Merge tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new ARM SoC support from Arnd Bergmann:
 "There are two new SoC families this time, and both appear fairly
  similar: The Nuvoton MA35D1 and the STMicroelectronics STM32MP2 are
  both dual-core Cortex-A35 based chips for the low-power industrial
  embedded market, and they mark the first 64-bit product in a widely
  used family of 32-bit Arm MCUs and SoCs.

  The way into the kernel is completely different here: The team at ST
  has a long history of working upstream with their STM32MP1 and other
  SoCs, and they produced a complete port to arm64 together with the
  initial announcement. Nuvoton also has multiple SoC product lines with
  current or previous upstream support, but those are maintained by
  third parties and are unrelated. The patch series from Nuvoton's Jacky
  Huang had to go through many revisisions to get to this point and is
  still missing a few drivers including the serial port for the moment.

  The branch contains the devicetree files as well as all the code
  changes, in order to have something that can be tested standalone"

* tag 'soc-newsoc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  clk: nuvoton: Use clk_parent_data instead of string for parent clock
  clk: nuvoton: Update all constant hex values to lowercase
  clk: nuvoton: Add clk-ma35d1.h for driver extern functions
  remoteproc: stm32: use correct format strings on 64-bit
  MAINTAINERS: add entry for ARM/STM32 ARCHITECTURE
  arm64: defconfig: enable ARCH_STM32 and STM32 serial driver
  arm64: dts: st: add stm32mp257f-ev1 board support
  dt-bindings: stm32: document stm32mp257f-ev1 board
  arm64: dts: st: introduce stm32mp25 pinctrl files
  arm64: dts: st: introduce stm32mp25 SoCs family
  arm64: introduce STM32 family on Armv8 architecture
  dt-bindings: stm32: add st,stm32mp25-syscfg compatible for syscon
  pinctrl: stm32: add stm32mp257 pinctrl support
  dt-bindings: pinctrl: stm32: support for stm32mp257 and additional packages
  Documentation/process: add soc maintainer handbook
  reset: RESET_NUVOTON_MA35D1 should depend on ARCH_MA35
  reset: Add Nuvoton ma35d1 reset driver support
  clk: nuvoton: Add clock driver for ma35d1 clock controller
  arm64: dts: nuvoton: Add initial ma35d1 device tree
  dt-bindings: serial: Document ma35d1 uart controller
  ...

Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35 series SoC based platforms
+
+maintainers:
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
+  the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: MA35D1 based boards
+        items:
+          - enum:
+              - nuvoton,ma35d1-iot
+              - nuvoton,ma35d1-som
+          - const: nuvoton,ma35d1
+
+additionalProperties: true
+...

Documentation/devicetree/bindings/arm/npcm/npcm.yaml → Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml

 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: NPCM Platforms

Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml

@@ -15,12 +15,13 @@ properties:
     oneOf:
       - items:
           - enum:
-              - st,stm32mp157-syscfg
-              - st,stm32mp151-pwr-mcu
-              - st,stm32-syscfg
               - st,stm32-power-config
+              - st,stm32-syscfg
               - st,stm32-tamp
               - st,stm32f4-gcan
+              - st,stm32mp151-pwr-mcu
+              - st,stm32mp157-syscfg
+              - st,stm32mp25-syscfg
           - const: syscon
       - items:
           - const: st,stm32-tamp

Documentation/devicetree/bindings/arm/stm32/stm32.yaml

@@ -161,6 +161,12 @@ properties:
           - const: phytec,phycore-stm32mp157c-som
           - const: st,stm32mp157
 
+      - description: ST STM32MP257 based Boards
+        items:
+          - enum:
+              - st,stm32mp257f-ev1
+          - const: st,stm32mp257
+
 additionalProperties: true
 
 ...

Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  The MA35D1 clock controller generates clocks for the whole chip,
+  including system clocks and all peripheral clocks.
+
+  See also:
+    include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-clk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,pll-mode:
+    description:
+      A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+      EPLL, and VPLL in sequential.
+    maxItems: 5
+    items:
+      enum:
+        - integer
+        - fractional
+        - spread-spectrum
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    clock-controller@40460200 {
+        compatible = "nuvoton,ma35d1-clk";
+        reg = <0x40460200 0x100>;
+        #clock-cells = <1>;
+        clocks = <&clk_hxt>;
+    };
+...

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -27,6 +27,8 @@ properties:
       - st,stm32mp135-pinctrl
       - st,stm32mp157-pinctrl
       - st,stm32mp157-z-pinctrl
+      - st,stm32mp257-pinctrl
+      - st,stm32mp257-z-pinctrl
 
   '#address-cells':
     const: 1
@@ -56,7 +58,7 @@ properties:
       Indicates the SOC package used.
       More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [1, 2, 4, 8]
+    enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800]
 
 patternProperties:
   '^gpio@[0-9a-f]*$':

Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+  The system reset controller can be used to reset various peripheral
+  controllers in MA35D1 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # system reset controller node:
+  - |
+
+    system-management@40460000 {
+        compatible = "nuvoton,ma35d1-reset";
+        reg = <0x40460000 0x200>;
+        #reset-cells = <1>;
+    };
+...
+

Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Min-Jen Chen <mjchen@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    const: nuvoton,ma35d1-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+    serial@40700000 {
+        compatible = "nuvoton,ma35d1-uart";
+        reg = <0x40700000 0x100>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk UART0_GATE>;
+    };
+...

Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml → Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml

 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Global Control Registers block in Nuvoton SoCs

Documentation/process/maintainer-handbooks.rst

@@ -15,5 +15,6 @@ Contents:
    :numbered:
    :maxdepth: 2
 
-   maintainer-tip
    maintainer-netdev
+   maintainer-soc
+   maintainer-tip

Documentation/process/maintainer-soc.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+SoC Subsystem
+=============
+
+Overview
+--------
+
+The SoC subsystem is a place of aggregation for SoC-specific code.
+The main components of the subsystem are:
+
+* devicetrees for 32- & 64-bit ARM and RISC-V
+* 32-bit ARM board files (arch/arm/mach*)
+* 32- & 64-bit ARM defconfigs
+* SoC-specific drivers across architectures, in particular for 32- & 64-bit
+  ARM, RISC-V and Loongarch
+
+These "SoC-specific drivers" do not include clock, GPIO etc drivers that have
+other top-level maintainers. The drivers/soc/ directory is generally meant
+for kernel-internal drivers that are used by other drivers to provide SoC-
+specific functionality like identifying an SoC revision or interfacing with
+power domains.
+
+The SoC subsystem also serves as an intermediate location for changes to
+drivers/bus, drivers/firmware, drivers/reset and drivers/memory.  The addition
+of new platforms, or the removal of existing ones, often go through the SoC
+tree as a dedicated branch covering multiple subsystems.
+
+The main SoC tree is housed on git.kernel.org:
+  https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/
+
+Clearly this is quite a wide range of topics, which no one person, or even
+small group of people are capable of maintaining.  Instead, the SoC subsystem
+is comprised of many submaintainers, each taking care of individual platforms
+and driver subdirectories.
+In this regard, "platform" usually refers to a series of SoCs from a given
+vendor, for example, Nvidia's series of Tegra SoCs.  Many submaintainers operate
+on a vendor level, responsible for multiple product lines.  For several reasons,
+including acquisitions/different business units in a company, things vary
+significantly here.  The various submaintainers are documented in the
+MAINTAINERS file.
+
+Most of these submaintainers have their own trees where they stage patches,
+sending pull requests to the main SoC tree.  These trees are usually, but not
+always, listed in MAINTAINERS.  The main SoC maintainers can be reached via the
+alias soc@kernel.org if there is no platform-specific maintainer, or if they
+are unresponsive.
+
+What the SoC tree is not, however, is a location for architecture-specific code
+changes.  Each architecture has its own maintainers that are responsible for
+architectural details, CPU errata and the like.
+
+Information for (new) Submaintainers
+------------------------------------
+
+As new platforms spring up, they often bring with them new submaintainers,
+many of whom work for the silicon vendor, and may not be familiar with the
+process.
+
+Devicetree ABI Stability
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Perhaps one of the most important things to highlight is that dt-bindings
+document the ABI between the devicetree and the kernel.
+Please read Documentation/devicetree/bindings/ABI.rst.
+
+If changes are being made to a devicetree that are incompatible with old
+kernels, the devicetree patch should not be applied until the driver is, or an
+appropriate time later.  Most importantly, any incompatible changes should be
+clearly pointed out in the patch description and pull request, along with the
+expected impact on existing users, such as bootloaders or other operating
+systems.
+
+Driver Branch Dependencies
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A common problem is synchronizing changes between device drivers and devicetree
+files. Even if a change is compatible in both directions, this may require
+coordinating how the changes get merged through different maintainer trees.
+
+Usually the branch that includes a driver change will also include the
+corresponding change to the devicetree binding description, to ensure they are
+in fact compatible.  This means that the devicetree branch can end up causing
+warnings in the "make dtbs_check" step.  If a devicetree change depends on
+missing additions to a header file in include/dt-bindings/, it will fail the
+"make dtbs" step and not get merged.
+
+There are multiple ways to deal with this:
+
+* Avoid defining custom macros in include/dt-bindings/ for hardware constants
+  that can be derived from a datasheet -- binding macros in header files should
+  only be used as a last resort if there is no natural way to define a binding
+
+* Use literal values in the devicetree file in place of macros even when a
+  header is required, and change them to the named representation in a
+  following release
+
+* Defer the devicetree changes to a release after the binding and driver have
+  already been merged
+
+* Change the bindings in a shared immutable branch that is used as the base for
+  both the driver change and the devicetree changes
+
+* Add duplicate defines in the devicetree file guarded by an #ifndef section,
+  removing them in a later release
+
+Devicetree Naming Convention
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The general naming scheme for devicetree files is as follows.  The aspects of a
+platform that are set at the SoC level, like CPU cores, are contained in a file
+named $soc.dtsi, for example, jh7100.dtsi.  Integration details, that will vary
+from board to board, are described in $soc-$board.dts.  An example of this is
+jh7100-beaglev-starlight.dts.  Often many boards are variations on a theme, and
+frequently there are intermediate files, such as jh7100-common.dtsi, which sit
+between the $soc.dtsi and $soc-$board.dts files, containing the descriptions of
+common hardware.
+
+Some platforms also have System on Modules, containing an SoC, which are then
+integrated into several different boards. For these platforms, $soc-$som.dtsi
+and $soc-$som-$board.dts are typical.
+
+Directories are usually named after the vendor of the SoC at the time of its
+inclusion, leading to some historical directory names in the tree.
+
+Validating Devicetree Files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``make dtbs_check`` can be used to validate that devicetree files are compliant
+with the dt-bindings that describe the ABI.  Please read the section
+"Running checks" of Documentation/devicetree/bindings/writing-schema.rst for
+more information on the validation of devicetrees.
+
+For new platforms, or additions to existing ones, ``make dtbs_check`` should not
+add any new warnings.  For RISC-V, as it has the advantage of being a newer
+architecture, ``make dtbs_check W=1`` is required to not add any new warnings.
+If in any doubt about a devicetree change, reach out to the devicetree
+maintainers.
+
+Branches and Pull Requests
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Just as the main SoC tree has several branches, it is expected that
+submaintainers will do the same. Driver, defconfig and devicetree changes should
+all be split into separate branches and appear in separate pull requests to the
+SoC maintainers.  Each branch should be usable by itself and avoid
+regressions that originate from dependencies on other branches.
+
+Small sets of patches can also be sent as separate emails to soc@kernel.org,
+grouped into the same categories.
+
+If changes do not fit into the normal patterns, there can be additional
+top-level branches, e.g. for a treewide rework, or the addition of new SoC
+platforms including dts files and drivers.
+
+Branches with a lot of changes can benefit from getting split up into separate
+topics branches, even if they end up getting merged into the same branch of the
+SoC tree.  An example here would be one branch for devicetree warning fixes, one
+for a rework and one for newly added boards.
+
+Another common way to split up changes is to send an early pull request with the
+majority of the changes at some point between rc1 and rc4, following up with one
+or more smaller pull requests towards the end of the cycle that can add late
+changes or address problems identified while testing the first set.
+
+While there is no cut-off time for late pull requests, it helps to only send
+small branches as time gets closer to the merge window.
+
+Pull requests for bugfixes for the current release can be sent at any time, but
+again having multiple smaller branches is better than trying to combine too many
+patches into one pull request.
+
+The subject line of a pull request should begin with "[GIT PULL]" and made using
+a signed tag, rather than a branch.  This tag should contain a short description
+summarising the changes in the pull request.  For more detail on sending pull
+requests, please see Documentation/maintainer/pull-requests.rst.

MAINTAINERS

@@ -1627,6 +1627,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 C:	irc://irc.libera.chat/armlinux
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
+F:	Documentation/process/maintainer-soc.rst
 F:	arch/arm/boot/dts/Makefile
 F:	arch/arm64/boot/dts/Makefile
 
@@ -2493,6 +2494,18 @@ F:	drivers/rtc/rtc-ab8500.c
 F:	drivers/rtc/rtc-pl031.c
 F:	drivers/soc/ux500/
 
+ARM/NUVOTON MA35 ARCHITECTURE
+M:	Jacky Huang <ychuang3@nuvoton.com>
+M:	Shan-Chun Hung <schung@nuvoton.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	Documentation/devicetree/bindings/*/*/*ma35*
+F:	Documentation/devicetree/bindings/*/*ma35*
+F:	arch/arm64/boot/dts/nuvoton/*ma35*
+F:	drivers/*/*/*ma35*
+F:	drivers/*/*ma35*
+K:	ma35d1
+
 ARM/NUVOTON NPCM ARCHITECTURE
 M:	Avi Fishman <avifishman70@gmail.com>
 M:	Tomer Maimon <tmaimon77@gmail.com>
@@ -2504,7 +2517,6 @@ L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/*/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*npcm*
-F:	Documentation/devicetree/bindings/arm/npcm/*
 F:	Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
 F:	arch/arm/boot/dts/nuvoton/nuvoton-npcm*
 F:	arch/arm/mach-npcm/
@@ -2823,6 +2835,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-nex
 F:	arch/arm/boot/dts/st/stm32*
 F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
+F:	arch/arm64/boot/dts/st/
 N:	stm32
 N:	stm
 

arch/arm64/Kconfig.platforms

@@ -225,6 +225,14 @@ config ARCH_S32
 
 endif
 
+config ARCH_MA35
+	bool "Nuvoton MA35 Architecture"
+	select GPIOLIB
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  This enables support for the ARMv8 based Nuvoton MA35 series SoCs.
+
 config ARCH_NPCM
 	bool "Nuvoton NPCM Architecture"
 	select PINCTRL
@@ -277,6 +285,20 @@ config ARCH_INTEL_SOCFPGA
 	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
 	  Agilex and eASIC N5X.
 
+config ARCH_STM32
+	bool "STMicroelectronics STM32 SoC Family"
+	select GPIOLIB
+	select PINCTRL
+	select PINCTRL_STM32MP257
+	select ARM_SMC_MBOX
+	select ARM_SCMI_PROTOCOL
+	select COMMON_CLK_SCMI
+	help
+	  This enables support for ARMv8 based STMicroelectronics
+	  STM32 family, including:
+		- STM32MP25:
+			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
+
 config ARCH_SYNQUACER
 	bool "Socionext SynQuacer SoC Family"
 	select IRQ_FASTEOI_HIERARCHY_HANDLERS

arch/arm64/boot/dts/Makefile

@@ -27,6 +27,7 @@ subdir-y += renesas
 subdir-y += rockchip
 subdir-y += socionext
 subdir-y += sprd
+subdir-y += st
 subdir-y += synaptics
 subdir-y += tesla
 subdir-y += ti

arch/arm64/boot/dts/nuvoton/Makefile

 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-iot-512m.dtb
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-som-256m.dtb
 dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb

arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-IoT";
+	compatible = "nuvoton,ma35d1-iot", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x20000000>; /* 512M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};

arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-SOM";
+	compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x10000000>; /* 256M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};

arch/arm64/boot/dts/nuvoton/ma35d1.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+/ {
+	compatible = "nuvoton,ma35d1";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@50801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0x50801000 0 0x1000>, /* GICD */
+		      <0x0 0x50802000 0 0x2000>, /* GICC */
+		      <0x0 0x50804000 0 0x2000>, /* GICH */
+		      <0x0 0x50806000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x13) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sys: system-management@40460000 {
+			compatible = "nuvoton,ma35d1-reset";
+			reg = <0x0 0x40460000 0x0 0x200>;
+			#reset-cells = <1>;
+		};
+
+		clk: clock-controller@40460200 {
+			compatible = "nuvoton,ma35d1-clk";
+			reg = <0x00000000 0x40460200 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&clk_hxt>;
+		};
+
+		uart0: serial@40700000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40700000 0x0 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART0_GATE>;
+			status = "disabled";
+		};
+
+		uart1: serial@40710000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40710000 0x0 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART1_GATE>;
+			status = "disabled";
+		};
+
+		uart2: serial@40720000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40720000 0x0 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART2_GATE>;
+			status = "disabled";
+		};
+
+		uart3: serial@40730000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40730000 0x0 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART3_GATE>;
+			status = "disabled";
+		};
+
+		uart4: serial@40740000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40740000 0x0 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART4_GATE>;
+			status = "disabled";
+		};
+
+		uart5: serial@40750000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40750000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART5_GATE>;
+			status = "disabled";
+		};
+
+		uart6: serial@40760000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40760000 0x0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART6_GATE>;
+			status = "disabled";
+		};
+
+		uart7: serial@40770000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40770000 0x0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART7_GATE>;
+			status = "disabled";
+		};
+
+		uart8: serial@40780000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40780000 0x0 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART8_GATE>;
+			status = "disabled";
+		};
+
+		uart9: serial@40790000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40790000 0x0 0x100>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART9_GATE>;
+			status = "disabled";
+		};
+
+		uart10: serial@407a0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART10_GATE>;
+			status = "disabled";
+		};
+
+		uart11: serial@407b0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART11_GATE>;
+			status = "disabled";
+		};
+
+		uart12: serial@407c0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART12_GATE>;
+			status = "disabled";
+		};
+
+		uart13: serial@407d0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART13_GATE>;
+			status = "disabled";
+		};
+
+		uart14: serial@407e0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART14_GATE>;
+			status = "disabled";
+		};
+
+		uart15: serial@407f0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART15_GATE>;
+			status = "disabled";
+		};
+
+		uart16: serial@40880000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40880000 0x0 0x100>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART16_GATE>;
+			status = "disabled";
+		};
+	};
+};

arch/arm64/boot/dts/st/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_STM32) += stm32mp257f-ev1.dtb

arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>; /* USART2_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */
+		};
+	};
+};

arch/arm64/boot/dts/st/stm32mp251.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		ck_flexgen_08: ck-flexgen-08 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+
+		ck_flexgen_51: ck-flexgen-51 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+
+		ck_icn_ls_mcu: ck-icn-ls-mcu {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@4ac00000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x4ac10000 0x0 0x1000>,
+		      <0x0 0x4ac20000 0x0 0x2000>,
+		      <0x0 0x4ac40000 0x0 0x2000>,
+		      <0x0 0x4ac60000 0x0 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges = <0x0 0x0 0x0 0x80000000>;
+
+		rifsc: rifsc-bus@42080000 {
+			compatible = "simple-bus";
+			reg = <0x42080000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x400>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_08>;
+				status = "disabled";
+			};
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp25-syscfg", "syscon";
+			reg = <0x44230000 0x10000>;
+		};
+
+		pinctrl: pinctrl@44240000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-pinctrl";
+			ranges = <0 0x44240000 0xa0400>;
+			pins-are-numbered;
+
+			gpioa: gpio@44240000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@44250000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x10000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@44260000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@44270000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x30000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@44280000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x40000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@44290000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x50000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@442a0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x60000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@442b0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x70000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@442c0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x80000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@442d0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x90000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@442e0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa0000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pinctrl@46200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-z-pinctrl";
+			ranges = <0 0x46200000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@46200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+		};
+	};
+};

arch/arm64/boot/dts/st/stm32mp253.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp251.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};

arch/arm64/boot/dts/st/stm32mp255.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp253.dtsi"
+
+/ {
+};

arch/arm64/boot/dts/st/stm32mp257.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp255.dtsi"
+
+/ {
+};

arch/arm64/boot/dts/st/stm32mp257f-ev1.dts

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp257.dtsi"
+#include "stm32mp25xf.dtsi"
+#include "stm32mp25-pinctrl.dtsi"
+#include "stm32mp25xxai-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board";
+	compatible = "st,stm32mp257f-ev1", "st,stm32mp257";
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_idle_pins_a>;
+	pinctrl-2 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};

arch/arm64/boot/dts/st/stm32mp25xc.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};

arch/arm64/boot/dts/st/stm32mp25xf.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};

arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AI>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@442d0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@442e0000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};

arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AK>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};

arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi

+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AL>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};

arch/arm64/configs/defconfig

@@ -52,12 +52,14 @@ CONFIG_ARCH_NXP=y
 CONFIG_ARCH_LAYERSCAPE=y
 CONFIG_ARCH_MXC=y
 CONFIG_ARCH_S32=y
+CONFIG_ARCH_MA35=y
 CONFIG_ARCH_NPCM=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_STM32=y
 CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TESLA_FSD=y
@@ -461,6 +463,8 @@ CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_SERIAL_FSL_LINFLEXUART=y
 CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_SERIAL_OWL=y
 CONFIG_SERIAL_DEV_BUS=y

drivers/clk/Kconfig

@@ -478,6 +478,7 @@ source "drivers/clk/meson/Kconfig"
 source "drivers/clk/mstar/Kconfig"
 source "drivers/clk/microchip/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
+source "drivers/clk/nuvoton/Kconfig"
 source "drivers/clk/pistachio/Kconfig"
 source "drivers/clk/qcom/Kconfig"
 source "drivers/clk/ralink/Kconfig"

drivers/clk/Makefile

@@ -106,6 +106,7 @@ endif
 obj-y					+= mstar/
 obj-y					+= mvebu/
 obj-$(CONFIG_ARCH_MXS)			+= mxs/
+obj-$(CONFIG_ARCH_MA35)			+= nuvoton/
 obj-$(CONFIG_COMMON_CLK_NXP)		+= nxp/
 obj-$(CONFIG_COMMON_CLK_PISTACHIO)	+= pistachio/
 obj-$(CONFIG_COMMON_CLK_PXA)		+= pxa/

drivers/clk/nuvoton/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+# common clock support for Nuvoton SoC family.
+
+config COMMON_CLK_NUVOTON
+	bool "Nuvoton clock controller common support"
+	depends on ARCH_MA35 || COMPILE_TEST
+	default y
+	help
+	  Say y here to enable common clock controller for Nuvoton platforms.
+
+if COMMON_CLK_NUVOTON
+
+config CLK_MA35D1
+	bool "Nuvoton MA35D1 clock controller support"
+	default y
+	help
+	  Build the clock controller driver for MA35D1 SoC.
+
+endif

drivers/clk/nuvoton/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1.o
+obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-divider.o
+obj-$(CONFIG_CLK_MA35D1) += clk-ma35d1-pll.o

drivers/clk/nuvoton/clk-ma35d1-divider.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@nuvoton.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include "clk-ma35d1.h"
+
+struct ma35d1_adc_clk_div {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 shift;
+	u8 width;
+	u32 mask;
+	const struct clk_div_table *table;
+	/* protects concurrent access to clock divider registers */
+	spinlock_t *lock;
+};
+
+static inline struct ma35d1_adc_clk_div *to_ma35d1_adc_clk_div(struct clk_hw *_hw)
+{
+	return container_of(_hw, struct ma35d1_adc_clk_div, hw);
+}
+
+static unsigned long ma35d1_clkdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	unsigned int val;
+	struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+	val = readl_relaxed(dclk->reg) >> dclk->shift;
+	val &= clk_div_mask(dclk->width);
+	val += 1;
+	return divider_recalc_rate(hw, parent_rate, val, dclk->table,
+				   CLK_DIVIDER_ROUND_CLOSEST, dclk->width);
+}
+
+static long ma35d1_clkdiv_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate)
+{
+	struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+	return divider_round_rate(hw, rate, prate, dclk->table,
+				  dclk->width, CLK_DIVIDER_ROUND_CLOSEST);
+}
+
+static int ma35d1_clkdiv_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate)
+{
+	int value;
+	unsigned long flags = 0;
+	u32 data;
+	struct ma35d1_adc_clk_div *dclk = to_ma35d1_adc_clk_div(hw);
+
+	value = divider_get_val(rate, parent_rate, dclk->table,
+				dclk->width, CLK_DIVIDER_ROUND_CLOSEST);
+
+	spin_lock_irqsave(dclk->lock, flags);
+
+	data = readl_relaxed(dclk->reg);
+	data &= ~(clk_div_mask(dclk->width) << dclk->shift);
+	data |= (value - 1) << dclk->shift;
+	data |= dclk->mask;
+	writel_relaxed(data, dclk->reg);
+
+	spin_unlock_irqrestore(dclk->lock, flags);
+	return 0;
+}
+
+static const struct clk_ops ma35d1_adc_clkdiv_ops = {
+	.recalc_rate = ma35d1_clkdiv_recalc_rate,
+	.round_rate = ma35d1_clkdiv_round_rate,
+	.set_rate = ma35d1_clkdiv_set_rate,
+};
+
+struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name,
+				     struct clk_hw *parent_hw, spinlock_t *lock,
+				     unsigned long flags, void __iomem *reg,
+				     u8 shift, u8 width, u32 mask_bit)
+{
+	struct ma35d1_adc_clk_div *div;
+	struct clk_init_data init;
+	struct clk_div_table *table;
+	struct clk_parent_data pdata = { .index = 0 };
+	u32 max_div, min_div;
+	struct clk_hw *hw;
+	int ret;
+	int i;
+
+	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	max_div = clk_div_mask(width) + 1;
+	min_div = 1;
+
+	table = devm_kcalloc(dev, max_div + 1, sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < max_div; i++) {
+		table[i].val = min_div + i;
+		table[i].div = 2 * table[i].val;
+	}
+	table[max_div].val = 0;
+	table[max_div].div = 0;
+
+	memset(&init, 0, sizeof(init));
+	init.name = name;
+	init.ops = &ma35d1_adc_clkdiv_ops;
+	init.flags |= flags;
+	pdata.hw = parent_hw;
+	init.parent_data = &pdata;
+	init.num_parents = 1;
+
+	div->reg = reg;
+	div->shift = shift;
+	div->width = width;
+	div->mask = mask_bit ? BIT(mask_bit) : 0;
+	div->lock = lock;
+	div->hw.init = &init;
+	div->table = table;
+
+	hw = &div->hw;
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+	return hw;
+}
+EXPORT_SYMBOL_GPL(ma35d1_reg_adc_clkdiv);

drivers/clk/nuvoton/clk-ma35d1-pll.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@nuvoton.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/slab.h>
+#include <linux/units.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+#include "clk-ma35d1.h"
+
+/* PLL frequency limits */
+#define PLL_FREF_MAX_FREQ	(200 * HZ_PER_MHZ)
+#define PLL_FREF_MIN_FREQ	(1 * HZ_PER_MHZ)
+#define PLL_FREF_M_MAX_FREQ	(40 * HZ_PER_MHZ)
+#define PLL_FREF_M_MIN_FREQ	(10 * HZ_PER_MHZ)
+#define PLL_FCLK_MAX_FREQ	(2400 * HZ_PER_MHZ)
+#define PLL_FCLK_MIN_FREQ	(600 * HZ_PER_MHZ)
+#define PLL_FCLKO_MAX_FREQ	(2400 * HZ_PER_MHZ)
+#define PLL_FCLKO_MIN_FREQ	(85700 * HZ_PER_KHZ)
+#define PLL_SS_RATE		0x77
+#define PLL_SLOPE		0x58CFA
+
+#define REG_PLL_CTL0_OFFSET	0x0
+#define REG_PLL_CTL1_OFFSET	0x4
+#define REG_PLL_CTL2_OFFSET	0x8
+
+/* bit fields for REG_CLK_PLL0CTL0, which is SMIC PLL design */
+#define SPLL0_CTL0_FBDIV	GENMASK(7, 0)
+#define SPLL0_CTL0_INDIV	GENMASK(11, 8)
+#define SPLL0_CTL0_OUTDIV	GENMASK(13, 12)
+#define SPLL0_CTL0_PD		BIT(16)
+#define SPLL0_CTL0_BP		BIT(17)
+
+/* bit fields for REG_CLK_PLLxCTL0 ~ REG_CLK_PLLxCTL2, where x = 2 ~ 5 */
+#define PLL_CTL0_FBDIV		GENMASK(10, 0)
+#define PLL_CTL0_INDIV		GENMASK(17, 12)
+#define PLL_CTL0_MODE		GENMASK(19, 18)
+#define PLL_CTL0_SSRATE		GENMASK(30, 20)
+#define PLL_CTL1_PD		BIT(0)
+#define PLL_CTL1_BP		BIT(1)
+#define PLL_CTL1_OUTDIV		GENMASK(6, 4)
+#define PLL_CTL1_FRAC		GENMASK(31, 24)
+#define PLL_CTL2_SLOPE		GENMASK(23, 0)
+
+#define INDIV_MIN		1
+#define INDIV_MAX		63
+#define FBDIV_MIN		16
+#define FBDIV_MAX		2047
+#define FBDIV_FRAC_MIN		1600
+#define FBDIV_FRAC_MAX		204700
+#define OUTDIV_MIN		1
+#define OUTDIV_MAX		7
+
+#define PLL_MODE_INT            0
+#define PLL_MODE_FRAC           1
+#define PLL_MODE_SS             2
+
+struct ma35d1_clk_pll {
+	struct clk_hw hw;
+	u32 id;
+	u8 mode;
+	void __iomem *ctl0_base;
+	void __iomem *ctl1_base;
+	void __iomem *ctl2_base;
+};
+
+static inline struct ma35d1_clk_pll *to_ma35d1_clk_pll(struct clk_hw *_hw)
+{
+	return container_of(_hw, struct ma35d1_clk_pll, hw);
+}
+
+static unsigned long ma35d1_calc_smic_pll_freq(u32 pll0_ctl0,
+					       unsigned long parent_rate)
+{
+	u32 m, n, p, outdiv;
+	u64 pll_freq;
+
+	if (pll0_ctl0 & SPLL0_CTL0_BP)
+		return parent_rate;
+
+	n = FIELD_GET(SPLL0_CTL0_FBDIV, pll0_ctl0);
+	m = FIELD_GET(SPLL0_CTL0_INDIV, pll0_ctl0);
+	p = FIELD_GET(SPLL0_CTL0_OUTDIV, pll0_ctl0);
+	outdiv = 1 << p;
+	pll_freq = (u64)parent_rate * n;
+	div_u64(pll_freq, m * outdiv);
+	return pll_freq;
+}
+
+static unsigned long ma35d1_calc_pll_freq(u8 mode, u32 *reg_ctl, unsigned long parent_rate)
+{
+	unsigned long pll_freq, x;
+	u32 m, n, p;
+
+	if (reg_ctl[1] & PLL_CTL1_BP)
+		return parent_rate;
+
+	n = FIELD_GET(PLL_CTL0_FBDIV, reg_ctl[0]);
+	m = FIELD_GET(PLL_CTL0_INDIV, reg_ctl[0]);
+	p = FIELD_GET(PLL_CTL1_OUTDIV, reg_ctl[1]);
+
+	if (mode == PLL_MODE_INT) {
+		pll_freq = (u64)parent_rate * n;
+		div_u64(pll_freq, m * p);
+	} else {
+		x = FIELD_GET(PLL_CTL1_FRAC, reg_ctl[1]);
+		/* 2 decimal places floating to integer (ex. 1.23 to 123) */
+		n = n * 100 + ((x * 100) / FIELD_MAX(PLL_CTL1_FRAC));
+		pll_freq = div_u64(parent_rate * n, 100 * m * p);
+	}
+	return pll_freq;
+}
+
+static int ma35d1_pll_find_closest(struct ma35d1_clk_pll *pll, unsigned long rate,
+				   unsigned long parent_rate, u32 *reg_ctl,
+				   unsigned long *freq)
+{
+	unsigned long min_diff = ULONG_MAX;
+	int fbdiv_min, fbdiv_max;
+	int p, m, n;
+
+	*freq = 0;
+	if (rate < PLL_FCLKO_MIN_FREQ || rate > PLL_FCLKO_MAX_FREQ)
+		return -EINVAL;
+
+	if (pll->mode == PLL_MODE_INT) {
+		fbdiv_min = FBDIV_MIN;
+		fbdiv_max = FBDIV_MAX;
+	} else {
+		fbdiv_min = FBDIV_FRAC_MIN;
+		fbdiv_max = FBDIV_FRAC_MAX;
+	}
+
+	for (m = INDIV_MIN; m <= INDIV_MAX; m++) {
+		for (n = fbdiv_min; n <= fbdiv_max; n++) {
+			for (p = OUTDIV_MIN; p <= OUTDIV_MAX; p++) {
+				unsigned long tmp, fout, fclk, diff;
+
+				tmp = div_u64(parent_rate, m);
+				if (tmp < PLL_FREF_M_MIN_FREQ ||
+				    tmp > PLL_FREF_M_MAX_FREQ)
+					continue; /* constrain */
+
+				fclk = div_u64(parent_rate * n, m);
+				/* for 2 decimal places */
+				if (pll->mode != PLL_MODE_INT)
+					fclk = div_u64(fclk, 100);
+
+				if (fclk < PLL_FCLK_MIN_FREQ ||
+				    fclk > PLL_FCLK_MAX_FREQ)
+					continue; /* constrain */
+
+				fout = div_u64(fclk, p);
+				if (fout < PLL_FCLKO_MIN_FREQ ||
+				    fout > PLL_FCLKO_MAX_FREQ)
+					continue; /* constrain */
+
+				diff = abs(rate - fout);
+				if (diff < min_diff) {
+					reg_ctl[0] = FIELD_PREP(PLL_CTL0_INDIV, m) |
+						     FIELD_PREP(PLL_CTL0_FBDIV, n);
+					reg_ctl[1] = FIELD_PREP(PLL_CTL1_OUTDIV, p);
+					*freq = fout;
+					min_diff = diff;
+					if (min_diff == 0)
+						break;
+				}
+			}
+		}
+	}
+	if (*freq == 0)
+		return -EINVAL; /* cannot find even one valid setting */
+	return 0;
+}
+
+static int ma35d1_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 reg_ctl[3] = { 0 };
+	unsigned long pll_freq;
+	int ret;
+
+	if (parent_rate < PLL_FREF_MIN_FREQ || parent_rate > PLL_FREF_MAX_FREQ)
+		return -EINVAL;
+
+	ret = ma35d1_pll_find_closest(pll, rate, parent_rate, reg_ctl, &pll_freq);
+	if (ret != 0)
+		return ret;
+
+	switch (pll->mode) {
+	case PLL_MODE_INT:
+		reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_INT);
+		break;
+	case PLL_MODE_FRAC:
+		reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_FRAC);
+		break;
+	case PLL_MODE_SS:
+		reg_ctl[0] |= FIELD_PREP(PLL_CTL0_MODE, PLL_MODE_SS) |
+			      FIELD_PREP(PLL_CTL0_SSRATE, PLL_SS_RATE);
+		reg_ctl[2] = FIELD_PREP(PLL_CTL2_SLOPE, PLL_SLOPE);
+		break;
+	}
+	reg_ctl[1] |= PLL_CTL1_PD;
+
+	writel_relaxed(reg_ctl[0], pll->ctl0_base);
+	writel_relaxed(reg_ctl[1], pll->ctl1_base);
+	writel_relaxed(reg_ctl[2], pll->ctl2_base);
+	return 0;
+}
+
+static unsigned long ma35d1_clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 reg_ctl[3];
+	unsigned long pll_freq;
+
+	if (parent_rate < PLL_FREF_MIN_FREQ || parent_rate > PLL_FREF_MAX_FREQ)
+		return 0;
+
+	switch (pll->id) {
+	case CAPLL:
+		reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+		pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], parent_rate);
+		return pll_freq;
+	case DDRPLL:
+	case APLL:
+	case EPLL:
+	case VPLL:
+		reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+		reg_ctl[1] = readl_relaxed(pll->ctl1_base);
+		pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, parent_rate);
+		return pll_freq;
+	}
+	return 0;
+}
+
+static long ma35d1_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 reg_ctl[3] = { 0 };
+	unsigned long pll_freq;
+	long ret;
+
+	if (*parent_rate < PLL_FREF_MIN_FREQ || *parent_rate > PLL_FREF_MAX_FREQ)
+		return -EINVAL;
+
+	ret = ma35d1_pll_find_closest(pll, rate, *parent_rate, reg_ctl, &pll_freq);
+	if (ret < 0)
+		return ret;
+
+	switch (pll->id) {
+	case CAPLL:
+		reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+		pll_freq = ma35d1_calc_smic_pll_freq(reg_ctl[0], *parent_rate);
+		return pll_freq;
+	case DDRPLL:
+	case APLL:
+	case EPLL:
+	case VPLL:
+		reg_ctl[0] = readl_relaxed(pll->ctl0_base);
+		reg_ctl[1] = readl_relaxed(pll->ctl1_base);
+		pll_freq = ma35d1_calc_pll_freq(pll->mode, reg_ctl, *parent_rate);
+		return pll_freq;
+	}
+	return 0;
+}
+
+static int ma35d1_clk_pll_is_prepared(struct clk_hw *hw)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 val = readl_relaxed(pll->ctl1_base);
+
+	return !(val & PLL_CTL1_PD);
+}
+
+static int ma35d1_clk_pll_prepare(struct clk_hw *hw)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->ctl1_base);
+	val &= ~PLL_CTL1_PD;
+	writel_relaxed(val, pll->ctl1_base);
+	return 0;
+}
+
+static void ma35d1_clk_pll_unprepare(struct clk_hw *hw)
+{
+	struct ma35d1_clk_pll *pll = to_ma35d1_clk_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->ctl1_base);
+	val |= PLL_CTL1_PD;
+	writel_relaxed(val, pll->ctl1_base);
+}
+
+static const struct clk_ops ma35d1_clk_pll_ops = {
+	.is_prepared = ma35d1_clk_pll_is_prepared,
+	.prepare = ma35d1_clk_pll_prepare,
+	.unprepare = ma35d1_clk_pll_unprepare,
+	.set_rate = ma35d1_clk_pll_set_rate,
+	.recalc_rate = ma35d1_clk_pll_recalc_rate,
+	.round_rate = ma35d1_clk_pll_round_rate,
+};
+
+static const struct clk_ops ma35d1_clk_fixed_pll_ops = {
+	.recalc_rate = ma35d1_clk_pll_recalc_rate,
+	.round_rate = ma35d1_clk_pll_round_rate,
+};
+
+struct clk_hw *ma35d1_reg_clk_pll(struct device *dev, u32 id, u8 u8mode, const char *name,
+				  struct clk_hw *parent_hw, void __iomem *base)
+{
+	struct clk_parent_data pdata = { .index = 0 };
+	struct clk_init_data init = {};
+	struct ma35d1_clk_pll *pll;
+	struct clk_hw *hw;
+	int ret;
+
+	pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->id = id;
+	pll->mode = u8mode;
+	pll->ctl0_base = base + REG_PLL_CTL0_OFFSET;
+	pll->ctl1_base = base + REG_PLL_CTL1_OFFSET;
+	pll->ctl2_base = base + REG_PLL_CTL2_OFFSET;
+
+	init.name = name;
+	init.flags = 0;
+	pdata.hw = parent_hw;
+	init.parent_data = &pdata;
+	init.num_parents = 1;
+
+	if (id == CAPLL || id == DDRPLL)
+		init.ops = &ma35d1_clk_fixed_pll_ops;
+	else
+		init.ops = &ma35d1_clk_pll_ops;
+
+	pll->hw.init = &init;
+	hw = &pll->hw;
+
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+	return hw;
+}
+EXPORT_SYMBOL_GPL(ma35d1_reg_clk_pll);

