Commit b6fe3977 authored by Ezequiel Garcia's avatar Ezequiel Garcia Committed by Mark Brown

spi: img-spfi: Implement a prepare_message() callback

In preparation for switching to using the SPI core's CS GPIO handling,
move setup of the PORT_STATE register, which must be configured before
CS is asserted, to a prepare_message() callback.
Signed-off-by: default avatarEzequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: default avatarAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 6e0050ec
......@@ -396,6 +396,25 @@ static int img_spfi_start_dma(struct spi_master *master,
return -EIO;
}
static int img_spfi_prepare(struct spi_master *master, struct spi_message *msg)
{
struct img_spfi *spfi = spi_master_get_devdata(master);
u32 val;
val = spfi_readl(spfi, SPFI_PORT_STATE);
if (msg->spi->mode & SPI_CPHA)
val |= SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
else
val &= ~SPFI_PORT_STATE_CK_PHASE(msg->spi->chip_select);
if (msg->spi->mode & SPI_CPOL)
val |= SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
else
val &= ~SPFI_PORT_STATE_CK_POL(msg->spi->chip_select);
spfi_writel(spfi, val, SPFI_PORT_STATE);
return 0;
}
static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
......@@ -433,18 +452,6 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
&master->cur_msg->transfers))
val |= SPFI_CONTROL_CONTINUE;
spfi_writel(spfi, val, SPFI_CONTROL);
val = spfi_readl(spfi, SPFI_PORT_STATE);
if (spi->mode & SPI_CPHA)
val |= SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
else
val &= ~SPFI_PORT_STATE_CK_PHASE(spi->chip_select);
if (spi->mode & SPI_CPOL)
val |= SPFI_PORT_STATE_CK_POL(spi->chip_select);
else
val &= ~SPFI_PORT_STATE_CK_POL(spi->chip_select);
spfi_writel(spfi, val, SPFI_PORT_STATE);
spfi_writel(spfi, xfer->len << SPFI_TRANSACTION_TSIZE_SHIFT,
SPFI_TRANSACTION);
}
......@@ -591,6 +598,7 @@ static int img_spfi_probe(struct platform_device *pdev)
master->set_cs = img_spfi_set_cs;
master->transfer_one = img_spfi_transfer_one;
master->prepare_message = img_spfi_prepare;
spfi->tx_ch = dma_request_slave_channel(spfi->dev, "tx");
spfi->rx_ch = dma_request_slave_channel(spfi->dev, "rx");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment