Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Various small bugfixes and enhancements, plus two new drivers:
   - A quite complex ab8500 charger driver, submitted by Arun Murthy @
     ST-Ericsson;
   - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce
     E Robertson and Alan Cox @ Intel.

  And that's all."

* tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits)
  max17042_battery: Clean up interrupt handling
  Revert "max8998_charger: Include linux/module.h just once"
  ab8500_fg: Fix some build warnings on x86_64
  max17042_battery: Fix CHARGE_FULL representation.
  max8998_charger: Include linux/module.h just once
  power_supply: Convert i2c drivers to module_i2c_driver
  lp8727_charger: Add MODULE_DEVICE_TABLE
  charger-manager: Simplify charger_get_property(), get rid of a warning
  charger-manager: Clean up for better readability
  da9052-battery: Convert to use module_platform_driver
  da9052-battery: Fix a memory leak when unload the module
  da9052-battery: Add missing platform_set_drvdata
  ab8500: Turn unneeded global symbols into local ones
  ab8500_fg: Fix copy-paste error
  ab8500_fg: Get rid of 'struct battery_type'
  ab8500_fg: Get rid of 'struct v_to_cap'
  ab8500_btemp: Get rid of 'enum adc_therm'
  ab8500_charger: Convert to the new USB OTG calls
  ab8500-btemp: AB8500 battery temperature driver
  ab8500-fg: A8500 fuel gauge driver
  ...

Documentation/devicetree/bindings/power_supply/max17042_battery.txt

+max17042_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17042"
+
+Optional properties :
+ - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
+                         (datasheet-recommended value is 10000).
+   Defining this property enables current-sense functionality.
+
+Example:
+
+	battery-charger@36 {
+		compatible = "maxim,max17042";
+		reg = <0x36>;
+		maxim,rsns-microohm = <10000>;
+	};

drivers/power/Kconfig

@@ -249,7 +249,7 @@ config CHARGER_TWL4030
 	  Say Y here to enable support for TWL4030 Battery Charge Interface.
 
 config CHARGER_LP8727
-	tristate "National Semiconductor LP8727 charger driver"
+	tristate "TI/National Semiconductor LP8727 charger driver"
 	depends on I2C
 	help
 	  Say Y here to enable support for LP8727 Charger Driver.
@@ -288,4 +288,23 @@ config CHARGER_MAX8998
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX8998/LP3974 PMICs.
 
+config CHARGER_SMB347
+	tristate "Summit Microelectronics SMB347 Battery Charger"
+	depends on I2C
+	help
+	  Say Y to include support for Summit Microelectronics SMB347
+	  Battery Charger.
+
+config AB8500_BM
+	bool "AB8500 Battery Management Driver"
+	depends on AB8500_CORE && AB8500_GPADC
+	help
+	  Say Y to include support for AB5500 battery management.
+
+config AB8500_BATTERY_THERM_ON_BATCTRL
+	bool "Thermistor connected on BATCTRL ADC"
+	depends on AB8500_BM
+	help
+	  Say Y to enable battery temperature measurements using
+	  thermistor connected on BATCTRL ADC.
 endif # POWER_SUPPLY

drivers/power/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
@@ -42,3 +43,4 @@ obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o

drivers/power/charger-manager.c

@@ -134,12 +134,11 @@ static int get_batt_uV(struct charger_manager *cm, int *uV)
 	union power_supply_propval val;
 	int ret;
 
-	if (cm->fuel_gauge)
-		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
-				POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
-	else
+	if (!cm->fuel_gauge)
 		return -ENODEV;
 
+	ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+				POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
 	if (ret)
 		return ret;
 
@@ -245,9 +244,7 @@ static int try_charger_enable(struct charger_manager *cm, bool enable)
 	struct charger_desc *desc = cm->desc;
 
 	/* Ignore if it's redundent command */
-	if (enable && cm->charger_enabled)
-		return 0;
-	if (!enable && !cm->charger_enabled)
+	if (enable == cm->charger_enabled)
 		return 0;
 
 	if (enable) {
@@ -309,9 +306,7 @@ static void uevent_notify(struct charger_manager *cm, const char *event)
 
 		if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE))
 			return; /* Duplicated. */
-		else
 		strncpy(env_str_save, event, UEVENT_BUF_SIZE);
-
 		return;
 	}
 