drivers/clk/nuvoton/clk-ma35d1.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@nuvoton.com>
+ */
+
+#ifndef __DRV_CLK_NUVOTON_MA35D1_H
+#define __DRV_CLK_NUVOTON_MA35D1_H
+
+struct clk_hw *ma35d1_reg_clk_pll(struct device *dev, u32 id, u8 u8mode, const char *name,
+				  struct clk_hw *parent_hw, void __iomem *base);
+
+struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name,
+				     struct clk_hw *parent_hw, spinlock_t *lock,
+				     unsigned long flags, void __iomem *reg,
+				     u8 shift, u8 width, u32 mask_bit);
+
+#endif /* __DRV_CLK_NUVOTON_MA35D1_H */

drivers/pinctrl/stm32/Kconfig

@@ -51,4 +51,10 @@ config PINCTRL_STM32MP157
 	depends on OF && HAS_IOMEM
 	default MACH_STM32MP157
 	select PINCTRL_STM32
+
+config PINCTRL_STM32MP257
+	bool "STMicroelectronics STM32MP257 pin control" if COMPILE_TEST && !MACH_STM32MP25
+	depends on OF && HAS_IOMEM
+	default MACH_STM32MP25
+	select PINCTRL_STM32
 endif

drivers/pinctrl/stm32/Makefile

@@ -10,3 +10,4 @@ obj-$(CONFIG_PINCTRL_STM32F769)	+= pinctrl-stm32f769.o
 obj-$(CONFIG_PINCTRL_STM32H743)	+= pinctrl-stm32h743.o
 obj-$(CONFIG_PINCTRL_STM32MP135) += pinctrl-stm32mp135.o
 obj-$(CONFIG_PINCTRL_STM32MP157) += pinctrl-stm32mp157.o
+obj-$(CONFIG_PINCTRL_STM32MP257) += pinctrl-stm32mp257.o

drivers/pinctrl/stm32/pinctrl-stm32.h

@@ -24,6 +24,9 @@
 #define STM32MP_PKG_AB		BIT(1)
 #define STM32MP_PKG_AC		BIT(2)
 #define STM32MP_PKG_AD		BIT(3)
+#define STM32MP_PKG_AI		BIT(8)
+#define STM32MP_PKG_AK		BIT(10)
+#define STM32MP_PKG_AL		BIT(11)
 
 struct stm32_desc_function {
 	const char *name;

drivers/remoteproc/Kconfig

@@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC
 
 config STM32_RPROC
 	tristate "STM32 remoteproc support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	depends on REMOTEPROC
 	select MAILBOX
 	help

drivers/remoteproc/stm32_rproc.c

@@ -118,10 +118,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
 	struct device *dev = rproc->dev.parent;
 	void *va;
 
-	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
+	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
 	va = ioremap_wc(mem->dma, mem->len);
 	if (IS_ERR_OR_NULL(va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%x\n",
+		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
 			&mem->dma, mem->len);
 		return -ENOMEM;
 	}
@@ -627,7 +627,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
 
 	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
 	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
-		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+		dev_err(dev, "Unable to map memory region: %pa+%x\n",
 			&rsc_pa, RSC_TBL_SIZE);
 		ddata->rsc_va = NULL;
 		return ERR_PTR(-ENOMEM);

drivers/reset/Kconfig

@@ -143,6 +143,13 @@ config RESET_NPCM
 	  This enables the reset controller driver for Nuvoton NPCM
 	  BMC SoCs.
 
