arm64: dts: qcom: sm8350: switch USB QMP PHY to new style of bindings

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-15-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -2238,34 +2238,27 @@ usb_1_qmpphy_dp_in: endpoint {
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2418,7 +2411,7 @@ usb_2_dwc3: usb@a800000 {
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};