Merge branch 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb

* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
  kdb,debug_core: Allow the debug core to receive a panic notification
  MAINTAINERS: update kgdb, kdb, and debug_core info
  debug_core,kdb: Allow the debug core to process a recursive debug entry
  printk,kdb: capture printk() when in kdb shell
  kgdboc,kdb: Allow kdb to work on a non open console port
  kgdb: Add the ability to schedule a breakpoint via a tasklet
  mips,kgdb: kdb low level trap catch and stack trace
  powerpc,kgdb: Introduce low level trap catching
  x86,kgdb: Add low level debug hook
  kgdb: remove post_primary_code references
  kgdb,docs: Update the kgdb docs to include kdb
  kgdboc,keyboard: Keyboard driver for kdb with kgdb
  kgdb: gdb "monitor" -> kdb passthrough
  sparc,sunzilog: Add console polling support for sunzilog serial driver
  sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
  kgdb,8250,pl011: Return immediately from console poll
  kgdb: core changes to support kdb
  kdb: core for kgdb back end (2 of 2)
  kdb: core for kgdb back end (1 of 2)
  kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
  ...

Documentation/kernel-parameters.txt

@@ -58,6 +58,7 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
+	KGDB	Kernel debugger support is enabled.
 	KVM	Kernel Virtual Machine support is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
@@ -1120,10 +1121,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	kgdboc=		[HW] kgdb over consoles.
-			Requires a tty driver that supports console polling.
-			(only serial supported for now)
-			Format: <serial_device>[,baud]
+	kgdboc=		[KGDB,HW] kgdb over consoles.
+			Requires a tty driver that supports console polling,
+			or a supported polling keyboard driver (non-usb).
+			Serial only format: <serial_device>[,baud]
+			keyboard only format: kbd
+			keyboard and serial format: kbd,<serial_device>[,baud]
+
+	kgdbwait	[KGDB] Stop kernel execution and enter the
+			kernel debugger at the earliest opportunity.
 
 	kmac=		[MIPS] korina ethernet MAC address.
 			Configure the RouterBoard 532 series on-chip

MAINTAINERS

@@ -3319,15 +3319,17 @@ F:	include/linux/key-type.h
 F:	include/keys/
 F:	security/keys/
 
-KGDB
+KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
+W:	http://kgdb.wiki.kernel.org/
 L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
 F:	drivers/misc/kgdbts.c
 F:	drivers/serial/kgdboc.c
+F:	include/linux/kdb.h
 F:	include/linux/kgdb.h
-F:	kernel/kgdb.c
+F:	kernel/debug/
 
 KMEMCHECK
 M:	Vegard Nossum <vegardno@ifi.uio.no>

arch/arm/include/asm/kmap_types.h

@@ -20,6 +20,7 @@ enum km_type {
 	KM_SOFTIRQ1,
 	KM_L1_CACHE,
 	KM_L2_CACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 

arch/arm/kernel/kgdb.c

@@ -98,6 +98,11 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
 	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->ARM_pc = pc;
+}
+
 static int compiled_break;
 
 int kgdb_arch_handle_exception(int exception_vector, int signo,

arch/blackfin/kernel/kgdb.c

@@ -439,6 +439,11 @@ int kgdb_validate_break_address(unsigned long addr)
 	return -EFAULT;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->retx = ip;
+}
+
 int kgdb_arch_init(void)
 {
 	kgdb_single_step = 0;

arch/mips/include/asm/kgdb.h

@@ -38,6 +38,8 @@ extern int kgdb_early_setup;
 extern void *saved_vectors[32];
 extern void handle_exception(struct pt_regs *regs);
 extern void breakinst(void);
+extern int kgdb_ll_trap(int cmd, const char *str,
+			struct pt_regs *regs, long err, int trap, int sig);
 
 #endif				/* __KERNEL__ */
 

arch/mips/kernel/kgdb.c

@@ -180,6 +180,11 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	*(ptr++) = regs->cp0_epc;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->cp0_epc = pc;
+}
+
 /*
  * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
  * then try to fall into the debugger
@@ -198,7 +203,7 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	if (atomic_read(&kgdb_active) != -1)
 		kgdb_nmicallback(smp_processor_id(), regs);
 
-	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+	if (kgdb_handle_exception(trap, compute_signal(trap), cmd, regs))
 		return NOTIFY_DONE;
 
 	if (atomic_read(&kgdb_setting_breakpoint))
@@ -212,6 +217,26 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	return NOTIFY_STOP;
 }
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr	= trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return kgdb_mips_notify(NULL, cmd, &args);
+}
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 static struct notifier_block kgdb_notifier = {
 	.notifier_call = kgdb_mips_notify,
 };

arch/mips/kernel/traps.c

@@ -26,6 +26,7 @@
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
 #include <linux/notifier.h>
+#include <linux/kdb.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -185,6 +186,11 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 			regs.regs[29] = task->thread.reg29;
 			regs.regs[31] = 0;
 			regs.cp0_epc = task->thread.reg31;
+#ifdef CONFIG_KGDB_KDB
+		} else if (atomic_read(&kgdb_active) != -1 &&
+			   kdb_current_regs) {
+			memcpy(&regs, kdb_current_regs, sizeof(regs));
+#endif /* CONFIG_KGDB_KDB */
 		} else {
 			prepare_frametrace(&regs);
 		}
@@ -360,6 +366,8 @@ void __noreturn die(const char * str, struct pt_regs * regs)
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
+	notify_die(DIE_OOPS, str, (struct pt_regs *)regs, SIGSEGV, 0, 0);
+
 	console_verbose();
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
@@ -704,6 +712,11 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
 		return;
 

arch/powerpc/include/asm/kmap_types.h

@@ -26,6 +26,7 @@ enum km_type {
 	KM_SOFTIRQ1,
 	KM_PPC_SYNC_PAGE,
 	KM_PPC_SYNC_ICACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 

arch/powerpc/kernel/kgdb.c

@@ -20,6 +20,7 @@
 #include <linux/smp.h>
 #include <linux/signal.h>
 #include <linux/ptrace.h>
+#include <linux/kdebug.h>
 #include <asm/current.h>
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -115,7 +116,8 @@ void kgdb_roundup_cpus(unsigned long flags)
 /* KGDB functions to use existing PowerPC64 hooks. */
 static int kgdb_debugger(struct pt_regs *regs)
 {
-	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+	return !kgdb_handle_exception(1, computeSignal(TRAP(regs)),
+				      DIE_OOPS, regs);
 }
 
 static int kgdb_handle_breakpoint(struct pt_regs *regs)
@@ -123,7 +125,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	if (user_mode(regs))
 		return 0;
 
-	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+	if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
 		return 0;
 
 	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
@@ -309,6 +311,11 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->nip = pc;
+}
+
 /*
  * This function does PowerPC specific procesing for interfacing to gdb.
  */

arch/powerpc/kernel/traps.c

@@ -815,12 +815,15 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		return;
 	}
 	if (reason & REASON_TRAP) {
+		/* Debugger is first in line to stop recursive faults in
+		 * rcu_lock, notify_die, or atomic_notifier_call_chain */
+		if (debugger_bpt(regs))
+			return;
+
 		/* trap exception */
 		if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP)
 				== NOTIFY_STOP)
 			return;
-		if (debugger_bpt(regs))
-			return;
 
 		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
 		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {

arch/sh/kernel/kgdb.c

@@ -237,6 +237,18 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 	return -1;
 }
 
+unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+	if (exception == 60)
+		return instruction_pointer(regs) - 2;
+	return instruction_pointer(regs);
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+}
+
 /*
  * The primary entry points for the kgdb debug trap table entries.
  */
@@ -247,7 +259,7 @@ BUILD_TRAP_HANDLER(singlestep)
 
 	local_irq_save(flags);
 	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-	kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	local_irq_restore(flags);
 }
 

arch/sparc/kernel/kgdb_32.c

@@ -158,6 +158,12 @@ void kgdb_arch_exit(void)
 {
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+	regs->npc = regs->pc + 4;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: ta 0x7d */
 	.gdb_bpt_instr		= { 0x91, 0xd0, 0x20, 0x7d },

arch/sparc/kernel/kgdb_64.c

@@ -181,6 +181,12 @@ void kgdb_arch_exit(void)
 {
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->tpc = ip;
+	regs->tnpc = regs->tpc + 4;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: ta 0x72 */
 	.gdb_bpt_instr		= { 0x91, 0xd0, 0x20, 0x72 },

arch/x86/include/asm/kgdb.h

@@ -76,4 +76,7 @@ static inline void arch_kgdb_breakpoint(void)
 #define BREAK_INSTR_SIZE	1
 #define CACHE_FLUSH_IS_SAFE	1
 
+extern int kgdb_ll_trap(int cmd, const char *str,
+			struct pt_regs *regs, long err, int trap, int sig);
+
 #endif /* _ASM_X86_KGDB_H */

arch/x86/kernel/kgdb.c

@@ -47,20 +47,8 @@
 #include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
-
 #include <asm/apic.h>
 
-/*
- * Put the error code here just in case the user cares:
- */
-static int gdb_x86errcode;
-
-/*
- * Likewise, the vector number here (since GDB only gets the signal
- * number through the usual means, and that's not very specific):
- */
-static int gdb_x86vector = -1;
-
 /**
  *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
  *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
@@ -399,23 +387,6 @@ void kgdb_disable_hw_debug(struct pt_regs *regs)
 	}
 }
 
-/**
- *	kgdb_post_primary_code - Save error vector/code numbers.
- *	@regs: Original pt_regs.
- *	@e_vector: Original error vector.
- *	@err_code: Original error code.
- *
- *	This is needed on architectures which support SMP and KGDB.
- *	This function is called after all the slave cpus have been put
- *	to a know spin state and the primary CPU has control over KGDB.
- */
-void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
-{
-	/* primary processor is completely in the debugger */
-	gdb_x86vector = e_vector;
-	gdb_x86errcode = err_code;
-}
-
 #ifdef CONFIG_SMP
 /**
  *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
@@ -567,7 +538,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 			return NOTIFY_DONE;
 	}
 
-	if (kgdb_handle_exception(args->trapnr, args->signr, args->err, regs))
+	if (kgdb_handle_exception(args->trapnr, args->signr, cmd, regs))
 		return NOTIFY_DONE;
 
 	/* Must touch watchdog before return to normal operation */
@@ -575,6 +546,26 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 	return NOTIFY_STOP;
 }
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr	= trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return __kgdb_notify(&args, cmd);
+}
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 static int
 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
 {
@@ -690,6 +681,11 @@ unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
 	return instruction_pointer(regs);
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->ip = ip;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: */
 	.gdb_bpt_instr		= { 0xcc },

arch/x86/kernel/traps.c

@@ -15,6 +15,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
+#include <linux/kgdb.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
@@ -451,6 +452,11 @@ void restart_nmi(void)
 /* May run on IST stack. */
 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
 {
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 #ifdef CONFIG_KPROBES
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
 			== NOTIFY_STOP)

drivers/serial/8250.c

@@ -1891,8 +1891,8 @@ static int serial8250_get_poll_char(struct uart_port *port)
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	unsigned char lsr = serial_inp(up, UART_LSR);
 
-	while (!(lsr & UART_LSR_DR))
-		lsr = serial_inp(up, UART_LSR);
+	if (!(lsr & UART_LSR_DR))
+		return NO_POLL_CHAR;
 
 	return serial_inp(up, UART_RX);
 }

drivers/serial/amba-pl011.c

@@ -342,9 +342,9 @@ static int pl010_get_poll_char(struct uart_port *port)
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int status;
 
-	do {
 	status = readw(uap->port.membase + UART01x_FR);
-	} while (status & UART01x_FR_RXFE);
+	if (status & UART01x_FR_RXFE)
+		return NO_POLL_CHAR;
 
 	return readw(uap->port.membase + UART01x_DR);
 }

drivers/serial/kgdboc.c

@@ -14,7 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/kgdb.h>
+#include <linux/kdb.h>
 #include <linux/tty.h>
+#include <linux/console.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -32,6 +34,40 @@ static struct kparam_string kps = {
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
+#ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_register_kbd(char **cptr)
+{
+	if (strncmp(*cptr, "kbd", 3) == 0) {
+		if (kdb_poll_idx < KDB_POLL_FUNC_MAX) {
+			kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char;
+			kdb_poll_idx++;
+			if (cptr[0][3] == ',')
+				*cptr += 4;
+			else
+				return 1;
+		}
+	}
+	return 0;
+}
+
+static void kgdboc_unregister_kbd(void)
+{
+	int i;
+
+	for (i = 0; i < kdb_poll_idx; i++) {
+		if (kdb_poll_funcs[i] == kdb_get_kbd_char) {
+			kdb_poll_idx--;
+			kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx];
+			kdb_poll_funcs[kdb_poll_idx] = NULL;
+			i--;
+		}
+	}
+}
+#else /* ! CONFIG_KDB_KEYBOARD */
+#define kgdboc_register_kbd(x) 0
+#define kgdboc_unregister_kbd()
+#endif /* ! CONFIG_KDB_KEYBOARD */
+
 static int kgdboc_option_setup(char *opt)
 {
 	if (strlen(opt) > MAX_CONFIG_LEN) {
@@ -45,25 +81,51 @@ static int kgdboc_option_setup(char *opt)
 
 __setup("kgdboc=", kgdboc_option_setup);
 
+static void cleanup_kgdboc(void)
+{
+	kgdboc_unregister_kbd();
+	if (configured == 1)
+		kgdb_unregister_io_module(&kgdboc_io_ops);
+}
+
 static int configure_kgdboc(void)
 {
 	struct tty_driver *p;
 	int tty_line = 0;
 	int err;
+	char *cptr = config;
+	struct console *cons;
 
 	err = kgdboc_option_setup(config);
 	if (err || !strlen(config) || isspace(config[0]))
 		goto noconfig;
 
 	err = -ENODEV;
+	kgdboc_io_ops.is_console = 0;
+	kgdb_tty_driver = NULL;
+
+	if (kgdboc_register_kbd(&cptr))
+		goto do_register;
 
-	p = tty_find_polling_driver(config, &tty_line);
+	p = tty_find_polling_driver(cptr, &tty_line);
 	if (!p)
 		goto noconfig;
 
+	cons = console_drivers;
+	while (cons) {
+		int idx;
+		if (cons->device && cons->device(cons, &idx) == p &&
+		    idx == tty_line) {
+			kgdboc_io_ops.is_console = 1;
+			break;
+		}
+		cons = cons->next;
+	}
+
 	kgdb_tty_driver = p;
 	kgdb_tty_line = tty_line;
 
+do_register:
 	err = kgdb_register_io_module(&kgdboc_io_ops);
 	if (err)
 		goto noconfig;
@@ -75,6 +137,7 @@ static int configure_kgdboc(void)
 noconfig:
 	config[0] = 0;
 	configured = 0;
+	cleanup_kgdboc();
 
 	return err;
 }
@@ -88,20 +151,18 @@ static int __init init_kgdboc(void)
 	return configure_kgdboc();
 }
 
-static void cleanup_kgdboc(void)
-{
-	if (configured == 1)
-		kgdb_unregister_io_module(&kgdboc_io_ops);
-}
-
 static int kgdboc_get_char(void)
 {
+	if (!kgdb_tty_driver)
+		return -1;
 	return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver,
 						kgdb_tty_line);
 }
 
 static void kgdboc_put_char(u8 chr)
 {
+	if (!kgdb_tty_driver)
+		return;
 	kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver,
 					kgdb_tty_line, chr);
 }

drivers/serial/sh-sci.c

@@ -151,7 +151,11 @@ static int sci_poll_get_char(struct uart_port *port)
 			handle_error(port);
 			continue;
 		}
-	} while (!(status & SCxSR_RDxF(port)));
+		break;
+	} while (1);
+
+	if (!(status & SCxSR_RDxF(port)))
+		return NO_POLL_CHAR;
 
 	c = sci_in(port, SCxRDR);
 

drivers/serial/sunzilog.c

@@ -102,6 +102,8 @@ struct uart_sunzilog_port {
 #endif
 };
 
+static void sunzilog_putchar(struct uart_port *port, int ch);
+
 #define ZILOG_CHANNEL_FROM_PORT(PORT)	((struct zilog_channel __iomem *)((PORT)->membase))
 #define UART_ZILOG(PORT)		((struct uart_sunzilog_port *)(PORT))
 
@@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *se
 	return -EINVAL;
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+static int sunzilog_get_poll_char(struct uart_port *port)
+{
+	unsigned char ch, r1;
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+	struct zilog_channel __iomem *channel
+		= ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+
+	r1 = read_zsreg(channel, R1);
+	if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+		writeb(ERR_RES, &channel->control);
+		ZSDELAY();
+		ZS_WSYNC(channel);
+	}
+
+	ch = readb(&channel->control);
+	ZSDELAY();
+
+	/* This funny hack depends upon BRK_ABRT not interfering
+	 * with the other bits we care about in R1.
+	 */
+	if (ch & BRK_ABRT)
+		r1 |= BRK_ABRT;
+
+	if (!(ch & Rx_CH_AV))
+		return NO_POLL_CHAR;
+
+	ch = readb(&channel->data);
+	ZSDELAY();
+
+	ch &= up->parity_mask;
+	return ch;
+}
+
+static void sunzilog_put_poll_char(struct uart_port *port,
+			unsigned char ch)
+{
+	struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port;
+
+	sunzilog_putchar(&up->port, ch);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
 static struct uart_ops sunzilog_pops = {
 	.tx_empty	=	sunzilog_tx_empty,
 	.set_mctrl	=	sunzilog_set_mctrl,
@@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = {
 	.request_port	=	sunzilog_request_port,
 	.config_port	=	sunzilog_config_port,
 	.verify_port	=	sunzilog_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	=	sunzilog_get_poll_char,
+	.poll_put_char	=	sunzilog_put_poll_char,
+#endif
 };
 
 static int uart_chip_count;

include/asm-generic/kmap_types.h

@@ -28,7 +28,8 @@ KMAP_D(15)	KM_UML_USERCOPY,
 KMAP_D(16)	KM_IRQ_PTE,
 KMAP_D(17)	KM_NMI,
 KMAP_D(18)	KM_NMI_PTE,
-KMAP_D(19)	KM_TYPE_NR
+KMAP_D(19)	KM_KDB,
+KMAP_D(20)	KM_TYPE_NR
 };
 
 #undef KMAP_D

include/linux/kdb.h

+#ifndef _KDB_H
+#define _KDB_H
+
+/*
+ * Kernel Debugger Architecture Independent Global Headers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
+ */
+
+#ifdef	CONFIG_KGDB_KDB
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <asm/atomic.h>
+
+#define KDB_POLL_FUNC_MAX	5
+extern int kdb_poll_idx;
+
+/*
+ * kdb_initial_cpu is initialized to -1, and is set to the cpu
+ * number whenever the kernel debugger is entered.
+ */
+extern int kdb_initial_cpu;
+extern atomic_t kdb_event;
+
+/*
+ * kdb_diemsg
+ *
+ *	Contains a pointer to the last string supplied to the
+ *	kernel 'die' panic function.
+ */
+extern const char *kdb_diemsg;
+
+#define KDB_FLAG_EARLYKDB	(1 << 0) /* set from boot parameter kdb=early */
+#define KDB_FLAG_CATASTROPHIC	(1 << 1) /* A catastrophic event has occurred */
+#define KDB_FLAG_CMD_INTERRUPT	(1 << 2) /* Previous command was interrupted */
+#define KDB_FLAG_NOIPI		(1 << 3) /* Do not send IPIs */
+#define KDB_FLAG_ONLY_DO_DUMP	(1 << 4) /* Only do a dump, used when
+					  * kdb is off */
+#define KDB_FLAG_NO_CONSOLE	(1 << 5) /* No console is available,
+					  * kdb is disabled */
+#define KDB_FLAG_NO_VT_CONSOLE	(1 << 6) /* No VT console is available, do
+					  * not use keyboard */
+#define KDB_FLAG_NO_I8042	(1 << 7) /* No i8042 chip is available, do
+					  * not use keyboard */
+
+extern int kdb_flags;	/* Global flags, see kdb_state for per cpu state */
+
+extern void kdb_save_flags(void);
+extern void kdb_restore_flags(void);
+
+#define KDB_FLAG(flag)		(kdb_flags & KDB_FLAG_##flag)
+#define KDB_FLAG_SET(flag)	((void)(kdb_flags |= KDB_FLAG_##flag))
+#define KDB_FLAG_CLEAR(flag)	((void)(kdb_flags &= ~KDB_FLAG_##flag))
+
+/*
+ * External entry point for the kernel debugger.  The pt_regs
+ * at the time of entry are supplied along with the reason for
+ * entry to the kernel debugger.
+ */
+
+typedef enum {
+	KDB_REASON_ENTER = 1,	/* KDB_ENTER() trap/fault - regs valid */
+	KDB_REASON_ENTER_SLAVE,	/* KDB_ENTER_SLAVE() trap/fault - regs valid */
+	KDB_REASON_BREAK,	/* Breakpoint inst. - regs valid */
+	KDB_REASON_DEBUG,	/* Debug Fault - regs valid */
+	KDB_REASON_OOPS,	/* Kernel Oops - regs valid */
+	KDB_REASON_SWITCH,	/* CPU switch - regs valid*/
+	KDB_REASON_KEYBOARD,	/* Keyboard entry - regs valid */
+	KDB_REASON_NMI,		/* Non-maskable interrupt; regs valid */
+	KDB_REASON_RECURSE,	/* Recursive entry to kdb;
+				 * regs probably valid */
+	KDB_REASON_SSTEP,	/* Single Step trap. - regs valid */
+} kdb_reason_t;
+
+extern int kdb_trap_printk;
+extern int vkdb_printf(const char *fmt, va_list args)
+	    __attribute__ ((format (printf, 1, 0)));
+extern int kdb_printf(const char *, ...)
+	    __attribute__ ((format (printf, 1, 2)));
+typedef int (*kdb_printf_t)(const char *, ...)
+	     __attribute__ ((format (printf, 1, 2)));
+
+extern void kdb_init(int level);
+
+/* Access to kdb specific polling devices */
+typedef int (*get_char_func)(void);
+extern get_char_func kdb_poll_funcs[];
+extern int kdb_get_kbd_char(void);
+
+static inline
+int kdb_process_cpu(const struct task_struct *p)
+{
+	unsigned int cpu = task_thread_info(p)->cpu;
+	if (cpu > num_possible_cpus())
+		cpu = 0;
+	return cpu;
+}
+
+/* kdb access to register set for stack dumping */
+extern struct pt_regs *kdb_current_regs;
+
+#else /* ! CONFIG_KGDB_KDB */
+#define kdb_printf(...)
+#define kdb_init(x)
+#endif	/* CONFIG_KGDB_KDB */
+enum {
+	KDB_NOT_INITIALIZED,
+	KDB_INIT_EARLY,
+	KDB_INIT_FULL,
+};
+#endif	/* !_KDB_H */

include/linux/kgdb.h

@@ -16,10 +16,12 @@
 #include <linux/serial_8250.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
-
 #include <asm/atomic.h>
+#ifdef CONFIG_HAVE_ARCH_KGDB
 #include <asm/kgdb.h>
+#endif
 
+#ifdef CONFIG_KGDB
 struct pt_regs;
 
 /**
@@ -33,20 +35,6 @@ struct pt_regs;
  */
 extern int kgdb_skipexception(int exception, struct pt_regs *regs);
 
-/**
- *	kgdb_post_primary_code - (optional) Save error vector/code numbers.
- *	@regs: Original pt_regs.
- *	@e_vector: Original error vector.
- *	@err_code: Original error code.
- *
- *	This is usually needed on architectures which support SMP and
- *	KGDB.  This function is called after all the secondary cpus have
- *	been put to a know spin state and the primary CPU has control over
- *	KGDB.
- */
-extern void kgdb_post_primary_code(struct pt_regs *regs, int e_vector,
-				  int err_code);
-
 /**
  *	kgdb_disable_hw_debug - (optional) Disable hardware debugging hook
  *	@regs: Current &struct pt_regs.
@@ -72,6 +60,7 @@ struct uart_port;
 void kgdb_breakpoint(void);
 
 extern int kgdb_connected;
+extern int kgdb_io_module_registered;
 
 extern atomic_t			kgdb_setting_breakpoint;
 extern atomic_t			kgdb_cpu_doing_single_step;
@@ -202,6 +191,17 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code,
  */
 extern void kgdb_roundup_cpus(unsigned long flags);
 
+/**
+ *	kgdb_arch_set_pc - Generic call back to the program counter
+ *	@regs: Current &struct pt_regs.
+ *  @pc: The new value for the program counter
+ *
+ *	This function handles updating the program counter and requires an
+ *	architecture specific implementation.
+ */
+extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc);
+
+
 /* Optional functions. */
 extern int kgdb_validate_break_address(unsigned long addr);
 extern int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr);
@@ -247,6 +247,8 @@ struct kgdb_arch {
  * the I/O driver.
  * @post_exception: Pointer to a function that will do any cleanup work
  * for the I/O driver.
+ * @is_console: 1 if the end device is a console 0 if the I/O device is
+ * not a console
  */
 struct kgdb_io {
 	const char		*name;
@@ -256,6 +258,7 @@ struct kgdb_io {
 	int			(*init) (void);
 	void			(*pre_exception) (void);
 	void			(*post_exception) (void);
+	int			is_console;
 };
 
 extern struct kgdb_arch		arch_kgdb_ops;
@@ -264,12 +267,14 @@ extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
 
 extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
 extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
+extern struct kgdb_io *dbg_io_ops;
 
 extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
 extern int kgdb_mem2hex(char *mem, char *buf, int count);
 extern int kgdb_hex2mem(char *buf, char *mem, int count);
 
 extern int kgdb_isremovedbreak(unsigned long addr);
+extern void kgdb_schedule_breakpoint(void);
 
 extern int
 kgdb_handle_exception(int ex_vector, int signo, int err_code,
@@ -278,5 +283,9 @@ extern int kgdb_nmicallback(int cpu, void *regs);
 
 extern int			kgdb_single_step;
 extern atomic_t			kgdb_active;
-
+#define in_dbg_master() \
+	(raw_smp_processor_id() == atomic_read(&kgdb_active))
+#else /* ! CONFIG_KGDB */
+#define in_dbg_master() (0)
+#endif /* ! CONFIG_KGDB */
 #endif /* _KGDB_H_ */

include/linux/serial_core.h

@@ -250,6 +250,7 @@ struct uart_ops {
 #endif
 };
 
+#define NO_POLL_CHAR		0x00ff0000
 #define UART_CONFIG_TYPE	(1 << 0)
 #define UART_CONFIG_IRQ		(1 << 1)
 

init/main.c

@@ -62,6 +62,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/idr.h>
+#include <linux/kdb.h>
 #include <linux/ftrace.h>
 #include <linux/async.h>
 #include <linux/kmemcheck.h>
@@ -675,6 +676,7 @@ asmlinkage void __init start_kernel(void)
 	buffer_init();
 	key_init();
 	security_init();
+	kdb_init(KDB_INIT_FULL);
 	vfs_caches_init(totalram_pages);
 	signals_init();
 	/* rootfs populating might need page-writeback */

kernel/Makefile

@@ -75,7 +75,7 @@ obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
 obj-$(CONFIG_GCOV_KERNEL) += gcov/
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_KGDB) += debug/
 obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/

kernel/debug/Makefile

+#
+# Makefile for the linux kernel debugger
+#
+
+obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o
+obj-$(CONFIG_KGDB_KDB) += kdb/

kernel/debug/debug_core.h

+/*
+ * Created by: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DEBUG_CORE_H_
+#define _DEBUG_CORE_H_
+/*
+ * These are the private implementation headers between the kernel
+ * debugger core and the debugger front end code.
+ */
+
+/* kernel debug core data structures */
+struct kgdb_state {
+	int			ex_vector;
+	int			signo;
+	int			err_code;
+	int			cpu;
+	int			pass_exception;
+	unsigned long		thr_query;
+	unsigned long		threadid;
+	long			kgdb_usethreadid;
+	struct pt_regs		*linux_regs;
+};
+
+/* Exception state values */
+#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
+#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
+#define DCPU_IS_SLAVE    0x4 /* Slave cpu enter exception */
+#define DCPU_SSTEP       0x8 /* CPU is single stepping */
+
+struct debuggerinfo_struct {
+	void			*debuggerinfo;
+	struct task_struct	*task;
+	int			exception_state;
+	int			ret_state;
+	int			irq_depth;
+};
+
+extern struct debuggerinfo_struct kgdb_info[];
+
+/* kernel debug core break point routines */
+extern int dbg_remove_all_break(void);
+extern int dbg_set_sw_break(unsigned long addr);
+extern int dbg_remove_sw_break(unsigned long addr);
+extern int dbg_activate_sw_breakpoints(void);
+extern int dbg_deactivate_sw_breakpoints(void);
+
+/* polled character access to i/o module */
+extern int dbg_io_get_char(void);
+
+/* stub return value for switching between the gdbstub and kdb */
+#define DBG_PASS_EVENT -12345
+/* Switch from one cpu to another */
+#define DBG_SWITCH_CPU_EVENT -123456
+extern int dbg_switch_cpu;
+
+/* gdbstub interface functions */
+extern int gdb_serial_stub(struct kgdb_state *ks);
+extern void gdbstub_msg_write(const char *s, int len);
+
+/* gdbstub functions used for kdb <-> gdbstub transition */
+extern int gdbstub_state(struct kgdb_state *ks, char *cmd);
+extern int dbg_kdb_mode;
+
+#ifdef CONFIG_KGDB_KDB
+extern int kdb_stub(struct kgdb_state *ks);
+extern int kdb_parse(const char *cmdstr);
+#else /* ! CONFIG_KGDB_KDB */
+static inline int kdb_stub(struct kgdb_state *ks)
+{
+	return DBG_PASS_EVENT;
+}
+#endif /* CONFIG_KGDB_KDB */
+
+#endif /* _DEBUG_CORE_H_ */

kernel/debug/kdb/.gitignore

+gen-kdb_cmds.c

kernel/debug/kdb/Makefile

+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+# Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved.
+#
+
+CCVERSION	:= $(shell $(CC) -v 2>&1 | sed -ne '$$p')
+obj-y := kdb_io.o kdb_main.o kdb_support.o kdb_bt.o gen-kdb_cmds.o kdb_bp.o kdb_debugger.o
+obj-$(CONFIG_KDB_KEYBOARD)    += kdb_keyboard.o
+
+clean-files := gen-kdb_cmds.c
+
+quiet_cmd_gen-kdb = GENKDB  $@
+      cmd_gen-kdb = $(AWK) 'BEGIN {print "\#include <linux/stddef.h>"; print "\#include <linux/init.h>"} \
+		/^\#/{next} \
+		/^[ \t]*$$/{next} \
+		{gsub(/"/, "\\\"", $$0); \
+		  print "static __initdata char kdb_cmd" cmds++ "[] = \"" $$0 "\\n\";"} \
+		END {print "extern char *kdb_cmds[]; char __initdata *kdb_cmds[] = {"; for (i = 0; i < cmds; ++i) {print "  kdb_cmd" i ","}; print("  NULL\n};");}' \
+		$(filter-out %/Makefile,$^) > $@#
+
+$(obj)/gen-kdb_cmds.c:	$(src)/kdb_cmds $(src)/Makefile
+	$(call cmd,gen-kdb)