+config RESET_NUVOTON_MA35D1
+	bool "Nuvoton MA35D1 Reset Driver"
+	depends on ARCH_MA35 || COMPILE_TEST
+	default ARCH_MA35
+	help
+	  This enables the reset controller driver for Nuvoton MA35D1 SoC.
+
 config RESET_OXNAS
 	bool
 

drivers/reset/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
 obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
+obj-$(CONFIG_RESET_NUVOTON_MA35D1) += reset-ma35d1.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o

drivers/reset/reset-ma35d1.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@nuvoton.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+struct ma35d1_reset_data {
+	struct reset_controller_dev rcdev;
+	struct notifier_block restart_handler;
+	void __iomem *base;
+	/* protect registers against concurrent read-modify-write */
+	spinlock_t lock;
+};
+
+static const struct {
+	u32 reg_ofs;
+	u32 bit;
+} ma35d1_reset_map[] = {
+	[MA35D1_RESET_CHIP] =    {0x20, 0},
+	[MA35D1_RESET_CA35CR0] = {0x20, 1},
+	[MA35D1_RESET_CA35CR1] = {0x20, 2},
+	[MA35D1_RESET_CM4] =     {0x20, 3},
+	[MA35D1_RESET_PDMA0] =   {0x20, 4},
+	[MA35D1_RESET_PDMA1] =   {0x20, 5},
+	[MA35D1_RESET_PDMA2] =   {0x20, 6},
+	[MA35D1_RESET_PDMA3] =   {0x20, 7},
+	[MA35D1_RESET_DISP] =    {0x20, 9},
+	[MA35D1_RESET_VCAP0] =   {0x20, 10},
+	[MA35D1_RESET_VCAP1] =   {0x20, 11},
+	[MA35D1_RESET_GFX] =     {0x20, 12},
+	[MA35D1_RESET_VDEC] =    {0x20, 13},
+	[MA35D1_RESET_WHC0] =    {0x20, 14},
+	[MA35D1_RESET_WHC1] =    {0x20, 15},
+	[MA35D1_RESET_GMAC0] =   {0x20, 16},
+	[MA35D1_RESET_GMAC1] =   {0x20, 17},
+	[MA35D1_RESET_HWSEM] =   {0x20, 18},
+	[MA35D1_RESET_EBI] =     {0x20, 19},
+	[MA35D1_RESET_HSUSBH0] = {0x20, 20},
+	[MA35D1_RESET_HSUSBH1] = {0x20, 21},
+	[MA35D1_RESET_HSUSBD] =  {0x20, 22},
+	[MA35D1_RESET_USBHL] =   {0x20, 23},
+	[MA35D1_RESET_SDH0] =    {0x20, 24},
+	[MA35D1_RESET_SDH1] =    {0x20, 25},
+	[MA35D1_RESET_NAND] =    {0x20, 26},
+	[MA35D1_RESET_GPIO] =    {0x20, 27},
+	[MA35D1_RESET_MCTLP] =   {0x20, 28},
+	[MA35D1_RESET_MCTLC] =   {0x20, 29},
+	[MA35D1_RESET_DDRPUB] =  {0x20, 30},
+	[MA35D1_RESET_TMR0] =    {0x24, 2},
+	[MA35D1_RESET_TMR1] =    {0x24, 3},
+	[MA35D1_RESET_TMR2] =    {0x24, 4},
+	[MA35D1_RESET_TMR3] =    {0x24, 5},
+	[MA35D1_RESET_I2C0] =    {0x24, 8},
+	[MA35D1_RESET_I2C1] =    {0x24, 9},
+	[MA35D1_RESET_I2C2] =    {0x24, 10},
+	[MA35D1_RESET_I2C3] =    {0x24, 11},
+	[MA35D1_RESET_QSPI0] =   {0x24, 12},
+	[MA35D1_RESET_SPI0] =    {0x24, 13},
+	[MA35D1_RESET_SPI1] =    {0x24, 14},
+	[MA35D1_RESET_SPI2] =    {0x24, 15},
+	[MA35D1_RESET_UART0] =   {0x24, 16},
+	[MA35D1_RESET_UART1] =   {0x24, 17},
+	[MA35D1_RESET_UART2] =   {0x24, 18},
+	[MA35D1_RESET_UART3] =   {0x24, 19},
+	[MA35D1_RESET_UART4] =   {0x24, 20},
+	[MA35D1_RESET_UART5] =   {0x24, 21},
+	[MA35D1_RESET_UART6] =   {0x24, 22},
+	[MA35D1_RESET_UART7] =   {0x24, 23},
+	[MA35D1_RESET_CANFD0] =  {0x24, 24},
+	[MA35D1_RESET_CANFD1] =  {0x24, 25},
+	[MA35D1_RESET_EADC0] =   {0x24, 28},
+	[MA35D1_RESET_I2S0] =    {0x24, 29},
+	[MA35D1_RESET_SC0] =     {0x28, 0},
+	[MA35D1_RESET_SC1] =     {0x28, 1},
+	[MA35D1_RESET_QSPI1] =   {0x28, 4},
+	[MA35D1_RESET_SPI3] =    {0x28, 6},
+	[MA35D1_RESET_EPWM0] =   {0x28, 16},
+	[MA35D1_RESET_EPWM1] =   {0x28, 17},
+	[MA35D1_RESET_QEI0] =    {0x28, 22},
+	[MA35D1_RESET_QEI1] =    {0x28, 23},
+	[MA35D1_RESET_ECAP0] =   {0x28, 26},
+	[MA35D1_RESET_ECAP1] =   {0x28, 27},
+	[MA35D1_RESET_CANFD2] =  {0x28, 28},
+	[MA35D1_RESET_ADC0] =    {0x28, 31},
+	[MA35D1_RESET_TMR4] =    {0x2C, 0},
+	[MA35D1_RESET_TMR5] =    {0x2C, 1},
+	[MA35D1_RESET_TMR6] =    {0x2C, 2},
+	[MA35D1_RESET_TMR7] =    {0x2C, 3},
+	[MA35D1_RESET_TMR8] =    {0x2C, 4},
+	[MA35D1_RESET_TMR9] =    {0x2C, 5},
+	[MA35D1_RESET_TMR10] =   {0x2C, 6},
+	[MA35D1_RESET_TMR11] =   {0x2C, 7},
+	[MA35D1_RESET_UART8] =   {0x2C, 8},
+	[MA35D1_RESET_UART9] =   {0x2C, 9},
+	[MA35D1_RESET_UART10] =  {0x2C, 10},
+	[MA35D1_RESET_UART11] =  {0x2C, 11},
+	[MA35D1_RESET_UART12] =  {0x2C, 12},
+	[MA35D1_RESET_UART13] =  {0x2C, 13},
+	[MA35D1_RESET_UART14] =  {0x2C, 14},
+	[MA35D1_RESET_UART15] =  {0x2C, 15},
+	[MA35D1_RESET_UART16] =  {0x2C, 16},
+	[MA35D1_RESET_I2S1] =    {0x2C, 17},
+	[MA35D1_RESET_I2C4] =    {0x2C, 18},
+	[MA35D1_RESET_I2C5] =    {0x2C, 19},
+	[MA35D1_RESET_EPWM2] =   {0x2C, 20},
+	[MA35D1_RESET_ECAP2] =   {0x2C, 21},
+	[MA35D1_RESET_QEI2] =    {0x2C, 22},
+	[MA35D1_RESET_CANFD3] =  {0x2C, 23},
+	[MA35D1_RESET_KPI] =     {0x2C, 24},
+	[MA35D1_RESET_GIC] =     {0x2C, 28},
+	[MA35D1_RESET_SSMCC] =   {0x2C, 30},
+	[MA35D1_RESET_SSPCC] =   {0x2C, 31}
+};
+
+static int ma35d1_restart_handler(struct notifier_block *this, unsigned long mode, void *cmd)
+{
+	struct ma35d1_reset_data *data =
+				 container_of(this, struct ma35d1_reset_data, restart_handler);
+	u32 id = MA35D1_RESET_CHIP;
+
+	writel_relaxed(BIT(ma35d1_reset_map[id].bit),
+		       data->base + ma35d1_reset_map[id].reg_ofs);
+	return 0;
+}
+
+static int ma35d1_reset_update(struct reset_controller_dev *rcdev, unsigned long id, bool assert)
+{
+	struct ma35d1_reset_data *data = container_of(rcdev, struct ma35d1_reset_data, rcdev);
+	unsigned long flags;
+	u32 reg;
+
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(ma35d1_reset_map)))
+		return -EINVAL;
+
+	spin_lock_irqsave(&data->lock, flags);
+	reg = readl_relaxed(data->base + ma35d1_reset_map[id].reg_ofs);
+	if (assert)
+		reg |= BIT(ma35d1_reset_map[id].bit);
+	else
+		reg &= ~(BIT(ma35d1_reset_map[id].bit));
+	writel_relaxed(reg, data->base + ma35d1_reset_map[id].reg_ofs);
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	return 0;
+}
+
+static int ma35d1_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return ma35d1_reset_update(rcdev, id, true);
+}
+
+static int ma35d1_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	return ma35d1_reset_update(rcdev, id, false);
+}
+
+static int ma35d1_reset_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ma35d1_reset_data *data = container_of(rcdev, struct ma35d1_reset_data, rcdev);
+	u32 reg;
+
+	if (WARN_ON_ONCE(id >= ARRAY_SIZE(ma35d1_reset_map)))
+		return -EINVAL;
+
+	reg = readl_relaxed(data->base + ma35d1_reset_map[id].reg_ofs);
+	return !!(reg & BIT(ma35d1_reset_map[id].bit));
+}
+
+static const struct reset_control_ops ma35d1_reset_ops = {
+	.assert = ma35d1_reset_assert,
+	.deassert = ma35d1_reset_deassert,
+	.status = ma35d1_reset_status,
+};
+
+static const struct of_device_id ma35d1_reset_dt_ids[] = {
+	{ .compatible = "nuvoton,ma35d1-reset" },
+	{ },
+};
+
+static int ma35d1_reset_probe(struct platform_device *pdev)
+{
+	struct ma35d1_reset_data *reset_data;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "Device tree node not found\n");
+		return -EINVAL;
+	}
+
+	reset_data = devm_kzalloc(dev, sizeof(*reset_data), GFP_KERNEL);
+	if (!reset_data)
+		return -ENOMEM;
+
+	reset_data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reset_data->base))
+		return PTR_ERR(reset_data->base);
+
+	reset_data->rcdev.owner = THIS_MODULE;
+	reset_data->rcdev.nr_resets = MA35D1_RESET_COUNT;
+	reset_data->rcdev.ops = &ma35d1_reset_ops;
+	reset_data->rcdev.of_node = dev->of_node;
+	reset_data->restart_handler.notifier_call = ma35d1_restart_handler;
+	reset_data->restart_handler.priority = 192;
+	spin_lock_init(&reset_data->lock);
+
+	err = register_restart_handler(&reset_data->restart_handler);
+	if (err)
+		dev_warn(&pdev->dev, "failed to register restart handler\n");
+
+	return devm_reset_controller_register(dev, &reset_data->rcdev);
+}
+
+static struct platform_driver ma35d1_reset_driver = {
+	.probe = ma35d1_reset_probe,
+	.driver = {
+		.name = "ma35d1-reset",
+		.of_match_table	= ma35d1_reset_dt_ids,
+	},
+};
+
+builtin_platform_driver(ma35d1_reset_driver);

