iio: proximity: sx9500: Add GPIO ACPI mapping table

In order to satisfy GPIO ACPI library requirements convert users of
gpiod_get_index() to correctly behave when there no mapping is provided
by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/proximity/sx9500.c

@@ -32,9 +32,6 @@
 #define SX9500_DRIVER_NAME		"sx9500"
 #define SX9500_IRQ_NAME			"sx9500_event"
 
-#define SX9500_GPIO_INT			"interrupt"
-#define SX9500_GPIO_RESET		"reset"
-
 /* Register definitions. */
 #define SX9500_REG_IRQ_SRC		0x00
 #define SX9500_REG_STAT			0x01
@@ -866,26 +863,44 @@ static int sx9500_init_device(struct iio_dev *indio_dev)
 	return sx9500_init_compensation(indio_dev);
 }
 
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params interrupt_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_sx9500_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	/*
+	 * Some platforms have a bug in ACPI GPIO description making IRQ
+	 * GPIO to be output only. Ask the GPIO core to ignore this limit.
+	 */
+	{ "interrupt-gpios", &interrupt_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
+	{ },
+};
+
 static void sx9500_gpio_probe(struct i2c_client *client,
 			      struct sx9500_data *data)
 {
 	struct gpio_desc *gpiod_int;
 	struct device *dev;
+	int ret;
 
 	if (!client)
 		return;
 
 	dev = &client->dev;
 
+	ret = devm_acpi_dev_add_driver_gpios(dev, acpi_sx9500_gpios);
+	if (ret)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
 	if (client->irq <= 0) {
-		gpiod_int = devm_gpiod_get(dev, SX9500_GPIO_INT, GPIOD_IN);
+		gpiod_int = devm_gpiod_get(dev, "interrupt", GPIOD_IN);
 		if (IS_ERR(gpiod_int))
 			dev_err(dev, "gpio get irq failed\n");
 		else
 			client->irq = gpiod_to_irq(gpiod_int);
 	}
 
-	data->gpiod_rst = devm_gpiod_get(dev, SX9500_GPIO_RESET, GPIOD_OUT_HIGH);
+	data->gpiod_rst = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(data->gpiod_rst)) {
 		dev_warn(dev, "gpio get reset pin failed\n");
 		data->gpiod_rst = NULL;