Skip to content

L
linux
Commit db8e3e20 authored by Michał Mirosław's avatar Michał Mirosław Committed by Mark Brown
Browse files
Options

ASoC: atmel_ssc_dai: rework DAI format configuration 

Rework DAI format calculation in preparation for adding more formats
later. As a side-effect this enables all CBM/CBS x CFM/CFS combinations
for supported formats. (Note: the additional modes are not tested.)

Note: this changes FSEDGE to POSITIVE for I2S CBM_CFS mode as the TXSYN
interrupt is not used anyway.
Signed-off-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/f5949b0326fdcdca072f3ed03f77de9e207631cd.1566677788.git.mirq-linux@rere.qmqm.plSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 18291410
Show whitespace changes
Inline Side-by-side
Showing with 81 additions and 207 deletions
sound/soc/atmel/atmel_ssc_dai.c
View file @ db8e3e20
......@@ -471,7 +471,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
int dir, channels, bits;
u32 tfmr, rfmr, tcmr, rcmr;
int ret;
int fslen, fslen_ext;
int fslen, fslen_ext, fs_osync, fs_edge;
u32 cmr_div;
u32 tcmr_period;
u32 rcmr_period;
......@@ -558,233 +558,107 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
/*
* Compute SSC register settings.
*/
switch (ssc_p->daifmt
& (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
/*
* I2S format, SSC provides BCLK and LRC clocks.
*
* The SSC transmit and receive clocks are generated
* from the MCK divider, and the BCLK signal
* is output on the SSC TK line.
*/
if (bits > 16 && !ssc->pdata->has_fslen_ext) {
dev_err(dai->dev,
"sample size %d is too large for SSC device\n",
bits);
return -EINVAL;
}
fslen_ext = (bits - 1) / 16;
fslen = (bits - 1) % 16;
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
| SSC_BF(RCMR_STTDLY, START_DELAY)
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
switch (ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
| SSC_BF(RFMR_FSLEN, fslen)
| SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));
case SND_SOC_DAIFMT_I2S:
fs_osync = SSC_FSOS_NEGATIVE;
fs_edge = SSC_START_FALLING_RF;
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
| SSC_BF(TCMR_STTDLY, START_DELAY)
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
rcmr = SSC_BF(RCMR_STTDLY, 1);
tcmr = SSC_BF(TCMR_STTDLY, 1);
tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
| SSC_BF(TFMR_FSLEN, fslen)
| SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));
break;
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
/* I2S format, CODEC supplies BCLK and LRC clocks. */
rcmr = SSC_BF(RCMR_PERIOD, 0)
| SSC_BF(RCMR_STTDLY, START_DELAY)
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_PIN : SSC_CKS_CLOCK);
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(RFMR_FSLEN, 0)
| SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));
case SND_SOC_DAIFMT_DSP_A:
/*
* DSP/PCM Mode A format
*
* Data is transferred on first BCLK after LRC pulse rising
* edge.If stereo, the right channel data is contiguous with
* the left channel data.
*/
fs_osync = SSC_FSOS_POSITIVE;
fs_edge = SSC_START_RISING_RF;
fslen = fslen_ext = 0;
tcmr = SSC_BF(TCMR_PERIOD, 0)
| SSC_BF(TCMR_STTDLY, START_DELAY)
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_CLOCK : SSC_CKS_PIN);
rcmr = SSC_BF(RCMR_STTDLY, 1);
tcmr = SSC_BF(TCMR_STTDLY, 1);
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(TFMR_FSLEN, 0)
| SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));
break;
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFS:
/* I2S format, CODEC supplies BCLK, SSC supplies LRCLK. */
if (bits > 16 && !ssc->pdata->has_fslen_ext) {
dev_err(dai->dev,
"sample size %d is too large for SSC device\n",
bits);
default:
printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
ssc_p->daifmt);
return -EINVAL;
}
fslen_ext = (bits - 1) / 16;
fslen = (bits - 1) % 16;
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
| SSC_BF(RCMR_STTDLY, START_DELAY)
| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_PIN : SSC_CKS_CLOCK);
rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
| SSC_BF(RFMR_FSLEN, fslen)
| SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
| SSC_BF(TCMR_STTDLY, START_DELAY)
| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_CLOCK : SSC_CKS_PIN);
if (!atmel_ssc_cfs(ssc_p)) {
fslen = fslen_ext = 0;
rcmr_period = tcmr_period = 0;
fs_osync = SSC_FSOS_NONE;
}
tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_NEGATIVE)
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
| SSC_BF(TFMR_FSLEN, fslen)
| SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));
break;
rcmr |= SSC_BF(RCMR_START, fs_edge);
tcmr |= SSC_BF(TCMR_START, fs_edge);
case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
if (atmel_ssc_cbs(ssc_p)) {
/*
* DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
* SSC provides BCLK
*
* The SSC transmit and receive clocks are generated from the
* MCK divider, and the BCLK signal is output
* on the SSC TK line.
*/
rcmr = SSC_BF(RCMR_PERIOD, rcmr_period)
| SSC_BF(RCMR_STTDLY, 1)
| SSC_BF(RCMR_START, SSC_START_RISING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
| SSC_BF(RFMR_FSLEN, 0)
| SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));
rcmr |= SSC_BF(RCMR_CKS, SSC_CKS_DIV)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE);
tcmr = SSC_BF(TCMR_PERIOD, tcmr_period)
| SSC_BF(TCMR_STTDLY, 1)
| SSC_BF(TCMR_START, SSC_START_RISING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
tcmr |= SSC_BF(TCMR_CKS, SSC_CKS_DIV)
| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS);
} else {
rcmr |= SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_PIN : SSC_CKS_CLOCK)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE);
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
| SSC_BF(TFMR_FSLEN, 0)
| SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));
break;
tcmr |= SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_CLOCK : SSC_CKS_PIN)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE);
}
case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
/*
* DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
*
* Data is transferred on first BCLK after LRC pulse rising
* edge.If stereo, the right channel data is contiguous with
* the left channel data.
*/
rcmr = SSC_BF(RCMR_PERIOD, 0)
| SSC_BF(RCMR_STTDLY, START_DELAY)
| SSC_BF(RCMR_START, SSC_START_RISING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_PIN : SSC_CKS_CLOCK);
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(RFMR_FSLEN, 0)
rcmr |= SSC_BF(RCMR_PERIOD, rcmr_period)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING);
tcmr |= SSC_BF(TCMR_PERIOD, tcmr_period)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING);
rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, fs_osync)
| SSC_BF(RFMR_FSLEN, fslen)
| SSC_BF(RFMR_DATNB, (channels - 1))
| SSC_BIT(RFMR_MSBF)
| SSC_BF(RFMR_LOOP, 0)
| SSC_BF(RFMR_DATLEN, (bits - 1));
tcmr = SSC_BF(TCMR_PERIOD, 0)
| SSC_BF(TCMR_STTDLY, START_DELAY)
| SSC_BF(TCMR_START, SSC_START_RISING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
SSC_CKS_CLOCK : SSC_CKS_PIN);
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
| SSC_BF(TFMR_FSLEN, 0)
| SSC_BF(TFMR_FSOS, fs_osync)
| SSC_BF(TFMR_FSLEN, fslen)
| SSC_BF(TFMR_DATNB, (channels - 1))
| SSC_BIT(TFMR_MSBF)
| SSC_BF(TFMR_DATDEF, 0)
| SSC_BF(TFMR_DATLEN, (bits - 1));
break;
default:
printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
ssc_p->daifmt);
if (fslen_ext && !ssc->pdata->has_fslen_ext) {
dev_err(dai->dev, "sample size %d is too large for SSC device\n",
bits);
return -EINVAL;
}
pr_debug("atmel_ssc_hw_params: "
"RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
rcmr, rfmr, tcmr, tfmr);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7