include/dt-bindings/clock/nuvoton,ma35d1-clk.h

+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Nuvoton Technologies.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NUVOTON_MA35D1_CLK_H
+#define __DT_BINDINGS_CLOCK_NUVOTON_MA35D1_CLK_H
+
+/* external and internal oscillator clocks */
+#define HXT		0
+#define HXT_GATE	1
+#define LXT		2
+#define LXT_GATE	3
+#define HIRC		4
+#define HIRC_GATE	5
+#define LIRC		6
+#define LIRC_GATE	7
+/* PLLs */
+#define CAPLL		8
+#define SYSPLL		9
+#define DDRPLL		10
+#define APLL		11
+#define EPLL		12
+#define VPLL		13
+/* EPLL divider */
+#define EPLL_DIV2	14
+#define EPLL_DIV4	15
+#define EPLL_DIV8	16
+/* CPU clock, system clock, AXI, HCLK and PCLK */
+#define CA35CLK_MUX	17
+#define AXICLK_DIV2	18
+#define AXICLK_DIV4	19
+#define AXICLK_MUX	20
+#define SYSCLK0_MUX	21
+#define SYSCLK1_MUX	22
+#define SYSCLK1_DIV2	23
+#define HCLK0		24
+#define HCLK1		25
+#define HCLK2		26
+#define PCLK0		27
+#define PCLK1		28
+#define PCLK2		29
+#define HCLK3		30
+#define PCLK3		31
+#define PCLK4		32
+/* AXI and AHB peripheral clocks */
+#define USBPHY0		33
+#define USBPHY1		34
+#define DDR0_GATE	35
+#define DDR6_GATE	36
+#define CAN0_MUX	37
+#define CAN0_DIV	38
+#define CAN0_GATE	39
+#define CAN1_MUX	40
+#define CAN1_DIV	41
+#define CAN1_GATE	42
+#define CAN2_MUX	43
+#define CAN2_DIV	44
+#define CAN2_GATE	45
+#define CAN3_MUX	46
+#define CAN3_DIV	47
+#define CAN3_GATE	48
+#define SDH0_MUX	49
+#define SDH0_GATE	50
+#define SDH1_MUX	51
+#define SDH1_GATE	52
+#define NAND_GATE	53
+#define USBD_GATE	54
+#define USBH_GATE	55
+#define HUSBH0_GATE	56
+#define HUSBH1_GATE	57
+#define GFX_MUX		58
+#define GFX_GATE	59
+#define VC8K_GATE	60
+#define DCU_MUX		61
+#define DCU_GATE	62
+#define DCUP_DIV	63
+#define EMAC0_GATE	64
+#define EMAC1_GATE	65
+#define CCAP0_MUX	66
+#define CCAP0_DIV	67
+#define CCAP0_GATE	68
+#define CCAP1_MUX	69
+#define CCAP1_DIV	70
+#define CCAP1_GATE	71
+#define PDMA0_GATE	72
+#define PDMA1_GATE	73
+#define PDMA2_GATE	74
+#define PDMA3_GATE	75
+#define WH0_GATE	76
+#define WH1_GATE	77
+#define HWS_GATE	78
+#define EBI_GATE	79
+#define SRAM0_GATE	80
+#define SRAM1_GATE	81
+#define ROM_GATE	82
+#define TRA_GATE	83
+#define DBG_MUX		84
+#define DBG_GATE	85
+#define CKO_MUX		86
+#define CKO_DIV		87
+#define CKO_GATE	88
+#define GTMR_GATE	89
+#define GPA_GATE	90
+#define GPB_GATE	91
+#define GPC_GATE	92
+#define GPD_GATE	93
+#define GPE_GATE	94
+#define GPF_GATE	95
+#define GPG_GATE	96
+#define GPH_GATE	97
+#define GPI_GATE	98
+#define GPJ_GATE	99
+#define GPK_GATE	100
+#define GPL_GATE	101
+#define GPM_GATE	102
+#define GPN_GATE	103
+/* APB peripheral clocks */
+#define TMR0_MUX	104
+#define TMR0_GATE	105
+#define TMR1_MUX	106
+#define TMR1_GATE	107
+#define TMR2_MUX	108
+#define TMR2_GATE	109
+#define TMR3_MUX	110
+#define TMR3_GATE	111
+#define TMR4_MUX	112
+#define TMR4_GATE	113
+#define TMR5_MUX	114
+#define TMR5_GATE	115
+#define TMR6_MUX	116
+#define TMR6_GATE	117
+#define TMR7_MUX	118
+#define TMR7_GATE	119
+#define TMR8_MUX	120
+#define TMR8_GATE	121
+#define TMR9_MUX	122
+#define TMR9_GATE	123
+#define TMR10_MUX	124
+#define TMR10_GATE	125
+#define TMR11_MUX	126
+#define TMR11_GATE	127
+#define UART0_MUX	128
+#define UART0_DIV	129
+#define UART0_GATE	130
+#define UART1_MUX	131
+#define UART1_DIV	132
+#define UART1_GATE	133
+#define UART2_MUX	134
+#define UART2_DIV	135
+#define UART2_GATE	136
+#define UART3_MUX	137
+#define UART3_DIV	138
+#define UART3_GATE	139
+#define UART4_MUX	140
+#define UART4_DIV	141
+#define UART4_GATE	142
+#define UART5_MUX	143
+#define UART5_DIV	144
+#define UART5_GATE	145
+#define UART6_MUX	146
+#define UART6_DIV	147
+#define UART6_GATE	148
+#define UART7_MUX	149
+#define UART7_DIV	150
+#define UART7_GATE	151
+#define UART8_MUX	152
+#define UART8_DIV	153
+#define UART8_GATE	154
+#define UART9_MUX	155
+#define UART9_DIV	156
+#define UART9_GATE	157
+#define UART10_MUX	158
+#define UART10_DIV	159
+#define UART10_GATE	160
+#define UART11_MUX	161
+#define UART11_DIV	162
+#define UART11_GATE	163
+#define UART12_MUX	164
+#define UART12_DIV	165
+#define UART12_GATE	166
+#define UART13_MUX	167
+#define UART13_DIV	168
+#define UART13_GATE	169
+#define UART14_MUX	170
+#define UART14_DIV	171
+#define UART14_GATE	172
+#define UART15_MUX	173
+#define UART15_DIV	174
+#define UART15_GATE	175
+#define UART16_MUX	176
+#define UART16_DIV	177
+#define UART16_GATE	178
+#define RTC_GATE	179
+#define DDR_GATE	180
+#define KPI_MUX		181
+#define KPI_DIV		182
+#define KPI_GATE	183
+#define I2C0_GATE	184
+#define I2C1_GATE	185
+#define I2C2_GATE	186
+#define I2C3_GATE	187
+#define I2C4_GATE	188
+#define I2C5_GATE	189
+#define QSPI0_MUX	190
+#define QSPI0_GATE	191
+#define QSPI1_MUX	192
+#define QSPI1_GATE	193
+#define SMC0_MUX	194
+#define SMC0_DIV	195
+#define SMC0_GATE	196
+#define SMC1_MUX	197
+#define SMC1_DIV	198
+#define SMC1_GATE	199
+#define WDT0_MUX	200
+#define WDT0_GATE	201
+#define WDT1_MUX	202
+#define WDT1_GATE	203
+#define WDT2_MUX	204
+#define WDT2_GATE	205
+#define WWDT0_MUX	206
+#define WWDT1_MUX	207
+#define WWDT2_MUX	208
+#define EPWM0_GATE	209
+#define EPWM1_GATE	210
+#define EPWM2_GATE	211
+#define I2S0_MUX	212
+#define I2S0_GATE	213
+#define I2S1_MUX	214
+#define I2S1_GATE	215
+#define SSMCC_GATE	216
+#define SSPCC_GATE	217
+#define SPI0_MUX	218
+#define SPI0_GATE	219
+#define SPI1_MUX	220
+#define SPI1_GATE	221
+#define SPI2_MUX	222
+#define SPI2_GATE	223
+#define SPI3_MUX	224
+#define SPI3_GATE	225
+#define ECAP0_GATE	226
+#define ECAP1_GATE	227
+#define ECAP2_GATE	228
+#define QEI0_GATE	229
+#define QEI1_GATE	230
+#define QEI2_GATE	231
+#define ADC_DIV		232
+#define ADC_GATE	233
+#define EADC_DIV	234
+#define EADC_GATE	235
+#define	CLK_MAX_IDX	236
+
+#endif /* __DT_BINDINGS_CLOCK_NUVOTON_MA35D1_CLK_H */

