Commit 930cbf92 authored by Jacky Huang's avatar Jacky Huang Committed by Greg Kroah-Hartman

tty: serial: Add Nuvoton ma35d1 serial driver support

This adds UART and console driver for Nuvoton ma35d1 Soc.
It supports full-duplex communication, FIFO control, and
hardware flow control.
Command line set "console=ttyNVT0,115200", NVT means
Nuvoton MA35 UART port. The UART driver probe will
create path named "/dev/ttyNVTx".
Signed-off-by: default avatarJacky Huang <ychuang3@nuvoton.com>
Reviewed-by: default avatarIlpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230619032330.233796-2-ychuang570808@gmail.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent e0edfdc1
...@@ -1555,6 +1555,29 @@ config SERIAL_SUNPLUS_CONSOLE ...@@ -1555,6 +1555,29 @@ config SERIAL_SUNPLUS_CONSOLE
you can alter that using a kernel command line option such as you can alter that using a kernel command line option such as
"console=ttySUPx". "console=ttySUPx".
config SERIAL_NUVOTON_MA35D1
tristate "Nuvoton MA35D1 family UART support"
depends on ARCH_MA35 || COMPILE_TEST
select SERIAL_CORE
help
This driver supports Nuvoton MA35D1 family UART ports. If you would
like to use them, you must answer Y or M to this option. Note that
for use as console, it must be included in kernel and not as a
module. If you enable this option, Ma35D1 serial ports in the system
will be registered as ttyNVTx.
config SERIAL_NUVOTON_MA35D1_CONSOLE
bool "Console on a Nuvotn MA35D1 family UART port"
depends on SERIAL_NUVOTON_MA35D1=y
select SERIAL_CORE_CONSOLE
help
Select this options if you'd like to use the UART port0 of the
Nuvoton MA35D1 family as a console.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default,
but you can alter that using a kernel command line option such as
"console=ttyNVTx".
endmenu endmenu
config SERIAL_MCTRL_GPIO config SERIAL_MCTRL_GPIO
......
...@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o ...@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_NUVOTON_MA35D1) += ma35d1_serial.o
// SPDX-License-Identifier: GPL-2.0+
/*
* MA35D1 serial driver
* Copyright (C) 2023 Nuvoton Technology Corp.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/iopoll.h>
#include <linux/serial_core.h>
#include <linux/slab.h>
#include <linux/tty_flip.h>
#include <linux/units.h>
#define MA35_UART_NR 17
#define MA35_RBR_REG 0x00
#define MA35_THR_REG 0x00
#define MA35_IER_REG 0x04
#define MA35_FCR_REG 0x08
#define MA35_LCR_REG 0x0C
#define MA35_MCR_REG 0x10
#define MA35_MSR_REG 0x14
#define MA35_FSR_REG 0x18
#define MA35_ISR_REG 0x1C
#define MA35_TOR_REG 0x20
#define MA35_BAUD_REG 0x24
#define MA35_ALTCTL_REG 0x2C
#define MA35_FUN_SEL_REG 0x30
#define MA35_WKCTL_REG 0x40
#define MA35_WKSTS_REG 0x44
/* MA35_IER_REG - Interrupt Enable Register */
#define MA35_IER_RDA_IEN BIT(0) /* RBR Available Interrupt Enable */
#define MA35_IER_THRE_IEN BIT(1) /* THR Empty Interrupt Enable */
#define MA35_IER_RLS_IEN BIT(2) /* RX Line Status Interrupt Enable */
#define MA35_IER_RTO_IEN BIT(4) /* RX Time-out Interrupt Enable */
#define MA35_IER_BUFERR_IEN BIT(5) /* Buffer Error Interrupt Enable */
#define MA35_IER_TIME_OUT_EN BIT(11) /* RX Buffer Time-out Counter Enable */
#define MA35_IER_AUTO_RTS BIT(12) /* nRTS Auto-flow Control Enable */
#define MA35_IER_AUTO_CTS BIT(13) /* nCTS Auto-flow Control Enable */
/* MA35_FCR_REG - FIFO Control Register */
#define MA35_FCR_RFR BIT(1) /* RX Field Software Reset */
#define MA35_FCR_TFR BIT(2) /* TX Field Software Reset */
#define MA35_FCR_RFITL_MASK GENMASK(7, 4) /* RX FIFO Interrupt Trigger Level */
#define MA35_FCR_RFITL_1BYTE FIELD_PREP(MA35_FCR_RFITL_MASK, 0)
#define MA35_FCR_RFITL_4BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 1)
#define MA35_FCR_RFITL_8BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 2)
#define MA35_FCR_RFITL_14BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 3)
#define MA35_FCR_RFITL_30BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 4)
#define MA35_FCR_RTSTL_MASK GENMASK(19, 16) /* nRTS Trigger Level */
#define MA35_FCR_RTSTL_1BYTE FIELD_PREP(MA35_FCR_RTSTL_MASK, 0)
#define MA35_FCR_RTSTL_4BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 1)
#define MA35_FCR_RTSTL_8BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 2)
#define MA35_FCR_RTSTL_14BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 3)
#define MA35_FCR_RTSTLL_30BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 4)
/* MA35_LCR_REG - Line Control Register */
#define MA35_LCR_NSB BIT(2) /* Number of “STOP Bit” */
#define MA35_LCR_PBE BIT(3) /* Parity Bit Enable */
#define MA35_LCR_EPE BIT(4) /* Even Parity Enable */
#define MA35_LCR_SPE BIT(5) /* Stick Parity Enable */
#define MA35_LCR_BREAK BIT(6) /* Break Control */
#define MA35_LCR_WLS_MASK GENMASK(1, 0) /* Word Length Selection */
#define MA35_LCR_WLS_5BITS FIELD_PREP(MA35_LCR_WLS_MASK, 0)
#define MA35_LCR_WLS_6BITS FIELD_PREP(MA35_LCR_WLS_MASK, 1)
#define MA35_LCR_WLS_7BITS FIELD_PREP(MA35_LCR_WLS_MASK, 2)
#define MA35_LCR_WLS_8BITS FIELD_PREP(MA35_LCR_WLS_MASK, 3)
/* MA35_MCR_REG - Modem Control Register */
#define MA35_MCR_RTS_CTRL BIT(1) /* nRTS Signal Control */
#define MA35_MCR_RTSACTLV BIT(9) /* nRTS Pin Active Level */
#define MA35_MCR_RTSSTS BIT(13) /* nRTS Pin Status (Read Only) */
/* MA35_MSR_REG - Modem Status Register */
#define MA35_MSR_CTSDETF BIT(0) /* Detect nCTS State Change Flag */
#define MA35_MSR_CTSSTS BIT(4) /* nCTS Pin Status (Read Only) */
#define MA35_MSR_CTSACTLV BIT(8) /* nCTS Pin Active Level */
/* MA35_FSR_REG - FIFO Status Register */
#define MA35_FSR_RX_OVER_IF BIT(0) /* RX Overflow Error Interrupt Flag */
#define MA35_FSR_PEF BIT(4) /* Parity Error Flag*/
#define MA35_FSR_FEF BIT(5) /* Framing Error Flag */
#define MA35_FSR_BIF BIT(6) /* Break Interrupt Flag */
#define MA35_FSR_RX_EMPTY BIT(14) /* Receiver FIFO Empty (Read Only) */
#define MA35_FSR_RX_FULL BIT(15) /* Receiver FIFO Full (Read Only) */
#define MA35_FSR_TX_EMPTY BIT(22) /* Transmitter FIFO Empty (Read Only) */
#define MA35_FSR_TX_FULL BIT(23) /* Transmitter FIFO Full (Read Only) */
#define MA35_FSR_TX_OVER_IF BIT(24) /* TX Overflow Error Interrupt Flag */
#define MA35_FSR_TE_FLAG BIT(28) /* Transmitter Empty Flag (Read Only) */
#define MA35_FSR_RXPTR_MSK GENMASK(13, 8) /* TX FIFO Pointer mask */
#define MA35_FSR_TXPTR_MSK GENMASK(21, 16) /* RX FIFO Pointer mask */
/* MA35_ISR_REG - Interrupt Status Register */
#define MA35_ISR_RDA_IF BIT(0) /* RBR Available Interrupt Flag */
#define MA35_ISR_THRE_IF BIT(1) /* THR Empty Interrupt Flag */
#define MA35_ISR_RLSIF BIT(2) /* Receive Line Interrupt Flag */
#define MA35_ISR_MODEMIF BIT(3) /* MODEM Interrupt Flag */
#define MA35_ISR_RXTO_IF BIT(4) /* RX Time-out Interrupt Flag */
#define MA35_ISR_BUFEIF BIT(5) /* Buffer Error Interrupt Flag */
#define MA35_ISR_WK_IF BIT(6) /* UART Wake-up Interrupt Flag */
#define MA35_ISR_RDAINT BIT(8) /* RBR Available Interrupt Indicator */
#define MA35_ISR_THRE_INT BIT(9) /* THR Empty Interrupt Indicator */
#define MA35_ISR_ALL 0xFFFFFFFF
/* MA35_BAUD_REG - Baud Rate Divider Register */
#define MA35_BAUD_MODE_MASK GENMASK(29, 28)
#define MA35_BAUD_MODE0 FIELD_PREP(MA35_BAUD_MODE_MASK, 0)
#define MA35_BAUD_MODE1 FIELD_PREP(MA35_BAUD_MODE_MASK, 2)
#define MA35_BAUD_MODE2 FIELD_PREP(MA35_BAUD_MODE_MASK, 3)
#define MA35_BAUD_MASK GENMASK(15, 0)
/* MA35_ALTCTL_REG - Alternate Control/Status Register */
#define MA35_ALTCTL_RS485AUD BIT(10) /* RS-485 Auto Direction Function */
/* MA35_FUN_SEL_REG - Function Select Register */
#define MA35_FUN_SEL_MASK GENMASK(2, 0)
#define MA35_FUN_SEL_UART FIELD_PREP(MA35_FUN_SEL_MASK, 0)
#define MA35_FUN_SEL_RS485 FIELD_PREP(MA35_FUN_SEL_MASK, 3)
/* The constrain for MA35D1 UART baud rate divider */
#define MA35_BAUD_DIV_MAX 0xFFFF
#define MA35_BAUD_DIV_MIN 11
/* UART FIFO depth */
#define MA35_UART_FIFO_DEPTH 32
/* UART console clock */
#define MA35_UART_CONSOLE_CLK (24 * HZ_PER_MHZ)
/* UART register ioremap size */
#define MA35_UART_REG_SIZE 0x100
/* Rx Timeout */
#define MA35_UART_RX_TOUT 0x40
#define MA35_IER_CONFIG (MA35_IER_RTO_IEN | MA35_IER_RDA_IEN | \
MA35_IER_TIME_OUT_EN | MA35_IER_BUFERR_IEN)
#define MA35_ISR_IF_CHECK (MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF | \
MA35_ISR_THRE_INT | MA35_ISR_BUFEIF)
#define MA35_FSR_TX_BOTH_EMPTY (MA35_FSR_TE_FLAG | MA35_FSR_TX_EMPTY)
static struct uart_driver ma35d1serial_reg;
struct uart_ma35d1_port {
struct uart_port port;
struct clk *clk;
u16 capabilities; /* port capabilities */
u8 ier;
u8 lcr;
u8 mcr;
u32 baud_rate;
u32 console_baud_rate;
u32 console_line;
u32 console_int;
};
static struct uart_ma35d1_port ma35d1serial_ports[MA35_UART_NR];
static struct uart_ma35d1_port *to_ma35d1_uart_port(struct uart_port *uart)
{
return container_of(uart, struct uart_ma35d1_port, port);
}
static u32 serial_in(struct uart_ma35d1_port *p, u32 offset)
{
return readl_relaxed(p->port.membase + offset);
}
static void serial_out(struct uart_ma35d1_port *p, u32 offset, u32 value)
{
writel_relaxed(value, p->port.membase + offset);
}
static void __stop_tx(struct uart_ma35d1_port *p)
{
u32 ier;
ier = serial_in(p, MA35_IER_REG);
if (ier & MA35_IER_THRE_IEN)
serial_out(p, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN);
}
static void ma35d1serial_stop_tx(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
__stop_tx(up);
}
static void transmit_chars(struct uart_ma35d1_port *up)
{
u32 count;
u8 ch;
if (uart_tx_stopped(&up->port)) {
ma35d1serial_stop_tx(&up->port);
return;
}
count = MA35_UART_FIFO_DEPTH - FIELD_GET(MA35_FSR_TXPTR_MSK,
serial_in(up, MA35_FSR_REG));
uart_port_tx_limited(&up->port, ch, count,
!(serial_in(up, MA35_FSR_REG) & MA35_FSR_TX_FULL),
serial_out(up, MA35_THR_REG, ch),
({}));
}
static void ma35d1serial_start_tx(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 ier;
ier = serial_in(up, MA35_IER_REG);
serial_out(up, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN);
transmit_chars(up);
serial_out(up, MA35_IER_REG, ier | MA35_IER_THRE_IEN);
}
static void ma35d1serial_stop_rx(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 ier;
ier = serial_in(up, MA35_IER_REG);
ier &= ~MA35_IER_RDA_IEN;
serial_out(up, MA35_IER_REG, ier);
}
static void receive_chars(struct uart_ma35d1_port *up)
{
int max_count = 256;
u8 ch, flag;
u32 fsr;
fsr = serial_in(up, MA35_FSR_REG);
do {
flag = TTY_NORMAL;
up->port.icount.rx++;
if (unlikely(fsr & (MA35_FSR_BIF | MA35_FSR_FEF |
MA35_FSR_PEF | MA35_FSR_RX_OVER_IF))) {
if (fsr & MA35_FSR_BIF) {
up->port.icount.brk++;
if (uart_handle_break(&up->port))
continue;
}
if (fsr & MA35_FSR_FEF)
up->port.icount.frame++;
if (fsr & MA35_FSR_PEF)
up->port.icount.parity++;
if (fsr & MA35_FSR_RX_OVER_IF)
up->port.icount.overrun++;
serial_out(up, MA35_FSR_REG,
fsr & (MA35_FSR_BIF | MA35_FSR_FEF |
MA35_FSR_PEF | MA35_FSR_RX_OVER_IF));
if (fsr & MA35_FSR_BIF)
flag = TTY_BREAK;
else if (fsr & MA35_FSR_PEF)
flag = TTY_PARITY;
else if (fsr & MA35_FSR_FEF)
flag = TTY_FRAME;
}
ch = serial_in(up, MA35_RBR_REG);
if (uart_handle_sysrq_char(&up->port, ch))
continue;
spin_lock(&up->port.lock);
uart_insert_char(&up->port, fsr, MA35_FSR_RX_OVER_IF, ch, flag);
spin_unlock(&up->port.lock);
fsr = serial_in(up, MA35_FSR_REG);
} while (!(fsr & MA35_FSR_RX_EMPTY) && (max_count-- > 0));
spin_lock(&up->port.lock);
tty_flip_buffer_push(&up->port.state->port);
spin_unlock(&up->port.lock);
}
static irqreturn_t ma35d1serial_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 isr, fsr;
isr = serial_in(up, MA35_ISR_REG);
fsr = serial_in(up, MA35_FSR_REG);
if (!(isr & MA35_ISR_IF_CHECK))
return IRQ_NONE;
if (isr & (MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF))
receive_chars(up);
if (isr & MA35_ISR_THRE_INT)
transmit_chars(up);
if (fsr & MA35_FSR_TX_OVER_IF)
serial_out(up, MA35_FSR_REG, MA35_FSR_TX_OVER_IF);
return IRQ_HANDLED;
}
static u32 ma35d1serial_tx_empty(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 fsr;
fsr = serial_in(up, MA35_FSR_REG);
if ((fsr & MA35_FSR_TX_BOTH_EMPTY) == MA35_FSR_TX_BOTH_EMPTY)
return TIOCSER_TEMT;
else
return 0;
}
static u32 ma35d1serial_get_mctrl(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 status;
u32 ret = 0;
status = serial_in(up, MA35_MSR_REG);
if (!(status & MA35_MSR_CTSSTS))
ret |= TIOCM_CTS;
return ret;
}
static void ma35d1serial_set_mctrl(struct uart_port *port, u32 mctrl)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 mcr, msr, ier;
mcr = serial_in(up, MA35_MCR_REG);
mcr &= ~MA35_MCR_RTS_CTRL;
if (mctrl & TIOCM_RTS)
mcr |= MA35_MCR_RTSACTLV;
else
mcr &= ~MA35_MCR_RTSACTLV;
if (up->mcr & UART_MCR_AFE) {
ier = serial_in(up, MA35_IER_REG);
ier |= MA35_IER_AUTO_RTS | MA35_IER_AUTO_CTS;
serial_out(up, MA35_IER_REG, ier);
up->port.flags |= UPF_HARD_FLOW;
} else {
ier = serial_in(up, MA35_IER_REG);
ier &= ~(MA35_IER_AUTO_RTS | MA35_IER_AUTO_CTS);
serial_out(up, MA35_IER_REG, ier);
up->port.flags &= ~UPF_HARD_FLOW;
}
msr = serial_in(up, MA35_MSR_REG);
msr |= MA35_MSR_CTSACTLV;
serial_out(up, MA35_MSR_REG, msr);
serial_out(up, MA35_MCR_REG, mcr);
}
static void ma35d1serial_break_ctl(struct uart_port *port, int break_state)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
unsigned long flags;
u32 lcr;
spin_lock_irqsave(&up->port.lock, flags);
lcr = serial_in(up, MA35_LCR_REG);
if (break_state != 0)
lcr |= MA35_LCR_BREAK;
else
lcr &= ~MA35_LCR_BREAK;
serial_out(up, MA35_LCR_REG, lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
}
static int ma35d1serial_startup(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
u32 fcr;
int retval;
/* Reset FIFO */
serial_out(up, MA35_FCR_REG, MA35_FCR_TFR | MA35_FCR_RFR);
/* Clear pending interrupts */
serial_out(up, MA35_ISR_REG, MA35_ISR_ALL);
retval = request_irq(port->irq, ma35d1serial_interrupt, 0,
dev_name(port->dev), port);
if (retval) {
dev_err(up->port.dev, "request irq failed.\n");
return retval;
}
fcr = serial_in(up, MA35_FCR_REG);
fcr |= MA35_FCR_RFITL_4BYTES | MA35_FCR_RTSTL_8BYTES;
serial_out(up, MA35_FCR_REG, fcr);
serial_out(up, MA35_LCR_REG, MA35_LCR_WLS_8BITS);
serial_out(up, MA35_TOR_REG, MA35_UART_RX_TOUT);
serial_out(up, MA35_IER_REG, MA35_IER_CONFIG);
return 0;
}
static void ma35d1serial_shutdown(struct uart_port *port)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
serial_out(up, MA35_IER_REG, 0);
free_irq(port->irq, port);
}
static void ma35d1serial_set_termios(struct uart_port *port,
struct ktermios *termios,
const struct ktermios *old)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
unsigned long flags;
u32 baud, quot;
u32 lcr = 0;
lcr = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
if (termios->c_cflag & CSTOPB)
lcr |= MA35_LCR_NSB;
if (termios->c_cflag & PARENB)
lcr |= MA35_LCR_PBE;
if (!(termios->c_cflag & PARODD))
lcr |= MA35_LCR_EPE;
if (termios->c_cflag & CMSPAR)
lcr |= MA35_LCR_SPE;
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / MA35_BAUD_DIV_MAX,
port->uartclk / MA35_BAUD_DIV_MIN);
/* MA35D1 UART baud rate equation: baudrate = UART_CLK / (quot + 2) */
quot = (port->uartclk / baud) - 2;
/*
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
spin_lock_irqsave(&up->port.lock, flags);
up->port.read_status_mask = MA35_FSR_RX_OVER_IF;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF;
if (termios->c_iflag & (BRKINT | PARMRK))
up->port.read_status_mask |= MA35_FSR_BIF;
/* Characteres to ignore */
up->port.ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
up->port.ignore_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF;
if (termios->c_iflag & IGNBRK) {
up->port.ignore_status_mask |= MA35_FSR_BIF;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
up->port.ignore_status_mask |= MA35_FSR_RX_OVER_IF;
}
if (termios->c_cflag & CRTSCTS)
up->mcr |= UART_MCR_AFE;
else
up->mcr &= ~UART_MCR_AFE;
uart_update_timeout(port, termios->c_cflag, baud);
ma35d1serial_set_mctrl(&up->port, up->port.mctrl);
serial_out(up, MA35_BAUD_REG, MA35_BAUD_MODE2 | FIELD_PREP(MA35_BAUD_MASK, quot));
serial_out(up, MA35_LCR_REG, lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
}
static const char *ma35d1serial_type(struct uart_port *port)
{
return "ma35d1-uart";
}
static void ma35d1serial_config_port(struct uart_port *port, int flags)
{
/*
* Driver core for serial ports forces a non-zero value for port type.
* Write an arbitrary value here to accommodate the serial core driver,
* as ID part of UAPI is redundant.
*/
port->type = 1;
}
static int ma35d1serial_verify_port(struct uart_port *port, struct serial_struct *ser)
{
if (port->type != PORT_UNKNOWN && ser->type != 1)
return -EINVAL;
return 0;
}
static const struct uart_ops ma35d1serial_ops = {
.tx_empty = ma35d1serial_tx_empty,
.set_mctrl = ma35d1serial_set_mctrl,
.get_mctrl = ma35d1serial_get_mctrl,
.stop_tx = ma35d1serial_stop_tx,
.start_tx = ma35d1serial_start_tx,
.stop_rx = ma35d1serial_stop_rx,
.break_ctl = ma35d1serial_break_ctl,
.startup = ma35d1serial_startup,
.shutdown = ma35d1serial_shutdown,
.set_termios = ma35d1serial_set_termios,
.type = ma35d1serial_type,
.config_port = ma35d1serial_config_port,
.verify_port = ma35d1serial_verify_port,
};
static const struct of_device_id ma35d1_serial_of_match[] = {
{ .compatible = "nuvoton,ma35d1-uart" },
{},
};
MODULE_DEVICE_TABLE(of, ma35d1_serial_of_match);
#ifdef CONFIG_SERIAL_NUVOTON_MA35D1_CONSOLE
static struct device_node *ma35d1serial_uart_nodes[MA35_UART_NR];
static void wait_for_xmitr(struct uart_ma35d1_port *up)
{
unsigned int reg = 0;
read_poll_timeout_atomic(serial_in, reg, reg & MA35_FSR_TX_EMPTY,
1, 10000, false,
up, MA35_FSR_REG);
}
static void ma35d1serial_console_putchar(struct uart_port *port, unsigned char ch)
{
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
wait_for_xmitr(up);
serial_out(up, MA35_THR_REG, ch);
}
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*
* The console_lock must be held when we get here.
*/
static void ma35d1serial_console_write(struct console *co, const char *s, u32 count)
{
struct uart_ma35d1_port *up = &ma35d1serial_ports[co->index];
unsigned long flags;
int locked = 1;
u32 ier;
if (up->port.sysrq)
locked = 0;
else if (oops_in_progress)
locked = spin_trylock_irqsave(&up->port.lock, flags);
else
spin_lock_irqsave(&up->port.lock, flags);
/*
* First save the IER then disable the interrupts
*/
ier = serial_in(up, MA35_IER_REG);
serial_out(up, MA35_IER_REG, 0);
uart_console_write(&up->port, s, count, ma35d1serial_console_putchar);
wait_for_xmitr(up);
serial_out(up, MA35_IER_REG, ier);
if (locked)
spin_unlock_irqrestore(&up->port.lock, flags);
}
static int __init ma35d1serial_console_setup(struct console *co, char *options)
{
struct device_node *np;
struct uart_ma35d1_port *p;
u32 val32[4];
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
if ((co->index < 0) || (co->index >= MA35_UART_NR)) {
pr_debug("Console Port%x out of range\n", co->index);
return -EINVAL;
}
np = ma35d1serial_uart_nodes[co->index];
p = &ma35d1serial_ports[co->index];
if (!np || !p)
return -ENODEV;
if (of_property_read_u32_array(np, "reg", val32, ARRAY_SIZE(val32)) != 0)
return -EINVAL;
p->port.iobase = val32[1];
p->port.membase = ioremap(p->port.iobase, MA35_UART_REG_SIZE);
if (!p->port.membase)
return -ENOMEM;
p->port.ops = &ma35d1serial_ops;
p->port.line = 0;
p->port.uartclk = MA35_UART_CONSOLE_CLK;
port = &ma35d1serial_ports[co->index].port;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console ma35d1serial_console = {
.name = "ttyNVT",
.write = ma35d1serial_console_write,
.device = uart_console_device,
.setup = ma35d1serial_console_setup,
.flags = CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
.data = &ma35d1serial_reg,
};
static void ma35d1serial_console_init_port(void)
{
u32 i = 0;
struct device_node *np;
for_each_matching_node(np, ma35d1_serial_of_match) {
if (ma35d1serial_uart_nodes[i] == NULL) {
of_node_get(np);
ma35d1serial_uart_nodes[i] = np;
i++;
if (i == MA35_UART_NR)
break;
}
}
}
static int __init ma35d1serial_console_init(void)
{
ma35d1serial_console_init_port();
register_console(&ma35d1serial_console);
return 0;
}
console_initcall(ma35d1serial_console_init);
#define MA35D1SERIAL_CONSOLE (&ma35d1serial_console)
#else
#define MA35D1SERIAL_CONSOLE NULL
#endif
static struct uart_driver ma35d1serial_reg = {
.owner = THIS_MODULE,
.driver_name = "serial",
.dev_name = "ttyNVT",
.major = TTY_MAJOR,
.minor = 64,
.cons = MA35D1SERIAL_CONSOLE,
.nr = MA35_UART_NR,
};
/*
* Register a set of serial devices attached to a platform device.
* The list is terminated with a zero flags entry, which means we expect
* all entries to have at least UPF_BOOT_AUTOCONF set.
*/
static int ma35d1serial_probe(struct platform_device *pdev)
{
struct resource *res_mem;
struct uart_ma35d1_port *up;
int ret = 0;
if (pdev->dev.of_node) {
ret = of_alias_get_id(pdev->dev.of_node, "serial");
if (ret < 0) {
dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", ret);
return ret;
}
}
up = &ma35d1serial_ports[ret];
up->port.line = ret;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
up->port.iobase = res_mem->start;
up->port.membase = ioremap(up->port.iobase, MA35_UART_REG_SIZE);
up->port.ops = &ma35d1serial_ops;
spin_lock_init(&up->port.lock);
up->clk = of_clk_get(pdev->dev.of_node, 0);
if (IS_ERR(up->clk)) {
ret = PTR_ERR(up->clk);
dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
goto err_iounmap;
}
ret = clk_prepare_enable(up->clk);
if (ret)
goto err_iounmap;
if (up->port.line != 0)
up->port.uartclk = clk_get_rate(up->clk);
ret = platform_get_irq(pdev, 0);
if (ret < 0)
goto err_clk_disable;
up->port.irq = ret;
up->port.dev = &pdev->dev;
up->port.flags = UPF_BOOT_AUTOCONF;
platform_set_drvdata(pdev, up);
ret = uart_add_one_port(&ma35d1serial_reg, &up->port);
if (ret < 0)
goto err_free_irq;
return 0;
err_free_irq:
free_irq(up->port.irq, &up->port);
err_clk_disable:
clk_disable_unprepare(up->clk);
err_iounmap:
iounmap(up->port.membase);
return ret;
}
/*
* Remove serial ports registered against a platform device.
*/
static int ma35d1serial_remove(struct platform_device *dev)
{
struct uart_port *port = platform_get_drvdata(dev);
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
uart_remove_one_port(&ma35d1serial_reg, port);
clk_disable_unprepare(up->clk);
return 0;
}
static int ma35d1serial_suspend(struct platform_device *dev, pm_message_t state)
{
struct uart_port *port = platform_get_drvdata(dev);
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
uart_suspend_port(&ma35d1serial_reg, &up->port);
if (up->port.line == 0) {
up->console_baud_rate = serial_in(up, MA35_BAUD_REG);
up->console_line = serial_in(up, MA35_LCR_REG);
up->console_int = serial_in(up, MA35_IER_REG);
}
return 0;
}
static int ma35d1serial_resume(struct platform_device *dev)
{
struct uart_port *port = platform_get_drvdata(dev);
struct uart_ma35d1_port *up = to_ma35d1_uart_port(port);
if (up->port.line == 0) {
serial_out(up, MA35_BAUD_REG, up->console_baud_rate);
serial_out(up, MA35_LCR_REG, up->console_line);
serial_out(up, MA35_IER_REG, up->console_int);
}
uart_resume_port(&ma35d1serial_reg, &up->port);
return 0;
}
static struct platform_driver ma35d1serial_driver = {
.probe = ma35d1serial_probe,
.remove = ma35d1serial_remove,
.suspend = ma35d1serial_suspend,
.resume = ma35d1serial_resume,
.driver = {
.name = "ma35d1-uart",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ma35d1_serial_of_match),
},
};
static int __init ma35d1serial_init(void)
{
int ret;
ret = uart_register_driver(&ma35d1serial_reg);
if (ret)
return ret;
ret = platform_driver_register(&ma35d1serial_driver);
if (ret)
uart_unregister_driver(&ma35d1serial_reg);
return ret;
}
static void __exit ma35d1serial_exit(void)
{
platform_driver_unregister(&ma35d1serial_driver);
uart_unregister_driver(&ma35d1serial_reg);
}
module_init(ma35d1serial_init);
module_exit(ma35d1serial_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MA35D1 serial driver");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment