goto fail_register_inputs;
 
 	if (hdev->bus == BUS_BLUETOOTH) {
 		error = device_create_file(&hdev->dev, &dev_attr_speed);
@@ -1637,7 +1812,7 @@ static int wacom_probe(struct hid_device *hdev,
 	/* Note that if query fails it is not a hard failure */
 	wacom_query_tablet_data(hdev, features);
 
-	if (features->quirks & WACOM_QUIRK_MONITOR)
+	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
 		error = hid_hw_open(hdev);
 
 	if (wacom_wac->features.type == INTUOSHT && 
@@ -1711,7 +1886,6 @@ static struct hid_driver wacom_driver = {
 	.id_table =	wacom_ids,
 	.probe =	wacom_probe,
 	.remove =	wacom_remove,
-	.event =	wacom_wac_event,
 	.report =	wacom_wac_report,
 #ifdef CONFIG_PM
 	.resume =	wacom_resume,

drivers/hid/wacom_wac.c

@@ -125,61 +125,47 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
 
 	prox = data[1] & 0x40;
 
-	if (prox) {
-		wacom->id[0] = ERASER_DEVICE_ID;
-		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
-		if (features->pressure_max > 255)
-			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
-		pressure += (features->pressure_max + 1) / 2;
-
-		/*
-		 * if going from out of proximity into proximity select between the eraser
-		 * and the pen based on the state of the stylus2 button, choose eraser if
-		 * pressed else choose pen. if not a proximity change from out to in, send
-		 * an out of proximity for previous tool then a in for new tool.
-		 */
-		if (!wacom->tool[0]) {
-			/* Eraser bit set for DTF */
-			if (data[1] & 0x10)
-				wacom->tool[1] = BTN_TOOL_RUBBER;
-			else
-				/* Going into proximity select tool */
-				wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-		} else {
-			/* was entered with stylus2 pressed */
-			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
-				/* report out proximity for previous tool */
-				input_report_key(input, wacom->tool[1], 0);
-				input_sync(input);
-				wacom->tool[1] = BTN_TOOL_PEN;
-				return 0;
-			}
+	if (!wacom->id[0]) {
+		if ((data[0] & 0x10) || (data[4] & 0x20)) {
+			wacom->tool[0] = BTN_TOOL_RUBBER;
+			wacom->id[0] = ERASER_DEVICE_ID;
 		}
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
+		else {
+			wacom->tool[0] = BTN_TOOL_PEN;
 			wacom->id[0] = STYLUS_DEVICE_ID;
 		}
-		input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */
-		input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
-		input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
-		input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
-		input_report_abs(input, ABS_PRESSURE, pressure);
+	}
 
-		input_report_key(input, BTN_TOUCH, data[4] & 0x08);
-		input_report_key(input, BTN_STYLUS, data[4] & 0x10);
-		/* Only allow the stylus2 button to be reported for the pen tool. */
-		input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
-	} else {
-		/* report proximity-out of a (valid) tool */
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
-		}
-		input_report_key(input, wacom->tool[1], prox);
+	/* If the eraser is in prox, STYLUS2 is always set. If we
+	 * mis-detected the type and notice that STYLUS2 isn't set
+	 * then force the eraser out of prox and let the pen in.
+	 */
+	if (wacom->tool[0] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
+		input_report_key(input, BTN_TOOL_RUBBER, 0);
+		input_report_abs(input, ABS_MISC, 0);
+		input_sync(input);
+		wacom->tool[0] = BTN_TOOL_PEN;
+		wacom->id[0] = STYLUS_DEVICE_ID;
 	}
 
-	wacom->tool[0] = prox; /* Save proximity state */
+	pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
+	if (features->pressure_max > 255)
+		pressure = (pressure << 1) | ((data[4] >> 6) & 1);
+	pressure += (features->pressure_max + 1) / 2;
+
+	input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+	input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
+	input_report_abs(input, ABS_PRESSURE, pressure);
+
+	input_report_key(input, BTN_TOUCH, data[4] & 0x08);
+	input_report_key(input, BTN_STYLUS, data[4] & 0x10);
+	/* Only allow the stylus2 button to be reported for the pen tool. */
+	input_report_key(input, BTN_STYLUS2, (wacom->tool[0] == BTN_TOOL_PEN) && (data[4] & 0x20));
+
+	if (!prox)
+		wacom->id[0] = 0;
+	input_report_key(input, wacom->tool[0], prox);
+	input_report_abs(input, ABS_MISC, wacom->id[0]);
 	return 1;
 }
 
@@ -645,6 +631,130 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 	return 0;
 }
 
+static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	unsigned char *data = wacom_wac->data;
+	struct input_dev *input = wacom_wac->pad_input;
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	struct wacom_features *features = &wacom_wac->features;
+	int bat_charging, bat_percent, touch_ring_mode;
+	__u32 serial;
+	int i;
+
+	if (data[0] != WACOM_REPORT_REMOTE) {
+		dev_dbg(input->dev.parent,
+			"%s: received unknown report #%d", __func__, data[0]);
+		return 0;
+	}
+
+	serial = data[3] + (data[4] << 8) + (data[5] << 16);
+	wacom_wac->id[0] = PAD_DEVICE_ID;
+
+	input_report_key(input, BTN_0, (data[9] & 0x01));
+	input_report_key(input, BTN_1, (data[9] & 0x02));
+	input_report_key(input, BTN_2, (data[9] & 0x04));
+	input_report_key(input, BTN_3, (data[9] & 0x08));
+	input_report_key(input, BTN_4, (data[9] & 0x10));
+	input_report_key(input, BTN_5, (data[9] & 0x20));
+	input_report_key(input, BTN_6, (data[9] & 0x40));
+	input_report_key(input, BTN_7, (data[9] & 0x80));
+
+	input_report_key(input, BTN_8, (data[10] & 0x01));
+	input_report_key(input, BTN_9, (data[10] & 0x02));
+	input_report_key(input, BTN_A, (data[10] & 0x04));
+	input_report_key(input, BTN_B, (data[10] & 0x08));
+	input_report_key(input, BTN_C, (data[10] & 0x10));
+	input_report_key(input, BTN_X, (data[10] & 0x20));
+	input_report_key(input, BTN_Y, (data[10] & 0x40));
+	input_report_key(input, BTN_Z, (data[10] & 0x80));
+
+	input_report_key(input, BTN_BASE, (data[11] & 0x01));
+	input_report_key(input, BTN_BASE2, (data[11] & 0x02));
+
+	if (data[12] & 0x80)
+		input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
+	else
+		input_report_abs(input, ABS_WHEEL, 0);
+
+	bat_percent = data[7] & 0x7f;
+	bat_charging = !!(data[7] & 0x80);
+
+	if (data[9] | data[10] | (data[11] & 0x03) | data[12])
+		input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+	else
+		input_report_abs(input, ABS_MISC, 0);
+
+	input_event(input, EV_MSC, MSC_SERIAL, serial);
+
+	/*Which mode select (LED light) is currently on?*/
+	touch_ring_mode = (data[11] & 0xC0) >> 6;
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		if (wacom_wac->serial[i] == serial)
+			wacom->led.select[i] = touch_ring_mode;
+	}
+
+	if (!wacom->battery &&
+	    !(features->quirks & WACOM_QUIRK_BATTERY)) {
+		features->quirks |= WACOM_QUIRK_BATTERY;
+		INIT_WORK(&wacom->work, wacom_battery_work);
+		wacom_schedule_work(wacom_wac);
+	}
+
+	wacom_notify_battery(wacom_wac, bat_percent, bat_charging, 1,
+			     bat_charging);
+
+	return 1;
+}
+
+static int wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
+{
+	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+	unsigned char *data = wacom_wac->data;
+	int i;
+
+	if (data[0] != WACOM_REPORT_DEVICE_LIST)
+		return 0;
+
+	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
+		int j = i * 6;
+		int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
+		bool connected = data[j+2];
+
+		if (connected) {
+			int k;
+
+			if (wacom_wac->serial[i] == serial)
+				continue;
+
+			if (wacom_wac->serial[i]) {
+				wacom_remote_destroy_attr_group(wacom,
+							wacom_wac->serial[i]);
+			}
+
+			/* A remote can pair more than once with an EKR,
+			 * check to make sure this serial isn't already paired.
+			 */
+			for (k = 0; k < WACOM_MAX_REMOTES; k++) {
+				if (wacom_wac->serial[k] == serial)
+					break;
+			}
+
+			if (k < WACOM_MAX_REMOTES) {
+				wacom_wac->serial[i] = serial;
+				continue;
+			}
+			wacom_remote_create_attr_group(wacom, serial, i);
+
+		} else if (wacom_wac->serial[i]) {
+			wacom_remote_destroy_attr_group(wacom,
+							wacom_wac->serial[i]);
+		}
+	}
+
+	return 0;
+}
+
 static void wacom_intuos_general(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
@@ -1437,6 +1547,12 @@ static int wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field,
 	return 0;
 }
 
+static void wacom_wac_pen_pre_report(struct hid_device *hdev,
+		struct hid_report *report)
+{
+	return;
+}
+
 static void wacom_wac_pen_report(struct hid_device *hdev,
 		struct hid_report *report)
 {
@@ -1491,6 +1607,13 @@ static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
 			wacom_map_usage(input, usage, field, EV_ABS,
 					ABS_MT_POSITION_Y, 4);
 		break;
+	case HID_DG_WIDTH:
+	case HID_DG_HEIGHT:
+		features->last_slot_field = usage->hid;
+		wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
+		wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MINOR, 0);
+		input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+		break;
 	case HID_DG_CONTACTID:
 		features->last_slot_field = usage->hid;
 		break;
@@ -1504,6 +1627,10 @@ static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
 		features->last_slot_field = usage->hid;
 		wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
 		break;
+	case HID_DG_CONTACTCOUNT:
+		wacom_wac->hid_data.cc_index = field->index;
+		wacom_wac->hid_data.cc_value_index = usage->usage_index;
+		break;
 	}
 }
 
@@ -1515,6 +1642,10 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	bool prox = hid_data->tipswitch &&
 		    !wacom_wac->shared->stylus_in_proximity;
 
+	wacom_wac->hid_data.num_received++;
+	if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
+		return;
+
 	if (mt) {
 		int slot;
 
@@ -1531,6 +1662,13 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 				 hid_data->x);
 		input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y,
 				 hid_data->y);
+
+		if (test_bit(ABS_MT_TOUCH_MAJOR, input->absbit)) {
+			input_report_abs(input, ABS_MT_TOUCH_MAJOR, max(hid_data->width, hid_data->height));
+			input_report_abs(input, ABS_MT_TOUCH_MINOR, min(hid_data->width, hid_data->height));
+			if (hid_data->width != hid_data->height)
+				input_report_abs(input, ABS_MT_ORIENTATION, hid_data->width <= hid_data->height ? 0 : 1);
+		}
 	}
 }
 
@@ -1547,6 +1685,12 @@ static int wacom_wac_finger_event(struct hid_device *hdev,
 	case HID_GD_Y:
 		wacom_wac->hid_data.y = value;
 		break;
+	case HID_DG_WIDTH:
+		wacom_wac->hid_data.width = value;
+		break;
+	case HID_DG_HEIGHT:
+		wacom_wac->hid_data.height = value;
+		break;
 	case HID_DG_CONTACTID:
 		wacom_wac->hid_data.id = value;
 		break;
@@ -1564,6 +1708,24 @@ static int wacom_wac_finger_event(struct hid_device *hdev,
 	return 0;
 }
 
+static void wacom_wac_finger_pre_report(struct hid_device *hdev,
+		struct hid_report *report)
+{
+	struct wacom *wacom = hid_get_drvdata(hdev);
+	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+	struct hid_data* hid_data = &wacom_wac->hid_data;
+
+	if (hid_data->cc_index >= 0) {
+		struct hid_field *field = report->field[hid_data->cc_index];
+		int value = field->value[hid_data->cc_value_index];
+		if (value)
+			hid_data->num_expected = value;
+	}
+	else {
+		hid_data->num_expected = wacom_wac->features.touch_max;
+	}
+}
+
 static void wacom_wac_finger_report(struct hid_device *hdev,
 		struct hid_report *report)
 {
@@ -1572,10 +1734,18 @@ static void wacom_wac_finger_report(struct hid_device *hdev,
 	struct input_dev *input = wacom_wac->touch_input;
 	unsigned touch_max = wacom_wac->features.touch_max;
 
+	/* If more packets of data are expected, give us a chance to
+	 * process them rather than immediately syncing a partial
+	 * update.
+	 */
+	if (wacom_wac->hid_data.num_received < wacom_wac->hid_data.num_expected)
+		return;
+
 	if (touch_max > 1)
 		input_mt_sync_frame(input);
 
 	input_sync(input);
+	wacom_wac->hid_data.num_received = 0;
 
 	/* keep touch state for pen event */
 	wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
@@ -1615,6 +1785,25 @@ int wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
 	return 0;
 }
 
+static void wacom_report_events(struct hid_device *hdev, struct hid_report *report)
+{
+	int r;
+
+	for (r = 0; r < report->maxfield; r++) {
+		struct hid_field *field;
+		unsigned count, n;
+
+		field = report->field[r];
+		count = field->report_count;
+
+		if (!(HID_MAIN_ITEM_VARIABLE & field->flags))
+			continue;
+
+		for (n = 0; n < count; n++)
+			wacom_wac_event(hdev, field, &field->usage[n], field->value[n]);
+	}
+}
+
 void wacom_wac_report(struct hid_device *hdev, struct hid_report *report)
 {
 	struct wacom *wacom = hid_get_drvdata(hdev);
@@ -1624,6 +1813,14 @@ void wacom_wac_report(struct hid_device *hdev, struct hid_report *report)
 	if (wacom_wac->features.type != HID_GENERIC)
 		return;
 
+	if (WACOM_PEN_FIELD(field))
+		wacom_wac_pen_pre_report(hdev, report);
+
+	if (WACOM_FINGER_FIELD(field))
+		wacom_wac_finger_pre_report(hdev, report);
+
+	wacom_report_events(hdev, report);
+
 	if (WACOM_PEN_FIELD(field))
 		return wacom_wac_pen_report(hdev, report);
 
@@ -1699,7 +1896,7 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 		int y = (data[3] << 4) | (data[4] & 0x0f);
 		int width, height;
 
-		if (features->type >= INTUOSPS && features->type <= INTUOSPL) {
+		if (features->type >= INTUOSPS && features->type <= INTUOSHT) {
 			width  = data[5] * 100;
 			height = data[6] * 100;
 		} else {
@@ -2118,6 +2315,13 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_wireless_irq(wacom_wac, len);
 		break;
 
+	case REMOTE:
+		if (wacom_wac->data[0] == WACOM_REPORT_DEVICE_LIST)
+			sync = wacom_remote_status_irq(wacom_wac, len);
+		else
+			sync = wacom_remote_irq(wacom_wac, len);
+		break;
+
 	default:
 		sync = false;
 		break;
@@ -2223,10 +2427,13 @@ void wacom_setup_device_quirks(struct wacom *wacom)
 	 * 0, whose HID descriptor has an application usage of 0xFF0D
 	 * (i.e., WACOM_VENDORDEFINED_PEN). We route pen packets back
 	 * out through the HID_GENERIC device created for interface 1,
-	 * so rewrite this one to be of type BTN_TOOL_FINGER.
+	 * so rewrite this one to be of type WACOM_DEVICETYPE_TOUCH.
 	 */
 	if (features->type == BAMBOO_PAD)
-		features->device_type |= WACOM_DEVICETYPE_TOUCH;
+		features->device_type = WACOM_DEVICETYPE_TOUCH;
+
+	if (features->type == REMOTE)
+		features->device_type = WACOM_DEVICETYPE_PAD;
 
