parport: Convert printk(KERN_<LEVEL> to pr_<level>(

Use the more common kernel style.

Miscellanea:

o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20200403134325.11523-2-sudipm.mukherjee@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/parport/daisy.c

@@ -145,8 +145,7 @@ int parport_daisy_init(struct parport *port)
 	    ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
 		/* Leave original as port zero. */
 		port->muxport = 0;
-		printk(KERN_INFO
-			"%s: 1st (default) port of %d-way multiplexor\n",
+		pr_info("%s: 1st (default) port of %d-way multiplexor\n",
 			port->name, num_ports);
 		for (i = 1; i < num_ports; i++) {
 			/* Clone the port. */
@@ -159,8 +158,7 @@ int parport_daisy_init(struct parport *port)
 				continue;
 			}
 
-			printk(KERN_INFO
-				"%s: %d%s port of %d-way multiplexor on %s\n",
+			pr_info("%s: %d%s port of %d-way multiplexor on %s\n",
 				extra->name, i + 1, th[i + 1], num_ports,
 				port->name);
 

drivers/parport/ieee1284.c

@@ -319,7 +319,7 @@ int parport_negotiate (struct parport *port, int mode)
 #ifndef CONFIG_PARPORT_1284
 	if (mode == IEEE1284_MODE_COMPAT)
 		return 0;
-	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	pr_err("parport: IEEE1284 not supported in this kernel\n");
 	return -1;
 #else
 	int m = mode & ~IEEE1284_ADDR;
@@ -674,7 +674,7 @@ ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
 ssize_t parport_read (struct parport *port, void *buffer, size_t len)
 {
 #ifndef CONFIG_PARPORT_1284
-	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	pr_err("parport: IEEE1284 not supported in this kernel\n");
 	return -ENODEV;
 #else
 	int mode = port->physport->ieee1284.mode;

drivers/parport/ieee1284_ops.c

@@ -579,8 +579,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 			pr_debug("ECP read timed out at 45\n");
 
 			if (command)
-				printk (KERN_WARNING
-					"%s: command ignored (%02x)\n",
+				pr_warn("%s: command ignored (%02x)\n",
 					port->name, byte);
 
 			break;

drivers/parport/parport_amiga.c

@@ -212,7 +212,7 @@ static int __init amiga_parallel_probe(struct platform_device *pdev)
 	if (err)
 		goto out_irq;
 
-	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+	pr_info("%s: Amiga built-in port using irq\n", p->name);
 	/* XXX: set operating mode */
 	parport_announce_port(p);
 

drivers/parport/parport_atari.c

@@ -200,7 +200,7 @@ static int __init parport_atari_init(void)
 		}
 
 		this_port = p;
-		printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
+		pr_info("%s: Atari built-in port using irq\n", p->name);
 		parport_announce_port (p);
 
 		return 0;

drivers/parport/parport_cs.c

@@ -142,10 +142,8 @@ static int parport_config(struct pcmcia_device *link)
 			      link->irq, PARPORT_DMA_NONE,
 			      &link->dev, IRQF_SHARED);
     if (p == NULL) {
-	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
-	       "0x%3x, irq %u failed\n",
-	       (unsigned int) link->resource[0]->start,
-	       link->irq);
+	    pr_notice("parport_cs: parport_pc_probe_port() at 0x%3x, irq %u failed\n",
+		      (unsigned int)link->resource[0]->start, link->irq);
 	goto failed;
     }
 

drivers/parport/parport_gsc.c

@@ -282,7 +282,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
 	p->private_data = priv;
 
-	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	pr_info("%s: PC-style at 0x%lx", p->name, p->base);
 	p->irq = irq;
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
@@ -315,8 +315,7 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	if (p->irq != PARPORT_IRQ_NONE) {
 		if (request_irq (p->irq, parport_irq_handler,
 				 0, p->name, p)) {
-			printk (KERN_WARNING "%s: irq %d in use, "
-				"resorting to polled operation\n",
+			pr_warn("%s: irq %d in use, resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
 			p->dma = PARPORT_DMA_NONE;
@@ -347,7 +346,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
 	unsigned long port;
 
 	if (!dev->irq) {
-		printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+		pr_warn("IRQ not found for parallel device at 0x%llx\n",
 			(unsigned long long)dev->hpa.start);
 		return -ENODEV;
 	}

drivers/parport/parport_ip32.c

@@ -1337,8 +1337,7 @@ static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
 			ecr = parport_ip32_read_econtrol(p);
 			if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
 			    && !lost_interrupt) {
-				printk(KERN_WARNING PPIP32
-				       "%s: lost interrupt in %s\n",
+				pr_warn(PPIP32 "%s: lost interrupt in %s\n",
 					p->name, __func__);
 				lost_interrupt = 1;
 			}
@@ -1643,7 +1642,7 @@ static size_t parport_ip32_compat_write_data(struct parport *p,
 				       DSR_nBUSY | DSR_nFAULT)) {
 		/* Avoid to flood the logs */
 		if (ready_before)
-			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			pr_info(PPIP32 "%s: not ready in %s\n",
 				p->name, __func__);
 		ready_before = 0;
 		goto stop;
@@ -1724,7 +1723,7 @@ static size_t parport_ip32_ecp_write_data(struct parport *p,
 				       DSR_nBUSY | DSR_nFAULT)) {
 		/* Avoid to flood the logs */
 		if (ready_before)
-			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			pr_info(PPIP32 "%s: not ready in %s\n",
 				p->name, __func__);
 		ready_before = 0;
 		goto stop;
@@ -2064,8 +2063,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	p->modes |= PARPORT_MODE_TRISTATE;
 
 	if (!parport_ip32_fifo_supported(p)) {
-		printk(KERN_WARNING PPIP32
-		       "%s: error: FIFO disabled\n", p->name);
+		pr_warn(PPIP32 "%s: error: FIFO disabled\n", p->name);
 		/* Disable hardware modes depending on a working FIFO. */
 		features &= ~PARPORT_IP32_ENABLE_SPP;
 		features &= ~PARPORT_IP32_ENABLE_ECP;
@@ -2077,8 +2075,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	if (features & PARPORT_IP32_ENABLE_IRQ) {
 		int irq = MACEISA_PARALLEL_IRQ;
 		if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
-			printk(KERN_WARNING PPIP32
-			       "%s: error: IRQ disabled\n", p->name);
+			pr_warn(PPIP32 "%s: error: IRQ disabled\n", p->name);
 			/* DMA cannot work without interrupts. */
 			features &= ~PARPORT_IP32_ENABLE_DMA;
 		} else {
@@ -2091,8 +2088,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	/* Allocate DMA resources */
 	if (features & PARPORT_IP32_ENABLE_DMA) {
 		if (parport_ip32_dma_register())
-			printk(KERN_WARNING PPIP32
-			       "%s: error: DMA disabled\n", p->name);
+			pr_warn(PPIP32 "%s: error: DMA disabled\n", p->name);
 		else {
 			pr_probe(p, "DMA support enabled\n");
 			p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
@@ -2134,8 +2130,7 @@ static __init struct parport *parport_ip32_probe_port(void)
 	parport_ip32_dump_state(p, "end init", 0);
 
 	/* Print out what we found */
-	printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
-	       p->name, p->base, p->base_hi);
+	pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi);
 	if (p->irq != PARPORT_IRQ_NONE)
 		printk(", irq %d", p->irq);
 	printk(" [");

drivers/parport/parport_mfc3.c

@@ -325,7 +325,7 @@ static int __init parport_mfc3_init(void)
 		p->dev = &z->dev;
 
 		this_port[pias++] = p;
-		printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
+		pr_info("%s: Multiface III port using irq\n", p->name);
 		/* XXX: set operating mode */
 
 		p->private_data = (void *)piabase;

drivers/parport/parport_sunbpp.c

@@ -314,7 +314,7 @@ static int bpp_probe(struct platform_device *op)
 	value_tcr &= ~P_TCR_DIR;
 	sbus_writeb(value_tcr, &regs->p_tcr);
 