@@ -387,8 +382,10 @@ static bool cm_monitor(void)
 
 	mutex_lock(&cm_list_mtx);
 
-	list_for_each_entry(cm, &cm_list, entry)
-		stop = stop || _cm_monitor(cm);
+	list_for_each_entry(cm, &cm_list, entry) {
+		if (_cm_monitor(cm))
+			stop = true;
+	}
 
 	mutex_unlock(&cm_list_mtx);
 
@@ -402,7 +399,8 @@ static int charger_get_property(struct power_supply *psy,
 	struct charger_manager *cm = container_of(psy,
 			struct charger_manager, charger_psy);
 	struct charger_desc *desc = cm->desc;
-	int i, ret = 0, uV;
+	int ret = 0;
+	int uV;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
@@ -428,8 +426,7 @@ static int charger_get_property(struct power_supply *psy,
 			val->intval = 0;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		ret = get_batt_uV(cm, &i);
-		val->intval = i;
+		ret = get_batt_uV(cm, &val->intval);
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
@@ -697,8 +694,10 @@ bool cm_suspend_again(void)
 	mutex_lock(&cm_list_mtx);
 	list_for_each_entry(cm, &cm_list, entry) {
 		if (cm->status_save_ext_pwr_inserted != is_ext_pwr_online(cm) ||
-		    cm->status_save_batt != is_batt_present(cm))
+		    cm->status_save_batt != is_batt_present(cm)) {
 			ret = false;
+			break;
+		}
 	}
 	mutex_unlock(&cm_list_mtx);
 
@@ -855,11 +854,10 @@ static int charger_manager_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, cm);
 
-	memcpy(&cm->charger_psy, &psy_default,
-				sizeof(psy_default));
+	memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default));
+
 	if (!desc->psy_name) {
-		strncpy(cm->psy_name_buf, psy_default.name,
-				PSY_NAME_MAX);
+		strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
 	} else {
 		strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
 	}
@@ -894,15 +892,15 @@ static int charger_manager_probe(struct platform_device *pdev)
 				POWER_SUPPLY_PROP_CURRENT_NOW;
 		cm->charger_psy.num_properties++;
 	}
-	if (!desc->measure_battery_temp) {
-		cm->charger_psy.properties[cm->charger_psy.num_properties] =
-				POWER_SUPPLY_PROP_TEMP_AMBIENT;
-		cm->charger_psy.num_properties++;
-	}
+
 	if (desc->measure_battery_temp) {
 		cm->charger_psy.properties[cm->charger_psy.num_properties] =
 				POWER_SUPPLY_PROP_TEMP;
 		cm->charger_psy.num_properties++;
+	} else {
+		cm->charger_psy.properties[cm->charger_psy.num_properties] =
+				POWER_SUPPLY_PROP_TEMP_AMBIENT;
+		cm->charger_psy.num_properties++;
 	}
 
 	ret = power_supply_register(NULL, &cm->charger_psy);
@@ -933,7 +931,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	return 0;
 
 err_chg_enable:
-	if (desc->charger_regulators)
 	regulator_bulk_free(desc->num_charger_regulators,
 			    desc->charger_regulators);
 err_bulk_get:
@@ -961,10 +958,8 @@ static int __devexit charger_manager_remove(struct platform_device *pdev)
 	list_del(&cm->entry);
 	mutex_unlock(&cm_list_mtx);
 
-	if (desc->charger_regulators)
 	regulator_bulk_free(desc->num_charger_regulators,
 			    desc->charger_regulators);
-
 	power_supply_unregister(&cm->charger_psy);
 	kfree(cm->charger_psy.properties);
 	kfree(cm->charger_stat);
@@ -982,9 +977,7 @@ MODULE_DEVICE_TABLE(platform, charger_manager_id);
 
 static int cm_suspend_prepare(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct charger_manager *cm = platform_get_drvdata(pdev);
+	struct charger_manager *cm = dev_get_drvdata(dev);
 
 	if (!cm_suspended) {
 		if (rtc_dev) {
@@ -1020,9 +1013,7 @@ static int cm_suspend_prepare(struct device *dev)
 
 static void cm_suspend_complete(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device,
-						    dev);
-	struct charger_manager *cm = platform_get_drvdata(pdev);
+	struct charger_manager *cm = dev_get_drvdata(dev);
 
 	if (cm_suspended) {
 		if (rtc_dev) {

drivers/power/da9052-battery.c

@@ -612,6 +612,7 @@ static s32 __devinit da9052_bat_probe(struct platform_device *pdev)
 	 if (ret)
 		goto err;
 
+	platform_set_drvdata(pdev, bat);
 	return 0;
 
 err:
@@ -633,6 +634,7 @@ static int __devexit da9052_bat_remove(struct platform_device *pdev)
 		free_irq(bat->da9052->irq_base + irq, bat);
 	}
 	power_supply_unregister(&bat->psy);
+	kfree(bat);
 
 	return 0;
 }
@@ -645,18 +647,7 @@ static struct platform_driver da9052_bat_driver = {
 		.owner = THIS_MODULE,
 	},
 };
-
-static int __init da9052_bat_init(void)
-{
-	return platform_driver_register(&da9052_bat_driver);
-}
-module_init(da9052_bat_init);
-
-static void __exit da9052_bat_exit(void)
-{
-	platform_driver_unregister(&da9052_bat_driver);
-}
-module_exit(da9052_bat_exit);
+module_platform_driver(da9052_bat_driver);
 
 MODULE_DESCRIPTION("DA9052 BAT Device Driver");
 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");

drivers/power/ds2782_battery.c

@@ -403,18 +403,7 @@ static struct i2c_driver ds278x_battery_driver = {
 	.remove		= ds278x_battery_remove,
 	.id_table	= ds278x_id,
 };
-
-static int __init ds278x_init(void)
-{
-	return i2c_add_driver(&ds278x_battery_driver);
-}
-module_init(ds278x_init);
-
-static void __exit ds278x_exit(void)
-{
-	i2c_del_driver(&ds278x_battery_driver);
-}
-module_exit(ds278x_exit);
+module_i2c_driver(ds278x_battery_driver);
 
 MODULE_AUTHOR("Ryan Mallon");
 MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");

drivers/power/isp1704_charger.c

@@ -480,6 +480,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
 
 	dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
 
+	isp1704_charger_set_power(isp, 0);
 	return ret;
 }
 

drivers/power/lp8727_charger.c

 /*
- * Driver for LP8727 Micro/Mini USB IC with intergrated charger
+ * Driver for LP8727 Micro/Mini USB IC with integrated charger
  *
+ *			Copyright (C) 2011 Texas Instruments
  *			Copyright (C) 2011 National Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
@@ -91,7 +92,7 @@ struct lp8727_chg {
 	enum lp8727_dev_id devid;
 };
 
-static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
+static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
 {
 	s32 ret;
 
@@ -102,29 +103,22 @@ static int lp8727_i2c_read(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
 	return (ret != len) ? -EIO : 0;
 }
 
-static int lp8727_i2c_write(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
+static inline int lp8727_read_byte(struct lp8727_chg *pchg, u8 reg, u8 *data)
 {
-	s32 ret;
+	return lp8727_read_bytes(pchg, reg, data, 1);
+}
+
+static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data)
+{
+	int ret;
 
 	mutex_lock(&pchg->xfer_lock);
-	ret = i2c_smbus_write_i2c_block_data(pchg->client, reg, len, data);
+	ret = i2c_smbus_write_byte_data(pchg->client, reg, data);
 	mutex_unlock(&pchg->xfer_lock);
 
 	return ret;
 }
 
-static inline int lp8727_i2c_read_byte(struct lp8727_chg *pchg, u8 reg,
-				       u8 *data)
-{
-	return lp8727_i2c_read(pchg, reg, data, 1);
-}
-
-static inline int lp8727_i2c_write_byte(struct lp8727_chg *pchg, u8 reg,
-					u8 *data)
-{
-	return lp8727_i2c_write(pchg, reg, data, 1);
-}
-
 static int lp8727_is_charger_attached(const char *name, int id)
 {
 	if (name) {
@@ -137,37 +131,41 @@ static int lp8727_is_charger_attached(const char *name, int id)
 	return (id >= ID_TA && id <= ID_USB_CHG) ? 1 : 0;
 }
 
-static void lp8727_init_device(struct lp8727_chg *pchg)
+static int lp8727_init_device(struct lp8727_chg *pchg)
 {
 	u8 val;
+	int ret;
 
 	val = ID200_EN | ADC_EN | CP_EN;
-	if (lp8727_i2c_write_byte(pchg, CTRL1, &val))
-		dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL1);
+	ret = lp8727_write_byte(pchg, CTRL1, val);
+	if (ret)
+		return ret;
 
 	val = INT_EN | CHGDET_EN;
-	if (lp8727_i2c_write_byte(pchg, CTRL2, &val))
-		dev_err(pchg->dev, "i2c write err : addr=0x%.2x\n", CTRL2);
+	ret = lp8727_write_byte(pchg, CTRL2, val);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg)
 {
 	u8 val;
-	lp8727_i2c_read_byte(pchg, STATUS1, &val);
-	return (val & DCPORT);
+	lp8727_read_byte(pchg, STATUS1, &val);
+	return val & DCPORT;
 }
 
 static int lp8727_is_usb_charger(struct lp8727_chg *pchg)
 {
 	u8 val;
-	lp8727_i2c_read_byte(pchg, STATUS1, &val);
-	return (val & CHPORT);
+	lp8727_read_byte(pchg, STATUS1, &val);
+	return val & CHPORT;
 }
 
 static void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw)
 {
-	u8 val = sw;
-	lp8727_i2c_write_byte(pchg, SWCTRL, &val);
+	lp8727_write_byte(pchg, SWCTRL, sw);
 }
 
 static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin)
@@ -207,9 +205,9 @@ static void lp8727_enable_chgdet(struct lp8727_chg *pchg)
 {
 	u8 val;
 
-	lp8727_i2c_read_byte(pchg, CTRL2, &val);
+	lp8727_read_byte(pchg, CTRL2, &val);
 	val |= CHGDET_EN;
-	lp8727_i2c_write_byte(pchg, CTRL2, &val);
+	lp8727_write_byte(pchg, CTRL2, val);
 }
 
 static void lp8727_delayed_func(struct work_struct *_work)
@@ -218,7 +216,7 @@ static void lp8727_delayed_func(struct work_struct *_work)
 	struct lp8727_chg *pchg =
 	    container_of(_work, struct lp8727_chg, work.work);
 
-	if (lp8727_i2c_read(pchg, INT1, intstat, 2)) {
+	if (lp8727_read_bytes(pchg, INT1, intstat, 2)) {
 		dev_err(pchg->dev, "can not read INT registers\n");
 		return;
 	}
@@ -244,20 +242,22 @@ static irqreturn_t lp8727_isr_func(int irq, void *ptr)
 	return IRQ_HANDLED;
 }
 
-static void lp8727_intr_config(struct lp8727_chg *pchg)
+static int lp8727_intr_config(struct lp8727_chg *pchg)
 {
 	INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func);
 
 	pchg->irqthread = create_singlethread_workqueue("lp8727-irqthd");
-	if (!pchg->irqthread)
+	if (!pchg->irqthread) {
 		dev_err(pchg->dev, "can not create thread for lp8727\n");
+		return -ENOMEM;
+	}
 
-	if (request_threaded_irq(pchg->client->irq,
+	return request_threaded_irq(pchg->client->irq,
 				NULL,
 				lp8727_isr_func,
-				 IRQF_TRIGGER_FALLING, "lp8727_irq", pchg)) {
-		dev_err(pchg->dev, "lp8727 irq can not be registered\n");
-	}
+				IRQF_TRIGGER_FALLING,
+				"lp8727_irq",
+				pchg);
 }
 
 static enum power_supply_property lp8727_charger_prop[] = {
@@ -300,7 +300,7 @@ static int lp8727_battery_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		if (lp8727_is_charger_attached(psy->name, pchg->devid)) {
-			lp8727_i2c_read_byte(pchg, STATUS1, &read);
+			lp8727_read_byte(pchg, STATUS1, &read);
 			if (((read & CHGSTAT) >> 4) == EOC)
 				val->intval = POWER_SUPPLY_STATUS_FULL;
 			else
@@ -310,7 +310,7 @@ static int lp8727_battery_get_property(struct power_supply *psy,
 		}
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
-		lp8727_i2c_read_byte(pchg, STATUS2, &read);
+		lp8727_read_byte(pchg, STATUS2, &read);
 		read = (read & TEMP_STAT) >> 5;
 		if (read >= 0x1 && read <= 0x3)
 			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
@@ -351,7 +351,7 @@ static void lp8727_charger_changed(struct power_supply *psy)
 			eoc_level = pchg->chg_parm->eoc_level;
 			ichg = pchg->chg_parm->ichg;
 			val = (ichg << 4) | eoc_level;
-			lp8727_i2c_write_byte(pchg, CHGCTRL2, &val);
+			lp8727_write_byte(pchg, CHGCTRL2, val);
 		}
 	}
 }
@@ -439,15 +439,29 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 
 	mutex_init(&pchg->xfer_lock);
 
