arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply

According to the power grid documentation, the 0.8v HS PHY shared
regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP
boards.

Fixes: d7e03cce ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/x1e80100-crd.dts

@@ -990,7 +990,7 @@ &uart21 {
 };
 
 &usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_0_eusb2_repeater>;
@@ -1022,7 +1022,7 @@ &usb_1_ss0_qmpphy_out {
 };
 
 &usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_1_eusb2_repeater>;
@@ -1054,7 +1054,7 @@ &usb_1_ss1_qmpphy_out {
 };
 
 &usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_2_eusb2_repeater>;

arch/arm64/boot/dts/qcom/x1e80100-qcp.dts

@@ -842,7 +842,7 @@ &uart21 {
 };
 
 &usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_0_eusb2_repeater>;
@@ -874,7 +874,7 @@ &usb_1_ss0_qmpphy_out {
 };
 
 &usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_1_eusb2_repeater>;
@@ -906,7 +906,7 @@ &usb_1_ss1_qmpphy_out {
 };
 
 &usb_1_ss2_hsphy {
-	vdd-supply = <&vreg_l2e_0p8>;
+	vdd-supply = <&vreg_l3j_0p8>;
 	vdda12-supply = <&vreg_l2j_1p2>;
 
 	phys = <&smb2360_2_eusb2_repeater>;