-	printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base);
+	pr_info("%s: sunbpp at 0x%lx\n", p->name, p->base);
 
 	dev_set_drvdata(&op->dev, p);
 

drivers/parport/probe.c

@@ -38,7 +38,7 @@ static void pretty_print(struct parport *port, int device)
 {
 	struct parport_device_info *info = &port->probe_info[device + 1];
 
-	printk(KERN_INFO "%s", port->name);
+	pr_info("%s", port->name);
 
 	if (device >= 0)
 		printk (" (addr %d)", device);
@@ -58,7 +58,7 @@ static void parse_data(struct parport *port, int device, char *str)
 	struct parport_device_info *info = &port->probe_info[device + 1];
 
 	if (!txt) {
-		printk(KERN_WARNING "%s probe: memory squeeze\n", port->name);
+		pr_warn("%s probe: memory squeeze\n", port->name);
 		return;
 	}
 	strcpy(txt, str);
@@ -98,7 +98,8 @@ static void parse_data(struct parport *port, int device, char *str)
 						goto rock_on;
 					}
 				}
-				printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep);
+				pr_warn("%s probe: warning, class '%s' not understood\n",
+					port->name, sep);
 				info->class = PARPORT_CLASS_OTHER;
 			} else if (!strcmp(p, "CMD") ||
 				   !strcmp(p, "COMMAND SET")) {

drivers/parport/share.c

@@ -554,7 +554,7 @@ void parport_announce_port(struct parport *port)
 #endif
 
 	if (!port->dev)
-		printk(KERN_WARNING "%s: fix this legacy no-device port driver!\n",
+		pr_warn("%s: fix this legacy no-device port driver!\n",
 			port->name);
 
 	parport_proc_register(port);
@@ -727,7 +727,8 @@ parport_register_device(struct parport *port, const char *name,
 
 	if (flags & PARPORT_DEV_LURK) {
 		if (!pf || !kf) {
-			printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name);
+			pr_info("%s: refused to register lurking device (%s) without callbacks\n",
+				port->name, name);
 			return NULL;
 		}
 	}
@@ -996,7 +997,7 @@ void parport_unregister_device(struct pardevice *dev)
 
 #ifdef PARPORT_PARANOID
 	if (!dev) {
-		printk(KERN_ERR "parport_unregister_device: passed NULL\n");
+		pr_err("%s: passed NULL\n", __func__);
 		return;
 	}
 #endif
@@ -1137,8 +1138,7 @@ int parport_claim(struct pardevice *dev)
 	unsigned long flags;
 
 	if (port->cad == dev) {
-		printk(KERN_INFO "%s: %s already owner\n",
-		       dev->port->name,dev->name);
+		pr_info("%s: %s already owner\n", dev->port->name, dev->name);
 		return 0;
 	}
 
@@ -1158,8 +1158,7 @@ int parport_claim(struct pardevice *dev)
 			 * I think we'll actually deadlock rather than
 			 * get here, but just in case..
 			 */
-			printk(KERN_WARNING
-			       "%s: %s released port when preempted!\n",
+			pr_warn("%s: %s released port when preempted!\n",
 				port->name, oldcad->name);
 			if (port->cad)
 				goto blocked;
@@ -1320,7 +1319,7 @@ void parport_release(struct pardevice *dev)
 	write_lock_irqsave(&port->cad_lock, flags);
 	if (port->cad != dev) {
 		write_unlock_irqrestore(&port->cad_lock, flags);
-		printk(KERN_WARNING "%s: %s tried to release parport when not owner\n",
+		pr_warn("%s: %s tried to release parport when not owner\n",
 			port->name, dev->name);
 		return;
 	}
@@ -1361,7 +1360,8 @@ void parport_release(struct pardevice *dev)
 			if (dev->port->cad) /* racy but no matter */
 				return;
 		} else {
-			printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name);
+			pr_err("%s: don't know how to wake %s\n",
+			       port->name, pd->name);
 		}
 	}