include/dt-bindings/pinctrl/stm32-pinfunc.h

@@ -37,6 +37,9 @@
 #define STM32MP_PKG_AB	0x2
 #define STM32MP_PKG_AC	0x4
 #define STM32MP_PKG_AD	0x8
+#define STM32MP_PKG_AI	0x100
+#define STM32MP_PKG_AK	0x400
+#define STM32MP_PKG_AL	0x800
 
 #endif /* _DT_BINDINGS_STM32_PINFUNC_H */
 

include/dt-bindings/reset/nuvoton,ma35d1-reset.h

+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2023 Nuvoton Technologies.
+ * Author: Chi-Fen Li <cfli0@nuvoton.com>
+ *
+ * Device Tree binding constants for MA35D1 reset controller.
+ */
+
+#ifndef __DT_BINDINGS_RESET_MA35D1_H
+#define __DT_BINDINGS_RESET_MA35D1_H
+
+#define MA35D1_RESET_CHIP	0
+#define MA35D1_RESET_CA35CR0	1
+#define MA35D1_RESET_CA35CR1	2
+#define MA35D1_RESET_CM4	3
+#define MA35D1_RESET_PDMA0	4
+#define MA35D1_RESET_PDMA1	5
+#define MA35D1_RESET_PDMA2	6
+#define MA35D1_RESET_PDMA3	7
+#define MA35D1_RESET_DISP	8
+#define MA35D1_RESET_VCAP0	9
+#define MA35D1_RESET_VCAP1	10
+#define MA35D1_RESET_GFX	11
+#define MA35D1_RESET_VDEC	12
+#define MA35D1_RESET_WHC0	13
+#define MA35D1_RESET_WHC1	14
+#define MA35D1_RESET_GMAC0	15
+#define MA35D1_RESET_GMAC1	16
+#define MA35D1_RESET_HWSEM	17
+#define MA35D1_RESET_EBI	18
+#define MA35D1_RESET_HSUSBH0	19
+#define MA35D1_RESET_HSUSBH1	20
+#define MA35D1_RESET_HSUSBD	21
+#define MA35D1_RESET_USBHL	22
+#define MA35D1_RESET_SDH0	23
+#define MA35D1_RESET_SDH1	24
+#define MA35D1_RESET_NAND	25
+#define MA35D1_RESET_GPIO	26
+#define MA35D1_RESET_MCTLP	27
+#define MA35D1_RESET_MCTLC	28
+#define MA35D1_RESET_DDRPUB	29
+#define MA35D1_RESET_TMR0	30
+#define MA35D1_RESET_TMR1	31
+#define MA35D1_RESET_TMR2	32
+#define MA35D1_RESET_TMR3	33
+#define MA35D1_RESET_I2C0	34
+#define MA35D1_RESET_I2C1	35
+#define MA35D1_RESET_I2C2	36
+#define MA35D1_RESET_I2C3	37
+#define MA35D1_RESET_QSPI0	38
+#define MA35D1_RESET_SPI0	39
+#define MA35D1_RESET_SPI1	40
+#define MA35D1_RESET_SPI2	41
+#define MA35D1_RESET_UART0	42
+#define MA35D1_RESET_UART1	43
+#define MA35D1_RESET_UART2	44
+#define MA35D1_RESET_UART3	45
+#define MA35D1_RESET_UART4	46
+#define MA35D1_RESET_UART5	47
+#define MA35D1_RESET_UART6	48
+#define MA35D1_RESET_UART7	49
+#define MA35D1_RESET_CANFD0	50
+#define MA35D1_RESET_CANFD1	51
+#define MA35D1_RESET_EADC0	52
+#define MA35D1_RESET_I2S0	53
+#define MA35D1_RESET_SC0	54
+#define MA35D1_RESET_SC1	55
+#define MA35D1_RESET_QSPI1	56
+#define MA35D1_RESET_SPI3	57
+#define MA35D1_RESET_EPWM0	58
+#define MA35D1_RESET_EPWM1	59
+#define MA35D1_RESET_QEI0	60
+#define MA35D1_RESET_QEI1	61
+#define MA35D1_RESET_ECAP0	62
+#define MA35D1_RESET_ECAP1	63
+#define MA35D1_RESET_CANFD2	64
+#define MA35D1_RESET_ADC0	65
+#define MA35D1_RESET_TMR4	66
+#define MA35D1_RESET_TMR5	67
+#define MA35D1_RESET_TMR6	68
+#define MA35D1_RESET_TMR7	69
+#define MA35D1_RESET_TMR8	70
+#define MA35D1_RESET_TMR9	71
+#define MA35D1_RESET_TMR10	72
+#define MA35D1_RESET_TMR11	73
+#define MA35D1_RESET_UART8	74
+#define MA35D1_RESET_UART9	75
+#define MA35D1_RESET_UART10	76
+#define MA35D1_RESET_UART11	77
+#define MA35D1_RESET_UART12	78
+#define MA35D1_RESET_UART13	79
+#define MA35D1_RESET_UART14	80
+#define MA35D1_RESET_UART15	81
+#define MA35D1_RESET_UART16	82
+#define MA35D1_RESET_I2S1	83
+#define MA35D1_RESET_I2C4	84
+#define MA35D1_RESET_I2C5	85
+#define MA35D1_RESET_EPWM2	86
+#define MA35D1_RESET_ECAP2	87
+#define MA35D1_RESET_QEI2	88
+#define MA35D1_RESET_CANFD3	89
+#define MA35D1_RESET_KPI	90
+#define MA35D1_RESET_GIC	91
+#define MA35D1_RESET_SSMCC	92
+#define MA35D1_RESET_SSPCC	93
+#define MA35D1_RESET_COUNT	94
+
+#endif