Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-2.6

drivers/i2c/Kconfig

@@ -20,9 +20,7 @@ config I2C
 	  interfaces", below.
 
 	  If you want I2C support, you should say Y here and also to the
-	  specific driver for your bus adapter(s) below.  If you say Y to
-	  "/proc file system" below, you will then get a /proc interface which
-	  is documented in <file:Documentation/i2c/proc-interface>.
+	  specific driver for your bus adapter(s) below.
 
 	  This I2C support is also available as a module.  If you want to
 	  compile it as a module, say M here and read

drivers/i2c/busses/Kconfig

@@ -108,6 +108,23 @@ config I2C_ISA
 	  in the lm_sensors package, which you can download at 
 	  http://www.lm-sensors.nu
 
+config I2C_NFORCE2
+	tristate "  Nvidia Nforce2"
+	depends on I2C && PCI && EXPERIMENTAL
+	help
+	  If you say yes to this option, support will be included for the Nvidia
+	  Nforce2 family of mainboard I2C interfaces.
+
+	  This can also be built as a module which can be inserted and removed
+	  while the kernel is running.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  The module will be called i2c-nforce2.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at
+	  http://www.lm-sensors.nu
+
 
 config I2C_PIIX4
 	tristate "  Intel PIIX4"

drivers/i2c/busses/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
 obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
+obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
 obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
 obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
 obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o

drivers/i2c/busses/i2c-ali1535.c

@@ -206,12 +206,6 @@ static int ali1535_setup(struct pci_dev *dev)
 	return retval;
 }
 
-static void ali1535_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 static int ali1535_transaction(struct i2c_adapter *adap)
 {
 	int temp;
@@ -283,7 +277,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	/* We will always wait for a fraction of a second! */
 	timeout = 0;
 	do {
-		ali1535_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	} while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE))
 		 && (timeout++ < MAX_TIMEOUT));
@@ -357,7 +351,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr,
 	for (timeout = 0;
 	     (timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE);
 	     timeout++) {
-		ali1535_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	}
 	if (timeout >= MAX_TIMEOUT)

drivers/i2c/busses/i2c-ali15x3.c

@@ -225,13 +225,6 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
 	return -ENODEV;
 }
 
-/* Internally used pause function */
-static void ali15x3_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 /* Another internally used function */
 static int ali15x3_transaction(struct i2c_adapter *adap)
 {
@@ -304,7 +297,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 	/* We will always wait for a fraction of a second! */
 	timeout = 0;
 	do {
-		ali15x3_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	} while ((!(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)))
 		 && (timeout++ < MAX_TIMEOUT));
@@ -361,7 +354,7 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr,
 	for (timeout = 0;
 	     (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE);
 	     timeout++) {
-		ali15x3_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	}
 	if (timeout >= MAX_TIMEOUT) {

drivers/i2c/busses/i2c-amd756.c

@@ -93,14 +93,6 @@ static unsigned short amd756_ioport = 0;
      see E0 for the status bits and enabled in E2
      
 */
-
-/* Internally used pause function */
-static void amd756_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 #define GS_ABRT_STS	(1 << 0)
 #define GS_COL_STS	(1 << 1)
 #define GS_PRERR_STS	(1 << 2)
@@ -132,7 +124,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
 		dev_dbg(&adap->dev, ": SMBus busy (%04x). Waiting... \n", temp);
 		do {
-			amd756_do_pause(1);
+			i2c_delay(1);
 			temp = inw_p(SMB_GLOBAL_STATUS);
 		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
 		         (timeout++ < MAX_TIMEOUT));
@@ -149,7 +141,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
 
 	/* We will always wait for a fraction of a second! */
 	do {
-		amd756_do_pause(1);
+		i2c_delay(1);
 		temp = inw_p(SMB_GLOBAL_STATUS);
 	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
 
@@ -196,7 +188,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
  abort:
 	dev_warn(&adap->dev, ": Sending abort.\n");
 	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
-	amd756_do_pause(100);
+	i2c_delay(100);
 	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
 	return -1;
 }

drivers/i2c/busses/i2c-amd8111.c

@@ -275,8 +275,7 @@ s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
 	}
 
 	if (~temp[0] & AMD_SMB_STS_DONE) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule_timeout(HZ/100);
+		i2c_delay(HZ/100);
 		amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
 	}
 

drivers/i2c/busses/i2c-i801.c

@@ -103,7 +103,6 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the I801 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
-static void i801_do_pause(unsigned int amount);
 static int i801_transaction(void);
 static int i801_block_transaction(union i2c_smbus_data *data,
 				  char read_write, int command);
@@ -178,13 +177,6 @@ static int i801_setup(struct pci_dev *dev)
 	return error_return;
 }
 
-
-static void i801_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 static int i801_transaction(void)
 {
 	int temp;
@@ -214,7 +206,7 @@ static int i801_transaction(void)
 
 	/* We will always wait for a fraction of a second! */
 	do {
-		i801_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
 
@@ -342,7 +334,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		timeout = 0;
 		do {
 			temp = inb_p(SMBHSTSTS);
-			i801_do_pause(1);
+			i2c_delay(1);
 		}
 		    while ((!(temp & 0x80))
 			   && (timeout++ < MAX_TIMEOUT));
@@ -402,7 +394,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		timeout = 0;
 		do {
 			temp = inb_p(SMBHSTSTS);
-			i801_do_pause(1);
+			i2c_delay(1);
 		} while ((!(temp & 0x02))
 			   && (timeout++ < MAX_TIMEOUT));
 

drivers/i2c/busses/i2c-nforce2.c

+/*
+    SMBus driver for nVidia nForce2 MCP
+
+	Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
+    Copyright (c) 2003  Hans-Frieder Vogt <hfvogt@arcor.de>,
+    Based on
+    SMBus 2.0 driver for AMD-8111 IO-Hub
+    Copyright (c) 2002 Vojtech Pavlik
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    SUPPORTED DEVICES	PCI ID
+    nForce2 MCP		0064
+
+    This driver supports the 2 SMBuses that are included in the MCP2 of the
+    nForce2 chipset.
+*/
+
+/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
+MODULE_DESCRIPTION("nForce2 SMBus driver");
+
+
+#ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS   0x0064
+#endif
+/* TODO: sync with lm-sensors */
+#ifndef I2C_HW_SMBUS_NFORCE2
+#define I2C_HW_SMBUS_NFORCE2	0x0c
+#endif
+
+
+struct nforce2_smbus {
+	struct pci_dev *dev;
+	struct i2c_adapter adapter;
+	int base;
+	int size;
+};
+
+
+/*
+ * nVidia nForce2 SMBus control register definitions
+ */
+#define NFORCE_PCI_SMB1	0x50
+#define NFORCE_PCI_SMB2	0x54
+
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+#define NVIDIA_SMB_PRTCL	(smbus->base + 0x00)	/* protocol, PEC */
+#define NVIDIA_SMB_STS		(smbus->base + 0x01)	/* status */
+#define NVIDIA_SMB_ADDR		(smbus->base + 0x02)	/* address */
+#define NVIDIA_SMB_CMD		(smbus->base + 0x03)	/* command */
+#define NVIDIA_SMB_DATA		(smbus->base + 0x04)	/* 32 data registers */
+#define NVIDIA_SMB_BCNT		(smbus->base + 0x24)	/* number of data bytes */
+#define NVIDIA_SMB_ALRM_A	(smbus->base + 0x25)	/* alarm address */
+#define NVIDIA_SMB_ALRM_D	(smbus->base + 0x26)	/* 2 bytes alarm data */
+
+#define NVIDIA_SMB_STS_DONE	0x80
+#define NVIDIA_SMB_STS_ALRM	0x40
+#define NVIDIA_SMB_STS_RES	0x20
+#define NVIDIA_SMB_STS_STATUS	0x1f
+
+#define NVIDIA_SMB_PRTCL_WRITE			0x00
+#define NVIDIA_SMB_PRTCL_READ			0x01
+#define NVIDIA_SMB_PRTCL_QUICK			0x02
+#define NVIDIA_SMB_PRTCL_BYTE			0x04
+#define NVIDIA_SMB_PRTCL_BYTE_DATA		0x06
+#define NVIDIA_SMB_PRTCL_WORD_DATA		0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA		0x0a
+#define NVIDIA_SMB_PRTCL_PROC_CALL		0x0c
+#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL	0x0d
+#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA		0x4a
+#define NVIDIA_SMB_PRTCL_PEC			0x80
+
+
+/* Other settings */
+#define MAX_TIMEOUT 256
+
+
+
+static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
+		       unsigned short flags, char read_write,
+		       u8 command, int size, union i2c_smbus_data *data);
+static u32 nforce2_func(struct i2c_adapter *adapter);
+
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name = "Non-I2C SMBus adapter",
+	.id = I2C_ALGO_SMBUS,
+	.smbus_xfer = nforce2_access,
+	.functionality = nforce2_func,
+};
+
+static struct i2c_adapter nforce2_adapter = {
+	.owner          = THIS_MODULE,
+	.id             = I2C_ALGO_SMBUS | I2C_HW_SMBUS_NFORCE2,
+	.class          = I2C_ADAP_CLASS_SMBUS,
+	.algo           = &smbus_algorithm,
+	.dev            = {
+		.name   = "unset",
+	},
+};
+
+
+#if 0
+/* Internally used pause function */
+static void nforce2_do_pause(unsigned int amount)
+{
+	current->state = TASK_INTERRUPTIBLE;
+	schedule_timeout(amount);
+}
+#endif
+
+/* Return -1 on error. See smbus.h for more information */
+static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
+		char read_write, u8 command, int size,
+		union i2c_smbus_data * data)
+{
+	struct nforce2_smbus *smbus = adap->algo_data;
+	unsigned char protocol, pec, temp;
+	unsigned char len = 0; /* to keep the compiler quiet */
+	int timeout = 0;
+	int i;
+
+	protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
+		NVIDIA_SMB_PRTCL_WRITE;
+	pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_QUICK:
+			protocol |= NVIDIA_SMB_PRTCL_QUICK;
+			read_write = I2C_SMBUS_WRITE;
+			break;
+
+		case I2C_SMBUS_BYTE:
+			if (read_write == I2C_SMBUS_WRITE)
+				outb_p(data->byte, NVIDIA_SMB_DATA);
+			protocol |= NVIDIA_SMB_PRTCL_BYTE;
+			break;
+
+		case I2C_SMBUS_BYTE_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE)
+				outb_p(data->byte, NVIDIA_SMB_DATA);
+			protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA;
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE) {
+				 outb_p(data->word, NVIDIA_SMB_DATA);
+				 outb_p(data->word >> 8, NVIDIA_SMB_DATA+1);
+			}
+			protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE) {
+				len = min_t(u8, data->block[0], 32);
+				outb_p(len, NVIDIA_SMB_BCNT);
+				for (i = 0; i < len; i++)
+					outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+			}
+			protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+			break;
+
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			len = min_t(u8, data->block[0], 32);
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(len, NVIDIA_SMB_BCNT);
+			if (read_write == I2C_SMBUS_WRITE)
+				for (i = 0; i < len; i++)
+					outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+			protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
+			break;
+
+		case I2C_SMBUS_PROC_CALL:
+			dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+			return -1;
+			/*
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(data->word, NVIDIA_SMB_DATA);
+			outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
+			protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+			 */
+
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
+			return -1;
+			/*
+			protocol |= pec;
+			len = min_t(u8, data->block[0], 31);
+			outb_p(command, NVIDIA_SMB_CMD);
+			outb_p(len, NVIDIA_SMB_BCNT);
+			for (i = 0; i < len; i++)
+				outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
+			protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+			read_write = I2C_SMBUS_READ;
+			break;
+			*/
+
+		case I2C_SMBUS_WORD_DATA_PEC:
+		case I2C_SMBUS_BLOCK_DATA_PEC:
+		case I2C_SMBUS_PROC_CALL_PEC:
+		case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+			dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
+			return -1;
+
+		default:
+			dev_err(&adap->dev, "Unsupported transaction %d\n", size);
+			return -1;
+	}
+
+	outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
+	outb_p(protocol, NVIDIA_SMB_PRTCL);
+
+	temp = inb_p(NVIDIA_SMB_STS);
+
+#if 0
+	do {
+		nforce2_do_pause(1);
+		temp = inb_p(NVIDIA_SMB_STS);
+	} while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));
+#endif
+	if (~temp & NVIDIA_SMB_STS_DONE) {
+		udelay(500);
+		temp = inb_p(NVIDIA_SMB_STS);
+	}
+	if (~temp & NVIDIA_SMB_STS_DONE) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(HZ/100);
+		temp = inb_p(NVIDIA_SMB_STS);
+	}
+
+	if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
+		|| (temp & NVIDIA_SMB_STS_STATUS))
+		return -1;
+
+	if (read_write == I2C_SMBUS_WRITE)
+		return 0;
+
+	switch (size) {
+
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = inb_p(NVIDIA_SMB_DATA);
+			break;
+
+		case I2C_SMBUS_WORD_DATA:
+		/* case I2C_SMBUS_PROC_CALL: not supported */
+			data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
+			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+		/* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
+			len = inb_p(NVIDIA_SMB_BCNT);
+			len = min_t(u8, len, 32);
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < len; i++)
+				data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+			data->block[0] = len;
+			break;
+	}
+
+	return 0;
+}
+
+
+static u32 nforce2_func(struct i2c_adapter *adapter)
+{
+	/* other functionality might be possible, but is not tested */
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
+	    I2C_FUNC_SMBUS_BLOCK_DATA */;
+}
+
+
+static struct pci_device_id nforce2_ids[] = {
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS,
+	       	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0 }
+};
+
+
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
+	struct nforce2_smbus *smbus, char *name)
+{
+	u16 iobase;
+	int error;
+
+	if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
+		dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
+		return -1;
+	}
+	smbus->dev  = dev;
+	smbus->base = iobase & 0xfffc;
+	smbus->size = 8;
+
+	if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
+			smbus->base, smbus->base+smbus->size-1, name);
+		return -1;
+	}
+/*
+	smbus->adapter.owner = THIS_MODULE;
+	smbus->adapter.id = I2C_ALGO_SMBUS | I2C_HW_SMBUS_NFORCE2;
+	smbus->adapter.algo = &smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+*/
+	smbus->adapter = nforce2_adapter;
+	smbus->adapter.dev.parent = &dev->dev;
+	snprintf(smbus->adapter.dev.name, DEVICE_NAME_SIZE,
+		"SMBus nForce2 adapter at %04x", smbus->base);
+
+	error = i2c_add_adapter(&smbus->adapter);
+	if (error) {
+		dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
+		release_region(smbus->base, smbus->size);
+		return -1;
+	}
+	dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
+	return 0;
+}
+
+
+static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct nforce2_smbus *smbuses;
+	int res1, res2;
+
+	/* we support 2 SMBus adapters */
+	if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
+				       	GFP_KERNEL)))
+		return -ENOMEM;
+	memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
+	pci_set_drvdata(dev, smbuses);
+
+	/* SMBus adapter 1 */
+	res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+	if (res1 < 0) {
+		dev_err(&dev->dev, "Error probing SMB1.\n");
+		smbuses[0].base = 0;	/* to have a check value */
+	}
+	res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+	if (res2 < 0) {
+		dev_err(&dev->dev, "Error probing SMB2.\n");
+		smbuses[1].base = 0;	/* to have a check value */
+	}
+	if ((res1 < 0) && (res2 < 0)) {
+		/* we did not find even one of the SMBuses, so we give up */
+		kfree(smbuses);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static void __devexit nforce2_remove(struct pci_dev *dev)
+{
+	struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
+
+	if (smbuses[0].base) {
+		i2c_del_adapter(&smbuses[0].adapter);
+		release_region(smbuses[0].base, smbuses[0].size);
+	}
+	if (smbuses[1].base) {
+		i2c_del_adapter(&smbuses[1].adapter);
+		release_region(smbuses[1].base, smbuses[1].size);
+	}
+	kfree(smbuses);
+}
+
+static struct pci_driver nforce2_driver = {
+	.name		= "nForce2 SMBus",
+	.id_table	= nforce2_ids,
+	.probe		= nforce2_probe,
+	.remove		= __devexit_p(nforce2_remove),
+};
+
+static int __init nforce2_init(void)
+{
+	return pci_module_init(&nforce2_driver);
+}
+
+static void __exit nforce2_exit(void)
+{
+	pci_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+

drivers/i2c/busses/i2c-piix4.c

@@ -99,7 +99,6 @@ MODULE_PARM_DESC(force_addr,
 		 "Forcibly enable the PIIX4 at the given address. "
 		 "EXTREMELY DANGEROUS!");
 
-static void piix4_do_pause(unsigned int amount);
 static int piix4_transaction(void);
 
 
@@ -208,13 +207,6 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id
 	return error_return;
 }
 
-/* Internally used pause function */
-static void piix4_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 /* Another internally used function */
 static int piix4_transaction(void)
 {
@@ -245,7 +237,7 @@ static int piix4_transaction(void)
 
 	/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
 	do {
-		piix4_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
 

drivers/i2c/busses/i2c-sis96x.c

@@ -99,13 +99,6 @@ static inline void sis96x_write(u8 reg, u8 data)
 	outb(data, sis96x_smbus_base + reg) ;
 }
 
-/* Internally used pause function */
-static void sis96x_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 /* Execute a SMBus transaction.
    int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA
  */
@@ -147,7 +140,7 @@ static int sis96x_transaction(int size)
 
 	/* We will always wait for a fraction of a second! */
 	do {
-		sis96x_do_pause(1);
+		i2c_delay(1);
 		temp = sis96x_read(SMB_STS);
 	} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
 

drivers/i2c/busses/i2c-viapro.c

@@ -103,13 +103,6 @@ MODULE_PARM_DESC(force_addr,
 
 static struct i2c_adapter vt596_adapter;
 
-/* Internally used pause function */
-static void vt596_do_pause(unsigned int amount)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(amount);
-}
-
 /* Another internally used function */
 static int vt596_transaction(void)
 {
@@ -143,7 +136,7 @@ static int vt596_transaction(void)
 	/* We will always wait for a fraction of a second! 
 	   I don't know if VIA needs this, Intel did  */
 	do {
-		vt596_do_pause(1);
+		i2c_delay(1);
 		temp = inb_p(SMBHSTSTS);
 	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
 

drivers/i2c/chips/via686a.c

@@ -494,27 +494,27 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
-	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*10 );
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 );
 }
 /* more like overshoot temperature */
 static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
-	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*10);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100);
 }
 /* more like hysteresis temperature */
 static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
 	via686a_update_client(client);
-	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*10);
+	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100);
 }
 static ssize_t set_temp_max(struct device *dev, const char *buf, 
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
-	int val = simple_strtol(buf, NULL, 10)/10;
+	int val = simple_strtol(buf, NULL, 10)/100;
 	data->temp_over[nr] = TEMP_TO_REG(val);
 	via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
 	return count;
@@ -523,7 +523,7 @@ static ssize_t set_temp_min(struct device *dev, const char *buf,
 		size_t count, int nr) {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct via686a_data *data = i2c_get_clientdata(client);
-	int val = simple_strtol(buf, NULL, 10)/10;
+	int val = simple_strtol(buf, NULL, 10)/100;
 	data->temp_hyst[nr] = TEMP_TO_REG(val);
 	via686a_write_value(client, VIA686A_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
 	return count;

drivers/i2c/i2c-keywest.c

@@ -66,8 +66,6 @@
 
 #include "i2c-keywest.h"
 
-#undef POLLED_MODE
-
 #define DBG(x...) do {\
 	if (debug > 0) \
 		printk(KERN_DEBUG "KW:" x); \
@@ -85,27 +83,6 @@ int debug = 0;
 
 static struct keywest_iface *ifaces = NULL;
 
-#ifdef POLLED_MODE
-/* This isn't fast, but will go once I implement interrupt with
- * proper timeout
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
-	int i;
-	u8 isr;
-	
-	for (i = 0; i < POLL_TIMEOUT; i++) {
-		isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
-		if (isr != 0)
-			return isr;
-		current->state = TASK_UNINTERRUPTIBLE;
-		schedule_timeout(1);
-	}
-	return isr;
-}
-#endif /* POLLED_MODE */
-
 
 static void
 do_stop(struct keywest_iface* iface, int result)
@@ -116,16 +93,17 @@ do_stop(struct keywest_iface* iface, int result)
 }
 
 /* Main state machine for standard & standard sub mode */
-static void
+static int
 handle_interrupt(struct keywest_iface *iface, u8 isr)
 {
 	int ack;
+	int rearm_timer = 1;
 	
 	DBG("handle_interrupt(), got: %x, status: %x, state: %d\n",
 		isr, read_reg(reg_status), iface->state);
 	if (isr == 0 && iface->state != state_stop) {
 		do_stop(iface, -1);
-		return;
+		return rearm_timer;
 	}
 	if (isr & KW_I2C_IRQ_STOP && iface->state != state_stop) {
 		iface->result = -1;
@@ -196,20 +174,19 @@ handle_interrupt(struct keywest_iface *iface, u8 isr)
 		if (!(isr & KW_I2C_IRQ_STOP) && (++iface->stopretry) < 10)
 			do_stop(iface, -1);
 		else {
+			rearm_timer = 0;
 			iface->state = state_idle;
 			write_reg(reg_control, 0x00);
 			write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
 			complete(&iface->complete);
-#endif /* POLLED_MODE */			
 		}
 		break;
 	}
 	
 	write_reg(reg_isr, isr);
-}
 
-#ifndef POLLED_MODE
+	return rearm_timer;
+}
 
 /* Interrupt handler */
 static irqreturn_t
@@ -219,11 +196,8 @@ keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
 
 	spin_lock(&iface->lock);
 	del_timer(&iface->timeout_timer);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
+	if (handle_interrupt(iface, read_reg(reg_isr)))
+		mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
 	spin_unlock(&iface->lock);
 	return IRQ_HANDLED;
 }
@@ -235,16 +209,11 @@ keywest_timeout(unsigned long data)
 
 	DBG("timeout !\n");
 	spin_lock_irq(&iface->lock);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
+	if (handle_interrupt(iface, read_reg(reg_isr)))
+		mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
 	spin_unlock(&iface->lock);
 }
 
-#endif /* POLLED_MODE */
-
 /*
  * SMBUS-type transfer entrypoint
  */
@@ -331,24 +300,13 @@ keywest_smbus_xfer(	struct i2c_adapter*	adap,
 		write_reg(reg_subaddr, command);
 
 	/* Arm timeout */
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
+	mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
 
 	/* Start sending address & enable interrupt*/
 	write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
 	write_reg(reg_ier, KW_I2C_IRQ_MASK);
 
-#ifdef POLLED_MODE
-	DBG("using polled mode...\n");
-	/* State machine, to turn into an interrupt handler */
-	while(iface->state != state_idle) {
-		u8 isr = wait_interrupt(iface);
-		handle_interrupt(iface, isr);
-	}
-#else /* POLLED_MODE */
-	DBG("using interrupt mode...\n");
 	wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
 
 	rc = iface->result;	
 	DBG("transfer done, result: %d\n", rc);
@@ -421,24 +379,13 @@ keywest_xfer(	struct i2c_adapter *adap,
 			((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
 
 		/* Arm timeout */
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
+		mod_timer(&iface->timeout_timer, jiffies + POLL_TIMEOUT);
 
 		/* Start sending address & enable interrupt*/
 		write_reg(reg_control, read_reg(reg_control) | KW_I2C_CTL_XADDR);
 		write_reg(reg_ier, KW_I2C_IRQ_MASK);
 
-#ifdef POLLED_MODE
-		DBG("using polled mode...\n");
-		/* State machine, to turn into an interrupt handler */
-		while(iface->state != state_idle) {
-			u8 isr = wait_interrupt(iface);
-			handle_interrupt(iface, isr);
-		}
-#else /* POLLED_MODE */
-		DBG("using interrupt mode...\n");
 		wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
 
 		rc = iface->result;
 		if (rc == 0)
@@ -540,8 +487,8 @@ create_iface(struct device_node* np)
 			*prate);
 	}
 	
-	/* Select standard sub mode */
-	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
+	/* Select standard mode by default */
+	iface->cur_mode |= KW_I2C_MODE_STANDARD;
 	
 	/* Write mode */
 	write_reg(reg_mode, iface->cur_mode);
@@ -550,7 +497,6 @@ create_iface(struct device_node* np)
 	write_reg(reg_ier, 0x00);
 	write_reg(reg_isr, KW_I2C_IRQ_MASK);
 
-#ifndef POLLED_MODE
 	/* Request chip interrupt */	
 	rc = request_irq(iface->irq, keywest_irq, 0, "keywest i2c", iface);
 	if (rc) {
@@ -559,7 +505,6 @@ create_iface(struct device_node* np)
 		kfree(iface);
 		return -ENODEV;
 	}
-#endif /* POLLED_MODE */
 
 	for (i=0; i<nchan; i++) {
 		struct keywest_chan* chan = &iface->channels[i];
@@ -609,19 +554,16 @@ dispose_iface(struct keywest_iface *iface)
 
 	/* Make sure we stop all activity */
 	down(&iface->sem);
-#ifndef POLLED_MODE
 	spin_lock_irq(&iface->lock);
 	while (iface->state != state_idle) {
 		spin_unlock_irq(&iface->lock);
-		schedule();
+		set_task_state(current,TASK_UNINTERRUPTIBLE);
+		schedule_timeout(HZ/10);
 		spin_lock_irq(&iface->lock);
 	}
-#endif /* POLLED_MODE */
 	iface->state = state_dead;
-#ifndef POLLED_MODE
 	spin_unlock_irq(&iface->lock);
 	free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
 	up(&iface->sem);
 
 	/* Release all channels */

include/linux/i2c.h

@@ -594,4 +594,11 @@ union i2c_smbus_data {
 #define i2c_is_isa_adapter(adapptr) \
         ((adapptr)->algo->id == I2C_ALGO_ISA)
 
+/* Tiny delay function used by the i2c bus drivers */
+static inline void i2c_delay(signed long timeout)
+{
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(timeout);
+}
+
 #endif /* _LINUX_I2C_H */