EDAC/synopsys: Read the error count from the correct register

Currently, the error count is read wrongly from the status register. Read
the count from the proper error count register (ERRCNT).

  [ bp: Massage. ]

Fixes: b500b4a0 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com

drivers/edac/synopsys_edac.c

@@ -164,6 +164,11 @@
 #define ECC_STAT_CECNT_SHIFT		8
 #define ECC_STAT_BITNUM_MASK		0x7F
 
+/* ECC error count register definitions */
+#define ECC_ERRCNT_UECNT_MASK		0xFFFF0000
+#define ECC_ERRCNT_UECNT_SHIFT		16
+#define ECC_ERRCNT_CECNT_MASK		0xFFFF
+
 /* DDR QOS Interrupt register definitions */
 #define DDR_QOS_IRQ_STAT_OFST		0x20200
 #define DDR_QOSUE_MASK			0x4
@@ -423,15 +428,16 @@ static int zynqmp_get_error_info(struct synps_edac_priv *priv)
 	base = priv->baseaddr;
 	p = &priv->stat;
 
+	regval = readl(base + ECC_ERRCNT_OFST);
+	p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK;
+	p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT;
+	if (!p->ce_cnt)
+		goto ue_err;
+
 	regval = readl(base + ECC_STAT_OFST);
 	if (!regval)
 		return 1;
 
-	p->ce_cnt = (regval & ECC_STAT_CECNT_MASK) >> ECC_STAT_CECNT_SHIFT;
-	p->ue_cnt = (regval & ECC_STAT_UECNT_MASK) >> ECC_STAT_UECNT_SHIFT;
-	if (!p->ce_cnt)
-		goto ue_err;
-
 	p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK);
 
 	regval = readl(base + ECC_CEADDR0_OFST);