 	if (wacom->hdev->bus == BUS_BLUETOOTH)
 		features->quirks |= WACOM_QUIRK_BATTERY;
@@ -2242,13 +2449,7 @@ void wacom_setup_device_quirks(struct wacom *wacom)
 	}
 
 	if (features->type == WIRELESS) {
-
-		/* monitor never has input and pen/touch have delayed create */
-		features->quirks |= WACOM_QUIRK_NO_INPUT;
-
-		/* must be monitor interface if no device_type set */
-		if (features->device_type == WACOM_DEVICETYPE_NONE) {
-			features->quirks |= WACOM_QUIRK_MONITOR;
+		if (features->device_type == WACOM_DEVICETYPE_WL_MONITOR) {
 			features->quirks |= WACOM_QUIRK_BATTERY;
 		}
 	}
@@ -2513,11 +2714,23 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
 	return 0;
 }
 
+static void wacom_setup_numbered_buttons(struct input_dev *input_dev,
+				int button_count)
+{
+	int i;
+
+	for (i = 0; i < button_count && i < 10; i++)
+		__set_bit(BTN_0 + i, input_dev->keybit);
+	for (i = 10; i < button_count && i < 16; i++)
+		__set_bit(BTN_A + (i-10), input_dev->keybit);
+	for (i = 16; i < button_count && i < 18; i++)
+		__set_bit(BTN_BASE + (i-16), input_dev->keybit);
+}
+
 int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 				   struct wacom_wac *wacom_wac)
 {
 	struct wacom_features *features = &wacom_wac->features;
-	int i;
 
 	if (!(features->device_type & WACOM_DEVICETYPE_PAD))
 		return -ENODEV;
@@ -2534,10 +2747,14 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 	/* kept for making udev and libwacom accepting the pad */
 	__set_bit(BTN_STYLUS, input_dev->keybit);
 
+	wacom_setup_numbered_buttons(input_dev, features->numbered_buttons);
+
 	switch (features->type) {
+
+	case CINTIQ_HYBRID:
+	case DTK:
+	case DTUS:
 	case GRAPHIRE_BT:
-		__set_bit(BTN_0, input_dev->keybit);
-		__set_bit(BTN_1, input_dev->keybit);
 		break;
 
 	case WACOM_MO:
@@ -2555,16 +2772,6 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case WACOM_24HD:
-		__set_bit(BTN_A, input_dev->keybit);
-		__set_bit(BTN_B, input_dev->keybit);
-		__set_bit(BTN_C, input_dev->keybit);
-		__set_bit(BTN_X, input_dev->keybit);
-		__set_bit(BTN_Y, input_dev->keybit);
-		__set_bit(BTN_Z, input_dev->keybit);
-
-		for (i = 0; i < 10; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
 		__set_bit(KEY_PROG1, input_dev->keybit);
 		__set_bit(KEY_PROG2, input_dev->keybit);
 		__set_bit(KEY_PROG3, input_dev->keybit);
@@ -2586,12 +2793,6 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit);
 		break;
 
-	case DTK:
-		for (i = 0; i < 6; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		break;
-
 	case WACOM_22HD:
 		__set_bit(KEY_PROG1, input_dev->keybit);
 		__set_bit(KEY_PROG2, input_dev->keybit);
@@ -2599,52 +2800,22 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 		/* fall through */
 
 	case WACOM_21UX2:
-		__set_bit(BTN_A, input_dev->keybit);
-		__set_bit(BTN_B, input_dev->keybit);
-		__set_bit(BTN_C, input_dev->keybit);
-		__set_bit(BTN_X, input_dev->keybit);
-		__set_bit(BTN_Y, input_dev->keybit);
-		__set_bit(BTN_Z, input_dev->keybit);
-		__set_bit(BTN_BASE, input_dev->keybit);
-		__set_bit(BTN_BASE2, input_dev->keybit);
-		/* fall through */
-
 	case WACOM_BEE:
-		__set_bit(BTN_8, input_dev->keybit);
-		__set_bit(BTN_9, input_dev->keybit);
-		/* fall through */
-
 	case CINTIQ:
-		for (i = 0; i < 8; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
 		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
 		break;
 
 	case WACOM_13HD:
-		for (i = 0; i < 9; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		break;
 
 	case INTUOS3:
 	case INTUOS3L:
-		__set_bit(BTN_4, input_dev->keybit);
-		__set_bit(BTN_5, input_dev->keybit);
-		__set_bit(BTN_6, input_dev->keybit);
-		__set_bit(BTN_7, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
 		/* fall through */
 
 	case INTUOS3S:
-		__set_bit(BTN_0, input_dev->keybit);
-		__set_bit(BTN_1, input_dev->keybit);
-		__set_bit(BTN_2, input_dev->keybit);
-		__set_bit(BTN_3, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
 		break;
 
@@ -2652,15 +2823,8 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 	case INTUOS5L:
 	case INTUOSPM:
 	case INTUOSPL:
-		__set_bit(BTN_7, input_dev->keybit);
-		__set_bit(BTN_8, input_dev->keybit);
-		/* fall through */
-
 	case INTUOS5S:
 	case INTUOSPS:
-		for (i = 0; i < 7; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		break;
 
@@ -2675,28 +2839,10 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 
 	case INTUOS4:
 	case INTUOS4L:
-		__set_bit(BTN_7, input_dev->keybit);
-		__set_bit(BTN_8, input_dev->keybit);
-		/* fall through */
-
 	case INTUOS4S:
-		for (i = 0; i < 7; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
 		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
 		break;
 
-	case CINTIQ_HYBRID:
-		for (i = 0; i < 9; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-
-		break;
-
-	case DTUS:
-		for (i = 0; i < 4; i++)
-			__set_bit(BTN_0 + i, input_dev->keybit);
-		break;
-
 	case INTUOSHT:
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
@@ -2708,6 +2854,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
 
 		break;
 
+	case REMOTE:
+		input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+		input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+		break;
+
 	default:
 		/* no pad supported */
 		return -ENODEV;
@@ -2723,7 +2874,7 @@ static const struct wacom_features wacom_features_0x10 =
 	  GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
 static const struct wacom_features wacom_features_0x81 =
 	{ "Wacom Graphire BT", 16704, 12064, 511, 32,
-	  GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
+	  GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES, 2 };
 static const struct wacom_features wacom_features_0x11 =
 	{ "Wacom Graphire2 4x5", 10206, 7422, 511, 63,
 	  GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
@@ -2849,77 +3000,77 @@ static const struct wacom_features wacom_features_0x45 =
 	  INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xB0 =
 	{ "Wacom Intuos3 4x5", 25400, 20320, 1023, 63,
-	  INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
 static const struct wacom_features wacom_features_0xB1 =
 	{ "Wacom Intuos3 6x8", 40640, 30480, 1023, 63,
-	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xB2 =
 	{ "Wacom Intuos3 9x12", 60960, 45720, 1023, 63,
-	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xB3 =
 	{ "Wacom Intuos3 12x12", 60960, 60960, 1023, 63,
-	  INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xB4 =
 	{ "Wacom Intuos3 12x19", 97536, 60960, 1023, 63,
-	  INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xB5 =
 	{ "Wacom Intuos3 6x11", 54204, 31750, 1023, 63,
-	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xB7 =
 	{ "Wacom Intuos3 4x6", 31496, 19685, 1023, 63,
-	  INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
 static const struct wacom_features wacom_features_0xB8 =
 	{ "Wacom Intuos4 4x6", 31496, 19685, 2047, 63,
-	  INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
 static const struct wacom_features wacom_features_0xB9 =
 	{ "Wacom Intuos4 6x9", 44704, 27940, 2047, 63,
-	  INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0xBA =
 	{ "Wacom Intuos4 8x13", 65024, 40640, 2047, 63,
-	  INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0xBB =
 	{ "Wacom Intuos4 12x19", 97536, 60960, 2047, 63,
-	  INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0xBC =
 	{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
-	  INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0xBD =
 	{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
-	  INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0x26 =
 	{ "Wacom Intuos5 touch S", 31496, 19685, 2047, 63,
-	  INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 };
+	  INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16 };
 static const struct wacom_features wacom_features_0x27 =
 	{ "Wacom Intuos5 touch M", 44704, 27940, 2047, 63,
-	  INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 };
+	  INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
 static const struct wacom_features wacom_features_0x28 =
 	{ "Wacom Intuos5 touch L", 65024, 40640, 2047, 63,
-	  INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 };
+	  INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
 static const struct wacom_features wacom_features_0x29 =
 	{ "Wacom Intuos5 S", 31496, 19685, 2047, 63,
-	  INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
 static const struct wacom_features wacom_features_0x2A =
 	{ "Wacom Intuos5 M", 44704, 27940, 2047, 63,
-	  INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
 static const struct wacom_features wacom_features_0x314 =
 	{ "Wacom Intuos Pro S", 31496, 19685, 2047, 63,
-	  INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16,
+	  INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16,
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0x315 =
 	{ "Wacom Intuos Pro M", 44704, 27940, 2047, 63,
-	  INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16,
+	  INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0x317 =
 	{ "Wacom Intuos Pro L", 65024, 40640, 2047, 63,
-	  INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16,
+	  INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0xF4 =
 	{ "Wacom Cintiq 24HD", 104080, 65200, 2047, 63,
-	  WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0xF8 =
 	{ "Wacom Cintiq 24HD touch", 104080, 65200, 2047, 63, /* Pen */
-	  WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
 static const struct wacom_features wacom_features_0xF6 =
@@ -2928,11 +3079,11 @@ static const struct wacom_features wacom_features_0xF6 =
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0x32A =
 	{ "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63,
-	  WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0x32B =
 	{ "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63,
-	  WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32C };
 static const struct wacom_features wacom_features_0x32C =
@@ -2940,20 +3091,20 @@ static const struct wacom_features wacom_features_0x32C =
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32B, .touch_max = 10 };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX", 87200, 65600, 1023, 63,
-	  CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
 static const struct wacom_features wacom_features_0xC5 =
 	{ "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63,
-	  WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
 static const struct wacom_features wacom_features_0xC6 =
 	{ "Wacom Cintiq 12WX", 53020, 33440, 1023, 63,
-	  WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	  WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
 static const struct wacom_features wacom_features_0x304 =
 	{ "Wacom Cintiq 13HD", 59152, 33448, 1023, 63,
-	  WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0x333 =
 	{ "Wacom Cintiq 13HD touch", 59152, 33448, 2047, 63,
-	  WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x335 };
 static const struct wacom_features wacom_features_0x335 =
@@ -2972,22 +3123,22 @@ static const struct wacom_features wacom_features_0xF0 =
 	  DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0xFB =
 	{ "Wacom DTU1031", 21896, 13760, 511, 0,
-	  DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
 	  WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
 static const struct wacom_features wacom_features_0x32F =
 	{ "Wacom DTU1031X", 22472, 12728, 511, 0,
-	  DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 0,
 	  WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
 static const struct wacom_features wacom_features_0x336 =
 	{ "Wacom DTU1141", 23472, 13203, 1023, 0,
-	  DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 };
 static const struct wacom_features wacom_features_0x57 =
 	{ "Wacom DTK2241", 95640, 54060, 2047, 63,
-	  DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0x59 = /* Pen */
 	{ "Wacom DTH2242", 95640, 54060, 2047, 63,
-	  DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
 static const struct wacom_features wacom_features_0x5D = /* Touch */
@@ -2996,15 +3147,15 @@ static const struct wacom_features wacom_features_0x5D = /* Touch */
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0xCC =
 	{ "Wacom Cintiq 21UX2", 86800, 65200, 2047, 63,
-	  WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0xFA =
 	{ "Wacom Cintiq 22HD", 95440, 53860, 2047, 63,
-	  WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
 static const struct wacom_features wacom_features_0x5B =
 	{ "Wacom Cintiq 22HDT", 95440, 53860, 2047, 63,
-	  WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
 static const struct wacom_features wacom_features_0x5E =
@@ -3151,7 +3302,7 @@ static const struct wacom_features wacom_features_0x6004 =
 	  TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x307 =
 	{ "Wacom ISDv5 307", 59152, 33448, 2047, 63,
-	  CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
 static const struct wacom_features wacom_features_0x309 =
@@ -3160,7 +3311,7 @@ static const struct wacom_features wacom_features_0x309 =
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
 static const struct wacom_features wacom_features_0x30A =
 	{ "Wacom ISDv5 30A", 59152, 33448, 2047, 63,
-	  CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+	  CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
 	  WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
 	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C };
 static const struct wacom_features wacom_features_0x30C =
@@ -3177,6 +3328,10 @@ static const struct wacom_features wacom_features_0x323 =
 	{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
 	  INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
 	  .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
+static const struct wacom_features wacom_features_0x331 =
+	{ "Wacom Express Key Remote", 0, 0, 0, 0,
+	  REMOTE, 0, 0, 18, .check_for_hid_type = true,
+	  .hid_type = HID_TYPE_USBNONE };
 
 static const struct wacom_features wacom_features_HID_ANY_ID =
 	{ "Wacom HID", .type = HID_GENERIC };
@@ -3332,6 +3487,7 @@ const struct hid_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x32B) },
 	{ USB_DEVICE_WACOM(0x32C) },
 	{ USB_DEVICE_WACOM(0x32F) },
+	{ USB_DEVICE_WACOM(0x331) },
 	{ USB_DEVICE_WACOM(0x333) },
 	{ USB_DEVICE_WACOM(0x335) },
 	{ USB_DEVICE_WACOM(0x336) },

drivers/hid/wacom_wac.h

@@ -16,6 +16,8 @@
 #define WACOM_PKGLEN_MAX	192
 
 #define WACOM_NAME_MAX		64
+#define WACOM_MAX_REMOTES	5
+#define WACOM_STATUS_UNKNOWN	255
 
 /* packet length for individual models */
 #define WACOM_PKGLEN_BBFUN	 9
@@ -65,11 +67,11 @@
 #define WACOM_REPORT_USB		192
 #define WACOM_REPORT_BPAD_PEN		3
 #define WACOM_REPORT_BPAD_TOUCH		16
+#define WACOM_REPORT_DEVICE_LIST	16
+#define WACOM_REPORT_REMOTE		17
 
 /* device quirks */
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0001
-#define WACOM_QUIRK_NO_INPUT		0x0002
-#define WACOM_QUIRK_MONITOR		0x0004
 #define WACOM_QUIRK_BATTERY		0x0008
 
 /* device types */
@@ -77,6 +79,7 @@
 #define WACOM_DEVICETYPE_PEN            0x0001
 #define WACOM_DEVICETYPE_TOUCH          0x0002
 #define WACOM_DEVICETYPE_PAD            0x0004
+#define WACOM_DEVICETYPE_WL_MONITOR     0x0008
 
 #define WACOM_VENDORDEFINED_PEN		0xff0d0001
 
@@ -130,6 +133,7 @@ enum {
 	WACOM_24HDT,
 	WACOM_27QHDT,
 	BAMBOO_PAD,
+	REMOTE,
 	TABLETPC,   /* add new TPC below */
 	TABLETPCE,
 	TABLETPC2FG,
@@ -149,6 +153,7 @@ struct wacom_features {
 	int type;
 	int x_resolution;
 	int y_resolution;
+	int numbered_buttons;
 	int x_min;
 	int y_min;
 	int device_type;
@@ -193,6 +198,10 @@ struct hid_data {
 	int width;
 	int height;
 	int id;
+	int cc_index;
+	int cc_value_index;
+	int num_expected;
+	int num_received;
 };
 
 struct wacom_wac {
@@ -204,7 +213,7 @@ struct wacom_wac {
 	unsigned char data[WACOM_PKGLEN_MAX];
 	int tool[2];
 	int id[2];
-	__u32 serial[2];
+	__u32 serial[5];
 	bool reporting_data;
 	struct wacom_features features;
 	struct wacom_shared *shared;