Commit 90848a25 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Mark Brown

ASoC: qcom: q6dsp: add support to more display ports

Existing code base only supports one display port, this patch adds
support upto 8 display ports. This support is required to allow platforms
like X13s which have 3 display ports, and some of the Qualcomm SoCs
there are upto 7 Display ports.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org
Link: https://lore.kernel.org/r/20230509112202.21471-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
parent a8ab6541
......@@ -131,6 +131,14 @@
#define RX_CODEC_DMA_RX_7 126
#define QUINARY_MI2S_RX 127
#define QUINARY_MI2S_TX 128
#define DISPLAY_PORT_RX_0 DISPLAY_PORT_RX
#define DISPLAY_PORT_RX_1 129
#define DISPLAY_PORT_RX_2 130
#define DISPLAY_PORT_RX_3 131
#define DISPLAY_PORT_RX_4 132
#define DISPLAY_PORT_RX_5 133
#define DISPLAY_PORT_RX_6 134
#define DISPLAY_PORT_RX_7 135
#define LPASS_CLK_ID_PRI_MI2S_IBIT 1
#define LPASS_CLK_ID_PRI_MI2S_EBIT 2
......
......@@ -79,6 +79,22 @@
.id = did, \
}
#define Q6AFE_DP_RX_DAI(did) { \
.playback = { \
.stream_name = #did" Playback", \
.rates = SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_96000 | \
SNDRV_PCM_RATE_192000, \
.formats = SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S24_LE, \
.channels_min = 2, \
.channels_max = 8, \
.rate_min = 48000, \
.rate_max = 192000, \
}, \
.name = #did, \
.id = did, \
}
static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
{
......@@ -528,22 +544,14 @@ static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
Q6AFE_TDM_CAP_DAI("Quinary", 5, QUINARY_TDM_TX_5),
Q6AFE_TDM_CAP_DAI("Quinary", 6, QUINARY_TDM_TX_6),
Q6AFE_TDM_CAP_DAI("Quinary", 7, QUINARY_TDM_TX_7),
{
.playback = {
.stream_name = "Display Port Playback",
.rates = SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_96000 |
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
.channels_min = 2,
.channels_max = 8,
.rate_max = 192000,
.rate_min = 48000,
},
.id = DISPLAY_PORT_RX,
.name = "DISPLAY_PORT",
},
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_0),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_1),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_2),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_3),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_4),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_5),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_6),
Q6AFE_DP_RX_DAI(DISPLAY_PORT_RX_7),
Q6AFE_CDC_DMA_RX_DAI(WSA_CODEC_DMA_RX_0),
Q6AFE_CDC_DMA_TX_DAI(WSA_CODEC_DMA_TX_0),
Q6AFE_CDC_DMA_RX_DAI(WSA_CODEC_DMA_RX_1),
......@@ -603,6 +611,9 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
case DISPLAY_PORT_RX:
q6dsp_audio_fe_dais[i].ops = cfg->q6hdmi_ops;
break;
case DISPLAY_PORT_RX_1 ... DISPLAY_PORT_RX_7:
q6dsp_audio_fe_dais[i].ops = cfg->q6hdmi_ops;
break;
case SLIMBUS_0_RX ... SLIMBUS_6_TX:
q6dsp_audio_fe_dais[i].ops = cfg->q6slim_ops;
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment