Commit 97e563bf authored by Iskren Chernev's avatar Iskren Chernev Committed by Bjorn Andersson

arm64: dts: qcom: sm6115: Add basic soc dtsi

Add support for Qualcomm SM6115 SoC. This includes:
- GCC
- Pinctrl
- RPM (CC+PD)
- USB
- MMC
- UFS
Signed-off-by: default avatarIskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-7-iskren.chernev@gmail.com
parent f1f9a6a0
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
*/
#include <dt-bindings/clock/qcom,gcc-sm6115.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x1>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x2>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x3>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x101>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x102>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x103>;
capacity-dmips-mhz = <1638>;
dynamic-power-coefficient = <282>;
enable-method = "psci";
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sm6115", "qcom,scm";
#reset-cells = <1>;
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@45700000 {
reg = <0x0 0x45700000 0x0 0x600000>;
no-map;
};
xbl_aop_mem: memory@45e00000 {
reg = <0x0 0x45e00000 0x0 0x140000>;
no-map;
};
sec_apps_mem: memory@45fff000 {
reg = <0x0 0x45fff000 0x0 0x1000>;
no-map;
};
smem_mem: memory@46000000 {
compatible = "qcom,smem";
reg = <0x0 0x46000000 0x0 0x200000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
};
cdsp_sec_mem: memory@46200000 {
reg = <0x0 0x46200000 0x0 0x1e00000>;
no-map;
};
pil_modem_mem: memory@4ab00000 {
reg = <0x0 0x4ab00000 0x0 0x6900000>;
no-map;
};
pil_video_mem: memory@51400000 {
reg = <0x0 0x51400000 0x0 0x500000>;
no-map;
};
wlan_msa_mem: memory@51900000 {
reg = <0x0 0x51900000 0x0 0x100000>;
no-map;
};
pil_cdsp_mem: memory@51a00000 {
reg = <0x0 0x51a00000 0x0 0x1e00000>;
no-map;
};
pil_adsp_mem: memory@53800000 {
reg = <0x0 0x53800000 0x0 0x2800000>;
no-map;
};
pil_ipa_fw_mem: memory@56100000 {
reg = <0x0 0x56100000 0x0 0x10000>;
no-map;
};
pil_ipa_gsi_mem: memory@56110000 {
reg = <0x0 0x56110000 0x0 0x5000>;
no-map;
};
pil_gpu_mem: memory@56115000 {
reg = <0x0 0x56115000 0x0 0x2000>;
no-map;
};
cont_splash_memory: memory@5c000000 {
reg = <0x0 0x5c000000 0x0 0x00f00000>;
no-map;
};
dfps_data_memory: memory@5cf00000 {
reg = <0x0 0x5cf00000 0x0 0x0100000>;
no-map;
};
removed_mem: memory@60000000 {
reg = <0x0 0x60000000 0x0 0x3900000>;
no-map;
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6115";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sm6115-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
tcsr_mutex: hwlock@340000 {
compatible = "qcom,tcsr-mutex";
reg = <0x00340000 0x20000>;
#hwlock-cells = <1>;
};
tlmm: pinctrl@500000 {
compatible = "qcom,sm6115-tlmm";
reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 121>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_state_off: sdc1-off-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc2_state_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
sd-cd-pins {
pins = "gpio88";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
};
sdc2_state_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
};
sd-cd-pins {
pins = "gpio88";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
};
};
gcc: clock-controller@1400000 {
compatible = "qcom,gcc-sm6115";
reg = <0x01400000 0x1f0000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
clock-names = "bi_tcxo", "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
usb_1_hsphy: phy@1613000 {
compatible = "qcom,sm6115-qusb2-phy";
reg = <0x01613000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2_hstx_trim>;
status = "disabled";
};
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x01b40000 0x7000>;
#address-cells = <1>;
#size-cells = <1>;
qusb2_hstx_trim: hstx-trim@25b {
reg = <0x25b 0x1>;
bits = <1 4>;
};
};
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x01c40000 0x1100>,
<0x01e00000 0x2000000>,
<0x03e00000 0x100000>,
<0x03f00000 0xa0000>,
<0x01c0a000 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x045f0000 0x7000>;
};
sdhc_1: mmc@4744000 {
compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "iface", "core", "xo", "ice";
pinctrl-0 = <&sdc1_state_on>;
pinctrl-1 = <&sdc1_state_off>;
pinctrl-names = "default", "sleep";
bus-width = <8>;
status = "disabled";
};
sdhc_2: mmc@4784000 {
compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04784000 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&xo_board>;
clock-names = "iface", "core", "xo";
pinctrl-0 = <&sdc2_state_on>;
pinctrl-1 = <&sdc2_state_off>;
pinctrl-names = "default", "sleep";
power-domains = <&rpmpd SM6115_VDDCX>;
operating-points-v2 = <&sdhc2_opp_table>;
iommus = <&apps_smmu 0x00a0 0x0>;
resets = <&gcc GCC_SDCC2_BCR>;
bus-width = <4>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040868>;
status = "disabled";
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmpd_opp_nom>;
};
};
};
ufs_mem_hc: ufs@4804000 {
compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy_lanes>;
phy-names = "ufsphy";
lanes-per-direction = <1>;
#reset-cells = <1>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
power-domains = <&gcc GCC_UFS_PHY_GDSC>;
iommus = <&apps_smmu 0x100 0>;
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
clock-names = "core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"ice_core_clk";
freq-table-hz = <50000000 200000000>,
<0 0>,
<0 0>,
<37500000 150000000>,
<75000000 300000000>,
<0 0>,
<0 0>,
<0 0>;
status = "disabled";
};
ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6115-qmp-ufs-phy";
reg = <0x04807000 0x1c4>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
clock-names = "ref", "ref_aux";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
status = "disabled";
ufs_mem_phy_lanes: phy@4807400 {
reg = <0x4807400 0x098>,
<0x4807600 0x130>,
<0x4807c00 0x16c>;
#phy-cells = <0>;
};
};
usb_1: usb@4ef8800 {
compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>;
clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <66666667>;
interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq";
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
usb_1_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x04e00000 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb_1_hsphy>;
phy-names = "usb2-phy";
iommus = <&apps_smmu 0x120 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
maximum-speed = "high-speed";
dr_mode = "peripheral";
};
};
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6115-smmu-500", "arm,mmu-500";
reg = <0x0c600000 0x80000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
};
apcs_glb: mailbox@f111000 {
compatible = "qcom,sm6115-apcs-hmss-global";
reg = <0x0f111000 0x1000>;
#mbox-cells = <1>;
};
timer@f120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0f120000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clock-frequency = <19200000>;
frame@f121000 {
reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
frame@f123000 {
reg = <0x0f123000 0x1000>;
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f124000 {
reg = <0x0f124000 0x1000>;
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f125000 {
reg = <0x0f125000 0x1000>;
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f126000 {
reg = <0x0f126000 0x1000>;
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f127000 {
reg = <0x0f127000 0x1000>;
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@f128000 {
reg = <0x0f128000 0x1000>;
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment