Merge tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The core work this time around has mostly been around the code to
  manage regulator modes, simplifying the interface for configuring
  modes to not take account of the voltage and as a side effect
  resolving a bootstrapping issue on systems where we can't read the
  voltage from the regulator.

  Otherwise it's been quite a quiet release with some new drivers and a
  devm helper:

   - Make the load handling in the Qualcomm RPMH regulators much more
     idiomatic and general cleanups to the handling of load
     configuration

   - devm helper for a combined get and enable operation

   - Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
     Instruments TPS65219"

* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
  dt-bindings: gpio-regulator: add vin-supply property support
  regulator: gpio: Add input_supply support in gpio_regulator_config
  regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
  regulator: qcom,rpmh: add pm660 and pm660l pmics
  regulator: qcom-rpmh: add pm660 and pm660l pmics
  regulator: of: Fix kernel-doc
  regulator: of: Fix kernel-doc
  regulator: Add driver for MT6332 PMIC regulators
  regulator: Add bindings for MT6332 regulator
  regulator: Add driver for MT6331 PMIC regulators
  regulator: Add bindings for MT6331 regulator
  regulator: tps65219: Fix .bypass_val_on setting
  regulator: qcom_rpm: Fix circular deferral regression
  regulator: core: Prevent integer underflow
  regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
  regulator: bd9576: switch to using devm_fwnode_gpiod_get()
  regulator: bd71815: switch to using devm_fwnode_gpiod_get()
  regulator: core: Fix regulator supply registration with sysfs
  regulator: tps65219: change tps65219_regulator_irq_types to static
  regulator: core: Don't err if allow-set-load but no allowed-modes
  ...

Documentation/devicetree/bindings/regulator/dlg,da9121.yaml

@@ -83,6 +83,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description: |
       List of regulators provided by the device
 

Documentation/devicetree/bindings/regulator/gpio-regulator.yaml

@@ -85,6 +85,9 @@ properties:
       - current
     default: voltage
 
+  vin-supply:
+    description: Input supply phandle.
+
 required:
   - compatible
   - regulator-name

Documentation/devicetree/bindings/regulator/maxim,max77802.yaml

@@ -79,6 +79,7 @@ patternProperties:
     patternProperties:
       regulator-state-(standby|mem|disk):
         type: object
+        additionalProperties: true
         properties:
           regulator-mode: false
 

Documentation/devicetree/bindings/regulator/maxim,max8997.yaml

@@ -111,6 +111,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6331 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators
+  and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6331 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(avdd32aud|auxa32)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(avdd32aud|auxa32)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vcam(a|af|d|io)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcam(a|af|d|io)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vtcxo[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vtcxo[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo-vgp[1234]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vgp[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6331_vdvfs11_reg: buck-vdvfs11 {
+          regulator-name = "vdvfs11";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs12_reg: buck-vdvfs12 {
+          regulator-name = "vdvfs12";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs13_reg: buck-vdvfs13 {
+          regulator-name = "vdvfs13";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs14_reg: buck-vdvfs14 {
+          regulator-name = "vdvfs14";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vcore2_reg: buck-vcore2 {
+          regulator-name = "vcore2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vio18_reg: buck-vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vtcxo1_reg: ldo-vtcxo1 {
+          regulator-name = "vtcxo1";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vtcxo2_reg: ldo-vtcxo2 {
+          regulator-name = "vtcxo2";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_avdd32_aud_reg: ldo-avdd32aud {
+          regulator-name = "avdd32_aud";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vauxa32_reg: ldo-vauxa32 {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vio28_reg: ldo-vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vcamaf_reg: ldo-vcamaf {
+          regulator-name = "vcam_af";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vemc33_reg: ldo-vemc33 {
+          regulator-name = "vemc33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp1_reg: ldo-vgp1 {
+          regulator-name = "vgp1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vmipi_reg: ldo-vmipi {
+          regulator-name = "vmipi";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp4_reg: ldo-vgp4 {
+          regulator-name = "vgp4";
+          regulator-min-microvolt = <1600000>;
+          regulator-max-microvolt = <2200000>;
+        };
+        mt6331_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1500000>;
+        };
+        mt6331_vusb10_reg: ldo-vusb10 {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-boot-on;
+        };
+        mt6331_vcamio_reg: ldo-vcamio {
+          regulator-name = "vcam_io";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vsram_reg: ldo-vsram {
+          regulator-name = "vsram";
+          regulator-min-microvolt = <1012500>;
+          regulator-max-microvolt = <1012500>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vgp2_reg: ldo-vgp2 {
+          regulator-name = "vgp2";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1500000>;
+          regulator-boot-on;
+        };
+        mt6331_vgp3_reg: ldo-vgp3 {
+          regulator-name = "vgp3";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vrtc_reg: ldo-vrtc {
+          regulator-name = "vrtc";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vdig18_reg: ldo-vdig18 {
+          regulator-name = "dvdd18_dig";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+      };
+    };
+...

Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6332 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout)
+  regulators and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6332 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(bif28|dig18|sram|usb33)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(bif28|dig18|sram|usb33)$"
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6332_vdram_reg: buck-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-allowed-modes = <0 1>;
+          regulator-always-on;
+        };
+        mt6332_vdvfs2_reg: buck-vdvfs2 {
+          regulator-name = "vdvfs2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3400000>;
+        };
+        mt6332_vrf18a_reg: buck-vrf18a {
+          regulator-name = "vrf18a";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vrf18b_reg: buck-vrf18b {
+          regulator-name = "vrf18b";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vsbst_reg: buck-vsbst {
+          regulator-name = "vsbst";
+          regulator-min-microvolt = <3500000>;
+          regulator-max-microvolt = <7468750>;
+        };
+        mt6332_vauxb32_reg: ldo-vauxb32 {
+          regulator-name = "vauxb32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6332_vbif28_reg: ldo-vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+        };
+        mt6332_vdig18_reg: ldo-vdig18 {
+          regulator-name = "vdig18";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-always-on;
+        };
+        mt6332_vsram_reg: ldo-vsram {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-always-on;
+        };
+        mt6332_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
+...

Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml

@@ -29,6 +29,7 @@ properties:
       "^vbuck[1-4]$":
         type: object
         $ref: "regulator.yaml#"
+        unevaluatedProperties: false
 
         properties:
           regulator-compatible:

Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml

@@ -37,6 +37,8 @@ description: |
       For PM6150, smps1 - smps5, ldo1 - ldo19
       For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
       For PM6350, smps1 - smps5, ldo1 - ldo22
+      For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19
+      For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
@@ -57,6 +59,8 @@ properties:
       - qcom,pm6150-rpmh-regulators
       - qcom,pm6150l-rpmh-regulators
       - qcom,pm6350-rpmh-regulators
+      - qcom,pm660-rpmh-regulators
+      - qcom,pm660l-rpmh-regulators
       - qcom,pm7325-rpmh-regulators
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
@@ -99,12 +103,16 @@ properties:
     type: object
     $ref: "regulator.yaml#"
     description: BOB regulator node.
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
 
 patternProperties:
   "^(smps|ldo|lvs)[0-9]+$":
     type: object
     $ref: "regulator.yaml#"
     description: smps/ldo regulator nodes(s).
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
 
 required:
   - compatible
@@ -144,6 +152,38 @@ allOf:
       patternProperties:
         "^vdd-s[1-8]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l6-l7-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l5-supply: true
+        vdd-l8-l9-l10-l11-l12-l13-l14-supply: true
+        vdd-l15-l16-l17-l18-l19-supply: true
+      patternProperties:
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l9-l10-supply: true
+        vdd-l2-supply: true
+        vdd-l3-l5-l7-l8-supply: true
+        vdd-l4-l6-supply: true
+        vdd-s3-s4-supply: true
+      patternProperties:
+        "^vdd-s[125]-supply$": true
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml

@@ -24,6 +24,17 @@ description:
 
   For mp5496, s2
 
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
   For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
   l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
   l26, l27, l28, lvs1
@@ -52,11 +63,6 @@ description:
   l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
 
-  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
-  l12, l13, l14, l15, l16, l17, l18, l19
-
-  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
-
   For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
   l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
@@ -68,9 +74,6 @@ description:
   For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13
 
-  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
-
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -79,6 +82,10 @@ properties:
   compatible:
     enum:
       - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8909-regulators
@@ -88,13 +95,10 @@ properties:
       - qcom,rpm-pm8953-regulators
       - qcom,rpm-pm8994-regulators
       - qcom,rpm-pm8998-regulators
-      - qcom,rpm-pm660-regulators
-      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pma8084-regulators
       - qcom,rpm-pmi8994-regulators
       - qcom,rpm-pmi8998-regulators
       - qcom,rpm-pms405-regulators
-      - qcom,rpm-pm2250-regulators
 
 patternProperties:
   ".*-supply$":

Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml

@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,pm6125-regulators
       - qcom,pm660-regulators
       - qcom,pm660l-regulators
       - qcom,pm8004-regulators
@@ -105,6 +106,25 @@ required:
   - compatible
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -120,6 +140,7 @@ allOf:
         vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -134,6 +155,7 @@ allOf:
         vdd_l4_l6-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -143,6 +165,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[25]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -152,6 +175,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -171,6 +195,7 @@ allOf:
         vdd_lvs1-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -180,6 +205,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -195,6 +221,7 @@ allOf:
       patternProperties:
         "^vdd_l[27]-supply$": true
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -223,6 +250,7 @@ allOf:
         vin_5vs-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -241,6 +269,7 @@ allOf:
         vdd_l9_l10_l13_l14_l15_l18-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -265,6 +294,7 @@ allOf:
         vdd_lvs_1_2-supply: true
       patternProperties:
         "^vdd_s[1-9][0-2]?-supply$": true
+
   - if:
       properties:
         compatible:
@@ -276,6 +306,7 @@ allOf:
         vdd_l1-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -291,6 +322,7 @@ allOf:
       patternProperties:
         "^vdd_l[479]-supply$": true
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

@@ -20,6 +20,7 @@ properties:
 
   lab:
     type: object
+    additionalProperties: false
 
     properties:
       qcom,soft-start-us:
@@ -33,11 +34,19 @@ properties:
         description:
           Short-circuit and over-current interrupts for lab.
 
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
     required:
       - interrupts
+      - interrupt-names
 
   ibb:
     type: object
+    additionalProperties: false
 
     properties:
       qcom,discharge-resistor-kohms:
@@ -52,8 +61,15 @@ properties:
         description:
           Short-circuit and over-current interrupts for ibb.
 
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
     required:
       - interrupts
+      - interrupt-names
 
 required:
   - compatible

Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml

@@ -42,6 +42,7 @@ patternProperties:
   "^DSV(P|N)$":
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
     description:
       Properties for single display bias regulator.
 

Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml

@@ -27,6 +27,7 @@ properties:
     description:
       properties for wled regulator
     $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       regulator-name:

Documentation/devicetree/bindings/regulator/ti,tps65219.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI tps65219 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Jerome Neanne <jerome.neanne@baylibre.com>
+
+description: |
+  Regulator nodes should be named to buck<number> and ldo<number>.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65219
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: Optional property that indicates that this device is
+      controlling system power.
+
+  interrupts:
+    description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 1
+
+  ti,power-button:
+    type: boolean
+    description: |
+      Optional property that sets the EN/PB/VSENSE pin to be a
+      power-button.
+      TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either
+      1. EN in which case it functions as an enable pin.
+      2. VSENSE which compares the voltages and triggers an automatic
+      on/off request.
+      3. PB in which case it can be configured to trigger an interrupt
+      to the SoC.
+      ti,power-button reflects the last one of those options
+      where the board has a button wired to the pin and triggers
+      an interrupt on pressing it.
+
+patternProperties:
+  "^buck[1-3]-supply$":
+    description: Input supply phandle of one regulator.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle of one regulator.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps65219: pmic@30 {
+            compatible = "ti,tps65219";
+            reg = <0x30>;
+            buck1-supply = <&vcc_3v3_sys>;
+            buck2-supply = <&vcc_3v3_sys>;
+            buck3-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&buck2_reg>;
+            ldo3-supply = <&vcc_3v3_sys>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            pinctrl-0 = <&pmic_irq_pins_default>;
+
+            interrupt-parent = <&gic500>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            ti,power-button;
+
+            regulators {
+                buck1_reg: buck1 {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "VCC1V8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "VDD_LPDDR4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1_reg: ldo1 {
+                    regulator-name = "VDDSHV_SD_IO_PMIC";
+                    regulator-min-microvolt = <33000000>;
+                    regulator-max-microvolt = <33000000>;
+                };
+
+                ldo2_reg: ldo2 {
+                    regulator-name = "VDDAR_CORE";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3_reg: ldo3 {
+                    regulator-name = "VDDA_1V8";
+                    regulator-min-microvolt = <18000000>;
+                    regulator-max-microvolt = <18000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4_reg: ldo4 {
+                    regulator-name = "VDD_PHY_2V5";
+                    regulator-min-microvolt = <25000000>;
+                    regulator-max-microvolt = <25000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };

Documentation/driver-api/driver-model/devres.rst

@@ -407,10 +407,21 @@ PWM
   devm_fwnode_pwm_get()
 
 REGULATOR
+  devm_regulator_bulk_register_supply_alias()
   devm_regulator_bulk_get()
+  devm_regulator_bulk_get_enable()
+  devm_regulator_bulk_put()
   devm_regulator_get()
+  devm_regulator_get_enable()
+  devm_regulator_get_enable_optional()
+  devm_regulator_get_exclusive()
+  devm_regulator_get_optional()
+  devm_regulator_irq_helper()
   devm_regulator_put()
   devm_regulator_register()
+  devm_regulator_register_notifier()
+  devm_regulator_register_supply_alias()
+  devm_regulator_unregister_notifier()
 
 RESET
   devm_reset_control_get()

MAINTAINERS

@@ -14957,6 +14957,7 @@ F:	drivers/regulator/palmas-regulator*.c
 F:	drivers/regulator/pbias-regulator.c
 F:	drivers/regulator/tps65217-regulator.c
 F:	drivers/regulator/tps65218-regulator.c
+F:	drivers/regulator/tps65219-regulator.c
 F:	drivers/regulator/tps65910-regulator.c
 F:	drivers/regulator/twl-regulator.c
 F:	drivers/regulator/twl6030-regulator.c

drivers/regulator/Kconfig

@@ -787,6 +787,24 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6331
+	tristate "MediaTek MT6331 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6331 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
+config REGULATOR_MT6332
+	tristate "MediaTek MT6332 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6332 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
 config REGULATOR_MT6358
 	tristate "MediaTek MT6358 PMIC"
 	depends on MFD_MT6397
@@ -1384,6 +1402,15 @@ config REGULATOR_TPS65218
 	  voltage regulators. It supports software based voltage control
 	  for different voltage domains
 
+config REGULATOR_TPS65219
+	tristate "TI TPS65219 Power regulators"
+	depends on MFD_TPS65219 && OF
+	help
+	  This driver supports TPS65219 voltage regulator chips.
+	  TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains.
+
 config REGULATOR_TPS6524X
 	tristate "TI TPS6524X Power regulators"
 	depends on SPI

drivers/regulator/Makefile

@@ -95,6 +95,8 @@ obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6331)	+= mt6331-regulator.o
+obj-$(CONFIG_REGULATOR_MT6332)	+= mt6332-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6359)	+= mt6359-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
@@ -162,6 +164,7 @@ obj-$(CONFIG_REGULATOR_TPS65086) += tps65086-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65218) += tps65218-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65219) += tps65219-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o

drivers/regulator/bd71815-regulator.c

@@ -571,11 +571,10 @@ static int bd7181x_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "No parent regmap\n");
 		return -ENODEV;
 	}
-	ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev,
-					      pdev->dev.parent->of_node,
-						 "rohm,vsel-gpios", 0,
-						 GPIOD_ASIS, "ldo4-en");
 
+	ldo4_en = devm_fwnode_gpiod_get(&pdev->dev,
+					dev_fwnode(pdev->dev.parent),
+					"rohm,vsel", GPIOD_ASIS, "ldo4-en");
 	if (IS_ERR(ldo4_en)) {
 		ret = PTR_ERR(ldo4_en);
 		if (ret != -ENOENT)

drivers/regulator/bd9576-regulator.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
@@ -939,8 +940,8 @@ static int bd957x_probe(struct platform_device *pdev)
 	}
 
 	ic_data->regmap = regmap;
-	vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
-					 "rohm,vout1-en-low");
+	vout_mode = device_property_read_bool(pdev->dev.parent,
+					      "rohm,vout1-en-low");
 	if (vout_mode) {
 		struct gpio_desc *en;
 
@@ -948,10 +949,10 @@ static int bd957x_probe(struct platform_device *pdev)
 
 		/* VOUT1 enable state judged by VOUT1_EN pin */
 		/* See if we have GPIO defined */
-		en = devm_gpiod_get_from_of_node(&pdev->dev,
-						 pdev->dev.parent->of_node,
-						 "rohm,vout1-en-gpios", 0,
-						 GPIOD_OUT_LOW, "vout1-en");
+		en = devm_fwnode_gpiod_get(&pdev->dev,
+					   dev_fwnode(pdev->dev.parent),
+					   "rohm,vout1-en", GPIOD_OUT_LOW,
+					   "vout1-en");
 		if (!IS_ERR(en)) {
 			/* VOUT1_OPS gpio ctrl */
 			/*
@@ -986,8 +987,8 @@ static int bd957x_probe(struct platform_device *pdev)
 	 * like DDR voltage selection.
 	 */
 	platform_set_drvdata(pdev, ic_data);
-	ddr_sel =  of_property_read_bool(pdev->dev.parent->of_node,
-					 "rohm,ddr-sel-low");
+	ddr_sel = device_property_read_bool(pdev->dev.parent,
+					    "rohm,ddr-sel-low");
 	if (ddr_sel)
 		ic_data->regulator_data[2].desc.fixed_uV = 1350000;
 	else

drivers/regulator/core.c

@@ -977,12 +977,27 @@ static int drms_uA_update(struct regulator_dev *rdev)
 			rdev_err(rdev, "failed to set load %d: %pe\n",
 				 current_uA, ERR_PTR(err));
 	} else {
+		/*
+		 * Unfortunately in some cases the constraints->valid_ops has
+		 * REGULATOR_CHANGE_DRMS but there are no valid modes listed.
+		 * That's not really legit but we won't consider it a fatal
+		 * error here. We'll treat it as if REGULATOR_CHANGE_DRMS
+		 * wasn't set.
+		 */
+		if (!rdev->constraints->valid_modes_mask) {
+			rdev_dbg(rdev, "Can change modes; but no valid mode\n");
+			return 0;
+		}
+
 		/* get output voltage */
 		output_uV = regulator_get_voltage_rdev(rdev);
-		if (output_uV <= 0) {
-			rdev_err(rdev, "invalid output voltage found\n");
-			return -EINVAL;
-		}
+
+		/*
+		 * Don't return an error; if regulator driver cares about
+		 * output_uV then it's up to the driver to validate.
+		 */
+		if (output_uV <= 0)
+			rdev_dbg(rdev, "invalid output voltage found\n");
 
 		/* get input voltage */
 		input_uV = 0;
@@ -990,10 +1005,13 @@ static int drms_uA_update(struct regulator_dev *rdev)
 			input_uV = regulator_get_voltage(rdev->supply);
 		if (input_uV <= 0)
 			input_uV = rdev->constraints->input_uV;
-		if (input_uV <= 0) {
-			rdev_err(rdev, "invalid input voltage found\n");
-			return -EINVAL;
-		}
+
+		/*
+		 * Don't return an error; if regulator driver cares about
+		 * input_uV then it's up to the driver to validate.
+		 */
+		if (input_uV <= 0)
+			rdev_dbg(rdev, "invalid input voltage found\n");
 
 		/* now get the optimum mode for our new total regulator load */
 		mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
@@ -2681,7 +2699,7 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
 	 * return -ETIMEDOUT.
 	 */
 	if (rdev->desc->poll_enabled_time) {
-		unsigned int time_remaining = delay;
+		int time_remaining = delay;
 
 		while (time_remaining > 0) {
 			_regulator_delay_helper(rdev->desc->poll_enabled_time);
@@ -3502,10 +3520,8 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
 		 (new_uV < old_uV))
 		return rdev->constraints->settling_time_down;
 
-	if (ramp_delay == 0) {
-		rdev_dbg(rdev, "ramp_delay not set\n");
+	if (ramp_delay == 0)
 		return 0;
-	}
 
 	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
 }
@@ -5398,6 +5414,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	bool dangling_of_gpiod = false;
 	struct device *dev;
 	int ret, i;
+	bool resolved_early = false;
 
 	if (cfg == NULL)
 		return ERR_PTR(-EINVAL);
@@ -5501,24 +5518,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
 	INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
 
-	/* preform any regulator specific init */
-	if (init_data && init_data->regulator_init) {
-		ret = init_data->regulator_init(rdev->reg_data);
-		if (ret < 0)
-			goto clean;
-	}
-
-	if (config->ena_gpiod) {
-		ret = regulator_ena_gpio_request(rdev, config);
-		if (ret != 0) {
-			rdev_err(rdev, "Failed to request enable GPIO: %pe\n",
-				 ERR_PTR(ret));
-			goto clean;
-		}
-		/* The regulator core took over the GPIO descriptor */
-		dangling_cfg_gpiod = false;
-		dangling_of_gpiod = false;
-	}
+	if (init_data && init_data->supply_regulator)
+		rdev->supply_name = init_data->supply_regulator;
+	else if (regulator_desc->supply_name)
+		rdev->supply_name = regulator_desc->supply_name;
 
 	/* register with sysfs */
 	rdev->dev.class = &regulator_class;
@@ -5540,13 +5543,38 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		goto wash;
 	}
 
-	if (init_data && init_data->supply_regulator)
-		rdev->supply_name = init_data->supply_regulator;
-	else if (regulator_desc->supply_name)
-		rdev->supply_name = regulator_desc->supply_name;
+	if ((rdev->supply_name && !rdev->supply) &&
+		(rdev->constraints->always_on ||
+		 rdev->constraints->boot_on)) {
+		ret = regulator_resolve_supply(rdev);
+		if (ret)
+			rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
+					 ERR_PTR(ret));
+
+		resolved_early = true;
+	}
+
+	/* perform any regulator specific init */
+	if (init_data && init_data->regulator_init) {
+		ret = init_data->regulator_init(rdev->reg_data);
+		if (ret < 0)
+			goto wash;
+	}
+
+	if (config->ena_gpiod) {
+		ret = regulator_ena_gpio_request(rdev, config);
+		if (ret != 0) {
+			rdev_err(rdev, "Failed to request enable GPIO: %pe\n",
+				 ERR_PTR(ret));
+			goto wash;
+		}
+		/* The regulator core took over the GPIO descriptor */
+		dangling_cfg_gpiod = false;
+		dangling_of_gpiod = false;
+	}
 
 	ret = set_machine_constraints(rdev);
-	if (ret == -EPROBE_DEFER) {
+	if (ret == -EPROBE_DEFER && !resolved_early) {
 		/* Regulator might be in bypass mode and so needs its supply
 		 * to set the constraints
 		 */

drivers/regulator/devres.c

@@ -70,6 +70,65 @@ struct regulator *devm_regulator_get_exclusive(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_regulator_get_exclusive);
 
+static void regulator_action_disable(void *d)
+{
+	struct regulator *r = (struct regulator *)d;
+
+	regulator_disable(r);
+}
+
+static int _devm_regulator_get_enable(struct device *dev, const char *id,
+				      int get_type)
+{
+	struct regulator *r;
+	int ret;
+
+	r = _devm_regulator_get(dev, id, get_type);
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	ret = regulator_enable(r);
+	if (!ret)
+		ret = devm_add_action_or_reset(dev, &regulator_action_disable, r);
+
+	if (ret)
+		devm_regulator_put(r);
+
+	return ret;
+}
+
+/**
+ * devm_regulator_get_enable_optional - Resource managed regulator get and enable
+ * @dev: device to supply
+ * @id:  supply name or regulator ID.
+ *
+ * Get and enable regulator for duration of the device life-time.
+ * regulator_disable() and regulator_put() are automatically called on driver
+ * detach. See regulator_get_optional() and regulator_enable() for more
+ * information.
+ */
+int devm_regulator_get_enable_optional(struct device *dev, const char *id)
+{
+	return _devm_regulator_get_enable(dev, id, OPTIONAL_GET);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_get_enable_optional);
+
+/**
+ * devm_regulator_get_enable - Resource managed regulator get and enable
+ * @dev: device to supply
+ * @id:  supply name or regulator ID.
+ *
+ * Get and enable regulator for duration of the device life-time.
+ * regulator_disable() and regulator_put() are automatically called on driver
+ * detach. See regulator_get() and regulator_enable() for more
+ * information.
+ */
+int devm_regulator_get_enable(struct device *dev, const char *id)
+{
+	return _devm_regulator_get_enable(dev, id, NORMAL_GET);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_get_enable);
+
 /**
  * devm_regulator_get_optional - Resource managed regulator_get_optional()
  * @dev: device to supply
@@ -194,6 +253,111 @@ int devm_regulator_bulk_get_const(struct device *dev, int num_consumers,
 }
 EXPORT_SYMBOL_GPL(devm_regulator_bulk_get_const);
 
+static int devm_regulator_bulk_match(struct device *dev, void *res,
+				     void *data)
+{
+	struct regulator_bulk_devres *match = res;
+	struct regulator_bulk_data *target = data;
+
+	/*
+	 * We check the put uses same consumer list as the get did.
+	 * We _could_ scan all entries in consumer array and check the
+	 * regulators match but ATM I don't see the need. We can change this
+	 * later if needed.
+	 */
+	return match->consumers == target;
+}
+
+/**
+ * devm_regulator_bulk_put - Resource managed regulator_bulk_put()
+ * @consumers: consumers to free
+ *
+ * Deallocate regulators allocated with devm_regulator_bulk_get(). Normally
+ * this function will not need to be called and the resource management
+ * code will ensure that the resource is freed.
+ */
+void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
+{
+	int rc;
+	struct regulator *regulator = consumers[0].consumer;
+
+	rc = devres_release(regulator->dev, devm_regulator_bulk_release,
+			    devm_regulator_bulk_match, consumers);
+	if (rc != 0)
+		WARN_ON(rc);
+}
+EXPORT_SYMBOL_GPL(devm_regulator_bulk_put);
+
+static void devm_regulator_bulk_disable(void *res)
+{
+	struct regulator_bulk_devres *devres = res;
+	int i;
+
+	for (i = 0; i < devres->num_consumers; i++)
+		regulator_disable(devres->consumers[i].consumer);
+}
+
+/**
+ * devm_regulator_bulk_get_enable - managed get'n enable multiple regulators
+ *
+ * @dev:           device to supply
+ * @num_consumers: number of consumers to register
+ * @id:            list of supply names or regulator IDs
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation with management, the regulators will
+ * automatically be freed when the device is unbound.  If any of the
+ * regulators cannot be acquired then any regulators that were
+ * allocated will be freed before returning to the caller.
+ */
+int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
+				   const char * const *id)
+{
+	struct regulator_bulk_devres *devres;
+	struct regulator_bulk_data *consumers;
+	int i, ret;
+
+	devres = devm_kmalloc(dev, sizeof(*devres), GFP_KERNEL);
+	if (!devres)
+		return -ENOMEM;
+
+	devres->consumers = devm_kcalloc(dev, num_consumers, sizeof(*consumers),
+					 GFP_KERNEL);
+	consumers = devres->consumers;
+	if (!consumers)
+		return -ENOMEM;
+
+	devres->num_consumers = num_consumers;
+
+	for (i = 0; i < num_consumers; i++)
+		consumers[i].supply = id[i];
+
+	ret = devm_regulator_bulk_get(dev, num_consumers, consumers);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num_consumers; i++) {
+		ret = regulator_enable(consumers[i].consumer);
+		if (ret)
+			goto unwind;
+	}
+
+	ret = devm_add_action(dev, devm_regulator_bulk_disable, devres);
+	if (!ret)
+		return 0;
+
+unwind:
+	while (--i >= 0)
+		regulator_disable(consumers[i].consumer);
+
+	devm_regulator_bulk_put(consumers);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_regulator_bulk_get_enable);
+
 static void devm_rdev_release(struct device *dev, void *res)
 {
 	regulator_unregister(*(struct regulator_dev **)res);

drivers/regulator/gpio-regulator.c

@@ -220,6 +220,9 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 				 regtype);
 	}
 
+	if (of_find_property(np, "vin-supply", NULL))
+		config->input_supply = "vin";
+
 	return config;
 }
 
@@ -259,6 +262,18 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 
 	drvdata->gpiods = devm_kzalloc(dev, sizeof(struct gpio_desc *),
 				       GFP_KERNEL);
+
+	if (config->input_supply) {
+		drvdata->desc.supply_name = devm_kstrdup(&pdev->dev,
+							 config->input_supply,
+							 GFP_KERNEL);
+		if (!drvdata->desc.supply_name) {
+			dev_err(&pdev->dev,
+				"Failed to allocate input supply\n");
+			return -ENOMEM;
+		}
+	}
+
 	if (!drvdata->gpiods)
 		return -ENOMEM;
 	for (i = 0; i < config->ngpios; i++) {

drivers/regulator/max597x-regulator.c

@@ -137,7 +137,7 @@ static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
 static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
 			   int severity, bool enable)
 {
-	int ret, val, reg;
+	int val, reg;
 	unsigned int vthst, vthfst;
 
 	struct max597x_regulator *data = rdev_get_drvdata(rdev);
@@ -183,9 +183,8 @@ static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
 		val = 0xFF;
 
 	reg = MAX5970_REG_DAC_FAST(rdev_id);
-	ret = regmap_write(rdev->regmap, reg, val);
 
-	return ret;
+	return regmap_write(rdev->regmap, reg, val);
 }
 
 static int max597x_get_status(struct regulator_dev *rdev)

drivers/regulator/mt6331-regulator.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2022 Collabora Ltd.
+// Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+//
+// Based on mt6323-regulator.c,
+//     Copyright (c) 2016 MediaTek Inc.
+//
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6331/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6331-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6331_LDO_MODE_NORMAL	0
+#define MT6331_LDO_MODE_LP	1
+
+/*
+ * MT6331 regulators information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ * @status_reg: Register for regulator enable status where qi unavailable
+ * @status_mask: Mask for querying regulator enable status
+ */
+struct mt6331_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 status_reg;
+	u32 status_mask;
+};
+
+#define MT6331_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.status_mask = 0,						\
+}
+
+#define MT6331_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask)	\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_table_ao_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+	},								\
+}
+
+#define MT6331_LDO_S(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		     vosel_mask, _modeset_reg, _modeset_mask,		\
+		     _status_reg, _status_mask)				\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6331_volt_table_no_qi_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_reg = _status_reg,					\
+	.status_mask = _status_mask,					\
+}
+
+#define MT6331_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		   vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = (_modeset_reg ?					\
+			&mt6331_volt_table_ops :			\
+			&mt6331_volt_table_no_ms_ops),			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6331_REG_FIXED(match, vreg, enreg, enbit, qibit, volt,	\
+			 _modeset_reg, _modeset_mask)			\
+[MT6331_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = (_modeset_reg ?					\
+			&mt6331_volt_fixed_ops :			\
+			&mt6331_volt_fixed_no_ms_ops),			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6331_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(qibit),						\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct linear_range buck_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const unsigned int ldo_volt_table1[] = {
+	2800000, 3000000, 0, 3200000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+	1500000, 1800000, 2500000, 2800000,
+};
+
+static const unsigned int ldo_volt_table3[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_volt_table4[] = {
+	0, 0, 1700000, 1800000, 1860000, 2760000, 3000000, 3100000,
+};
+
+static const unsigned int ldo_volt_table5[] = {
+	1800000, 3300000, 1800000, 3300000,
+};
+
+static const unsigned int ldo_volt_table6[] = {
+	3000000, 3300000,
+};
+
+static const unsigned int ldo_volt_table7[] = {
+	1200000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
+};
+
+static const unsigned int ldo_volt_table8[] = {
+	900000, 1000000, 1100000, 1220000, 1300000, 1500000, 1500000, 1500000,
+};
+
+static const unsigned int ldo_volt_table9[] = {
+	1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1300000,
+};
+
+static const unsigned int ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static const unsigned int ldo_volt_table11[] = {
+	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int mt6331_get_status(struct regulator_dev *rdev)
+{
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+	u32 regval;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6331_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6331_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6331_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+}
+
+static unsigned int mt6331_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6331_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	return (val & BIT(0)) ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops mt6331_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+};
+
+static const struct regulator_ops mt6331_volt_table_no_ms_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+};
+
+static const struct regulator_ops mt6331_volt_table_no_qi_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6331_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6331_volt_table_ao_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops mt6331_volt_fixed_no_ms_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+};
+
+static const struct regulator_ops mt6331_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6331_get_status,
+	.set_mode = mt6331_ldo_set_mode,
+	.get_mode = mt6331_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6331_ID_XXX) */
+static struct mt6331_regulator_info mt6331_regulators[] = {
+	MT6331_BUCK("buck-vdvfs11", VDVFS11, 700000, 1493750, 6250,
+		    buck_volt_range, MT6331_VDVFS11_CON9,
+		    MT6331_VDVFS11_CON11, GENMASK(6, 0),
+		    MT6331_VDVFS11_CON12, MT6331_VDVFS11_CON7),
+	MT6331_BUCK("buck-vdvfs12", VDVFS12, 700000, 1493750, 6250,
+		    buck_volt_range, MT6331_VDVFS12_CON9,
+		    MT6331_VDVFS12_CON11, GENMASK(6, 0),
+		    MT6331_VDVFS12_CON12, MT6331_VDVFS12_CON7),
+	MT6331_BUCK("buck-vdvfs13", VDVFS13, 700000, 1493750, 6250,
+		    buck_volt_range, MT6331_VDVFS13_CON9,
+		    MT6331_VDVFS13_CON11, GENMASK(6, 0),
+		    MT6331_VDVFS13_CON12, MT6331_VDVFS13_CON7),
+	MT6331_BUCK("buck-vdvfs14", VDVFS14, 700000, 1493750, 6250,
+		    buck_volt_range, MT6331_VDVFS14_CON9,
+		    MT6331_VDVFS14_CON11, GENMASK(6, 0),
+		    MT6331_VDVFS14_CON12, MT6331_VDVFS14_CON7),
+	MT6331_BUCK("buck-vcore2", VCORE2, 700000, 1493750, 6250,
+		    buck_volt_range, MT6331_VCORE2_CON9,
+		    MT6331_VCORE2_CON11, GENMASK(6, 0),
+		    MT6331_VCORE2_CON12, MT6331_VCORE2_CON7),
+	MT6331_REG_FIXED("buck-vio18", VIO18, MT6331_VIO18_CON9, 0, 13, 1800000, 0, 0),
+	MT6331_REG_FIXED("ldo-vrtc", VRTC, MT6331_DIGLDO_CON11, 8, 15, 2800000, 0, 0),
+	MT6331_REG_FIXED("ldo-vtcxo1", VTCXO1, MT6331_ANALDO_CON1, 10, 15, 2800000,
+			 MT6331_ANALDO_CON1, GENMASK(1, 0)),
+	MT6331_REG_FIXED("ldo-vtcxo2", VTCXO2, MT6331_ANALDO_CON2, 10, 15, 2800000,
+			 MT6331_ANALDO_CON2, GENMASK(1, 0)),
+	MT6331_REG_FIXED("ldo-vsram", VSRAM_DVFS1, MT6331_SYSLDO_CON4, 10, 15, 1012500,
+			 MT6331_SYSLDO_CON4, GENMASK(1, 0)),
+	MT6331_REG_FIXED("ldo-vio28", VIO28, MT6331_DIGLDO_CON1, 10, 15, 2800000,
+			 MT6331_DIGLDO_CON1, GENMASK(1, 0)),
+	MT6331_LDO("ldo-avdd32aud", AVDD32_AUD, ldo_volt_table1, MT6331_ANALDO_CON3, 10,
+		   MT6331_ANALDO_CON10, GENMASK(6, 5), MT6331_ANALDO_CON3, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vauxa32", VAUXA32, ldo_volt_table1, MT6331_ANALDO_CON4, 10,
+		   MT6331_ANALDO_CON6, GENMASK(6, 5), MT6331_ANALDO_CON4, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vemc33", VEMC33, ldo_volt_table6, MT6331_DIGLDO_CON5, 10,
+		   MT6331_DIGLDO_CON17, BIT(6), MT6331_DIGLDO_CON5, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vibr", VIBR, ldo_volt_table3, MT6331_DIGLDO_CON12, 10,
+		   MT6331_DIGLDO_CON20, GENMASK(6, 4), MT6331_DIGLDO_CON12, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vmc", VMC, ldo_volt_table5, MT6331_DIGLDO_CON3, 10,
+		   MT6331_DIGLDO_CON15, GENMASK(5, 4), MT6331_DIGLDO_CON3, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vmch", VMCH, ldo_volt_table6, MT6331_DIGLDO_CON4, 10,
+		   MT6331_DIGLDO_CON16, BIT(6), MT6331_DIGLDO_CON4, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vmipi", VMIPI, ldo_volt_table3, MT6331_SYSLDO_CON5, 10,
+		   MT6331_SYSLDO_CON13, GENMASK(5, 3), MT6331_SYSLDO_CON5, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vsim1", VSIM1, ldo_volt_table4, MT6331_DIGLDO_CON8, 10,
+		   MT6331_DIGLDO_CON21, GENMASK(6, 4), MT6331_DIGLDO_CON8, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vsim2", VSIM2, ldo_volt_table4, MT6331_DIGLDO_CON9, 10,
+		   MT6331_DIGLDO_CON22, GENMASK(6, 4), MT6331_DIGLDO_CON9, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vusb10", VUSB10, ldo_volt_table9, MT6331_SYSLDO_CON2, 10,
+		   MT6331_SYSLDO_CON10, GENMASK(5, 3), MT6331_SYSLDO_CON2, GENMASK(1, 0)),
+	MT6331_LDO("ldo-vcama", VCAMA, ldo_volt_table2, MT6331_ANALDO_CON5, 15,
+		   MT6331_ANALDO_CON9, GENMASK(5, 4), 0, 0),
+	MT6331_LDO_S("ldo-vcamaf", VCAM_AF, ldo_volt_table3, MT6331_DIGLDO_CON2, 10,
+		     MT6331_DIGLDO_CON14, GENMASK(6, 4), MT6331_DIGLDO_CON2, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(0)),
+	MT6331_LDO_S("ldo-vcamd", VCAMD, ldo_volt_table8, MT6331_SYSLDO_CON1, 15,
+		     MT6331_SYSLDO_CON9, GENMASK(6, 4), MT6331_SYSLDO_CON1, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(11)),
+	MT6331_LDO_S("ldo-vcamio", VCAM_IO,  ldo_volt_table10, MT6331_SYSLDO_CON3, 10,
+		     MT6331_SYSLDO_CON11, GENMASK(4, 3), MT6331_SYSLDO_CON3, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(13)),
+	MT6331_LDO_S("ldo-vgp1", VGP1, ldo_volt_table3, MT6331_DIGLDO_CON6, 10,
+		     MT6331_DIGLDO_CON19, GENMASK(6, 4), MT6331_DIGLDO_CON6, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(4)),
+	MT6331_LDO_S("ldo-vgp2", VGP2, ldo_volt_table10, MT6331_SYSLDO_CON6, 10,
+		     MT6331_SYSLDO_CON14, GENMASK(4, 3), MT6331_SYSLDO_CON6, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(15)),
+	MT6331_LDO_S("ldo-vgp3", VGP3, ldo_volt_table10, MT6331_SYSLDO_CON7, 10,
+		     MT6331_SYSLDO_CON15, GENMASK(4, 3), MT6331_SYSLDO_CON7, GENMASK(1, 0),
+		     MT6331_EN_STATUS2, BIT(0)),
+	MT6331_LDO_S("ldo-vgp4", VGP4, ldo_volt_table7, MT6331_DIGLDO_CON7, 10,
+		     MT6331_DIGLDO_CON18, GENMASK(6, 4), MT6331_DIGLDO_CON7, GENMASK(1, 0),
+		     MT6331_EN_STATUS1, BIT(5)),
+	MT6331_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table11,
+		      MT6331_DIGLDO_CON28, GENMASK(14, 12)),
+};
+
+static int mt6331_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6331 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6331_ID_VREG_MAX; i++) {
+		if (mt6331_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6331->regmap,
+				mt6331_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6331_regulators[i].vselctrl_mask) {
+				mt6331_regulators[i].desc.vsel_reg =
+				mt6331_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6331_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6331 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6331_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6331->regmap, MT6331_HWCID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	reg_value &= GENMASK(7, 0);
+
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	/*
+	 * ChipID 0x10 is "MT6331 E1", has a different voltage table and
+	 * it's currently not supported in this driver. Upon detection of
+	 * this ID, refuse to register the regulators, as we will wrongly
+	 * interpret the VSEL for this revision, potentially overvolting
+	 * some device.
+	 */
+	if (reg_value == 0x10) {
+		dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < MT6331_ID_VREG_MAX; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6331_regulators[i];
+		config.regmap = mt6331->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6331_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6331_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6331_platform_ids[] = {
+	{"mt6331-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6331_platform_ids);
+
+static struct platform_driver mt6331_regulator_driver = {
+	.driver = {
+		.name = "mt6331-regulator",
+	},
+	.probe = mt6331_regulator_probe,
+	.id_table = mt6331_platform_ids,
+};
+
+module_platform_driver(mt6331_regulator_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6331 PMIC");
+MODULE_LICENSE("GPL");

drivers/regulator/mt6332-regulator.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2022 Collabora Ltd.
+// Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+//
+// Based on mt6323-regulator.c,
+//     Copyright (c) 2016 MediaTek Inc.
+//
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6332/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6332-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6332_LDO_MODE_NORMAL	0
+#define MT6332_LDO_MODE_LP	1
+
+/*
+ * MT6332 regulators information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ * @status_reg: Register for regulator enable status where qi unavailable
+ * @status_mask: Mask for querying regulator enable status
+ */
+struct mt6332_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 status_reg;
+	u32 status_mask;
+};
+
+#define MT6332_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_buck_volt_range_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_LDO_LINEAR(match, vreg, min, max, step, volt_ranges,	\
+			  enreg, vosel, vosel_mask, voselon,		\
+			  vosel_ctrl, _modeset_reg, _modeset_mask)	\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_ldo_volt_range_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(15),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_LDO_AO(match, vreg, ldo_volt_table, vosel, vosel_mask)	\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_table_ao_ops,			\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+	},								\
+}
+
+#define MT6332_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		   vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+	.status_mask = 0,						\
+}
+
+#define MT6332_REG_FIXED(match, vreg, enreg, enbit, qibit, volt, stbit)	\
+[MT6332_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6332_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6332_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(qibit),						\
+	.status_reg = MT6332_EN_STATUS0,				\
+	.status_mask = BIT(stbit),					\
+}
+
+static const struct linear_range boost_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(3500000, 0, 0x7f, 31250),
+};
+
+static const struct linear_range buck_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_pa_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct linear_range buck_rf_volt_range[] = {
+	REGULATOR_LINEAR_RANGE(1050000, 0, 0x7f, 9375),
+};
+
+static const unsigned int ldo_volt_table1[] = {
+	2800000, 3000000, 0, 3200000
+};
+
+static const unsigned int ldo_volt_table2[] = {
+	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
+};
+
+static int mt6332_get_status(struct regulator_dev *rdev)
+{
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+	u32 reg, en_mask, regval;
+	int ret;
+
+	if (info->qi > 0) {
+		reg = info->desc.enable_reg;
+		en_mask = info->qi;
+	} else {
+		reg = info->status_reg;
+		en_mask = info->status_mask;
+	}
+
+	ret = regmap_read(rdev->regmap, reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & en_mask) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6332_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6332_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6332_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+}
+
+static unsigned int mt6332_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6332_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	return (val & BIT(0)) ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops mt6332_buck_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+};
+
+static const struct regulator_ops mt6332_ldo_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+	.set_mode = mt6332_ldo_set_mode,
+	.get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+	.set_mode = mt6332_ldo_set_mode,
+	.get_mode = mt6332_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6332_volt_table_ao_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops mt6332_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6332_get_status,
+};
+
+/* The array is indexed by id(MT6332_ID_XXX) */
+static struct mt6332_regulator_info mt6332_regulators[] = {
+	MT6332_BUCK("buck-vdram", VDRAM, 700000, 1493750, 6250, buck_volt_range,
+		    MT6332_EN_STATUS0, MT6332_VDRAM_CON11, GENMASK(6, 0),
+		    MT6332_VDRAM_CON12, MT6332_VDRAM_CON7),
+	MT6332_BUCK("buck-vdvfs2", VDVFS2, 700000, 1312500, 6250, buck_volt_range,
+		    MT6332_VDVFS2_CON9, MT6332_VDVFS2_CON11, GENMASK(6, 0),
+		    MT6332_VDVFS2_CON12, MT6332_VDVFS2_CON7),
+	MT6332_BUCK("buck-vpa", VPA, 500000, 3400000, 50000, buck_pa_volt_range,
+		    MT6332_VPA_CON9, MT6332_VPA_CON11, GENMASK(5, 0),
+		    MT6332_VPA_CON12, MT6332_VPA_CON7),
+	MT6332_BUCK("buck-vrf18a", VRF1, 1050000, 2240625, 9375, buck_rf_volt_range,
+		    MT6332_VRF1_CON9, MT6332_VRF1_CON11, GENMASK(6, 0),
+		    MT6332_VRF1_CON12, MT6332_VRF1_CON7),
+	MT6332_BUCK("buck-vrf18b", VRF2, 1050000, 2240625, 9375, buck_rf_volt_range,
+		    MT6332_VRF2_CON9, MT6332_VRF2_CON11, GENMASK(6, 0),
+		    MT6332_VRF2_CON12, MT6332_VRF2_CON7),
+	MT6332_BUCK("buck-vsbst", VSBST, 3500000, 7468750, 31250, boost_volt_range,
+		    MT6332_VSBST_CON8, MT6332_VSBST_CON12, GENMASK(6, 0),
+		    MT6332_VSBST_CON13, MT6332_VSBST_CON8),
+	MT6332_LDO("ldo-vauxb32", VAUXB32, ldo_volt_table1, MT6332_LDO_CON1, 10,
+		   MT6332_LDO_CON9, GENMASK(6, 5), MT6332_LDO_CON1, GENMASK(1, 0)),
+	MT6332_REG_FIXED("ldo-vbif28", VBIF28, MT6332_LDO_CON2, 10, 0, 2800000, 1),
+	MT6332_REG_FIXED("ldo-vusb33", VUSB33, MT6332_LDO_CON3, 10, 0, 3300000, 2),
+	MT6332_LDO_LINEAR("ldo-vsram", VSRAM_DVFS2, 700000, 1493750, 6250, buck_volt_range,
+			  MT6332_EN_STATUS0, MT6332_LDO_CON8, GENMASK(15, 9),
+			  MT6332_VDVFS2_CON23, MT6332_VDVFS2_CON22,
+			  MT6332_LDO_CON5, GENMASK(1, 0)),
+	MT6332_LDO_AO("ldo-vdig18", VDIG18, ldo_volt_table2, MT6332_LDO_CON12, GENMASK(11, 9)),
+};
+
+static int mt6332_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+		if (mt6332_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6332->regmap,
+				mt6332_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6332_regulators[i].vselctrl_mask) {
+				mt6332_regulators[i].desc.vsel_reg =
+				mt6332_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6332_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6332 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6332_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6332->regmap, MT6332_HWCID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	reg_value &= GENMASK(7, 0);
+
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	/*
+	 * ChipID 0x10 is "MT6332 E1", has a different voltage table and
+	 * it's currently not supported in this driver. Upon detection of
+	 * this ID, refuse to register the regulators, as we will wrongly
+	 * interpret the VSEL for this revision, potentially overvolting
+	 * some device.
+	 */
+	if (reg_value == 0x10) {
+		dev_err(&pdev->dev, "Chip version not supported. Bailing out.\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < MT6332_ID_VREG_MAX; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6332_regulators[i];
+		config.regmap = mt6332->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6332_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6332_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6332_platform_ids[] = {
+	{"mt6332-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6332_platform_ids);
+
+static struct platform_driver mt6332_regulator_driver = {
+	.driver = {
+		.name = "mt6332-regulator",
+	},
+	.probe = mt6332_regulator_probe,
+	.id_table = mt6332_platform_ids,
+};
+
+module_platform_driver(mt6332_regulator_driver);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6332 PMIC");
+MODULE_LICENSE("GPL");

drivers/regulator/of_regulator.c

@@ -676,7 +676,7 @@ bool of_check_coupling_data(struct regulator_dev *rdev)
 }
 
 /**
- * of_parse_coupled regulator - Get regulator_dev pointer from rdev's property
+ * of_parse_coupled_regulator() - Get regulator_dev pointer from rdev's property
  * @rdev: Pointer to regulator_dev, whose DTS is used as a source to parse
  *	  "regulator-coupled-with" property
  * @index: Index in phandles array

drivers/regulator/qcom-rpmh-regulator.c

@@ -306,9 +306,10 @@ static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
 }
 
 /**
- * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load
- *		current requested
+ * rpmh_regulator_vrm_get_optimum_mode() - get the mode based on the  load
  * @rdev:		Regulator device pointer for the rpmh-regulator
+ * @input_uV:		Input voltage
+ * @output_uV:		Output voltage
  * @load_uA:		Aggregated load current in microamps
  *
  * This function is used in the regulator_ops for VRM type RPMh regulator
@@ -316,17 +317,15 @@ static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
  *
  * Return: 0 on success, errno on failure
  */
-static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
+static unsigned int rpmh_regulator_vrm_get_optimum_mode(
+	struct regulator_dev *rdev, int input_uV, int output_uV, int load_uA)
 {
 	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
-	unsigned int mode;
 
 	if (load_uA >= vreg->hw_data->hpm_min_load_uA)
-		mode = REGULATOR_MODE_NORMAL;
+		return REGULATOR_MODE_NORMAL;
 	else
-		mode = REGULATOR_MODE_IDLE;
-
-	return rpmh_regulator_vrm_set_mode(rdev, mode);
+		return REGULATOR_MODE_IDLE;
 }
 
 static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
@@ -375,7 +374,7 @@ static const struct regulator_ops rpmh_regulator_vrm_drms_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.set_mode		= rpmh_regulator_vrm_set_mode,
 	.get_mode		= rpmh_regulator_vrm_get_mode,
-	.set_load		= rpmh_regulator_vrm_set_load,
+	.get_optimum_mode	= rpmh_regulator_vrm_get_optimum_mode,
 };
 
 static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
@@ -1199,6 +1198,52 @@ static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pm660_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic4_hfsmps3,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic4_hfsmps3,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic4_hfsmps3,   "vdd-s6"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic4_nldo,      "vdd-l1-l6-l7"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic4_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic4_nldo,      "vdd-l2-l3"),
+	/* ldo4 is inaccessible on PM660 */
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic4_nldo,      "vdd-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic4_nldo,      "vdd-l1-l6-l7"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic4_nldo,      "vdd-l1-l6-l7"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic4_pldo_lv,   "vdd-l8-l9-l10-l11-l12-l13-l14"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic4_pldo,      "vdd-l15-l16-l17-l18-l19"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic4_pldo,      "vdd-l15-l16-l17-l18-l19"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic4_pldo,      "vdd-l15-l16-l17-l18-l19"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic4_pldo,      "vdd-l15-l16-l17-l18-l19"),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic4_pldo,      "vdd-l15-l16-l17-l18-l19"),
+	{}
+};
+
+static const struct rpmh_vreg_init_data pm660l_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic4_ftsmps426, "vdd-s5"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic4_nldo,      "vdd-l1-l9-l10"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic4_pldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic4_pldo,      "vdd-l3-l5-l7-l8"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic4_pldo,      "vdd-l4-l6"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic4_pldo,      "vdd-l3-l5-l7-l8"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic4_pldo,      "vdd-l4-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic4_pldo,      "vdd-l3-l5-l7-l8"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic4_pldo,      "vdd-l3-l5-l7-l8"),
+	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
+	{}
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1321,6 +1366,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmr735a-rpmh-regulators",
 		.data = pmr735a_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm660-rpmh-regulators",
+		.data = pm660_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm660l-rpmh-regulators",
+		.data = pm660l_vreg_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);

drivers/regulator/qcom_rpm-regulator.c

@@ -802,6 +802,12 @@ static const struct rpm_regulator_data rpm_pm8018_regulators[] = {
 };
 
 static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
+	{ "s0",   QCOM_RPM_PM8058_SMPS0,  &pm8058_smps, "vdd_s0" },
+	{ "s1",   QCOM_RPM_PM8058_SMPS1,  &pm8058_smps, "vdd_s1" },
+	{ "s2",   QCOM_RPM_PM8058_SMPS2,  &pm8058_smps, "vdd_s2" },
+	{ "s3",   QCOM_RPM_PM8058_SMPS3,  &pm8058_smps, "vdd_s3" },
+	{ "s4",   QCOM_RPM_PM8058_SMPS4,  &pm8058_smps, "vdd_s4" },
+
 	{ "l0",   QCOM_RPM_PM8058_LDO0,   &pm8058_nldo, "vdd_l0_l1_lvs"	},
 	{ "l1",   QCOM_RPM_PM8058_LDO1,   &pm8058_nldo, "vdd_l0_l1_lvs" },
 	{ "l2",   QCOM_RPM_PM8058_LDO2,   &pm8058_pldo, "vdd_l2_l11_l12" },
@@ -829,12 +835,6 @@ static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
 	{ "l24",  QCOM_RPM_PM8058_LDO24,  &pm8058_nldo, "vdd_l23_l24_l25" },
 	{ "l25",  QCOM_RPM_PM8058_LDO25,  &pm8058_nldo, "vdd_l23_l24_l25" },
 
-	{ "s0",   QCOM_RPM_PM8058_SMPS0,  &pm8058_smps, "vdd_s0" },
-	{ "s1",   QCOM_RPM_PM8058_SMPS1,  &pm8058_smps, "vdd_s1" },
-	{ "s2",   QCOM_RPM_PM8058_SMPS2,  &pm8058_smps, "vdd_s2" },
-	{ "s3",   QCOM_RPM_PM8058_SMPS3,  &pm8058_smps, "vdd_s3" },
-	{ "s4",   QCOM_RPM_PM8058_SMPS4,  &pm8058_smps, "vdd_s4" },
-
 	{ "lvs0", QCOM_RPM_PM8058_LVS0, &pm8058_switch, "vdd_l0_l1_lvs" },
 	{ "lvs1", QCOM_RPM_PM8058_LVS1, &pm8058_switch, "vdd_l0_l1_lvs" },
 
@@ -843,6 +843,12 @@ static const struct rpm_regulator_data rpm_pm8058_regulators[] = {
 };
 
 static const struct rpm_regulator_data rpm_pm8901_regulators[] = {
+	{ "s0",   QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" },
+	{ "s1",   QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" },
+	{ "s2",   QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" },
+	{ "s3",   QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" },
+	{ "s4",   QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" },
+
 	{ "l0",   QCOM_RPM_PM8901_LDO0, &pm8901_nldo, "vdd_l0" },
 	{ "l1",   QCOM_RPM_PM8901_LDO1, &pm8901_pldo, "vdd_l1" },
 	{ "l2",   QCOM_RPM_PM8901_LDO2, &pm8901_pldo, "vdd_l2" },
@@ -851,12 +857,6 @@ static const struct rpm_regulator_data rpm_pm8901_regulators[] = {
 	{ "l5",   QCOM_RPM_PM8901_LDO5, &pm8901_pldo, "vdd_l5" },
 	{ "l6",   QCOM_RPM_PM8901_LDO6, &pm8901_pldo, "vdd_l6" },
 
-	{ "s0",   QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" },
-	{ "s1",   QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" },
-	{ "s2",   QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" },
-	{ "s3",   QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" },
-	{ "s4",   QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" },
-
 	{ "lvs0", QCOM_RPM_PM8901_LVS0, &pm8901_switch, "lvs0_in" },
 	{ "lvs1", QCOM_RPM_PM8901_LVS1, &pm8901_switch, "lvs1_in" },
 	{ "lvs2", QCOM_RPM_PM8901_LVS2, &pm8901_switch, "lvs2_in" },

drivers/regulator/qcom_smd-regulator.c

@@ -668,6 +668,15 @@ static const struct regulator_desc pm660l_bob = {
 	.ops = &rpm_bob_ops,
 };
 
+static const struct regulator_desc pm6125_ftsmps = {
+	.linear_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(300000, 0, 268, 4000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 269,
+	.ops = &rpm_smps_ldo_ops,
+};
+
 static const struct regulator_desc pms405_hfsmps3 = {
 	.linear_ranges = (struct linear_range[]) {
 		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
@@ -772,6 +781,158 @@ static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm2250_lvftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm2250_ftsmps, "vdd_s4" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
+	{}
+};
+
+static const struct rpm_regulator_data rpm_pm6125_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm6125_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm6125_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm6125_ftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm6125_ftsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8998_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm8998_hfsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pm8998_hfsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pm6125_ftsmps, "vdd_s8" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_nldo660, "vdd_l2_l3_l4" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l6_l8" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l6_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l9_l11" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l9_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l12_l16" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l10_l13_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l12_l16" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_nldo660, "vdd_l1_l7_l17_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm660_pldo660, "vdd_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm660_pldo660, "vdd_l23_l24" },
+	{ }
+};
+
+static const struct rpm_regulator_data rpm_pm660_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm660_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm660_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm660_ftsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm660_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm660_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm660_hfsmps, "vdd_s6" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l6_l7" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_ht_nldo, "vdd_l2_l3" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3" },
+	/* l4 is unaccessible on PM660 */
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_ht_nldo, "vdd_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_ht_nldo, "vdd_l1_l6_l7" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_ht_nldo, "vdd_l1_l6_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
+	{ }
+};
+
+static const struct rpm_regulator_data rpm_pm660l_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm660_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm660_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_RWCX, 0, &pm660_ftsmps, "vdd_s3_s4" },
+	{ "s5", QCOM_SMD_RPM_RWMX, 0, &pm660_ftsmps, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOB, 1, &pm660_nldo660, "vdd_l1_l9_l10" },
+	{ "l2", QCOM_SMD_RPM_LDOB, 2, &pm660_pldo660, "vdd_l2" },
+	{ "l3", QCOM_SMD_RPM_LDOB, 3, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l4", QCOM_SMD_RPM_LDOB, 4, &pm660_pldo660, "vdd_l4_l6" },
+	{ "l5", QCOM_SMD_RPM_LDOB, 5, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l6", QCOM_SMD_RPM_LDOB, 6, &pm660_pldo660, "vdd_l4_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOB, 7, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l8", QCOM_SMD_RPM_LDOB, 8, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
+	{ "l9", QCOM_SMD_RPM_RWLC, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
+	{ "l10", QCOM_SMD_RPM_RWLM, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
+	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pm660l_bob, "vdd_bob", },
+	{ }
+};
+
+static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8226_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8226_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8226_hfsmps, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8226_pldo, "vdd_l10_l11_l13" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8226_pldo, "vdd_l12_l14" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8226_pldo, "vdd_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8226_nldo, "vdd_l3_l24_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
+	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8226_switch, "vdd_lvs1" },
+	{}
+};
+
 static const struct rpm_regulator_data rpm_pm8841_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm8841_ftsmps, "vdd_s2" },
@@ -833,44 +994,6 @@ static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm8226_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8226_hfsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8226_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8226_hfsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8226_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm8226_hfsmps, "vdd_s5" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8226_nldo, "vdd_l1_l2_l4_l5" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8226_pldo, "vdd_l12_l14" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8226_pldo, "vdd_l10_l11_l13" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8226_pldo, "vdd_l12_l14" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8226_pldo, "vdd_l15_l16_l17_l18" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pm8226_pldo, "vdd_l25" },
-	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pm8226_nldo, "vdd_l3_l24_l26" },
-	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pm8226_pldo, "vdd_l6_l7_l8_l9_l27" },
-	{ "l28", QCOM_SMD_RPM_LDOA, 28, &pm8226_pldo, "vdd_l19_l20_l21_l22_l23_l28" },
-	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8226_switch, "vdd_lvs1" },
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" },
@@ -912,57 +1035,6 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" },
-	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" },
-	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" },
-	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" },
-	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" },
-	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" },
-	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" },
-	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" },
-
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" },
-	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
-	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" },
-	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
-	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
-
-	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch },
-	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch },
-	{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch },
-	{ "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch },
-	{ "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch },
-
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pm8950_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8950_hfsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8950_hfsmps, "vdd_s2" },
@@ -1082,14 +1154,6 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pmi8994_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" },
-	{ "boost-bypass", QCOM_SMD_RPM_BBYB, 1, &pmi8994_bby, "vdd_bst_byp" },
-	{}
-};
-
 static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
 	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" },
 	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" },
@@ -1137,57 +1201,68 @@ static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
-	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pmi8998_bob, "vdd_bob" },
+static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" },
+	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" },
+	{ "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" },
+	{ "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" },
+	{ "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" },
+	{ "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" },
+	{ "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" },
+	{ "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" },
+
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" },
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" },
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" },
+	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" },
+	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" },
+	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" },
+	{ "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" },
+	{ "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" },
+	{ "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" },
+	{ "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" },
+
+	{ "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch },
+	{ "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch },
+	{ "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch },
+	{ "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch },
+	{ "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch },
+
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm660_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm660_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm660_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm660_ftsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm660_hfsmps, "vdd_s4" },
-	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pm660_hfsmps, "vdd_s5" },
-	{ "s6", QCOM_SMD_RPM_SMPA, 6, &pm660_hfsmps, "vdd_s6" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l6_l7" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_ht_nldo, "vdd_l2_l3" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l2_l3" },
-	/* l4 is unaccessible on PM660 */
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_ht_nldo, "vdd_l5" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_ht_nldo, "vdd_l1_l6_l7" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_ht_nldo, "vdd_l1_l6_l7" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l8_l9_l10_l11_l12_l13_l14" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l15_l16_l17_l18_l19" },
-	{ }
+static const struct rpm_regulator_data rpm_pmi8994_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" },
+	{ "boost-bypass", QCOM_SMD_RPM_BBYB, 1, &pmi8994_bby, "vdd_bst_byp" },
+	{}
 };
 
-static const struct rpm_regulator_data rpm_pm660l_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPB, 1, &pm660_ftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPB, 2, &pm660_ftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_RWCX, 0, &pm660_ftsmps, "vdd_s3_s4" },
-	{ "s5", QCOM_SMD_RPM_RWMX, 0, &pm660_ftsmps, "vdd_s5" },
-	{ "l1", QCOM_SMD_RPM_LDOB, 1, &pm660_nldo660, "vdd_l1_l9_l10" },
-	{ "l2", QCOM_SMD_RPM_LDOB, 2, &pm660_pldo660, "vdd_l2" },
-	{ "l3", QCOM_SMD_RPM_LDOB, 3, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l4", QCOM_SMD_RPM_LDOB, 4, &pm660_pldo660, "vdd_l4_l6" },
-	{ "l5", QCOM_SMD_RPM_LDOB, 5, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l6", QCOM_SMD_RPM_LDOB, 6, &pm660_pldo660, "vdd_l4_l6" },
-	{ "l7", QCOM_SMD_RPM_LDOB, 7, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l8", QCOM_SMD_RPM_LDOB, 8, &pm660_pldo660, "vdd_l3_l5_l7_l8" },
-	{ "l9", QCOM_SMD_RPM_RWLC, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
-	{ "l10", QCOM_SMD_RPM_RWLM, 0, &pm660_ht_nldo, "vdd_l1_l9_l10" },
-	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pm660l_bob, "vdd_bob", },
-	{ }
+static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
+	{ "bob", QCOM_SMD_RPM_BOBB, 1, &pmi8998_bob, "vdd_bob" },
+	{}
 };
 
 static const struct rpm_regulator_data rpm_pms405_regulators[] = {
@@ -1212,54 +1287,25 @@ static const struct rpm_regulator_data rpm_pms405_regulators[] = {
 	{}
 };
 
-static const struct rpm_regulator_data rpm_pm2250_regulators[] = {
-	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm2250_lvftsmps, "vdd_s1" },
-	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm2250_lvftsmps, "vdd_s2" },
-	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm2250_lvftsmps, "vdd_s3" },
-	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm2250_ftsmps, "vdd_s4" },
-	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm660_nldo660, "vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12" },
-	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm660_ht_lvpldo, "vdd_l13_l14_l15_l16" },
-	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l19", QCOM_SMD_RPM_LDOA, 19, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l20", QCOM_SMD_RPM_LDOA, 20, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l21", QCOM_SMD_RPM_LDOA, 21, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{ "l22", QCOM_SMD_RPM_LDOA, 22, &pm660_pldo660, "vdd_l4_l17_l18_l19_l20_l21_l22" },
-	{}
-};
-
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-mp5496-regulators", .data = &rpm_mp5496_regulators },
+	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
+	{ .compatible = "qcom,rpm-pm6125-regulators", .data = &rpm_pm6125_regulators },
+	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
+	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
+	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8909-regulators", .data = &rpm_pm8909_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
-	{ .compatible = "qcom,rpm-pm8226-regulators", .data = &rpm_pm8226_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
 	{ .compatible = "qcom,rpm-pm8950-regulators", .data = &rpm_pm8950_regulators },
 	{ .compatible = "qcom,rpm-pm8953-regulators", .data = &rpm_pm8953_regulators },
 	{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
 	{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
-	{ .compatible = "qcom,rpm-pm660-regulators", .data = &rpm_pm660_regulators },
-	{ .compatible = "qcom,rpm-pm660l-regulators", .data = &rpm_pm660l_regulators },
 	{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
 	{ .compatible = "qcom,rpm-pmi8994-regulators", .data = &rpm_pmi8994_regulators },
 	{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
 	{ .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators },
-	{ .compatible = "qcom,rpm-pm2250-regulators", .data = &rpm_pm2250_regulators },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);

drivers/regulator/qcom_spmi-regulator.c

@@ -99,6 +99,9 @@ enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO_510,
+	SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS,
 };
 
 enum spmi_regulator_type {
@@ -166,6 +169,17 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
+	SPMI_REGULATOR_SUBTYPE_HFSMPS_510	= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_FTSMPS_510	= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_LV_P150_510	= 0x71,
+	SPMI_REGULATOR_SUBTYPE_LV_P300_510	= 0x72,
+	SPMI_REGULATOR_SUBTYPE_LV_P600_510	= 0x73,
+	SPMI_REGULATOR_SUBTYPE_N300_510		= 0x6a,
+	SPMI_REGULATOR_SUBTYPE_N600_510		= 0x6b,
+	SPMI_REGULATOR_SUBTYPE_N1200_510	= 0x6c,
+	SPMI_REGULATOR_SUBTYPE_MV_P50_510	= 0x7a,
+	SPMI_REGULATOR_SUBTYPE_MV_P150_510	= 0x7b,
+	SPMI_REGULATOR_SUBTYPE_MV_P600_510	= 0x7d,
 };
 
 enum spmi_common_regulator_registers {
@@ -193,6 +207,14 @@ enum spmi_ftsmps426_regulator_registers {
 	SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB	= 0x69,
 };
 
+/*
+ * Third common register layout
+ */
+enum spmi_hfsmps_regulator_registers {
+	SPMI_HFSMPS_REG_STEP_CTRL		= 0x3c,
+	SPMI_HFSMPS_REG_PULL_DOWN		= 0xa0,
+};
+
 enum spmi_vs_registers {
 	SPMI_VS_REG_OCP				= 0x4a,
 	SPMI_VS_REG_SOFT_START			= 0x4c,
@@ -260,6 +282,15 @@ enum spmi_common_control_register_index {
 
 #define SPMI_FTSMPS426_MODE_MASK		0x07
 
+/* Third common regulator mode register values */
+#define SPMI_HFSMPS_MODE_BYPASS_MASK		2
+#define SPMI_HFSMPS_MODE_RETENTION_MASK		3
+#define SPMI_HFSMPS_MODE_LPM_MASK		4
+#define SPMI_HFSMPS_MODE_AUTO_MASK		6
+#define SPMI_HFSMPS_MODE_HPM_MASK		7
+
+#define SPMI_HFSMPS_MODE_MASK			0x07
+
 /* Common regulator pull down control register layout */
 #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
 
@@ -305,6 +336,9 @@ enum spmi_common_control_register_index {
 #define SPMI_FTSMPS_STEP_MARGIN_NUM	4
 #define SPMI_FTSMPS_STEP_MARGIN_DEN	5
 
+/* slew_rate has units of uV/us. */
+#define SPMI_HFSMPS_SLEW_RATE_38p4 38400
+
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK	0x03
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT	0
 
@@ -554,6 +588,14 @@ static struct spmi_voltage_range ht_p600_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
 };
 
+static struct spmi_voltage_range nldo_510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 1304000, 1304000, 8000),
+};
+
+static struct spmi_voltage_range ftsmps510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 300000, 300000, 1372000, 1372000, 4000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -576,6 +618,8 @@ static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
 static DEFINE_SPMI_SET_POINTS(ht_p150);
 static DEFINE_SPMI_SET_POINTS(ht_p600);
+static DEFINE_SPMI_SET_POINTS(nldo_510);
+static DEFINE_SPMI_SET_POINTS(ftsmps510);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1062,6 +1106,23 @@ static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev
 	}
 }
 
+static unsigned int spmi_regulator_hfsmps_get_mode(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	switch (reg) {
+	case SPMI_HFSMPS_MODE_HPM_MASK:
+		return REGULATOR_MODE_NORMAL;
+	case SPMI_HFSMPS_MODE_AUTO_MASK:
+		return REGULATOR_MODE_FAST;
+	default:
+		return REGULATOR_MODE_IDLE;
+	}
+}
+
 static int
 spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
@@ -1108,6 +1169,33 @@ spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode)
 	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
 }
 
+static int
+spmi_regulator_hfsmps_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_HFSMPS_MODE_MASK;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = SPMI_HFSMPS_MODE_HPM_MASK;
+		break;
+	case REGULATOR_MODE_FAST:
+		val = SPMI_HFSMPS_MODE_AUTO_MASK;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = vreg->logical_type ==
+				SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3 ?
+			SPMI_HFSMPS_MODE_RETENTION_MASK :
+			SPMI_HFSMPS_MODE_LPM_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
 static int
 spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
 {
@@ -1131,6 +1219,15 @@ static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
 				     mask, mask);
 }
 
+static int spmi_regulator_hfsmps_set_pull_down(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_HFSMPS_REG_PULL_DOWN,
+				     mask, mask);
+}
+
 static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
 {
 	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
@@ -1465,6 +1562,21 @@ static const struct regulator_ops spmi_hfs430_ops = {
 	.get_mode		= spmi_regulator_ftsmps426_get_mode,
 };
 
+static const struct regulator_ops spmi_hfsmps_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= spmi_regulator_ftsmps426_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_ftsmps426_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_hfsmps_set_mode,
+	.get_mode		= spmi_regulator_hfsmps_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_hfsmps_set_pull_down,
+};
+
 /* Maximum possible digital major revision value */
 #define INF 0xFF
 
@@ -1473,7 +1585,8 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(LDO,   HT_P600,  0, INF, HFS430, hfs430, ht_p600, 10000),
 	SPMI_VREG(LDO,   HT_P150,  0, INF, HFS430, hfs430, ht_p150, 10000),
 	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
-	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFS430,   0,   3, HFS430, hfs430, hfs430,  10000),
+	SPMI_VREG(BUCK,  HFSMPS_510, 4, INF, HFSMPS, hfsmps, hfs430, 100000),
 	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
 	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
 	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
@@ -1549,6 +1662,16 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(ULT_LDO, P300,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+	SPMI_VREG(LDO, LV_P150_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P300_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P600_510, 0, INF, LDO_510, hfsmps, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, MV_P50_510,  0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P150_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P600_510, 0, INF, LDO_510, hfsmps, pldo660, 10000),
+	SPMI_VREG(LDO, N300_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N600_510,    0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(LDO, N1200_510,   0, INF, LDO_510, hfsmps, nldo_510, 10000),
+	SPMI_VREG(FTS, FTSMPS_510,  0, INF, FTSMPS3, hfsmps, ftsmps510, 100000),
 };
 
 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
@@ -1696,6 +1819,26 @@ static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg,
 	return ret;
 }
 
+static int spmi_regulator_init_slew_rate_hfsmps(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int delay;
+
+	ret = spmi_vreg_read(vreg, SPMI_HFSMPS_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT;
+
+	vreg->slew_rate = SPMI_HFSMPS_SLEW_RATE_38p4 >> delay;
+
+	return ret;
+}
+
 static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
 				const struct spmi_regulator_init_data *data)
 {
@@ -1846,6 +1989,12 @@ static int spmi_regulator_of_parse(struct device_node *node,
 		if (ret)
 			return ret;
 		break;
+	case SPMI_REGULATOR_LOGICAL_TYPE_HFSMPS:
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3:
+		ret = spmi_regulator_init_slew_rate_hfsmps(vreg);
+		if (ret)
+			return ret;
+		break;
 	default:
 		break;
 	}
@@ -1872,40 +2021,100 @@ static int spmi_regulator_of_parse(struct device_node *node,
 	return 0;
 }
 
-static const struct spmi_regulator_data pm8941_regulators[] = {
+static const struct spmi_regulator_data pm6125_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1" },
+	{ "s2", 0x1700, "vdd_s2" },
+	{ "s3", 0x1a00, "vdd_s3" },
+	{ "s4", 0x1d00, "vdd_s4" },
+	{ "s5", 0x2000, "vdd_s5" },
+	{ "s6", 0x2300, "vdd_s6" },
+	{ "s7", 0x2600, "vdd_s7" },
+	{ "s8", 0x2900, "vdd_s8" },
+	{ "l1", 0x4000, "vdd_l1_l7_l17_l18" },
+	{ "l2", 0x4100, "vdd_l2_l3_l4" },
+	{ "l3", 0x4200, "vdd_l2_l3_l4" },
+	{ "l4", 0x4300, "vdd_l2_l3_l4" },
+	{ "l5", 0x4400, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l6", 0x4500, "vdd_l6_l8" },
+	{ "l7", 0x4600, "vdd_l1_l7_l17_l18" },
+	{ "l8", 0x4700, "vdd_l6_l8" },
+	{ "l9", 0x4800, "vdd_l9_l11" },
+	{ "l10", 0x4900, "vdd_l10_l13_l14" },
+	{ "l11", 0x4a00, "vdd_l9_l11" },
+	{ "l12", 0x4b00, "vdd_l12_l16" },
+	{ "l13", 0x4c00, "vdd_l10_l13_l14" },
+	{ "l14", 0x4d00, "vdd_l10_l13_l14" },
+	{ "l15", 0x4e00, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l16", 0x4f00, "vdd_l12_l16" },
+	{ "l17", 0x5000, "vdd_l1_l7_l17_l18" },
+	{ "l18", 0x5100, "vdd_l1_l7_l17_l18" },
+	{ "l19", 0x5200, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l20", 0x5300, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l21", 0x5400, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l22", 0x5500, "vdd_l5_l15_l19_l20_l21_l22" },
+	{ "l23", 0x5600, "vdd_l23_l24" },
+	{ "l24", 0x5700, "vdd_l23_l24" },
+};
+
+static const struct spmi_regulator_data pm660_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
 	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0xa000, },
-	{ "l1", 0x4000, "vdd_l1_l3", },
-	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
-	{ "l3", 0x4200, "vdd_l1_l3", },
-	{ "l4", 0x4300, "vdd_l4_l11", },
-	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
-	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
-	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
-	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
-	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
-	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
-	{ "l11", 0x4a00, "vdd_l4_l11", },
-	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
-	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
-	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
-	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
-	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
-	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
-	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
-	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
-	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
-	{ "l21", 0x5400, "vdd_l21", },
-	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
-	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
-	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
-	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
-	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
-	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
-	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
+	{ "s4", 0x1d00, "vdd_s3", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "s6", 0x2300, "vdd_s6", },
+	{ "l1", 0x4000, "vdd_l1_l6_l7", },
+	{ "l2", 0x4100, "vdd_l2_l3", },
+	{ "l3", 0x4200, "vdd_l2_l3", },
+	/* l4 is unaccessible on PM660 */
+	{ "l5", 0x4400, "vdd_l5", },
+	{ "l6", 0x4500, "vdd_l1_l6_l7", },
+	{ "l7", 0x4600, "vdd_l1_l6_l7", },
+	{ "l8", 0x4700, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l9", 0x4800, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l10", 0x4900, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l11", 0x4a00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l12", 0x4b00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l13", 0x4c00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l14", 0x4d00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
+	{ "l15", 0x4e00, "vdd_l15_l16_l17_l18_l19", },
+	{ "l16", 0x4f00, "vdd_l15_l16_l17_l18_l19", },
+	{ "l17", 0x5000, "vdd_l15_l16_l17_l18_l19", },
+	{ "l18", 0x5100, "vdd_l15_l16_l17_l18_l19", },
+	{ "l19", 0x5200, "vdd_l15_l16_l17_l18_l19", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm660l_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ "l1", 0x4000, "vdd_l1_l9_l10", },
+	{ "l2", 0x4100, "vdd_l2", },
+	{ "l3", 0x4200, "vdd_l3_l5_l7_l8", },
+	{ "l4", 0x4300, "vdd_l4_l6", },
+	{ "l5", 0x4400, "vdd_l3_l5_l7_l8", },
+	{ "l6", 0x4500, "vdd_l4_l6", },
+	{ "l7", 0x4600, "vdd_l3_l5_l7_l8", },
+	{ "l8", 0x4700, "vdd_l3_l5_l7_l8", },
+	{ "l9", 0x4800, "vdd_l1_l9_l10", },
+	{ "l10", 0x4900, "vdd_l1_l9_l10", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8004_regulators[] = {
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s5", 0x2000, "vdd_s5", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8005_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
 	{ }
 };
 
