[media] HDIC HD29L2 DMB-TH USB2.0 reference design driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/Kconfig

@@ -361,6 +361,13 @@ config DVB_USB_EC168
 	help
 	  Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
 
+config DVB_USB_HDIC
+	tristate "HDIC HD29L2 reference design"
+	depends on DVB_USB
+	select DVB_HD29L2 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the HDIC HD29L2 reference design.
+
 config DVB_USB_AZ6027
 	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
 	depends on DVB_USB

drivers/media/dvb/dvb-usb/Makefile

@@ -88,6 +88,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
 dvb-usb-ec168-objs = ec168.o
 obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
 
+dvb-usb-hdic-objs = hdic.o
+obj-$(CONFIG_DVB_USB_HDIC) += dvb-usb-hdic.o
+
 dvb-usb-az6027-objs = az6027.o
 obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o
 

drivers/media/dvb/dvb-usb/hdic.c

+/*
+ * DVB USB Linux driver for the HDIC receiver
+ *
+ * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D
+ *
+ * Author: Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "hdic.h"
+#include "hd29l2.h"
+#include "mxl5007t.h"
+
+/* debug */
+static int dvb_usb_hdic_debug;
+module_param_named(debug, dvb_usb_hdic_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+/*
+ * I2C addresses (7bit) found by probing I2C bus:
+ * 0x48 ??
+ * 0x51 eeprom
+ * 0x60 MaxLinear MXL5007T tuner
+ * 0x73 HDIC HD29L2 demod
+ *
+ * Xtals:
+ * 24.000 MHz Cypress CY7C68013A-56 (FX2)
+ * 30.400 MHz HDIC HD29L2
+ * 24.000 MHz MaxLinear MXL5007T
+ *
+ * I/Os:
+ * RDY1 / SLWR == TS_CLK (USB_SLWR = !TS_CLK&TS_VALID)
+ * PA1 / INT1  == 29L1_RESET RST_N
+ */
+
+/*
+ * See Qanu DVB-T USB2.0 communication protocol specification for more
+ * information used USB API.
+ */
+
+/* I2C */
+static int hdic_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+	int num)
+{
+	int ret;
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	u8 buf[64];
+
+	/*
+	 * increase sleep when there is a lot of errors:
+	 * dvb-usb: recv bulk message failed: -110
+	 */
+#define HDIC_I2C_SLEEP 1
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+		(msg[1].flags & I2C_M_RD)) {
+		/* I2C write + read combination (typical register read) */
+		buf[0] = HDIC_CMD_I2C;
+		buf[1] = (msg[0].addr << 1); /* I2C write */
+		buf[2] = msg[0].len;
+		buf[3] = 1; /* no I2C stop => repeated start */
+		memcpy(&buf[4], msg[0].buf, msg[0].len);
+		ret = dvb_usb_generic_rw(d, buf, 4+msg[0].len, buf, 1,
+			HDIC_I2C_SLEEP);
+		if (ret)
+			goto err;
+
+		buf[0] = HDIC_CMD_I2C;
+		buf[1] = (msg[1].addr << 1) | 0x01; /* I2C read */
+		buf[2] = msg[1].len;
+		buf[3] = 0; /* I2C stop */
+		ret = dvb_usb_generic_rw(d, buf, 4, buf, 1+msg[1].len,
+			HDIC_I2C_SLEEP);
+		if (ret)
+			goto err;
+
+		memcpy(msg[1].buf, &buf[1], msg[1].len);
+
+	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		/* I2C write (typical register write) */
+		buf[0] = HDIC_CMD_I2C;
+		buf[1] = (msg[0].addr << 1); /* I2C write */
+		buf[2] = msg[0].len;
+		buf[3] = 0; /* I2C stop */
+		memcpy(&buf[4], msg[0].buf, msg[0].len);
+		ret = dvb_usb_generic_rw(d, buf, 4+msg[0].len, buf, 1,
+			HDIC_I2C_SLEEP);
+		if (ret)
+			goto err;
+	} else {
+		ret = -EOPNOTSUPP;
+		goto err;
+	}
+
+	usleep_range(100, 1000);
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return num;
+
+err:
+	deb_info("%s: failed=%d\n", __func__, ret);
+	mutex_unlock(&d->i2c_mutex);
+	return ret;
+}
+
+static u32 hdic_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm hdic_i2c_algo = {
+	.master_xfer   = hdic_i2c_xfer,
+	.functionality = hdic_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int hdic_power_ctrl(struct dvb_usb_device *d, int enable)
+{
+	u8 sbuf[] = { HDIC_CMD_SLEEP_MODE, enable ? 0 : 1 };
+	u8 rbuf[1];
+
+	deb_info("%s: enable=%d\n", __func__, enable);
+
+	return dvb_usb_generic_rw(d, sbuf, sizeof(sbuf), rbuf, sizeof(rbuf), 0);
+}
+
+static int hdic_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
+{
+	u8 sbuf[] = { HDIC_CMD_CONTROL_STREAM_TRANSFER, enable };
+	u8 rbuf[1];
+
+	deb_info("%s: enable=%d\n", __func__, enable);
+
+	return dvb_usb_generic_rw(adap->dev, sbuf, sizeof(sbuf), rbuf,
+		sizeof(rbuf), 0);
+}
+
+/* general callback */
+static int hdic_frontend_callback(void *priv, int component, int cmd, int arg)
+{
+	int ret;
+	struct dvb_frontend *fe = priv;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	u8 sbuf[2] = { HDIC_CMD_DEMOD_RESET };
+	u8 rbuf[1];
+
+	deb_info("%s:\n", __func__);
+
+	/* enable demod reset */
+	sbuf[1] = 1;
+	ret = dvb_usb_generic_rw(adap->dev, sbuf, sizeof(sbuf),
+		rbuf, sizeof(rbuf), 0);
+	if (ret)
+		deb_info("%s: failed enable demod reset\n", __func__);
+
+	usleep_range(100, 10000);
+
+	/* disable demod reset */
+	sbuf[1] = 0;
+	ret = dvb_usb_generic_rw(adap->dev, sbuf, sizeof(sbuf), rbuf,
+		sizeof(rbuf), 0);
+	if (ret)
+		deb_info("%s: failed disable demod reset\n", __func__);
+
+	return 0;
+}
+
+static struct hd29l2_config hdic_hd29l2_config = {
+	.i2c_addr = 0x73,
+	.tuner_i2c_addr = 0x60,
+	.ts_mode = HD29L2_TS_PARALLEL,
+};
+
+static int hdic_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	u8 sbuf[2];
+	u8 rbuf[3];
+
+	deb_info("%s:\n", __func__);
+
+	/* wake-up device */
+	sbuf[0] = HDIC_CMD_GET_FIRMWARE_VERSION;
+	ret = dvb_usb_generic_rw(adap->dev, sbuf, sizeof(sbuf), rbuf,
+		sizeof(rbuf), 0);
+	if (ret)
+		deb_info("%s: failed wake-up\n", __func__);
+
+	/* disable demod reset */
+	sbuf[0] = HDIC_CMD_DEMOD_RESET;
+	sbuf[1] = 0;
+	ret = dvb_usb_generic_rw(adap->dev, sbuf, sizeof(sbuf), rbuf,
+		sizeof(rbuf), 0);
+	if (ret)
+		deb_info("%s: failed disable demod reset\n", __func__);
+
+	/* attach demod */
+	adap->fe_adap[0].fe = dvb_attach(hd29l2_attach, &hdic_hd29l2_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe_adap[0].fe == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* setup the reset callback */
+	adap->fe_adap[0].fe->callback = hdic_frontend_callback;
+
+	return 0;
+err:
+	deb_info("%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static struct mxl5007t_config hdic_mxl5007t_config = {
+	.xtal_freq_hz = MxL_XTAL_24_MHZ,
+	.if_freq_hz = MxL_IF_36_15_MHZ,
+	.invert_if = 1,
+};
+
+static int hdic_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+
+	deb_info("%s:\n", __func__);
+
+	if (dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
+		&adap->dev->i2c_adap, 0x60, &hdic_mxl5007t_config) == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+err:
+	deb_info("%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties hdic_properties;
+
+static int hdic_probe(struct usb_interface *intf,
+	const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf, &hdic_properties, THIS_MODULE, NULL,
+		adapter_nr);
+}
+
+/*
+ * 04b4:1004 HDIC development board firmware
+ * 04b4:8613 CY7C68013 EZ-USB FX2 USB 2.0 Development Kit
+ */
+static struct usb_device_id hdic_id[] = {
+#define HDIC_8613       0 /* CY7C68013 EZ-USB FX2 USB 2.0 Development Kit */
+#define HDIC_1004       1 /* HDIC 04b4:1004 */
+#define HDIC_LINUX      2 /* HDIC Linux custom firmware */
+
+	[HDIC_8613] = {USB_DEVICE(USB_VID_CYPRESS, 0x8613)},
+	[HDIC_1004] = {USB_DEVICE(USB_VID_CYPRESS, 0x1004)},
+	[HDIC_LINUX] = {USB_DEVICE(USB_VID_CYPRESS, 0x1e04)},
+	{} /* terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, hdic_id);
+
+static struct dvb_usb_device_properties hdic_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-hdic.fw",
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.num_frontends = 1,
+			.fe = {
+				{
+					.streaming_ctrl  = hdic_streaming_ctrl,
+					.frontend_attach = hdic_frontend_attach,
+					.tuner_attach    = hdic_tuner_attach,
+
+					.stream = {
+						.type = USB_BULK,
+						.count = 5,
+						.endpoint = 0x02,
+						.u = {
+							.bulk = {
+								.buffersize =
+									(4*512),
+							}
+						}
+					},
+				}
+			},
+		}
+	},
+
+	.power_ctrl = hdic_power_ctrl,
+
+	.i2c_algo = &hdic_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "HDIC reference design",
+			.cold_ids = {&hdic_id[HDIC_8613],
+				&hdic_id[HDIC_1004], NULL},
+			.warm_ids = {&hdic_id[HDIC_LINUX], NULL},
+		},
+	}
+};
+
+static struct usb_driver hdic_driver = {
+	.name       = "dvb_usb_hdic",
+	.probe      = hdic_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table   = hdic_id,
+};
+
+/* module stuff */
+static int __init hdic_module_init(void)
+{
+	int ret;
+
+	deb_info("%s:\n", __func__);
+
+	ret = usb_register(&hdic_driver);
+	if (ret)
+		err("module init failed=%d", ret);
+
+	return ret;
+}
+
+static void __exit hdic_module_exit(void)
+{
+	deb_info("%s:\n", __func__);
+
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&hdic_driver);
+}
+
+module_init(hdic_module_init);
+module_exit(hdic_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("HDIC DMB-TH reference design USB2.0 driver (custom firmware)");
+MODULE_LICENSE("GPL");

drivers/media/dvb/dvb-usb/hdic.h

+/*
+ * DVB USB Linux driver for the HDIC receiver
+ *
+ * Copyright (C) 2011 Metropolia University of Applied Sciences, Electria R&D
+ *
+ * Author: Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef HDIC_H
+#define HDIC_H
+
+#define DVB_USB_LOG_PREFIX "hdic"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_hdic_debug, 0x01, args)
+#define deb_rc(args...)   dprintk(dvb_usb_hdic_debug, 0x02, args)
+#define deb_xfer(args...) dprintk(dvb_usb_hdic_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_hdic_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_hdic_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_hdic_debug, 0x20, args)
+
+enum hdic_cmd {
+	HDIC_CMD_I2C                     = 0x00,
+	HDIC_CMD_CONTROL_STREAM_TRANSFER = 0x03,
+	HDIC_CMD_SLEEP_MODE              = 0x09,
+	HDIC_CMD_GET_FIRMWARE_VERSION    = 0x0a,
+	HDIC_CMD_DEMOD_RESET             = 0x0b,
+};
+
+
+#endif