-	lp8727_init_device(pchg);
-	lp8727_intr_config(pchg);
+	ret = lp8727_init_device(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "i2c communication err: %d", ret);
+		goto error;
+	}
+
+	ret = lp8727_intr_config(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "irq handler err: %d", ret);
+		goto error;
+	}
 
 	ret = lp8727_register_psy(pchg);
-	if (ret)
-		dev_err(pchg->dev,
-			"can not register power supplies. err=%d", ret);
+	if (ret) {
+		dev_err(pchg->dev, "power supplies register err: %d", ret);
+		goto error;
+	}
 
 	return 0;
+
+error:
+	kfree(pchg);
+	return ret;
 }
 
 static int __devexit lp8727_remove(struct i2c_client *cl)
@@ -466,6 +480,7 @@ static const struct i2c_device_id lp8727_ids[] = {
 	{"lp8727", 0},
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, lp8727_ids);
 
 static struct i2c_driver lp8727_driver = {
 	.driver = {
@@ -475,21 +490,9 @@ static struct i2c_driver lp8727_driver = {
 	.remove = __devexit_p(lp8727_remove),
 	.id_table = lp8727_ids,
 };
+module_i2c_driver(lp8727_driver);
 
-static int __init lp8727_init(void)
-{
-	return i2c_add_driver(&lp8727_driver);
-}
-
-static void __exit lp8727_exit(void)
-{
-	i2c_del_driver(&lp8727_driver);
-}
-
-module_init(lp8727_init);
-module_exit(lp8727_exit);
-
-MODULE_DESCRIPTION("National Semiconductor LP8727 charger driver");
-MODULE_AUTHOR
-    ("Woogyom Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver");
+MODULE_AUTHOR("Woogyom Kim <milo.kim@ti.com>, "
+	      "Daniel Jeong <daniel.jeong@ti.com>");
 MODULE_LICENSE("GPL");

drivers/power/max17040_battery.c

@@ -290,18 +290,7 @@ static struct i2c_driver max17040_i2c_driver = {
 	.resume		= max17040_resume,
 	.id_table	= max17040_id,
 };
-
-static int __init max17040_init(void)
-{
-	return i2c_add_driver(&max17040_i2c_driver);
-}
-module_init(max17040_init);
-
-static void __exit max17040_exit(void)
-{
-	i2c_del_driver(&max17040_i2c_driver);
-}
-module_exit(max17040_exit);
+module_i2c_driver(max17040_i2c_driver);
 
 MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
 MODULE_DESCRIPTION("MAX17040 Fuel Gauge");

drivers/power/sbs-battery.c

@@ -852,18 +852,7 @@ static struct i2c_driver sbs_battery_driver = {
 		.of_match_table = sbs_dt_ids,
 	},
 };
-
-static int __init sbs_battery_init(void)
-{
-	return i2c_add_driver(&sbs_battery_driver);
-}
-module_init(sbs_battery_init);
-
-static void __exit sbs_battery_exit(void)
-{
-	i2c_del_driver(&sbs_battery_driver);
-}
-module_exit(sbs_battery_exit);
+module_i2c_driver(sbs_battery_driver);
 
