drm/i915: Convert gmch platforms over to ilk_crtc_{enable, disable}_planes()

Use the same code for enabling/disabling planes on all platforms. Rename
the functions to reflect that they're no longer specific to any
platform.

For now we leave the plane enable/disable to ccur at the same old
position in the modeset sequence.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Frob drm_vblank_on conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -3634,7 +3634,49 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
 		hsw_enable_ips(intel_crtc);
 }
 
-static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
+{
+	if (!enable && intel_crtc->overlay) {
+		struct drm_device *dev = intel_crtc->base.dev;
+		struct drm_i915_private *dev_priv = dev->dev_private;
+
+		mutex_lock(&dev->struct_mutex);
+		dev_priv->mm.interruptible = false;
+		(void) intel_overlay_switch_off(intel_crtc->overlay);
+		dev_priv->mm.interruptible = true;
+		mutex_unlock(&dev->struct_mutex);
+	}
+
+	/* Let userspace switch the overlay on again. In most cases userspace
+	 * has to recompute where to put it anyway.
+	 */
+}
+
+/**
+ * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
+ * cursor plane briefly if not already running after enabling the display
+ * plane.
+ * This workaround avoids occasional blank screens when self refresh is
+ * enabled.
+ */
+static void
+g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	u32 cntl = I915_READ(CURCNTR(pipe));
+
+	if ((cntl & CURSOR_MODE) == 0) {
+		u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
+
+		I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
+		I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
+		intel_wait_for_vblank(dev_priv->dev, pipe);
+		I915_WRITE(CURCNTR(pipe), cntl);
+		I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
+		I915_WRITE(FW_BLC_SELF, fw_bcl_self);
+	}
+}
+
+static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3644,7 +3686,11 @@ static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
 
 	intel_enable_primary_hw_plane(dev_priv, plane, pipe);
 	intel_enable_planes(crtc);
+	/* The fixup needs to happen before cursor is enabled */
+	if (IS_G4X(dev))
+		g4x_fixup_plane(dev_priv, pipe);
 	intel_crtc_update_cursor(crtc, true);
+	intel_crtc_dpms_overlay(intel_crtc, true);
 
 	hsw_enable_ips(intel_crtc);
 
@@ -3653,7 +3699,7 @@ static void ilk_crtc_enable_planes(struct drm_crtc *crtc)
 	mutex_unlock(&dev->struct_mutex);
 }
 
-static void ilk_crtc_disable_planes(struct drm_crtc *crtc)
+static void intel_crtc_disable_planes(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3669,6 +3715,7 @@ static void ilk_crtc_disable_planes(struct drm_crtc *crtc)
 
 	hsw_disable_ips(intel_crtc);
 
+	intel_crtc_dpms_overlay(intel_crtc, false);
 	intel_crtc_update_cursor(crtc, false);
 	intel_disable_planes(crtc);
 	intel_disable_primary_hw_plane(dev_priv, plane, pipe);
@@ -3726,7 +3773,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev))
 		cpt_verify_modeset(dev, intel_crtc->pipe);
 
-	ilk_crtc_enable_planes(crtc);
+	intel_crtc_enable_planes(crtc);
 
 	/*
 	 * There seems to be a race in PCH platform hw (at least on some
@@ -3827,7 +3874,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
-	ilk_crtc_enable_planes(crtc);
+	intel_crtc_enable_planes(crtc);
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -3857,7 +3904,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
-	ilk_crtc_disable_planes(crtc);
+	intel_crtc_disable_planes(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
@@ -3920,7 +3967,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 	if (!intel_crtc->active)
 		return;
 
-	ilk_crtc_disable_planes(crtc);
+	intel_crtc_disable_planes(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		intel_opregion_notify_encoder(encoder, false);
@@ -3966,48 +4013,6 @@ static void haswell_crtc_off(struct drm_crtc *crtc)
 	intel_ddi_put_crtc_pll(crtc);
 }
 
-static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
-{
-	if (!enable && intel_crtc->overlay) {
-		struct drm_device *dev = intel_crtc->base.dev;
-		struct drm_i915_private *dev_priv = dev->dev_private;
-
-		mutex_lock(&dev->struct_mutex);
-		dev_priv->mm.interruptible = false;
-		(void) intel_overlay_switch_off(intel_crtc->overlay);
-		dev_priv->mm.interruptible = true;
-		mutex_unlock(&dev->struct_mutex);
-	}
-
-	/* Let userspace switch the overlay on again. In most cases userspace
-	 * has to recompute where to put it anyway.
-	 */
-}
-
-/**
- * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware
- * cursor plane briefly if not already running after enabling the display
- * plane.
- * This workaround avoids occasional blank screens when self refresh is
- * enabled.
- */
-static void
-g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
-{
-	u32 cntl = I915_READ(CURCNTR(pipe));
-
-	if ((cntl & CURSOR_MODE) == 0) {
-		u32 fw_bcl_self = I915_READ(FW_BLC_SELF);
-
-		I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN);
-		I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX);
-		intel_wait_for_vblank(dev_priv->dev, pipe);
-		I915_WRITE(CURCNTR(pipe), cntl);
-		I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe)));
-		I915_WRITE(FW_BLC_SELF, fw_bcl_self);
-	}
-}
-
 static void i9xx_pfit_enable(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -4311,7 +4316,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
 	bool is_dsi;
 
 	WARN_ON(!crtc->enabled);
@@ -4343,11 +4347,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	intel_wait_for_vblank(dev_priv->dev, pipe);
 	intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
 
-	intel_enable_primary_hw_plane(dev_priv, plane, pipe);
-	intel_enable_planes(crtc);
-	intel_crtc_update_cursor(crtc, true);
-
-	intel_update_fbc(dev);
+	intel_crtc_enable_planes(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
@@ -4360,7 +4360,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
 
 	WARN_ON(!crtc->enabled);
 
@@ -4384,17 +4383,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	intel_wait_for_vblank(dev_priv->dev, pipe);
 	intel_set_cpu_fifo_underrun_reporting(dev, pipe, true);
 
-	intel_enable_primary_hw_plane(dev_priv, plane, pipe);
-	intel_enable_planes(crtc);
-	/* The fixup needs to happen before cursor is enabled */
-	if (IS_G4X(dev))
-		g4x_fixup_plane(dev_priv, pipe);
-	intel_crtc_update_cursor(crtc, true);
-
-	/* Give the overlay scaler a chance to enable if it's on this pipe */
-	intel_crtc_dpms_overlay(intel_crtc, true);
-
-	intel_update_fbc(dev);
+	intel_crtc_enable_planes(crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
@@ -4422,7 +4411,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
-	int plane = intel_crtc->plane;
 
 	if (!intel_crtc->active)
 		return;
@@ -4430,17 +4418,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
-	/* Give the overlay scaler a chance to disable if it's on this pipe */
-	intel_crtc_wait_for_pending_flips(crtc);
-	drm_vblank_off(dev, pipe);
-
-	if (dev_priv->fbc.plane == plane)
-		intel_disable_fbc(dev);
-
-	intel_crtc_dpms_overlay(intel_crtc, false);
-	intel_crtc_update_cursor(crtc, false);
-	intel_disable_planes(crtc);
-	intel_disable_primary_hw_plane(dev_priv, plane, pipe);
+	intel_crtc_disable_planes(crtc);
 
 	intel_set_cpu_fifo_underrun_reporting(dev, pipe, false);
 	intel_disable_pipe(dev_priv, pipe);