ARM: ux500: use symbolic names for interrupt flags

This switches to including <dt-bindings/interrupt-controller/irq.h>
and referencing the apropriate flags from there instead of
open-coding the flag numerals everywhere in the ux500 device
trees.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/dbx5x0.dtsi

@@ -9,6 +9,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "skeleton.dtsi"
 
 / {
@@ -31,33 +32,33 @@ intc: interrupt-controller@a0411000 {
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -70,7 +71,7 @@ gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -83,7 +84,7 @@ gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
+			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -96,7 +97,7 @@ gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
+			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -109,7 +110,7 @@ gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -122,7 +123,7 @@ gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
+			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -135,7 +136,7 @@ gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -148,7 +149,7 @@ gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -161,7 +162,7 @@ gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -179,7 +180,7 @@ usb_per5@a03e0000 {
 			compatible = "stericsson,db8500-musb",
 				"mentor,musb";
 			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 
 			dr_mode = "otg";
@@ -215,7 +216,7 @@ dma: dma-controller@801C0000 {
 			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 			reg = <0x801C0000 0x1000 0x40010000 0x800>;
 			reg-names = "base", "lcpa";
-			interrupts = <0 25 0x4>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
@@ -225,7 +226,7 @@ prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 0x4>;
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
@@ -240,7 +241,8 @@ prcmu-timer-4@80157450 {
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
-				interrupts = <21 0x4>, <22 0x4>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
 				status = "disabled";
 			 };
@@ -354,21 +356,21 @@ db8500_esram34_ret_reg: db8500_esram34_ret {
 			ab8500 {
 				compatible = "stericsson,ab8500";
 				interrupt-parent = <&intc>;
-				interrupts = <0 40 0x4>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 0x4
-					              18 0x4>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 0x4
-						      39 0x4>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 				};
@@ -401,13 +403,13 @@ ab8500_chargalg {
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 0x4
-						       96 0x4
-						       14 0x4
-						       15 0x4
-						       79 0x4
-						       74 0x4
-						       75 0x4>;
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -422,8 +424,8 @@ ab8500_usb {
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 0x4
-						      7 0x4>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
@@ -518,7 +520,7 @@ ab8500_ldo_ana_reg: ab8500_ldo_ana {
 		i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -531,7 +533,7 @@ i2c@80004000 {
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
+			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -544,7 +546,7 @@ i2c@80122000 {
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
+			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -557,7 +559,7 @@ i2c@80128000 {
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -570,7 +572,7 @@ i2c@80110000 {
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -583,7 +585,7 @@ i2c@8012a000 {
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 0x4>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -597,7 +599,7 @@ ssp@80002000 {
 		uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
 			       <&dma 13 0 0x0>; /* Logical - MemToDev */
@@ -609,7 +611,7 @@ uart@80120000 {
 		uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
 			       <&dma 12 0 0x0>; /* Logical - MemToDev */
@@ -621,7 +623,7 @@ uart@80121000 {
 		uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
+			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
 			       <&dma 11 0 0x0>; /* Logical - MemToDev */
@@ -633,7 +635,7 @@ uart@80007000 {
 		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
 			       <&dma 29 0 0x0>; /* Logical - MemToDev */
@@ -645,7 +647,7 @@ sdi0_per1@80126000 {
 		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
 			       <&dma 32 0 0x0>; /* Logical - MemToDev */
@@ -657,7 +659,7 @@ sdi1_per2@80118000 {
 		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
+			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
 			       <&dma 28 0 0x0>; /* Logical - MemToDev */
@@ -669,14 +671,14 @@ sdi2_per3@80005000 {
 		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
 
 			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
 			       <&dma 42 0 0x0>; /* Logical - MemToDev */
@@ -688,14 +690,14 @@ sdi4_per2@80114000 {
 		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 0x4>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 0x4>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -703,7 +705,7 @@ msp0: msp@80123000 {
 		msp1: msp@80124000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -712,7 +714,7 @@ msp1: msp@80124000 {
 		msp2: msp@80117000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 0x4>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -720,7 +722,7 @@ msp2: msp@80117000 {
 		msp3: msp@80125000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -759,7 +761,7 @@ vmmci: regulator-gpio {
 		cryp@a03cb000 {
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
-			interrupts = <0 15 0x4>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 
 			v-ape-supply = <&db8500_vape_reg>;
 		};

arch/arm/boot/dts/href.dtsi

@@ -9,6 +9,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "dbx5x0.dtsi"
 
 / {
@@ -45,14 +46,14 @@ tc3589x@42 {
 				compatible = "tc3589x";
 				reg = <0x42>;
 				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
 
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				tc3589x_gpio: tc3589x_gpio {
 					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 
 					interrupt-controller;
 					#interrupt-cells = <2>;

arch/arm/boot/dts/snowball.dts

@@ -105,7 +105,7 @@ external-bus@50000000 {
 			ethernet@0 {
 				compatible = "smsc,lan9115";
 				reg = <0 0x10000>;
-				interrupts = <12 0x1>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&gpio4>;
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;

arch/arm/boot/dts/stuib.dtsi

@@ -9,13 +9,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
+
 / {
 	soc {
 		i2c@80004000 {
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x2>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;