 MODULE_DESCRIPTION("SBS battery monitor driver");
 MODULE_LICENSE("GPL");

drivers/power/z2_battery.c

@@ -316,19 +316,7 @@ static struct i2c_driver z2_batt_driver = {
 	.remove		= __devexit_p(z2_batt_remove),
 	.id_table	= z2_batt_id,
 };
-
-static int __init z2_batt_init(void)
-{
-	return i2c_add_driver(&z2_batt_driver);
-}
-
-static void __exit z2_batt_exit(void)
-{
-	i2c_del_driver(&z2_batt_driver);
-}
-
-module_init(z2_batt_init);
-module_exit(z2_batt_exit);
+module_i2c_driver(z2_batt_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>");

include/linux/lp8727.h

 /*
+ * LP8727 Micro/Mini USB IC with integrated charger
+ *
+ *			Copyright (C) 2011 Texas Instruments
  *			Copyright (C) 2011 National Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
@@ -32,13 +35,24 @@ enum lp8727_ichg {
 	ICHG_1000mA,
 };
 
+/**
+ * struct lp8727_chg_param
+ * @eoc_level : end of charge level setting
+ * @ichg : charging current
+ */
 struct lp8727_chg_param {
-	/* end of charge level setting */
 	enum lp8727_eoc_level eoc_level;
-	/* charging current */
 	enum lp8727_ichg ichg;
 };
 
+/**
+ * struct lp8727_platform_data
+ * @get_batt_present : check battery status - exists or not
+ * @get_batt_level : get battery voltage (mV)
+ * @get_batt_capacity : get battery capacity (%)
+ * @get_batt_temp : get battery temperature
+ * @ac, @usb : charging parameters each charger type
+ */
 struct lp8727_platform_data {
 	u8 (*get_batt_present)(void);
 	u16 (*get_batt_level)(void);

include/linux/mfd/abx500.h

@@ -146,6 +146,279 @@ struct abx500_init_settings {
 	u8 setting;
 };
 
+/* Battery driver related data */
+/*
+ * ADC for the battery thermistor.
+ * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
+ * with a NTC resistor to both identify the battery and to measure its
+ * temperature. Different phone manufactures uses different techniques to both
+ * identify the battery and to read its temperature.
+ */
+enum abx500_adc_therm {
+	ABx500_ADC_THERM_BATCTRL,
+	ABx500_ADC_THERM_BATTEMP,
+};
+
+/**
+ * struct abx500_res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct abx500_res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct abx500_v_to_cap - Table for translating voltage to capacity
+ * @voltage:		Voltage in mV
+ * @capacity:		Capacity in percent
+ */
+struct abx500_v_to_cap {
+	int voltage;
+	int capacity;
+};
+
+/* Forward declaration */
+struct abx500_fg;
+
+/**
+ * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @overbat_threshold:		Over battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct abx500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int overbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct abx500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct abx500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct abx500_battery_type - different batteries supported
+ * @name:			battery technology
+ * @resis_high:			battery upper resistance limit
+ * @resis_low:			battery lower resistance limit
+ * @charge_full_design:		Maximum battery capacity in mAh
+ * @nominal_voltage:		Nominal voltage of the battery in mV
+ * @termination_vol:		max voltage upto which battery can be charged
+ * @termination_curr		battery charging termination current in mA
+ * @recharge_vol		battery voltage limit that will trigger a new
+ *				full charging cycle in the case where maintenan-
+ *				-ce charging has been disabled
+ * @normal_cur_lvl:		charger current in normal state in mA
+ * @normal_vol_lvl:		charger voltage in normal state in mV
+ * @maint_a_cur_lvl:		charger current in maintenance A state in mA
+ * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
+ * @maint_a_chg_timer_h:	charge time in maintenance A state
+ * @maint_b_cur_lvl:		charger current in maintenance B state in mA
+ * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
+ * @maint_b_chg_timer_h:	charge time in maintenance B state
+ * @low_high_cur_lvl:		charger current in temp low/high state in mA
+ * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
+ * @battery_resistance:		battery inner resistance in mOhm.
+ * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
+ * @r_to_t_tbl:			table containing resistance to temp points
+ * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
+ * @v_to_cap_tbl:		Voltage to capacity (in %) table
+ * @n_batres_tbl_elements	number of elements in the batres_tbl
+ * @batres_tbl			battery internal resistance vs temperature table
+ */
+struct abx500_battery_type {
+	int name;
+	int resis_high;
+	int resis_low;
+	int charge_full_design;
+	int nominal_voltage;
+	int termination_vol;
+	int termination_curr;
+	int recharge_vol;
+	int normal_cur_lvl;
+	int normal_vol_lvl;
+	int maint_a_cur_lvl;
+	int maint_a_vol_lvl;
+	int maint_a_chg_timer_h;
+	int maint_b_cur_lvl;
+	int maint_b_vol_lvl;
+	int maint_b_chg_timer_h;
+	int low_high_cur_lvl;
+	int low_high_vol_lvl;
+	int battery_resistance;
+	int n_temp_tbl_elements;
+	struct abx500_res_to_temp *r_to_t_tbl;
+	int n_v_cap_tbl_elements;
+	struct abx500_v_to_cap *v_to_cap_tbl;
+	int n_batres_tbl_elements;
+	struct batres_vs_temp *batres_tbl;
+};
+
+/**
+ * struct abx500_bm_capacity_levels - abx500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct abx500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct abx500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct abx500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct abx500_bm_data - abx500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_now		present battery temperature
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @auto_trig		flag to enable auto adc trigger
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct abx500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_now;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	bool auto_trig;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct abx500_maxim_parameters *maxi;
+	const struct abx500_bm_capacity_levels *cap_levels;
+	const struct abx500_battery_type *bat_type;
+	const struct abx500_bm_charger_parameters *chg_params;
+	const struct abx500_fg_parameters *fg_params;
+};
+
+struct abx500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct abx500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_bm_plat_data {
+	struct abx500_bm_data *battery;
+	struct abx500_charger_platform_data *charger;
+	struct abx500_btemp_platform_data *btemp;
+	struct abx500_fg_platform_data *fg;
+	struct abx500_chargalg_platform_data *chargalg;
+};
+
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);
 int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,

