spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP

This commit updates the SPI subsystem, particularly affecting "SPI MEM"
drivers and core parts, by replacing the -ENOTSUPP error code with
-EOPNOTSUPP.

The key motivations for this change are as follows:
1. The spi-nor driver currently uses EOPNOTSUPP, whereas calls to spi-mem
might return ENOTSUPP. This update aims to unify the error reporting
within the SPI subsystem for clarity and consistency.

2. The use of ENOTSUPP has been flagged by checkpatch as inappropriate,
mainly being reserved for NFS-related errors. To align with kernel coding
standards and recommendations, this change is being made.

3. By using EOPNOTSUPP, we provide more specific context to the error,
indicating that a particular operation is not supported. This helps
differentiate from the more generic ENOTSUPP error, allowing drivers to
better handle and respond to different error scenarios.

Risks and Considerations:
While this change is primarily intended as a code cleanup and error code
unification, there is a minor risk of breaking user-space applications
that rely on specific return codes for unsupported operations. However,
this risk is considered low, as such use-cases are unlikely to be common
or critical. Nevertheless, developers and users should be aware of this
change, especially if they have scripts or tools that specifically handle
SPI error codes.

This commit does not introduce any functional changes to the SPI subsystem
or the affected drivers.
Signed-off-by: "Chia-Lin Kao (AceLan)" <acelan.kao@canonical.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20231129064311.272422-1-acelan.kao@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/mtd/nand/spi/core.c

@@ -974,7 +974,7 @@ static int spinand_manufacturer_match(struct spinand_device *spinand,
 		spinand->manufacturer = manufacturer;
 		return 0;
 	}
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static int spinand_id_detect(struct spinand_device *spinand)

drivers/mtd/spi-nor/core.c

@@ -3146,7 +3146,7 @@ int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 	int ret;
 
 	ret = params->set_4byte_addr_mode(nor, enable);
-	if (ret && ret != -ENOTSUPP)
+	if (ret && ret != -EOPNOTSUPP)
 		return ret;
 
 	if (enable) {

drivers/spi/atmel-quadspi.c

@@ -272,7 +272,7 @@ static int atmel_qspi_find_mode(const struct spi_mem_op *op)
 		if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i]))
 			return i;
 
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static bool atmel_qspi_supports_op(struct spi_mem *mem,

drivers/spi/spi-ath79.c

@@ -146,7 +146,7 @@ static int ath79_exec_mem_op(struct spi_mem *mem,
 	/* Only use for fast-read op. */
 	if (op->cmd.opcode != 0x0b || op->data.dir != SPI_MEM_DATA_IN ||
 	    op->addr.nbytes != 3 || op->dummy.nbytes != 1)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* disable GPIO mode */
 	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);

drivers/spi/spi-bcm-qspi.c

@@ -1199,7 +1199,7 @@ static int bcm_qspi_exec_mem_op(struct spi_mem *mem,
 
 	if (!op->data.nbytes || !op->addr.nbytes || op->addr.nbytes > 4 ||
 	    op->data.dir != SPI_MEM_DATA_IN)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	buf = op->data.buf.in;
 	addr = op->addr.val;

drivers/spi/spi-mem.c

@@ -323,7 +323,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		return ret;
 
 	if (!spi_mem_internal_supports_op(mem, op))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (ctlr->mem_ops && ctlr->mem_ops->exec_op && !spi_get_csgpiod(mem->spi, 0)) {
 		ret = spi_mem_access_start(mem);
@@ -339,7 +339,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		 * read path) and expect the core to use the regular SPI
 		 * interface in other cases.
 		 */
-		if (!ret || ret != -ENOTSUPP)
+		if (!ret || ret != -ENOTSUPP || ret != -EOPNOTSUPP)
 			return ret;
 	}
 
@@ -559,7 +559,7 @@ spi_mem_dirmap_create(struct spi_mem *mem,
 	if (ret) {
 		desc->nodirmap = true;
 		if (!spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
-			ret = -ENOTSUPP;
+			ret = -EOPNOTSUPP;
 		else
 			ret = 0;
 	}

drivers/spi/spi-npcm-fiu.c

@@ -556,7 +556,7 @@ static int npcm_fiu_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		op->data.nbytes);
 
 	if (fiu->spix_mode || op->addr.nbytes > 4)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (fiu->clkrate != chip->clkrate) {
 		ret = clk_set_rate(fiu->clk, chip->clkrate);

drivers/spi/spi-ti-qspi.c

@@ -613,12 +613,12 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 	/* Only optimize read path. */
 	if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
 	    !op->addr.nbytes || op->addr.nbytes > 4)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* Address exceeds MMIO window size, fall back to regular mode. */
 	from = op->addr.val;
 	if (from + op->data.nbytes > qspi->mmap_size)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&qspi->list_lock);
 

drivers/spi/spi-wpcm-fiu.c

@@ -361,7 +361,7 @@ static int wpcm_fiu_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 
 	wpcm_fiu_stall_host(fiu, false);
 
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static int wpcm_fiu_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)

include/linux/spi/spi-mem.h

@@ -233,6 +233,8 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
  *		    limitations)
  * @supports_op: check if an operation is supported by the controller
  * @exec_op: execute a SPI memory operation
+ *           not all driver provides supports_op(), so it can return -EOPNOTSUPP
+ *           if the op is not supported by the driver/controller
  * @get_name: get a custom name for the SPI mem device from the controller.
  *	      This might be needed if the controller driver has been ported
  *	      to use the SPI mem layer and a custom name is used to keep