Merge branch 'net-phy-add-and-use-further-MMD-accessors'

Heiner Kallweit says:

====================
net: phy: add and use further MMD accessors

Add MMD accessors for modifying MMD registers and clearing / setting
bits in MMD registers. Use these accessors in PHY drivers and phylib.

v2:
- fix SoB in patch 2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/dp83867.c

@@ -127,17 +127,13 @@ static int dp83867_config_port_mirroring(struct phy_device *phydev)
 {
 	struct dp83867_private *dp83867 =
 		(struct dp83867_private *)phydev->priv;
-	u16 val;
-
-	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
 
 	if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
-		val |= DP83867_CFG4_PORT_MIRROR_EN;
+		phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				 DP83867_CFG4_PORT_MIRROR_EN);
 	else
-		val &= ~DP83867_CFG4_PORT_MIRROR_EN;
-
-	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   DP83867_CFG4_PORT_MIRROR_EN);
 	return 0;
 }
 
@@ -222,11 +218,9 @@ static int dp83867_config_init(struct phy_device *phydev)
 	}
 
 	/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
-	if (dp83867->rxctrl_strap_quirk) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
-		val &= ~BIT(7);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-	}
+	if (dp83867->rxctrl_strap_quirk)
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   BIT(7));
 
 	if (phy_interface_is_rgmii(phydev)) {
 		val = phy_read(phydev, MII_DP83867_PHYCTRL);
@@ -275,17 +269,11 @@ static int dp83867_config_init(struct phy_device *phydev)
 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
 			      delay);
 
-		if (dp83867->io_impedance >= 0) {
-			val = phy_read_mmd(phydev, DP83867_DEVADDR,
-					   DP83867_IO_MUX_CFG);
-
-			val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-			val |= dp83867->io_impedance &
-			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-
-			phy_write_mmd(phydev, DP83867_DEVADDR,
-				      DP83867_IO_MUX_CFG, val);
-		}
+		if (dp83867->io_impedance >= 0)
+			phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
+				       dp83867->io_impedance &
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
 	}
 
 	/* Enable Interrupt output INT_OE in CFG3 register */
@@ -299,12 +287,11 @@ static int dp83867_config_init(struct phy_device *phydev)
 		dp83867_config_port_mirroring(phydev);
 
 	/* Clock output selection if muxing property is set */
-	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
-		val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
-		val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
-	}
+	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK)
+		phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_MASK,
+			       dp83867->clk_output_sel <<
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
 
 	return 0;
 }

drivers/net/phy/dp83tc811.c

@@ -144,11 +144,8 @@ static int dp83811_set_wol(struct phy_device *phydev,
 		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
 			      value);
 	} else {
-		value = phy_read_mmd(phydev, DP83811_DEVADDR,
-				     MII_DP83811_WOL_CFG);
-		value &= ~DP83811_WOL_EN;
-		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
-			      value);
+		phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+				   DP83811_WOL_EN);
 	}
 
 	return 0;
@@ -328,13 +325,9 @@ static int dp83811_suspend(struct phy_device *phydev)
 
 static int dp83811_resume(struct phy_device *phydev)
 {
-	int value;
-
 	genphy_resume(phydev);
 
-	value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
-
-	phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
+	phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
 			 DP83811_WOL_CLR_INDICATION);
 
 	return 0;

drivers/net/phy/marvell10g.c

@@ -58,24 +58,6 @@ struct mv3310_priv {
 	char *hwmon_name;
 };
 
-static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
-			 u16 mask, u16 bits)
-{
-	int old, val, ret;
-
-	old = phy_read_mmd(phydev, devad, reg);
-	if (old < 0)
-		return old;
-
-	val = (old & ~mask) | (bits & mask);
-	if (val == old)
-		return 0;
-
-	ret = phy_write_mmd(phydev, devad, reg, val);
-
-	return ret < 0 ? ret : 1;
-}
-
 #ifdef CONFIG_HWMON
 static umode_t mv3310_hwmon_is_visible(const void *data,
 				       enum hwmon_sensor_types type,
@@ -159,7 +141,7 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
 		return ret;
 
 	val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
-	ret = mv3310_modify(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
+	ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
 			     MV_V2_TEMP_CTRL_MASK, val);
 
 	return ret < 0 ? ret : 0;
@@ -363,7 +345,7 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 	linkmode_and(phydev->advertising, phydev->advertising,
 		     phydev->supported);
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
 			     ADVERTISE_ALL | ADVERTISE_100BASE4 |
 			     ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
 			     linkmode_adv_to_mii_adv_t(phydev->advertising));
@@ -373,7 +355,7 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 		changed = true;
 
 	reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
 			     ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
 	if (ret < 0)
 		return ret;
@@ -387,7 +369,7 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 	else
 		reg = 0;
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
 			     MDIO_AN_10GBT_CTRL_ADV10G, reg);
 	if (ret < 0)
 		return ret;

drivers/net/phy/phy-c45.c

@@ -75,15 +75,9 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
  */
 int genphy_c45_an_disable_aneg(struct phy_device *phydev)
 {
-	int val;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
-
-	val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
 
@@ -97,15 +91,8 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
  */
 int genphy_c45_restart_aneg(struct phy_device *phydev)
 {
-	int val;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
-
-	val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
-
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
 

drivers/net/phy/phy-core.c

@@ -414,15 +414,15 @@ static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
 }
 
 /**
- * phy_read_mmd - Convenience function for reading a register
+ * __phy_read_mmd - Convenience function for reading a register
  * from an MMD on a given PHY.
  * @phydev: The phy_device struct
  * @devad: The MMD to read from (0..31)
  * @regnum: The register on the MMD to read (0..65535)
  *
- * Same rules as for phy_read();
+ * Same rules as for __phy_read();
  */
-int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
 {
 	int val;
 
@@ -434,33 +434,52 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
 	} else if (phydev->is_c45) {
 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
 
-		val = mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
+		val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;
 
-		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
 
 		/* Read the content of the MMD's selected register */
 		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-		mutex_unlock(&bus->mdio_lock);
 	}
 	return val;
 }
+EXPORT_SYMBOL(__phy_read_mmd);
+
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(phy_read_mmd);
 
 /**
- * phy_write_mmd - Convenience function for writing a register
+ * __phy_write_mmd - Convenience function for writing a register
  * on an MMD on a given PHY.
  * @phydev: The phy_device struct
  * @devad: The MMD to read from
  * @regnum: The register on the MMD to read
  * @val: value to write to @regnum
  *
- * Same rules as for phy_write();
+ * Same rules as for __phy_write();
  */
-int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
 {
 	int ret;
 
@@ -472,23 +491,43 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
 	} else if (phydev->is_c45) {
 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
 
-		ret = mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
+		ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
 				      addr, val);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;
 
-		mutex_lock(&bus->mdio_lock);
 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
 
 		/* Write the data into MMD's selected register */
 		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
-		mutex_unlock(&bus->mdio_lock);
 
 		ret = 0;
 	}
 	return ret;
 }
+EXPORT_SYMBOL(__phy_write_mmd);
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_write_mmd(phydev, devad, regnum, val);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL(phy_write_mmd);
 
 /**
@@ -538,6 +577,57 @@ int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
 }
 EXPORT_SYMBOL_GPL(phy_modify);
 
+/**
+ * __phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * Unlocked helper function which allows a MMD register to be modified as
+ * new register value = (old register value & ~mask) | set
+ */
+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		     u16 mask, u16 set)
+{
+	int ret;
+
+	ret = __phy_read_mmd(phydev, devad, regnum);
+	if (ret < 0)
+		return ret;
+
+	ret = __phy_write_mmd(phydev, devad, regnum, (ret & ~mask) | set);
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL_GPL(__phy_modify_mmd);
+
+/**
+ * phy_modify_mmd - Convenience function for modifying a register on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @mask: bit mask of bits to clear
+ * @set: new value of bits set in mask to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		   u16 mask, u16 set)
+{
+	int ret;
+
+	mutex_lock(&phydev->mdio.bus->mdio_lock);
+	ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_modify_mmd);
+
 static int __phy_read_page(struct phy_device *phydev)
 {
 	return phydev->drv->read_page(phydev);

drivers/net/phy/phy.c

@@ -1060,17 +1060,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 		if (!phy_check_valid(phydev->speed, phydev->duplex, common))
 			goto eee_exit_err;
 
-		if (clk_stop_enable) {
+		if (clk_stop_enable)
 			/* Configure the PHY to stop receiving xMII
 			 * clock while it is signaling LPI.
 			 */
-			int val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
-			if (val < 0)
-				return val;
-
-			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
-			phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, val);
-		}
+			phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+					 MDIO_PCS_CTRL1_CLKSTOP_EN);
 
 		return 0; /* EEE supported */
 	}

include/linux/phy.h

@@ -692,17 +692,6 @@ static inline bool phy_is_started(struct phy_device *phydev)
 
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
 
-/**
- * phy_read_mmd - Convenience function for reading a register
- * from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- *
- * Same rules as for phy_read();
- */
-int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
-
 /**
  * phy_read - Convenience function for reading a given PHY register
  * @phydev: the phy_device struct
@@ -758,9 +747,60 @@ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val)
 			       val);
 }
 
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for phy_read();
+ */
+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
+
+/**
+ * __phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ *
+ * Same rules as for __phy_read();
+ */
+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
+
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to write to
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for phy_write();
+ */
+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+
+/**
+ * __phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to write to
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ *
+ * Same rules as for __phy_write();
+ */
+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+
 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
 int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
 
+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		u16 mask, u16 set);
+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+		u16 mask, u16 set);
+
 /**
  * __phy_set_bits - Convenience function for setting bits in a PHY register
  * @phydev: the phy_device struct
@@ -810,6 +850,66 @@ static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val)
 	return phy_modify(phydev, regnum, val, 0);
 }
 
+/**
+ * __phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ *
+ * The caller must have taken the MDIO bus lock.
+ */
+static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad,
+		u32 regnum, u16 val)
+{
+	return __phy_modify_mmd(phydev, devad, regnum, 0, val);
+}
+
+/**
+ * __phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ *
+ * The caller must have taken the MDIO bus lock.
+ */
+static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad,
+		u32 regnum, u16 val)
+{
+	return __phy_modify_mmd(phydev, devad, regnum, val, 0);
+}
+
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ */
+static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
+		u32 regnum, u16 val)
+{
+	return phy_modify_mmd(phydev, devad, regnum, 0, val);
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ */
+static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
+		u32 regnum, u16 val)
+{
+	return phy_modify_mmd(phydev, devad, regnum, val, 0);
+}
+
 /**
  * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
  * @phydev: the phy_device struct
@@ -886,18 +986,6 @@ static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev)
 	return phydev->is_pseudo_fixed_link;
 }
 
-/**
- * phy_write_mmd - Convenience function for writing a register
- * on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- *
- * Same rules as for phy_write();
- */
-int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-
 int phy_save_page(struct phy_device *phydev);
 int phy_select_page(struct phy_device *phydev, int page);
 int phy_restore_page(struct phy_device *phydev, int oldpage, int ret);