x86: Remove X86_FEATURE_MFENCE_RDTSC

AMD and Intel both have serializing lfence (X86_FEATURE_LFENCE_RDTSC).
They've both had it for a long time, and AMD has had it enabled in Linux
since Spectre v1 was announced.

Back then, there was a proposal to remove the serializing mfence feature
bit (X86_FEATURE_MFENCE_RDTSC), since both AMD and Intel have
serializing lfence.  At the time, it was (ahem) speculated that some
hypervisors might not yet support its removal, so it remained for the
time being.

Now a year-and-a-half later, it should be safe to remove.

I asked Andrew Cooper about whether it's still needed:

  So if you're virtualised, you've got no choice in the matter.  lfence
  is either dispatch-serialising or not on AMD, and you won't be able to
  change it.

  Furthermore, you can't accurately tell what state the bit is in, because
  the MSR might not be virtualised at all, or may not reflect the true
  state in hardware.  Worse still, attempting to set the bit may not be
  successful even if there isn't a fault for doing so.

  Xen sets the DE_CFG bit unconditionally, as does Linux by the looks of
  things (see MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT).  ISTR other hypervisor
  vendors saying the same, but I don't have any information to hand.

  If you are running under a hypervisor which has been updated, then
  lfence will almost certainly be dispatch-serialising in practice, and
  you'll almost certainly see the bit already set in DE_CFG.  If you're
  running under a hypervisor which hasn't been patched since Spectre,
  you've already lost in many more ways.

  I'd argue that X86_FEATURE_MFENCE_RDTSC is not worth keeping.

So remove it.  This will reduce some code rot, and also make it easier
to hook barrier_nospec() up to a cmdline disable for performance
raisins, without having to need an alternative_3() macro.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/d990aa51e40063acb9888e8c1b688e41355a9588.1562255067.git.jpoimboe@redhat.com

arch/x86/include/asm/barrier.h

@@ -49,8 +49,7 @@ static inline unsigned long array_index_mask_nospec(unsigned long index,
 #define array_index_mask_nospec array_index_mask_nospec
 
 /* Prevent speculative execution past this barrier. */
-#define barrier_nospec() alternative_2("", "mfence", X86_FEATURE_MFENCE_RDTSC, \
-					   "lfence", X86_FEATURE_LFENCE_RDTSC)
+#define barrier_nospec() alternative("", "lfence", X86_FEATURE_LFENCE_RDTSC)
 
 #define dma_rmb()	barrier()
 #define dma_wmb()	barrier()

arch/x86/include/asm/cpufeatures.h

@@ -96,7 +96,6 @@
 #define X86_FEATURE_SYSCALL32		( 3*32+14) /* "" syscall in IA32 userspace */
 #define X86_FEATURE_SYSENTER32		( 3*32+15) /* "" sysenter in IA32 userspace */
 #define X86_FEATURE_REP_GOOD		( 3*32+16) /* REP microcode works well */
-#define X86_FEATURE_MFENCE_RDTSC	( 3*32+17) /* "" MFENCE synchronizes RDTSC */
 #define X86_FEATURE_LFENCE_RDTSC	( 3*32+18) /* "" LFENCE synchronizes RDTSC */
 #define X86_FEATURE_ACC_POWER		( 3*32+19) /* AMD Accumulated Power Mechanism */
 #define X86_FEATURE_NOPL		( 3*32+20) /* The NOPL (0F 1F) instructions */

arch/x86/include/asm/msr.h

@@ -233,8 +233,7 @@ static __always_inline unsigned long long rdtsc_ordered(void)
 	 * Thus, use the preferred barrier on the respective CPU, aiming for
 	 * RDTSCP as the default.
 	 */
-	asm volatile(ALTERNATIVE_3("rdtsc",
-				   "mfence; rdtsc", X86_FEATURE_MFENCE_RDTSC,
+	asm volatile(ALTERNATIVE_2("rdtsc",
 				   "lfence; rdtsc", X86_FEATURE_LFENCE_RDTSC,
 				   "rdtscp", X86_FEATURE_RDTSCP)
 			: EAX_EDX_RET(val, low, high)

arch/x86/kernel/cpu/amd.c

@@ -879,12 +879,8 @@ static void init_amd(struct cpuinfo_x86 *c)
 	init_amd_cacheinfo(c);
 
 	if (cpu_has(c, X86_FEATURE_XMM2)) {
-		unsigned long long val;
-		int ret;
-
 		/*
-		 * A serializing LFENCE has less overhead than MFENCE, so
-		 * use it for execution serialization.  On families which
+		 * Use LFENCE for execution serialization.  On families which
 		 * don't have that MSR, LFENCE is already serializing.
 		 * msr_set_bit() uses the safe accessors, too, even if the MSR
 		 * is not present.
@@ -892,19 +888,8 @@ static void init_amd(struct cpuinfo_x86 *c)
 		msr_set_bit(MSR_F10H_DECFG,
 			    MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
 
-		/*
-		 * Verify that the MSR write was successful (could be running
-		 * under a hypervisor) and only then assume that LFENCE is
-		 * serializing.
-		 */
-		ret = rdmsrl_safe(MSR_F10H_DECFG, &val);
-		if (!ret && (val & MSR_F10H_DECFG_LFENCE_SERIALIZE)) {
 		/* A serializing LFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-		} else {
-			/* MFENCE stops RDTSC speculation */
-			set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-		}
 	}
 
 	/*

arch/x86/kernel/cpu/hygon.c

@@ -330,12 +330,8 @@ static void init_hygon(struct cpuinfo_x86 *c)
 	init_hygon_cacheinfo(c);
 
 	if (cpu_has(c, X86_FEATURE_XMM2)) {
-		unsigned long long val;
-		int ret;
-
 		/*
-		 * A serializing LFENCE has less overhead than MFENCE, so
-		 * use it for execution serialization.  On families which
+		 * Use LFENCE for execution serialization.  On families which
 		 * don't have that MSR, LFENCE is already serializing.
 		 * msr_set_bit() uses the safe accessors, too, even if the MSR
 		 * is not present.
@@ -343,19 +339,8 @@ static void init_hygon(struct cpuinfo_x86 *c)
 		msr_set_bit(MSR_F10H_DECFG,
 			    MSR_F10H_DECFG_LFENCE_SERIALIZE_BIT);
 
-		/*
-		 * Verify that the MSR write was successful (could be running
-		 * under a hypervisor) and only then assume that LFENCE is
-		 * serializing.
-		 */
-		ret = rdmsrl_safe(MSR_F10H_DECFG, &val);
-		if (!ret && (val & MSR_F10H_DECFG_LFENCE_SERIALIZE)) {
 		/* A serializing LFENCE stops RDTSC speculation */
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-		} else {
-			/* MFENCE stops RDTSC speculation */
-			set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-		}
 	}
 
 	/*

tools/arch/x86/include/asm/cpufeatures.h

@@ -96,7 +96,6 @@
 #define X86_FEATURE_SYSCALL32		( 3*32+14) /* "" syscall in IA32 userspace */
 #define X86_FEATURE_SYSENTER32		( 3*32+15) /* "" sysenter in IA32 userspace */
 #define X86_FEATURE_REP_GOOD		( 3*32+16) /* REP microcode works well */
-#define X86_FEATURE_MFENCE_RDTSC	( 3*32+17) /* "" MFENCE synchronizes RDTSC */
 #define X86_FEATURE_LFENCE_RDTSC	( 3*32+18) /* "" LFENCE synchronizes RDTSC */
 #define X86_FEATURE_ACC_POWER		( 3*32+19) /* AMD Accumulated Power Mechanism */
 #define X86_FEATURE_NOPL		( 3*32+20) /* The NOPL (0F 1F) instructions */