include/linux/mfd/abx500/ux500_chargalg.h

+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _UX500_CHARGALG_H
+#define _UX500_CHARGALG_H
+
+#include <linux/power_supply.h>
+
+#define psy_to_ux500_charger(x) container_of((x), \
+		struct ux500_charger, psy)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+	int (*enable) (struct ux500_charger *, int, int, int);
+	int (*kick_wd) (struct ux500_charger *);
+	int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy			power supply base class
+ * @ops			ux500 charger operations
+ * @max_out_volt	maximum output charger voltage in mV
+ * @max_out_curr	maximum output charger current in mA
+ */
+struct ux500_charger {
+	struct power_supply psy;
+	struct ux500_charger_ops ops;
+	int max_out_volt;
+	int max_out_curr;
+};
+
+#endif

include/linux/power/max17042_battery.h

@@ -27,6 +27,8 @@
 #define MAX17042_BATTERY_FULL	(100)
 #define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
 
+#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
+
 enum max17042_register {
 	MAX17042_STATUS		= 0x00,
 	MAX17042_VALRT_Th	= 0x01,
@@ -40,11 +42,11 @@ enum max17042_register {
 	MAX17042_VCELL		= 0x09,
 	MAX17042_Current	= 0x0A,
 	MAX17042_AvgCurrent	= 0x0B,
-	MAX17042_Qresidual	= 0x0C,
+
 	MAX17042_SOC		= 0x0D,
 	MAX17042_AvSOC		= 0x0E,
 	MAX17042_RemCap		= 0x0F,
-	MAX17402_FullCAP	= 0x10,
+	MAX17042_FullCAP	= 0x10,
 	MAX17042_TTE		= 0x11,
 	MAX17042_V_empty	= 0x12,
 
@@ -62,14 +64,14 @@ enum max17042_register {
 	MAX17042_AvCap		= 0x1F,
 	MAX17042_ManName	= 0x20,
 	MAX17042_DevName	= 0x21,
-	MAX17042_DevChem	= 0x22,
 
+	MAX17042_FullCAPNom	= 0x23,
 	MAX17042_TempNom	= 0x24,
-	MAX17042_TempCold	= 0x25,
+	MAX17042_TempLim	= 0x25,
 	MAX17042_TempHot	= 0x26,
 	MAX17042_AIN		= 0x27,
 	MAX17042_LearnCFG	= 0x28,
-	MAX17042_SHFTCFG	= 0x29,
+	MAX17042_FilterCFG	= 0x29,
 	MAX17042_RelaxCFG	= 0x2A,
 	MAX17042_MiscCFG	= 0x2B,
 	MAX17042_TGAIN		= 0x2C,
@@ -77,22 +79,41 @@ enum max17042_register {
 	MAX17042_CGAIN		= 0x2E,
 	MAX17042_COFF		= 0x2F,
 
