Commit bdb3eec7 authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Shawn Guo

ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions

Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 4e942303
...@@ -36,7 +36,7 @@ &fec { ...@@ -36,7 +36,7 @@ &fec {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>; pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii"; phy-mode = "mii";
phy-reset-gpios = <&gpio3 0 0>; phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
phy-reset-duration = <1>; phy-reset-duration = <1>;
status = "okay"; status = "okay";
}; };
......
...@@ -48,7 +48,7 @@ gpio-keys { ...@@ -48,7 +48,7 @@ gpio-keys {
user-key { user-key {
label = "user"; label = "user";
gpios = <&gpio1 3 0>; gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <256>; /* BTN_0 */ linux,code = <256>; /* BTN_0 */
}; };
}; };
...@@ -58,7 +58,7 @@ leds { ...@@ -58,7 +58,7 @@ leds {
user { user {
label = "Heartbeat"; label = "Heartbeat";
gpios = <&gpio1 2 0>; gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat"; linux,default-trigger = "heartbeat";
}; };
}; };
...@@ -68,7 +68,8 @@ &ecspi1 { ...@@ -68,7 +68,8 @@ &ecspi1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>; pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>; fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -76,14 +77,15 @@ &ecspi2 { ...@@ -76,14 +77,15 @@ &ecspi2 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>; pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>; fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>; cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
<&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay"; status = "okay";
}; };
&esdhc1 { &esdhc1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>; pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 29 0>; cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
bus-width = <4>; bus-width = <4>;
status = "okay"; status = "okay";
}; };
......
...@@ -75,7 +75,7 @@ gpio-keys { ...@@ -75,7 +75,7 @@ gpio-keys {
power { power {
label = "Power Button"; label = "Power Button";
gpios = <&gpio2 21 0>; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */ linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup; gpio-key,wakeup;
}; };
...@@ -105,7 +105,7 @@ clk_26M: codec_clock { ...@@ -105,7 +105,7 @@ clk_26M: codec_clock {
reg=<0>; reg=<0>;
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <26000000>; clock-frequency = <26000000>;
gpios = <&gpio4 26 1>; gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
}; };
}; };
}; };
...@@ -121,8 +121,8 @@ &esdhc1 { ...@@ -121,8 +121,8 @@ &esdhc1 {
&esdhc2 { &esdhc2 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>; pinctrl-0 = <&pinctrl_esdhc2>;
cd-gpios = <&gpio1 6 0>; cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 5 0>; wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
}; };
...@@ -137,7 +137,8 @@ &ecspi1 { ...@@ -137,7 +137,8 @@ &ecspi1 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>; pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>; fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
<&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay"; status = "okay";
pmic: mc13892@0 { pmic: mc13892@0 {
......
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
#include "imx51-pinfunc.h" #include "imx51-pinfunc.h"
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
/ { / {
aliases { aliases {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment