drm/amd/pm: support overdrive vddgfx offset setting(V2)

This is supported by Sienna Cichlid, Navy Flounder and Dimgrey
Cavefish. For these ASICs, the target voltage calculation can be
illustrated by "voltage = voltage calculated from v/f curve +
overdrive vddgfx offset".

V2: limit the smu_version check for Sienna Cichlid only

Here are some sample usages about this new OD setting:
1. Check current vddgfx offset setting by
cat /sys/class/drm/card0/device/pp_od_clk_voltage
...
...
OD_VDDGFX_OFFSET:
0mV
...
...

2. Set new vddgfx offset by
echo "vo 10" > /sys/class/drm/card0/device/pp_od_clk_voltage
cat /sys/class/drm/card0/device/pp_od_clk_voltage
...
...
OD_VDDGFX_OFFSET:
10mV
...
...
3. Commit the new setting by
echo "c" > /sys/class/drm/card0/device/pp_od_clk_voltage
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/include/kgd_pp_interface.h

@@ -157,7 +157,8 @@ enum PP_OD_DPM_TABLE_COMMAND {
 	PP_OD_EDIT_MCLK_VDDC_TABLE,
 	PP_OD_EDIT_VDDC_CURVE,
 	PP_OD_RESTORE_DEFAULT_TABLE,
-	PP_OD_COMMIT_DPM_TABLE
+	PP_OD_COMMIT_DPM_TABLE,
+	PP_OD_EDIT_VDDGFX_OFFSET
 };
 
 struct pp_states_info {

drivers/gpu/drm/amd/pm/amdgpu_pm.c

@@ -736,6 +736,12 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
  * - three <frequency, voltage> points labeled OD_VDDC_CURVE.
  *   They can be used to calibrate the sclk voltage curve.
  *
+ * - voltage offset(in mV) applied on target voltage calculation.
+ *   This is available for Sienna Cichlid, Navy Flounder and Dimgrey
+ *   Cavefish. For these ASICs, the target voltage calculation can be
+ *   illustrated by "voltage = voltage calculated from v/f curve +
+ *   overdrive vddgfx offset"
+ *
  * - a list of valid ranges for sclk, mclk, and voltage curve points
  *   labeled OD_RANGE
  *
@@ -756,6 +762,11 @@ static ssize_t amdgpu_set_pp_table(struct device *dev,
  *   600mV. "vc 2 1000 1000" will update point3 with clock set
  *   as 1000Mhz and voltage 1000mV.
  *
+ *   To update the voltage offset applied for gfxclk/voltage calculation,
+ *   enter the new value by writing a string that contains "vo offset".
+ *   This is supported by Sienna Cichlid, Navy Flounder and Dimgrey Cavefish.
+ *   And the offset can be a positive or negative value.
+ *
  * - When you have edited all of the states as needed, write "c" (commit)
  *   to the file to commit your changes
  *
@@ -796,6 +807,8 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
 		type = PP_OD_COMMIT_DPM_TABLE;
 	else if (!strncmp(buf, "vc", 2))
 		type = PP_OD_EDIT_VDDC_CURVE;
+	else if (!strncmp(buf, "vo", 2))
+		type = PP_OD_EDIT_VDDGFX_OFFSET;
 	else
 		return -EINVAL;
 
@@ -803,7 +816,8 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev,
 
 	tmp_str = buf_cpy;
 
-	if (type == PP_OD_EDIT_VDDC_CURVE)
+	if ((type == PP_OD_EDIT_VDDC_CURVE) ||
+	     (type == PP_OD_EDIT_VDDGFX_OFFSET))
 		tmp_str++;
 	while (isspace(*++tmp_str));
 
@@ -899,6 +913,7 @@ static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
 		size = smu_print_clk_levels(&adev->smu, SMU_OD_SCLK, buf);
 		size += smu_print_clk_levels(&adev->smu, SMU_OD_MCLK, buf+size);
 		size += smu_print_clk_levels(&adev->smu, SMU_OD_VDDC_CURVE, buf+size);
+		size += smu_print_clk_levels(&adev->smu, SMU_OD_VDDGFX_OFFSET, buf+size);
 		size += smu_print_clk_levels(&adev->smu, SMU_OD_RANGE, buf+size);
 	} else if (adev->powerplay.pp_funcs->print_clock_levels) {
 		size = amdgpu_dpm_print_clock_levels(adev, OD_SCLK, buf);

drivers/gpu/drm/amd/pm/inc/smu_types.h

@@ -241,6 +241,7 @@ enum smu_clk_type {
 	SMU_OD_MCLK,
 	SMU_OD_VDDC_CURVE,
 	SMU_OD_RANGE,
+	SMU_OD_VDDGFX_OFFSET,
 	SMU_CLK_COUNT,
 };
 

drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c

@@ -946,6 +946,7 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
 	uint32_t mark_index = 0;
 	uint32_t gen_speed, lane_width;
 	uint32_t min_value, max_value;
+	uint32_t smu_version;
 
 	switch (clk_type) {
 	case SMU_GFXCLK:
@@ -1043,6 +1044,23 @@ static int sienna_cichlid_print_clk_levels(struct smu_context *smu,
 		size += sprintf(buf + size, "0: %uMhz\n1: %uMHz\n", od_table->UclkFmin, od_table->UclkFmax);
 		break;
 
+	case SMU_OD_VDDGFX_OFFSET:
+		if (!smu->od_enabled || !od_table || !od_settings)
+			break;
+
+		/*
+		 * OD GFX Voltage Offset functionality is supported only by 58.41.0
+		 * and onwards SMU firmwares.
+		 */
+		smu_cmn_get_smc_version(smu, NULL, &smu_version);
+		if ((adev->asic_type == CHIP_SIENNA_CICHLID) &&
+		     (smu_version < 0x003a2900))
+			break;
+
+		size += sprintf(buf + size, "OD_VDDGFX_OFFSET:\n");
+		size += sprintf(buf + size, "%dmV\n", od_table->VddGfxOffset);
+		break;
+
 	case SMU_OD_RANGE:
 		if (!smu->od_enabled || !od_table || !od_settings)
 			break;
@@ -1770,10 +1788,18 @@ static int sienna_cichlid_get_dpm_ultimate_freq(struct smu_context *smu,
 static void sienna_cichlid_dump_od_table(struct smu_context *smu,
 					 OverDriveTable_t *od_table)
 {
+	struct amdgpu_device *adev = smu->adev;
+	uint32_t smu_version;
+
 	dev_dbg(smu->adev->dev, "OD: Gfxclk: (%d, %d)\n", od_table->GfxclkFmin,
 							  od_table->GfxclkFmax);
 	dev_dbg(smu->adev->dev, "OD: Uclk: (%d, %d)\n", od_table->UclkFmin,
 							od_table->UclkFmax);
+
+	smu_cmn_get_smc_version(smu, NULL, &smu_version);
+	if (!((adev->asic_type == CHIP_SIENNA_CICHLID) &&
+	       (smu_version < 0x003a2900)))
+		dev_dbg(smu->adev->dev, "OD: VddGfxOffset: %d\n", od_table->VddGfxOffset);
 }
 
 static int sienna_cichlid_set_default_od_settings(struct smu_context *smu)
@@ -1826,9 +1852,11 @@ static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu,
 		(OverDriveTable_t *)table_context->overdrive_table;
 	struct smu_11_0_7_overdrive_table *od_settings =
 		(struct smu_11_0_7_overdrive_table *)smu->od_settings;
+	struct amdgpu_device *adev = smu->adev;
 	enum SMU_11_0_7_ODSETTING_ID freq_setting;
 	uint16_t *freq_ptr;
 	int i, ret = 0;
+	uint32_t smu_version;
 
 	if (!smu->od_enabled) {
 		dev_warn(smu->adev->dev, "OverDrive is not enabled!\n");
@@ -1964,6 +1992,29 @@ static int sienna_cichlid_od_edit_dpm_table(struct smu_context *smu,
 		}
 		break;
 
+	case PP_OD_EDIT_VDDGFX_OFFSET:
+		if (size != 1) {
+			dev_info(smu->adev->dev, "invalid number of parameters: %d\n", size);
+			return -EINVAL;
+		}
+
+		/*
+		 * OD GFX Voltage Offset functionality is supported only by 58.41.0
+		 * and onwards SMU firmwares.
+		 */
+		smu_cmn_get_smc_version(smu, NULL, &smu_version);
+		if ((adev->asic_type == CHIP_SIENNA_CICHLID) &&
+		     (smu_version < 0x003a2900)) {
+			dev_err(smu->adev->dev, "OD GFX Voltage offset functionality is supported "
+						"only by 58.41.0 and onwards SMU firmwares!\n");
+			return -EOPNOTSUPP;
+		}
+
+		od_table->VddGfxOffset = (int16_t)input[0];
+
+		sienna_cichlid_dump_od_table(smu, od_table);
+		break;
+
 	default:
 		return -ENOSYS;
 	}