e1000e: synchronization of MAC-PHY interface only on non- ME systems

On power up, the MAC - PHY interface needs to be set to PCIe, even if
cable is disconnected.  In ME systems, the ME handles this on exit from
Sx state. In non-ME, the driver handles it. Added a check for non-ME
system to the driver code that handles that.
Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -237,8 +237,9 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 	if (ret_val)
 		return false;
 out:
-	if ((hw->mac.type == e1000_pch_lpt) ||
-	    (hw->mac.type == e1000_pch_spt)) {
+	if ((hw->mac.type == e1000_pch_lpt) || (hw->mac.type == e1000_pch_spt)) {
+		/* Only unforce SMBus if ME is not active */
+		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
 			/* Unforce SMBus mode in PHY */
 			e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
 			phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
@@ -249,6 +250,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
 			mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
 			ew32(CTRL_EXT, mac_reg);
 		}
+	}
 
 	return true;
 }