Merge bk://gkernel.bkbits.net/libata-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/scsi/libata-core.c

@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/spinlock.h>
 #include <linux/blkdev.h>
@@ -1919,7 +1920,24 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
 	if (idx)
 		ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
 }
+/**
+ *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ *	@qc: Metadata associated with taskfile to check
+ *
+ *	LOCKING:
+ *	RETURNS: 0 when ATAPI DMA can be used
+ *               nonzero otherwise
+ */
+int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	int rc = 0; /* Assume ATAPI DMA is OK by default */
+
+	if (ap->ops->check_atapi_dma)
+		rc = ap->ops->check_atapi_dma(qc);
 
+	return rc;
+}
 /**
  *	ata_qc_prep - Prepare taskfile for submission
  *	@qc: Metadata associated with taskfile to be prepared
@@ -2369,6 +2387,9 @@ static void ata_pio_task(void *_data)
 	unsigned long timeout = 0;
 
 	switch (ap->pio_task_state) {
+	case PIO_ST_IDLE:
+		return;
+
 	case PIO_ST:
 		ata_pio_block(ap);
 		break;
@@ -2385,18 +2406,14 @@ static void ata_pio_task(void *_data)
 	case PIO_ST_TMOUT:
 	case PIO_ST_ERR:
 		ata_pio_error(ap);
-		break;
+		return;
 	}
 
-	if ((ap->pio_task_state != PIO_ST_IDLE) &&
-	    (ap->pio_task_state != PIO_ST_TMOUT) &&
-	    (ap->pio_task_state != PIO_ST_ERR)) {
 	if (timeout)
 		queue_delayed_work(ata_wq, &ap->pio_task,
 				   timeout);
 	else
 		queue_work(ata_wq, &ap->pio_task);
-	}
 }
 
 static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
@@ -2405,7 +2422,6 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
 	DECLARE_COMPLETION(wait);
 	struct ata_queued_cmd *qc;
 	unsigned long flags;
-	int using_pio = dev->flags & ATA_DFLAG_PIO;
 	int rc;
 
 	DPRINTK("ATAPI request sense\n");
@@ -2426,16 +2442,10 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
 	qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	qc->tf.command = ATA_CMD_PACKET;
 
-	if (using_pio) {
 	qc->tf.protocol = ATA_PROT_ATAPI;
 	qc->tf.lbam = (8 * 1024) & 0xff;
 	qc->tf.lbah = (8 * 1024) >> 8;
-
 	qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-	} else {
-		qc->tf.protocol = ATA_PROT_ATAPI_DMA;
-		qc->tf.feature |= ATAPI_PKT_DMA;
-	}
 
 	qc->waiting = &wait;
 	qc->complete_fn = ata_qc_complete_noop;

drivers/scsi/libata-scsi.c

@@ -1294,6 +1294,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
 	int using_pio = (dev->flags & ATA_DFLAG_PIO);
 	int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE);
 
+	if (!using_pio)
+		/* Check whether ATAPI DMA is safe */
+		if (ata_check_atapi_dma(qc))
+			using_pio = 1;
+
 	memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
 
 	qc->complete_fn = atapi_qc_complete;

drivers/scsi/libata.h

@@ -38,6 +38,7 @@ struct ata_scsi_args {
 extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
 				      struct ata_device *dev);
 extern int ata_qc_issue(struct ata_queued_cmd *qc);
+extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
 extern void ata_dev_select(struct ata_port *ap, unsigned int device,
                            unsigned int wait, unsigned int can_sleep);
 extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);

drivers/scsi/sata_uli.c

@@ -32,16 +32,18 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"0.2"
+#define DRV_VERSION	"0.5"
 
 enum {
 	uli_5289		= 0,
 	uli_5287		= 1,
+	uli_5281		= 2,
 
 	/* PCI configuration registers */
-	ULI_SCR_BASE		= 0x90, /* sata0 phy SCR registers */
-	ULI_SATA1_OFS		= 0x10, /* offset from sata0->sata1 phy regs */
-
+	ULI5287_BASE		= 0x90, /* sata0 phy SCR registers */
+	ULI5287_OFFS		= 0x10, /* offset from sata0->sata1 phy regs */
+	ULI5281_BASE		= 0x60, /* sata0 phy SCR  registers */
+	ULI5281_OFFS		= 0x60, /* offset from sata0->sata1 phy regs */
 };
 
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -51,6 +53,7 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static struct pci_device_id uli_pci_tbl[] = {
 	{ PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 },
 	{ PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 },
+	{ PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 },
 	{ }	/* terminate list */
 };
 
@@ -125,33 +128,15 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
+static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
 {
-	unsigned int addr = ULI_SCR_BASE + (4 * sc_reg);
-
-	switch (port_no) {
-	case 0:
-		break;
-	case 1:
-		addr += ULI_SATA1_OFS;
-		break;
-	case 2:
-		addr += ULI_SATA1_OFS*4;
-		break;
-	case 3:
-		addr += ULI_SATA1_OFS*5;
-		break;
-	default:
-		BUG();
-		break;
-	}
-	return addr;
+	return ap->ioaddr.scr_addr + (4 * sc_reg);
 }
 
 static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
-	unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg);
+	unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
 	u32 val;
 
 	pci_read_config_dword(pdev, cfg_addr, &val);
@@ -161,7 +146,7 @@ static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
 static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
-	unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr);
+	unsigned int cfg_addr = get_scr_cfg_addr(ap, scr);
 
 	pci_write_config_dword(pdev, cfg_addr, val);
 }
@@ -225,6 +210,8 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	
 	switch (board_idx) {
 	case uli_5287:
+		probe_ent->port[0].scr_addr = ULI5287_BASE;
+		probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
        		probe_ent->n_ports = 4;
 
        		probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8;
@@ -232,19 +219,27 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		probe_ent->port[2].ctl_addr =
 			(pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4;
 		probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16;
+		probe_ent->port[2].scr_addr = ULI5287_BASE + ULI5287_OFFS*4;
 
 		probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8;
 		probe_ent->port[3].altstatus_addr =
 		probe_ent->port[3].ctl_addr =
 			(pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4;
 		probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24;
+		probe_ent->port[3].scr_addr = ULI5287_BASE + ULI5287_OFFS*5;
 
 		ata_std_ports(&probe_ent->port[2]);
 		ata_std_ports(&probe_ent->port[3]);
 		break;
 
 	case uli_5289:
-		/* do nothing; ata_pci_init_native_mode did it all */
+		probe_ent->port[0].scr_addr = ULI5287_BASE;
+		probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
+		break;
+
+	case uli_5281:
+		probe_ent->port[0].scr_addr = ULI5281_BASE;
+		probe_ent->port[1].scr_addr = ULI5281_BASE + ULI5281_OFFS;
 		break;
 
 	default:

include/linux/libata.h

@@ -339,6 +339,8 @@ struct ata_port_operations {
 	void (*phy_reset) (struct ata_port *ap);
 	void (*post_set_mode) (struct ata_port *ap);
 
+	int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+
 	void (*bmdma_setup) (struct ata_queued_cmd *qc);
 	void (*bmdma_start) (struct ata_queued_cmd *qc);