From e303840d5030de3ef4e751985b5458c6f095a539 Mon Sep 17 00:00:00 2001 From: BingJing Chang <bingjingc@synology.com> Date: Thu, 28 Jun 2018 18:40:11 +0800 Subject: [PATCH] md/raid10: fix that replacement cannot complete recovery after reassemble [ Upstream commit bda3153998f3eb2cafa4a6311971143628eacdbc ] During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/md/raid10.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index b138b5cba286..6da66c3acd46 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3734,6 +3734,13 @@ static int raid10_run(struct mddev *mddev) disk->rdev->saved_raid_disk < 0) conf->fullsync = 1; } + + if (disk->replacement && + !test_bit(In_sync, &disk->replacement->flags) && + disk->replacement->saved_raid_disk < 0) { + conf->fullsync = 1; + } + disk->recovery_disabled = mddev->recovery_disabled - 1; } -- 2.30.9