-	MAX17042_Q_empty	= 0x33,
+	MAX17042_MaskSOC	= 0x32,
+	MAX17042_SOC_empty	= 0x33,
 	MAX17042_T_empty	= 0x34,
 
+	MAX17042_FullCAP0       = 0x35,
+	MAX17042_LAvg_empty	= 0x36,
+	MAX17042_FCTC		= 0x37,
 	MAX17042_RCOMP0		= 0x38,
 	MAX17042_TempCo		= 0x39,
-	MAX17042_Rx		= 0x3A,
-	MAX17042_T_empty0	= 0x3B,
+	MAX17042_EmptyTempCo	= 0x3A,
+	MAX17042_K_empty0	= 0x3B,
 	MAX17042_TaskPeriod	= 0x3C,
 	MAX17042_FSTAT		= 0x3D,
 
 	MAX17042_SHDNTIMER	= 0x3F,
 
-	MAX17042_VFRemCap	= 0x4A,
+	MAX17042_dQacc		= 0x45,
+	MAX17042_dPacc		= 0x46,
+
+	MAX17042_VFSOC0		= 0x48,
 
 	MAX17042_QH		= 0x4D,
 	MAX17042_QL		= 0x4E,
+
+	MAX17042_VFSOC0Enable	= 0x60,
+	MAX17042_MLOCKReg1	= 0x62,
+	MAX17042_MLOCKReg2	= 0x63,
+
+	MAX17042_MODELChrTbl	= 0x80,
+
+	MAX17042_OCV		= 0xEE,
+
+	MAX17042_OCVInternal	= 0xFB,
+
+	MAX17042_VFSOC		= 0xFF,
 };
 
 /*
@@ -105,10 +126,64 @@ struct max17042_reg_data {
 	u16 data;
 };
 
+struct max17042_config_data {
+	/* External current sense resistor value in milli-ohms */
+	u32	cur_sense_val;
+
+	/* A/D measurement */
+	u16	tgain;		/* 0x2C */
+	u16	toff;		/* 0x2D */
+	u16	cgain;		/* 0x2E */
+	u16	coff;		/* 0x2F */
+
+	/* Alert / Status */
+	u16	valrt_thresh;	/* 0x01 */
+	u16	talrt_thresh;	/* 0x02 */
+	u16	soc_alrt_thresh;	/* 0x03 */
+	u16	config;		/* 0x01D */
+	u16	shdntimer;	/* 0x03F */
+
+	/* App data */
+	u16	design_cap;	/* 0x18 */
+	u16	ichgt_term;	/* 0x1E */
+
+	/* MG3 config */
+	u16	at_rate;	/* 0x04 */
+	u16	learn_cfg;	/* 0x28 */
+	u16	filter_cfg;	/* 0x29 */
+	u16	relax_cfg;	/* 0x2A */
+	u16	misc_cfg;	/* 0x2B */
+	u16	masksoc;	/* 0x32 */
+
+	/* MG3 save and restore */
+	u16	fullcap;	/* 0x10 */
+	u16	fullcapnom;	/* 0x23 */
+	u16	socempty;	/* 0x33 */
+	u16	lavg_empty;	/* 0x36 */
+	u16	dqacc;		/* 0x45 */
+	u16	dpacc;		/* 0x46 */
+
+	/* Cell technology from power_supply.h */
+	u16	cell_technology;
+
+	/* Cell Data */
+	u16	vempty;		/* 0x12 */
+	u16	temp_nom;	/* 0x24 */
+	u16	temp_lim;	/* 0x25 */
+	u16	fctc;		/* 0x37 */
+	u16	rcomp0;		/* 0x38 */
+	u16	tcompc0;	/* 0x39 */
+	u16	empty_tempco;	/* 0x3A */
+	u16	kempty0;	/* 0x3B */
+	u16	cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE];
+} __packed;
+
 struct max17042_platform_data {
 	struct max17042_reg_data *init_data;
+	struct max17042_config_data *config_data;
 	int num_init_data; /* Number of enties in init_data array */
 	bool enable_current_sense;
+	bool enable_por_init; /* Use POR init from Maxim appnote */
 
 	/*
 	 * R_sns in micro-ohms.