@@ -1985,6 +2194,43 @@ static const struct spmi_regulator_data pm8916_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pm8941_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0xa000, },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l11", },
+	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
+	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
+	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
+	{ "l11", 0x4a00, "vdd_l4_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
+	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
+	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
+	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
+	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
+	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
+	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
+	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
+	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
+	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
+	{ }
+};
+
 static const struct spmi_regulator_data pm8950_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2076,69 +2322,6 @@ static const struct spmi_regulator_data pmi8994_regulators[] = {
 	{ }
 };
 
-static const struct spmi_regulator_data pm660_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s3", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ "s6", 0x2300, "vdd_s6", },
-	{ "l1", 0x4000, "vdd_l1_l6_l7", },
-	{ "l2", 0x4100, "vdd_l2_l3", },
-	{ "l3", 0x4200, "vdd_l2_l3", },
-	/* l4 is unaccessible on PM660 */
-	{ "l5", 0x4400, "vdd_l5", },
-	{ "l6", 0x4500, "vdd_l1_l6_l7", },
-	{ "l7", 0x4600, "vdd_l1_l6_l7", },
-	{ "l8", 0x4700, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l9", 0x4800, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l10", 0x4900, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l11", 0x4a00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l12", 0x4b00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l13", 0x4c00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l14", 0x4d00, "vdd_l8_l9_l10_l11_l12_l13_l14", },
-	{ "l15", 0x4e00, "vdd_l15_l16_l17_l18_l19", },
-	{ "l16", 0x4f00, "vdd_l15_l16_l17_l18_l19", },
-	{ "l17", 0x5000, "vdd_l15_l16_l17_l18_l19", },
-	{ "l18", 0x5100, "vdd_l15_l16_l17_l18_l19", },
-	{ "l19", 0x5200, "vdd_l15_l16_l17_l18_l19", },
-	{ }
-};
-
-static const struct spmi_regulator_data pm660l_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s4", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ "l1", 0x4000, "vdd_l1_l9_l10", },
-	{ "l2", 0x4100, "vdd_l2", },
-	{ "l3", 0x4200, "vdd_l3_l5_l7_l8", },
-	{ "l4", 0x4300, "vdd_l4_l6", },
-	{ "l5", 0x4400, "vdd_l3_l5_l7_l8", },
-	{ "l6", 0x4500, "vdd_l4_l6", },
-	{ "l7", 0x4600, "vdd_l3_l5_l7_l8", },
-	{ "l8", 0x4700, "vdd_l3_l5_l7_l8", },
-	{ "l9", 0x4800, "vdd_l1_l9_l10", },
-	{ "l10", 0x4900, "vdd_l1_l9_l10", },
-	{ }
-};
-
-
-static const struct spmi_regulator_data pm8004_regulators[] = {
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s5", 0x2000, "vdd_s5", },
-	{ }
-};
-
-static const struct spmi_regulator_data pm8005_regulators[] = {
-	{ "s1", 0x1400, "vdd_s1", },
-	{ "s2", 0x1700, "vdd_s2", },
-	{ "s3", 0x1a00, "vdd_s3", },
-	{ "s4", 0x1d00, "vdd_s4", },
-	{ }
-};
-
 static const struct spmi_regulator_data pmp8074_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1"},
 	{ "s2", 0x1700, "vdd_s2"},
@@ -2167,6 +2350,9 @@ static const struct spmi_regulator_data pms405_regulators[] = {
 };
 
 static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm6125-regulators", .data = &pm6125_regulators },
+	{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
+	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators },
 	{ .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators },
 	{ .compatible = "qcom,pm8226-regulators", .data = &pm8226_regulators },
@@ -2176,8 +2362,6 @@ static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8950-regulators", .data = &pm8950_regulators },
 	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
 	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
-	{ .compatible = "qcom,pm660-regulators", .data = &pm660_regulators },
-	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators },
 	{ .compatible = "qcom,pms405-regulators", .data = &pms405_regulators },
 	{ }

drivers/regulator/ti-abb-regulator.c

@@ -151,7 +151,7 @@ static inline void ti_abb_clear_txdone(const struct ti_abb *abb)
 };
 
 /**
- * ti_abb_wait_tranx() - waits for ABB tranxdone event
+ * ti_abb_wait_txdone() - waits for ABB tranxdone event
  * @dev:	device
  * @abb:	pointer to the abb instance
  *

drivers/regulator/tps65219-regulator.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// tps65219-regulator.c
+//
+// Regulator driver for TPS65219 PMIC
+//
+// Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
+//
+// This implementation derived from tps65218 authored by
+// "J Keerthy <j-keerthy@ti.com>"
+//
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/tps65219.h>
+
+struct tps65219_regulator_irq_type {
+	const char *irq_name;
+	const char *regulator_name;
+	const char *event_name;
+	unsigned long event;
+};
+
+static struct tps65219_regulator_irq_type tps65219_regulator_irq_types[] = {
+	{ "LDO3_SCG", "LDO3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "LDO3_OC", "LDO3", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "LDO3_UV", "LDO3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "LDO4_SCG", "LDO4", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "LDO4_OC", "LDO4", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "LDO4_UV", "LDO4", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "LDO1_SCG", "LDO1", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "LDO1_OC", "LDO1", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "LDO1_UV", "LDO1", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "LDO2_SCG", "LDO2", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "LDO2_OC", "LDO2", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "LDO2_UV", "LDO2", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "BUCK3_SCG", "BUCK3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "BUCK3_OC", "BUCK3", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK3_NEG_OC", "BUCK3", "negative overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK3_UV", "BUCK3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "BUCK1_SCG", "BUCK1", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "BUCK1_OC", "BUCK1", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK1_NEG_OC", "BUCK1", "negative overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK1_UV", "BUCK1", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "BUCK2_SCG", "BUCK2", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
+	{ "BUCK2_OC", "BUCK2", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK2_NEG_OC", "BUCK2", "negative overcurrent", REGULATOR_EVENT_OVER_CURRENT },
+	{ "BUCK2_UV", "BUCK2", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
+	{ "BUCK1_RV", "BUCK1", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "BUCK2_RV", "BUCK2", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "BUCK3_RV", "BUCK3", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO1_RV", "LDO1", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO2_RV", "LDO2", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO3_RV", "LDO3", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO4_RV", "LDO4", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "BUCK1_RV_SD", "BUCK1", "residual voltage on shutdown",
+	 REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "BUCK2_RV_SD", "BUCK2", "residual voltage on shutdown",
+	 REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "BUCK3_RV_SD", "BUCK3", "residual voltage on shutdown",
+	 REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO1_RV_SD", "LDO1", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO2_RV_SD", "LDO2", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO3_RV_SD", "LDO3", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "LDO4_RV_SD", "LDO4", "residual voltage on shutdown", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
+	{ "SENSOR_3_WARM", "SENSOR3", "warm temperature", REGULATOR_EVENT_OVER_TEMP_WARN},
+	{ "SENSOR_2_WARM", "SENSOR2", "warm temperature", REGULATOR_EVENT_OVER_TEMP_WARN },
+	{ "SENSOR_1_WARM", "SENSOR1", "warm temperature", REGULATOR_EVENT_OVER_TEMP_WARN },
+	{ "SENSOR_0_WARM", "SENSOR0", "warm temperature", REGULATOR_EVENT_OVER_TEMP_WARN },
+	{ "SENSOR_3_HOT", "SENSOR3", "hot temperature", REGULATOR_EVENT_OVER_TEMP},
+	{ "SENSOR_2_HOT", "SENSOR2", "hot temperature", REGULATOR_EVENT_OVER_TEMP },
+	{ "SENSOR_1_HOT", "SENSOR1", "hot temperature", REGULATOR_EVENT_OVER_TEMP },
+	{ "SENSOR_0_HOT", "SENSOR0", "hot temperature", REGULATOR_EVENT_OVER_TEMP },
+	{ "TIMEOUT", "", "", REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE },
+};
+
+struct tps65219_regulator_irq_data {
+	struct device *dev;
+	struct tps65219_regulator_irq_type *type;
+	struct regulator_dev *rdev;
+};
+
+#define TPS65219_REGULATOR(_name, _of, _id, _type, _ops, _n, _vr, _vm, _er, \
+			   _em, _cr, _cm, _lr, _nlr, _delay, _fuv, \
+			   _ct, _ncl, _bpm) \
+	{								\
+		.name			= _name,			\
+		.of_match		= _of,				\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.supply_name		= _of,				\
+		.id			= _id,				\
+		.ops			= &(_ops),			\
+		.n_voltages		= _n,				\
+		.type			= _type,			\
+		.owner			= THIS_MODULE,			\
+		.vsel_reg		= _vr,				\
+		.vsel_mask		= _vm,				\
+		.csel_reg		= _cr,				\
+		.csel_mask		= _cm,				\
+		.curr_table		= _ct,				\
+		.n_current_limits	= _ncl,				\
+		.enable_reg		= _er,				\
+		.enable_mask		= _em,				\
+		.volt_table		= NULL,				\
+		.linear_ranges		= _lr,				\
+		.n_linear_ranges	= _nlr,				\
+		.ramp_delay		= _delay,			\
+		.fixed_uV		= _fuv,				\
+		.bypass_reg		= _vr,				\
+		.bypass_mask		= _bpm,				\
+	}								\
+
+static const struct linear_range bucks_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x1f, 25000),
+	REGULATOR_LINEAR_RANGE(1400000, 0x20, 0x33, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x34, 0x3f, 0),
+};
+
+static const struct linear_range ldos_1_2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x37, 50000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x38, 0x3f, 0),
+};
+
+static const struct linear_range ldos_3_4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0x0, 0xC, 0),
+	REGULATOR_LINEAR_RANGE(1250000, 0xD, 0x35, 50000),
+	REGULATOR_LINEAR_RANGE(3300000, 0x36, 0x3F, 0),
+};
+
+static int tps65219_set_mode(struct regulator_dev *dev, unsigned int mode)
+{
+	struct tps65219 *tps = rdev_get_drvdata(dev);
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		return regmap_set_bits(tps->regmap, TPS65219_REG_STBY_1_CONFIG,
+				       dev->desc->enable_mask);
+
+	case REGULATOR_MODE_STANDBY:
+		return regmap_clear_bits(tps->regmap,
+					 TPS65219_REG_STBY_1_CONFIG,
+					 dev->desc->enable_mask);
+	default:
+		return -EINVAL;
+	}
+}
+
+static unsigned int tps65219_get_mode(struct regulator_dev *dev)
+{
+	struct tps65219 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+	int ret, value = 0;
+
+	ret = regmap_read(tps->regmap, TPS65219_REG_STBY_1_CONFIG, &value);
+	if (ret) {
+		dev_dbg(tps->dev, "%s failed for regulator %s: %d ",
+			__func__, dev->desc->name, ret);
+		return ret;
+	}
+	value = (value & BIT(rid)) >> rid;
+	if (value)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+/*
+ * generic regulator_set_bypass_regmap does not fully match requirements
+ * TPS65219 Requires explicitly that regulator is disabled before switch
+ */
+static int tps65219_set_bypass(struct regulator_dev *dev, bool enable)
+{
+	struct tps65219 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (dev->desc->ops->is_enabled(dev)) {
+		dev_err(tps->dev,
+			"%s LDO%d enabled, must be shut down to set bypass ",
+			__func__, rid);
+		return -EBUSY;
+	}
+	return regulator_set_bypass_regmap(dev, enable);
+}
+
+/* Operations permitted on BUCK1/2/3 */
+static const struct regulator_ops tps65219_bucks_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= tps65219_set_mode,
+	.get_mode		= tps65219_get_mode,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+
+};
+
+/* Operations permitted on LDO1/2 */
+static const struct regulator_ops tps65219_ldos_1_2_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= tps65219_set_mode,
+	.get_mode		= tps65219_get_mode,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_bypass		= tps65219_set_bypass,
+	.get_bypass		= regulator_get_bypass_regmap,
+};
+
+/* Operations permitted on LDO3/4 */
+static const struct regulator_ops tps65219_ldos_3_4_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= tps65219_set_mode,
+	.get_mode		= tps65219_get_mode,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+};
+
+static const struct regulator_desc regulators[] = {
+	TPS65219_REGULATOR("BUCK1", "buck1", TPS65219_BUCK_1,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK1_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK1_EN_MASK, 0, 0, bucks_ranges,
+			   3, 4000, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("BUCK2", "buck2", TPS65219_BUCK_2,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK2_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK2_EN_MASK, 0, 0, bucks_ranges,
+			   3, 4000, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("BUCK3", "buck3", TPS65219_BUCK_3,
+			   REGULATOR_VOLTAGE, tps65219_bucks_ops, 64,
+			   TPS65219_REG_BUCK3_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_BUCK3_EN_MASK, 0, 0, bucks_ranges,
+			   3, 0, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("LDO1", "ldo1", TPS65219_LDO_1,
+			   REGULATOR_VOLTAGE, tps65219_ldos_1_2_ops, 64,
+			   TPS65219_REG_LDO1_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO1_EN_MASK, 0, 0, ldos_1_2_ranges,
+			   2, 0, 0, NULL, 0, TPS65219_LDOS_BYP_CONFIG_MASK),
+	TPS65219_REGULATOR("LDO2", "ldo2", TPS65219_LDO_2,
+			   REGULATOR_VOLTAGE, tps65219_ldos_1_2_ops, 64,
+			   TPS65219_REG_LDO2_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO2_EN_MASK, 0, 0, ldos_1_2_ranges,
+			   2, 0, 0, NULL, 0, TPS65219_LDOS_BYP_CONFIG_MASK),
+	TPS65219_REGULATOR("LDO3", "ldo3", TPS65219_LDO_3,
+			   REGULATOR_VOLTAGE, tps65219_ldos_3_4_ops, 64,
+			   TPS65219_REG_LDO3_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO3_EN_MASK, 0, 0, ldos_3_4_ranges,
+			   3, 0, 0, NULL, 0, 0),
+	TPS65219_REGULATOR("LDO4", "ldo4", TPS65219_LDO_4,
+			   REGULATOR_VOLTAGE, tps65219_ldos_3_4_ops, 64,
+			   TPS65219_REG_LDO4_VOUT,
+			   TPS65219_BUCKS_LDOS_VOUT_VSET_MASK,
+			   TPS65219_REG_ENABLE_CTRL,
+			   TPS65219_ENABLE_LDO4_EN_MASK, 0, 0, ldos_3_4_ranges,
+			   3, 0, 0, NULL, 0, 0),
+};
+
+static irqreturn_t tps65219_regulator_irq_handler(int irq, void *data)
+{
+	struct tps65219_regulator_irq_data *irq_data = data;
+
+	if (irq_data->type->event_name[0] == '\0') {
+		/* This is the timeout interrupt no specific regulator */
+		dev_err(irq_data->dev,
+			"System was put in shutdown due to timeout during an active or standby transition.\n");
+		return IRQ_HANDLED;
+	}
+
+	regulator_notifier_call_chain(irq_data->rdev,
+				      irq_data->type->event, NULL);
+
+	dev_err(irq_data->dev, "Error IRQ trap %s for %s\n",
+		irq_data->type->event_name, irq_data->type->regulator_name);
+	return IRQ_HANDLED;
+}
+
+static int tps65219_get_rdev_by_name(const char *regulator_name,
+				     struct regulator_dev *rdevtbl[7],
+				     struct regulator_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		if (strcmp(regulator_name, regulators[i].name) == 0) {
+			dev = rdevtbl[i];
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int tps65219_regulator_probe(struct platform_device *pdev)
+{
+	struct tps65219 *tps = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	int i;
+	int error;
+	int irq;
+	struct tps65219_regulator_irq_data *irq_data;
+	struct tps65219_regulator_irq_type *irq_type;
+	struct regulator_dev *rdevtbl[7];
+
+	config.dev = tps->dev;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		dev_dbg(tps->dev, "%s regul i= %d START", __func__, i);
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(tps->dev, "failed to register %s regulator\n",
+				pdev->name);
+			return PTR_ERR(rdev);
+		}
+		rdevtbl[i] = rdev;
+		dev_dbg(tps->dev, "%s regul i= %d COMPLETED", __func__, i);
+	}
+
+	irq_data = devm_kmalloc(tps->dev,
+				ARRAY_SIZE(tps65219_regulator_irq_types) *
+				sizeof(struct tps65219_regulator_irq_data),
+				GFP_KERNEL);
+	if (!irq_data)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(tps65219_regulator_irq_types); ++i) {
+		irq_type = &tps65219_regulator_irq_types[i];
+
+		irq = platform_get_irq_byname(pdev, irq_type->irq_name);
+		if (irq < 0)
+			return -EINVAL;
+
+		irq_data[i].dev = tps->dev;
+		irq_data[i].type = irq_type;
+
+		tps65219_get_rdev_by_name(irq_type->regulator_name, rdevtbl, rdev);
+		if (rdev < 0) {
+			dev_err(tps->dev, "Failed to get rdev for %s\n",
+				irq_type->regulator_name);
+			return -EINVAL;
+		}
+		irq_data[i].rdev = rdev;
+
+		error = devm_request_threaded_irq(tps->dev, irq, NULL,
+						  tps65219_regulator_irq_handler,
+						  IRQF_ONESHOT,
+						  irq_type->irq_name,
+						  &irq_data[i]);
+		if (error) {
+			dev_err(tps->dev, "failed to request %s IRQ %d: %d\n",
+				irq_type->irq_name, irq, error);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id tps65219_regulator_id_table[] = {
+	{ "tps65219-regulator", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65219_regulator_id_table);
+
+static struct platform_driver tps65219_regulator_driver = {
+	.driver = {
+		.name = "tps65219-pmic",
+	},
+	.probe = tps65219_regulator_probe,
+	.id_table = tps65219_regulator_id_table,
+};
+
+module_platform_driver(tps65219_regulator_driver);
+
+MODULE_AUTHOR("Jerome Neanne <j-neanne@baylibre.com>");
+MODULE_DESCRIPTION("TPS65219 voltage regulator driver");
+MODULE_ALIAS("platform:tps65219-pmic");
+MODULE_LICENSE("GPL");

include/linux/regulator/consumer.h

@@ -207,6 +207,8 @@ struct regulator *__must_check regulator_get_optional(struct device *dev,
 						      const char *id);
 struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
 							   const char *id);
+int devm_regulator_get_enable(struct device *dev, const char *id);
+int devm_regulator_get_enable_optional(struct device *dev, const char *id);
 void regulator_put(struct regulator *regulator);
 void devm_regulator_put(struct regulator *regulator);
 
@@ -244,12 +246,15 @@ int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
 				    struct regulator_bulk_data *consumers);
 int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
 					 struct regulator_bulk_data *consumers);
+void devm_regulator_bulk_put(struct regulator_bulk_data *consumers);
 int __must_check devm_regulator_bulk_get_const(
 	struct device *dev, int num_consumers,
 	const struct regulator_bulk_data *in_consumers,
 	struct regulator_bulk_data **out_consumers);
 int __must_check regulator_bulk_enable(int num_consumers,
 				       struct regulator_bulk_data *consumers);
+int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
+				   const char * const *id);
 int regulator_bulk_disable(int num_consumers,
 			   struct regulator_bulk_data *consumers);
 int regulator_bulk_force_disable(int num_consumers,
@@ -354,6 +359,17 @@ devm_regulator_get_exclusive(struct device *dev, const char *id)
 	return ERR_PTR(-ENODEV);
 }
 
+static inline int devm_regulator_get_enable(struct device *dev, const char *id)
+{
+	return -ENODEV;
+}
+
+static inline int devm_regulator_get_enable_optional(struct device *dev,
+						     const char *id)
+{
+	return -ENODEV;
+}
+
 static inline struct regulator *__must_check
 regulator_get_optional(struct device *dev, const char *id)
 {
@@ -375,6 +391,10 @@ static inline void devm_regulator_put(struct regulator *regulator)
 {
 }
 
+static inline void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
+{
+}
+
 static inline int regulator_register_supply_alias(struct device *dev,
 						  const char *id,
 						  struct device *alias_dev,
@@ -465,6 +485,13 @@ static inline int regulator_bulk_enable(int num_consumers,
 	return 0;
 }
 
+static inline int devm_regulator_bulk_get_enable(struct device *dev,
+						 int num_consumers,
+						 const char * const *id)
+{
+	return 0;
+}
+
 static inline int regulator_bulk_disable(int num_consumers,
 					 struct regulator_bulk_data *consumers)
 {

include/linux/regulator/gpio-regulator.h

@@ -42,6 +42,7 @@ struct gpio_regulator_state {
 /**
  * struct gpio_regulator_config - config structure
  * @supply_name:	Name of the regulator supply
+ * @input_supply:	Name of the input regulator supply
  * @enabled_at_boot:	Whether regulator has been enabled at
  *			boot or not. 1 = Yes, 0 = No
  *			This is used to keep the regulator at
@@ -62,6 +63,7 @@ struct gpio_regulator_state {
  */
 struct gpio_regulator_config {
 	const char *supply_name;
+	const char *input_supply;
 
 	unsigned enabled_at_boot:1;
 	unsigned startup_delay;

include/linux/regulator/mt6331-regulator.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6331_H
+#define __LINUX_REGULATOR_MT6331_H
+
+enum {
+	/* BUCK */
+	MT6331_ID_VDVFS11 = 0,
+	MT6331_ID_VDVFS12,
+	MT6331_ID_VDVFS13,
+	MT6331_ID_VDVFS14,
+	MT6331_ID_VCORE2,
+	MT6331_ID_VIO18,
+	/* LDO */
+	MT6331_ID_VTCXO1,
+	MT6331_ID_VTCXO2,
+	MT6331_ID_AVDD32_AUD,
+	MT6331_ID_VAUXA32,
+	MT6331_ID_VCAMA,
+	MT6331_ID_VIO28,
+	MT6331_ID_VCAM_AF,
+	MT6331_ID_VMC,
+	MT6331_ID_VMCH,
+	MT6331_ID_VEMC33,
+	MT6331_ID_VGP1,
+	MT6331_ID_VSIM1,
+	MT6331_ID_VSIM2,
+	MT6331_ID_VMIPI,
+	MT6331_ID_VIBR,
+	MT6331_ID_VGP4,
+	MT6331_ID_VCAMD,
+	MT6331_ID_VUSB10,
+	MT6331_ID_VCAM_IO,
+	MT6331_ID_VSRAM_DVFS1,
+	MT6331_ID_VGP2,
+	MT6331_ID_VGP3,
+	MT6331_ID_VRTC,
+	MT6331_ID_VDIG18,
+	MT6331_ID_VREG_MAX
+};
+
+#endif /* __LINUX_REGULATOR_MT6331_H */

include/linux/regulator/mt6332-regulator.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6332_H
+#define __LINUX_REGULATOR_MT6332_H
+
+enum {
+	/* BUCK */
+	MT6332_ID_VDRAM = 0,
+	MT6332_ID_VDVFS2,
+	MT6332_ID_VPA,
+	MT6332_ID_VRF1,
+	MT6332_ID_VRF2,
+	MT6332_ID_VSBST,
+	/* LDO */
+	MT6332_ID_VAUXB32,
+	MT6332_ID_VBIF28,
+	MT6332_ID_VDIG18,
+	MT6332_ID_VSRAM_DVFS2,
+	MT6332_ID_VUSB33,
+	MT6332_ID_VREG_MAX
+};
+
+#endif /* __LINUX_REGULATOR_MT6332_H */