net: sxgbe: remove eee_enabled/eee_active in sxgbe_get_eee()

sxgbe_get_eee() sets edata->eee_active and edata->eee_enabled from its
own copy, and then calls phy_ethtool_get_eee() which in turn will call
genphy_c45_ethtool_get_eee().

genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active
with its own interpretation from the PHYs settings and negotiation
result.

Therefore, setting these members in sxgbe_get_eee() is redundant.
Remove this, and remove the priv->eee_active member which then becomes
a write-only variable.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rWbMx-002cCb-IU@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/samsung/sxgbe/sxgbe_common.h

@@ -503,7 +503,6 @@ struct sxgbe_priv_data {
 	bool tx_path_in_lpi_mode;
 	int lpi_irq;
 	int eee_enabled;
-	int eee_active;
 	int tx_lpi_timer;
 };
 

drivers/net/ethernet/samsung/sxgbe/sxgbe_ethtool.c

@@ -140,8 +140,6 @@ static int sxgbe_get_eee(struct net_device *dev,
 	if (!priv->hw_cap.eee)
 		return -EOPNOTSUPP;
 
-	edata->eee_enabled = priv->eee_enabled;
-	edata->eee_active = priv->eee_active;
 	edata->tx_lpi_timer = priv->tx_lpi_timer;
 
 	return phy_ethtool_get_eee(dev->phydev, edata);

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

@@ -130,7 +130,6 @@ bool sxgbe_eee_init(struct sxgbe_priv_data * const priv)
 		if (phy_init_eee(ndev->phydev, true))
 			return false;
 
-		priv->eee_active = 1;
 		timer_setup(&priv->eee_ctrl_timer, sxgbe_eee_ctrl_timer, 0);
 		priv->eee_ctrl_timer.expires = SXGBE_LPI_TIMER(eee_timer);
 		add_timer(&priv->eee_ctrl_timer);