arm64: dts: qcom: use generic node name "gpio" in SPMI PMIC

GPIO controller nodes are named by convention just "gpio", not "gpios".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908080938.29199-2-krzysztof.kozlowski@linaro.org

arch/arm64/boot/dts/qcom/pm6150.dtsi

@@ -86,7 +86,7 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150_gpio: gpios@c000 {
+		pm6150_gpio: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm6150l.dtsi

@@ -55,7 +55,7 @@ pm6150l_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150l_gpio: gpios@c000 {
+		pm6150l_gpio: gpio@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm6350.dtsi

@@ -35,7 +35,7 @@ pm6350_resin: resin {
 			};
 		};
 
-		pm6350_gpios: gpios@c000 {
+		pm6350_gpios: gpio@c000 {
 			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm660.dtsi

@@ -170,7 +170,7 @@ vcoin: vcoin@83 {
 			};
 		};
 
-		pm660_gpios: gpios@c000 {
+		pm660_gpios: gpio@c000 {
 			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm660l.dtsi

@@ -48,7 +48,7 @@ pm660l_temp: temp-alarm@2400 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm660l_gpios: gpios@c000 {
+		pm660l_gpios: gpio@c000 {
 			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm7325.dtsi

@@ -18,7 +18,7 @@ pm7325_temp_alarm: temp-alarm@a00 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm7325_gpios: gpios@8800 {
+		pm7325_gpios: gpio@8800 {
 			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm8005.dtsi

@@ -11,7 +11,7 @@ pm8005_lsid0: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8005_gpio: gpios@c000 {
+		pm8005_gpio: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -107,7 +107,7 @@ pm8916_mpps: mpps@a000 {
 			#interrupt-cells = <2>;
 		};
 
-		pm8916_gpios: gpios@c000 {
+		pm8916_gpios: gpio@c000 {
 			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm8994.dtsi

@@ -108,7 +108,7 @@ adc-chan@f {
 			};
 		};
 
-		pm8994_gpios: gpios@c000 {
+		pm8994_gpios: gpio@c000 {
 			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pm8998.dtsi

@@ -101,7 +101,7 @@ rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm8998_gpio: gpios@c000 {
+		pm8998_gpio: gpio@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pmi8994.dtsi

@@ -10,7 +10,7 @@ pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8994_gpios: gpios@c000 {
+		pmi8994_gpios: gpio@c000 {
 			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;

arch/arm64/boot/dts/qcom/pmi8998.dtsi

@@ -9,7 +9,7 @@ pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8998_gpio: gpios@c000 {
+		pmi8998_gpio: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;