e1000e: 82571-based mezzanine card can fail ethtool link test

On certain 82571-based mezzanine NICs in some blade servers, the ethtool
link test can fail due to the serdes_has_link flag not set correctly.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/e1000e/82571.c

@@ -1523,8 +1523,10 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    e1000_serdes_link_autoneg_progress;
 				mac->serdes_has_link = false;
 				e_dbg("AN_UP     -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
 			}
-		break;
+			break;
 
 		case e1000_serdes_link_forced_up:
 			/*
@@ -1543,6 +1545,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    e1000_serdes_link_autoneg_progress;
 				mac->serdes_has_link = false;
 				e_dbg("FORCED_UP -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
 			}
 			break;
 
@@ -1598,6 +1602,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
+			mac->serdes_has_link = false;
 			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}