Commit cea8975e authored by Anirban Chakraborty's avatar Anirban Chakraborty Committed by David S. Miller

qlcnic: restore NPAR config data after recovery

o NPAR configuration which is programmed in fw, need to
  restore after fw recovery.
o Update version to 5.0.7
Signed-off-by: default avatarAnirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: default avatarRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 451724c8
......@@ -51,8 +51,8 @@
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
#define _QLCNIC_LINUX_SUBVERSION 6
#define QLCNIC_LINUX_VERSIONID "5.0.6"
#define _QLCNIC_LINUX_SUBVERSION 7
#define QLCNIC_LINUX_VERSIONID "5.0.7"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
......@@ -949,7 +949,6 @@ struct qlcnic_adapter {
u8 has_link_events;
u8 fw_type;
u16 tx_context_id;
u16 mtu;
u16 is_up;
u16 link_speed;
......@@ -1044,6 +1043,8 @@ struct qlcnic_pci_info {
struct qlcnic_npar_info {
u16 vlan_id;
u16 min_bw;
u16 max_bw;
u8 phy_port;
u8 type;
u8 active;
......
......@@ -636,6 +636,8 @@ int qlcnic_get_nic_info(struct qlcnic_adapter *adapter,
QLCNIC_CDRP_CMD_GET_NIC_INFO);
if (err == QLCNIC_RCODE_SUCCESS) {
npar_info->pci_func = le16_to_cpu(nic_info->pci_func);
npar_info->op_mode = le16_to_cpu(nic_info->op_mode);
npar_info->phys_port = le16_to_cpu(nic_info->phys_port);
npar_info->switch_mode = le16_to_cpu(nic_info->switch_mode);
npar_info->max_tx_ques = le16_to_cpu(nic_info->max_tx_ques);
......
......@@ -507,6 +507,8 @@ qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
adapter->npars[pfn].type = pci_info[i].type;
adapter->npars[pfn].phy_port = pci_info[i].default_port;
adapter->npars[pfn].mac_learning = DEFAULT_MAC_LEARN;
adapter->npars[pfn].min_bw = pci_info[i].tx_min_bw;
adapter->npars[pfn].max_bw = pci_info[i].tx_max_bw;
}
for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
......@@ -770,6 +772,50 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
adapter->max_rds_rings = 2;
}
static int
qlcnic_reset_npar_config(struct qlcnic_adapter *adapter)
{
int i, err = 0;
struct qlcnic_npar_info *npar;
struct qlcnic_info nic_info;
if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED) ||
!adapter->need_fw_reset)
return 0;
if (adapter->op_mode == QLCNIC_MGMT_FUNC) {
/* Set the NPAR config data after FW reset */
for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
npar = &adapter->npars[i];
if (npar->type != QLCNIC_TYPE_NIC)
continue;
err = qlcnic_get_nic_info(adapter, &nic_info, i);
if (err)
goto err_out;
nic_info.min_tx_bw = npar->min_bw;
nic_info.max_tx_bw = npar->max_bw;
err = qlcnic_set_nic_info(adapter, &nic_info);
if (err)
goto err_out;
if (npar->enable_pm) {
err = qlcnic_config_port_mirroring(adapter,
npar->dest_npar, 1, i);
if (err)
goto err_out;
}
npar->mac_learning = DEFAULT_MAC_LEARN;
npar->host_vlan_tag = 0;
npar->promisc_mode = 0;
npar->discard_tagged = 0;
npar->vlan_id = 0;
}
}
err_out:
return err;
}
static int
qlcnic_start_firmware(struct qlcnic_adapter *adapter)
{
......@@ -834,9 +880,8 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter)
qlcnic_idc_debug_info(adapter, 1);
qlcnic_check_options(adapter);
if (adapter->flags & QLCNIC_ESWITCH_ENABLED &&
adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
if (qlcnic_reset_npar_config(adapter))
goto err_out;
qlcnic_dev_set_npar_ready(adapter);
adapter->need_fw_reset = 0;
......@@ -2486,6 +2531,7 @@ qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
{
u32 state;
adapter->need_fw_reset = 1;
if (qlcnic_api_lock(adapter))
return;
......@@ -2506,6 +2552,9 @@ qlcnic_dev_set_npar_ready(struct qlcnic_adapter *adapter)
{
u32 state;
if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED) ||
adapter->op_mode == QLCNIC_NON_PRIV_FUNC)
return;
if (qlcnic_api_lock(adapter))
return;
......@@ -3019,7 +3068,7 @@ static struct bin_attribute bin_attr_mem = {
.write = qlcnic_sysfs_write_mem,
};
int
static int
validate_pm_config(struct qlcnic_adapter *adapter,
struct qlcnic_pm_func_cfg *pm_cfg, int count)
{
......@@ -3118,7 +3167,7 @@ qlcnic_sysfs_read_pm_config(struct file *filp, struct kobject *kobj,
return size;
}
int
static int
validate_esw_config(struct qlcnic_adapter *adapter,
struct qlcnic_esw_func_cfg *esw_cfg, int count)
{
......@@ -3154,9 +3203,8 @@ qlcnic_sysfs_write_esw_config(struct file *file, struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
struct qlcnic_esw_func_cfg *esw_cfg;
u8 id, discard_tagged, promsc_mode, mac_learn;
u8 vlan_tagging, pci_func, vlan_id;
int count, rem, i, ret;
u8 id, pci_func;
count = size / sizeof(struct qlcnic_esw_func_cfg);
rem = size % sizeof(struct qlcnic_esw_func_cfg);
......@@ -3171,17 +3219,13 @@ qlcnic_sysfs_write_esw_config(struct file *file, struct kobject *kobj,
for (i = 0; i < count; i++) {
pci_func = esw_cfg[i].pci_func;
id = adapter->npars[pci_func].phy_port;
vlan_tagging = esw_cfg[i].host_vlan_tag;
promsc_mode = esw_cfg[i].promisc_mode;
mac_learn = esw_cfg[i].mac_learning;
vlan_id = esw_cfg[i].vlan_id;
discard_tagged = esw_cfg[i].discard_tagged;
ret = qlcnic_config_switch_port(adapter, id, vlan_tagging,
discard_tagged,
promsc_mode,
mac_learn,
pci_func,
vlan_id);
ret = qlcnic_config_switch_port(adapter, id,
esw_cfg[i].host_vlan_tag,
esw_cfg[i].discard_tagged,
esw_cfg[i].promisc_mode,
esw_cfg[i].mac_learning,
esw_cfg[i].pci_func,
esw_cfg[i].vlan_id);
if (ret)
return ret;
}
......@@ -3227,7 +3271,7 @@ qlcnic_sysfs_read_esw_config(struct file *file, struct kobject *kobj,
return size;
}
int
static int
validate_npar_config(struct qlcnic_adapter *adapter,
struct qlcnic_npar_func_cfg *np_cfg, int count)
{
......@@ -3282,6 +3326,8 @@ qlcnic_sysfs_write_npar_config(struct file *file, struct kobject *kobj,
ret = qlcnic_set_nic_info(adapter, &nic_info);
if (ret)
return ret;
adapter->npars[i].min_bw = nic_info.min_tx_bw;
adapter->npars[i].max_bw = nic_info.max_tx_bw;
}
return size;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment