drm/amd/display: Fix gpio port mapping issue

[Why]
1. Port of gpio has different mapping.

[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Steve Su <steve.su@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/gpio/dcn32/hw_factory_dcn32.c

@@ -107,6 +107,13 @@ static const struct ddc_registers ddc_data_regs_dcn[] = {
 	ddc_data_regs_dcn2(3),
 	ddc_data_regs_dcn2(4),
 	ddc_data_regs_dcn2(5),
+	{
+		// add a dummy entry for cases no such port
+		{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,},
+		.ddc_setup = 0,
+		.phy_aux_cntl = 0,
+		.dc_gpio_aux_ctrl_5 = 0
+	},
 	{
 			DDC_GPIO_VGA_REG_LIST(DATA),
 			.ddc_setup = 0,
@@ -121,6 +128,13 @@ static const struct ddc_registers ddc_clk_regs_dcn[] = {
 	ddc_clk_regs_dcn2(3),
 	ddc_clk_regs_dcn2(4),
 	ddc_clk_regs_dcn2(5),
+	{
+		// add a dummy entry for cases no such port
+		{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,},
+		.ddc_setup = 0,
+		.phy_aux_cntl = 0,
+		.dc_gpio_aux_ctrl_5 = 0
+	},
 	{
 			DDC_GPIO_VGA_REG_LIST(CLK),
 			.ddc_setup = 0,

drivers/gpu/drm/amd/display/dc/gpio/hw_ddc.c

@@ -94,11 +94,14 @@ static enum gpio_result set_config(
 		 * is required for detection of AUX mode */
 		if (hw_gpio->base.en != GPIO_DDC_LINE_VIP_PAD) {
 			if (!ddc_data_pd_en || !ddc_clk_pd_en) {
-
-				REG_SET_2(gpio.MASK_reg, regval,
+				if (hw_gpio->base.en == GPIO_DDC_LINE_DDC_VGA) {
+					// bit 4 of mask has different usage in some cases
+					REG_SET(gpio.MASK_reg, regval, DC_GPIO_DDC1DATA_PD_EN, 1);
+				} else {
+					REG_SET_2(gpio.MASK_reg, regval,
 						DC_GPIO_DDC1DATA_PD_EN, 1,
 						DC_GPIO_DDC1CLK_PD_EN, 1);
-
+				}
 				if (config_data->type ==
 						GPIO_CONFIG_TYPE_I2C_AUX_DUAL_MODE)
 					msleep(3);