kernel/debug/kdb/kdb_bt.c

+/*
+ * Kernel Debugger Architecture Independent Stack Traceback
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1999-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2009 Wind River Systems, Inc.  All Rights Reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kdb.h>
+#include <linux/nmi.h>
+#include <asm/system.h>
+#include "kdb_private.h"
+
+
+static void kdb_show_stack(struct task_struct *p, void *addr)
+{
+	int old_lvl = console_loglevel;
+	console_loglevel = 15;
+	kdb_trap_printk++;
+	kdb_set_current_task(p);
+	if (addr) {
+		show_stack((struct task_struct *)p, addr);
+	} else if (kdb_current_regs) {
+#ifdef CONFIG_X86
+		show_stack(p, &kdb_current_regs->sp);
+#else
+		show_stack(p, NULL);
+#endif
+	} else {
+		show_stack(p, NULL);
+	}
+	console_loglevel = old_lvl;
+	kdb_trap_printk--;
+}
+
+/*
+ * kdb_bt
+ *
+ *	This function implements the 'bt' command.  Print a stack
+ *	traceback.
+ *
+ *	bt [<address-expression>]	(addr-exp is for alternate stacks)
+ *	btp <pid>			Kernel stack for <pid>
+ *	btt <address-expression>	Kernel stack for task structure at
+ *					<address-expression>
+ *	bta [DRSTCZEUIMA]		All useful processes, optionally
+ *					filtered by state
+ *	btc [<cpu>]			The current process on one cpu,
+ *					default is all cpus
+ *
+ *	bt <address-expression> refers to a address on the stack, that location
+ *	is assumed to contain a return address.
+ *
+ *	btt <address-expression> refers to the address of a struct task.
+ *
+ * Inputs:
+ *	argc	argument count
+ *	argv	argument vector
+ * Outputs:
+ *	None.
+ * Returns:
+ *	zero for success, a kdb diagnostic if error
+ * Locking:
+ *	none.
+ * Remarks:
+ *	Backtrack works best when the code uses frame pointers.  But even
+ *	without frame pointers we should get a reasonable trace.
+ *
+ *	mds comes in handy when examining the stack to do a manual traceback or
+ *	to get a starting point for bt <address-expression>.
+ */
+
+static int
+kdb_bt1(struct task_struct *p, unsigned long mask,
+	int argcount, int btaprompt)
+{
+	char buffer[2];
+	if (kdb_getarea(buffer[0], (unsigned long)p) ||
+	    kdb_getarea(buffer[0], (unsigned long)(p+1)-1))
+		return KDB_BADADDR;
+	if (!kdb_task_state(p, mask))
+		return 0;
+	kdb_printf("Stack traceback for pid %d\n", p->pid);
+	kdb_ps1(p);
+	kdb_show_stack(p, NULL);
+	if (btaprompt) {
+		kdb_getstr(buffer, sizeof(buffer),
+			   "Enter <q> to end, <cr> to continue:");
+		if (buffer[0] == 'q') {
+			kdb_printf("\n");
+			return 1;
+		}
+	}
+	touch_nmi_watchdog();
+	return 0;
+}
+
+int
+kdb_bt(int argc, const char **argv)
+{
+	int diag;
+	int argcount = 5;
+	int btaprompt = 1;
+	int nextarg;
+	unsigned long addr;
+	long offset;
+
+	kdbgetintenv("BTARGS", &argcount);	/* Arguments to print */
+	kdbgetintenv("BTAPROMPT", &btaprompt);	/* Prompt after each
+						 * proc in bta */
+
+	if (strcmp(argv[0], "bta") == 0) {
+		struct task_struct *g, *p;
+		unsigned long cpu;
+		unsigned long mask = kdb_task_state_string(argc ? argv[1] :
+							   NULL);
+		if (argc == 0)
+			kdb_ps_suppressed();
+		/* Run the active tasks first */
+		for_each_online_cpu(cpu) {
+			p = kdb_curr_task(cpu);
+			if (kdb_bt1(p, mask, argcount, btaprompt))
+				return 0;
+		}
+		/* Now the inactive tasks */
+		kdb_do_each_thread(g, p) {
+			if (task_curr(p))
+				continue;
+			if (kdb_bt1(p, mask, argcount, btaprompt))
+				return 0;
+		} kdb_while_each_thread(g, p);
+	} else if (strcmp(argv[0], "btp") == 0) {
+		struct task_struct *p;
+		unsigned long pid;
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &pid);
+		if (diag)
+			return diag;
+		p = find_task_by_pid_ns(pid, &init_pid_ns);
+		if (p) {
+			kdb_set_current_task(p);
+			return kdb_bt1(p, ~0UL, argcount, 0);
+		}
+		kdb_printf("No process with pid == %ld found\n", pid);
+		return 0;
+	} else if (strcmp(argv[0], "btt") == 0) {
+		if (argc != 1)
+			return KDB_ARGCOUNT;
+		diag = kdbgetularg((char *)argv[1], &addr);
+		if (diag)
+			return diag;
+		kdb_set_current_task((struct task_struct *)addr);
+		return kdb_bt1((struct task_struct *)addr, ~0UL, argcount, 0);
+	} else if (strcmp(argv[0], "btc") == 0) {
+		unsigned long cpu = ~0;
+		struct task_struct *save_current_task = kdb_current_task;
+		char buf[80];
+		if (argc > 1)
+			return KDB_ARGCOUNT;
+		if (argc == 1) {
+			diag = kdbgetularg((char *)argv[1], &cpu);
+			if (diag)
+				return diag;
+		}
+		/* Recursive use of kdb_parse, do not use argv after
+		 * this point */
+		argv = NULL;
+		if (cpu != ~0) {
+			if (cpu >= num_possible_cpus() || !cpu_online(cpu)) {
+				kdb_printf("no process for cpu %ld\n", cpu);
+				return 0;
+			}
+			sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+			kdb_parse(buf);
+			return 0;
+		}
+		kdb_printf("btc: cpu status: ");
+		kdb_parse("cpu\n");
+		for_each_online_cpu(cpu) {
+			sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu));
+			kdb_parse(buf);
+			touch_nmi_watchdog();
+		}
+		kdb_set_current_task(save_current_task);
+		return 0;
+	} else {
+		if (argc) {
+			nextarg = 1;
+			diag = kdbgetaddrarg(argc, argv, &nextarg, &addr,
+					     &offset, NULL);
+			if (diag)
+				return diag;
+			kdb_show_stack(kdb_current_task, (void *)addr);
+			return 0;
+		} else {
+			return kdb_bt1(kdb_current_task, ~0UL, argcount, 0);
+		}
+	}
+
+	/* NOTREACHED */
+	return 0;
+}

kernel/debug/kdb/kdb_cmds

+# Initial commands for kdb, alter to suit your needs.
+# These commands are executed in kdb_init() context, no SMP, no
+# processes.  Commands that require process data (including stack or
+# registers) are not reliable this early.  set and bp commands should
+# be safe.  Global breakpoint commands affect each cpu as it is booted.
+
+# Standard debugging information for first level support, just type archkdb
+# or archkdbcpu or archkdbshort at the kdb prompt.
+
+defcmd dumpcommon "" "Common kdb debugging"
+  set BTAPROMPT 0
+  set LINES 10000
+  -summary
+  -cpu
+  -ps
+  -dmesg 600
+  -bt
+endefcmd
+
+defcmd dumpall "" "First line debugging"
+  set BTSYMARG 1
+  set BTARGS 9
+  pid R
+  -dumpcommon
+  -bta
+endefcmd
+
+defcmd dumpcpu "" "Same as dumpall but only tasks on cpus"
+  set BTSYMARG 1
+  set BTARGS 9
+  pid R
+  -dumpcommon
+  -btc
+endefcmd
+

kernel/kallsyms.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/fs.h>
+#include <linux/kdb.h>
 #include <linux/err.h>
 #include <linux/proc_fs.h>
 #include <linux/sched.h>	/* for cond_resched */
@@ -516,6 +517,26 @@ static int kallsyms_open(struct inode *inode, struct file *file)
 	return ret;
 }
 
+#ifdef	CONFIG_KGDB_KDB
+const char *kdb_walk_kallsyms(loff_t *pos)
+{
+	static struct kallsym_iter kdb_walk_kallsyms_iter;
+	if (*pos == 0) {
+		memset(&kdb_walk_kallsyms_iter, 0,
+		       sizeof(kdb_walk_kallsyms_iter));
+		reset_iter(&kdb_walk_kallsyms_iter, 0);
+	}
+	while (1) {
+		if (!update_iter(&kdb_walk_kallsyms_iter, *pos))
+			return NULL;
+		++*pos;
+		/* Some debugging symbols have no name.  Ignore them. */
+		if (kdb_walk_kallsyms_iter.name[0])
+			return kdb_walk_kallsyms_iter.name;
+	}
+}
+#endif	/* CONFIG_KGDB_KDB */
+
 static const struct file_operations kallsyms_operations = {
 	.open = kallsyms_open,
 	.read = seq_read,

kernel/module.c

@@ -77,6 +77,10 @@
 DEFINE_MUTEX(module_mutex);
 EXPORT_SYMBOL_GPL(module_mutex);
 static LIST_HEAD(modules);
+#ifdef CONFIG_KGDB_KDB
+struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+#endif /* CONFIG_KGDB_KDB */
+
 
 /* Block module loading/unloading? */
 int modules_disabled = 0;

kernel/printk.c

@@ -33,6 +33,7 @@
 #include <linux/bootmem.h>
 #include <linux/syscalls.h>
 #include <linux/kexec.h>
+#include <linux/kdb.h>
 #include <linux/ratelimit.h>
 #include <linux/kmsg_dump.h>
 #include <linux/syslog.h>
@@ -413,6 +414,22 @@ SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 	return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
 }
 
+#ifdef	CONFIG_KGDB_KDB
+/* kdb dmesg command needs access to the syslog buffer.  do_syslog()
+ * uses locks so it cannot be used during debugging.  Just tell kdb
+ * where the start and end of the physical and logical logs are.  This
+ * is equivalent to do_syslog(3).
+ */
+void kdb_syslog_data(char *syslog_data[4])
+{
+	syslog_data[0] = log_buf;
+	syslog_data[1] = log_buf + log_buf_len;
+	syslog_data[2] = log_buf + log_end -
+		(logged_chars < log_buf_len ? logged_chars : log_buf_len);
+	syslog_data[3] = log_buf + log_end;
+}
+#endif	/* CONFIG_KGDB_KDB */
+
 /*
  * Call the console drivers on a range of log_buf
  */
@@ -586,6 +603,14 @@ asmlinkage int printk(const char *fmt, ...)
 	va_list args;
 	int r;
 
+#ifdef CONFIG_KGDB_KDB
+	if (unlikely(kdb_trap_printk)) {
+		va_start(args, fmt);
+		r = vkdb_printf(fmt, args);
+		va_end(args);
+		return r;
+	}
+#endif
 	va_start(args, fmt);
 	r = vprintk(fmt, args);
 	va_end(args);

kernel/sched.c

@@ -7759,9 +7759,9 @@ void normalize_rt_tasks(void)
 
 #endif /* CONFIG_MAGIC_SYSRQ */
 
-#ifdef CONFIG_IA64
+#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB)
 /*
- * These functions are only useful for the IA64 MCA handling.
+ * These functions are only useful for the IA64 MCA handling, or kdb.
  *
  * They can only be called when the whole system has been
  * stopped - every CPU needs to be quiescent, and no scheduling
@@ -7781,6 +7781,9 @@ struct task_struct *curr_task(int cpu)
 	return cpu_curr(cpu);
 }
 
+#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */
+
+#ifdef CONFIG_IA64
 /**
  * set_curr_task - set the current task for a given cpu.
  * @cpu: the processor in question.

kernel/signal.c

@@ -2735,3 +2735,43 @@ void __init signals_init(void)
 {
 	sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC);
 }
+
+#ifdef CONFIG_KGDB_KDB
+#include <linux/kdb.h>
+/*
+ * kdb_send_sig_info - Allows kdb to send signals without exposing
+ * signal internals.  This function checks if the required locks are
+ * available before calling the main signal code, to avoid kdb
+ * deadlocks.
+ */
+void
+kdb_send_sig_info(struct task_struct *t, struct siginfo *info)
+{
+	static struct task_struct *kdb_prev_t;
+	int sig, new_t;
+	if (!spin_trylock(&t->sighand->siglock)) {
+		kdb_printf("Can't do kill command now.\n"
+			   "The sigmask lock is held somewhere else in "
+			   "kernel, try again later\n");
+		return;
+	}
+	spin_unlock(&t->sighand->siglock);
+	new_t = kdb_prev_t != t;
+	kdb_prev_t = t;
+	if (t->state != TASK_RUNNING && new_t) {
+		kdb_printf("Process is not RUNNING, sending a signal from "
+			   "kdb risks deadlock\n"
+			   "on the run queue locks. "
+			   "The signal has _not_ been sent.\n"
+			   "Reissue the kill command if you want to risk "
+			   "the deadlock.\n");
+		return;
+	}
+	sig = info->si_signo;
+	if (send_sig_info(sig, info, t))
+		kdb_printf("Fail to deliver Signal %d to process %d.\n",
+			   sig, t->pid);
+	else
+		kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid);
+}
+#endif	/* CONFIG_KGDB_KDB */