arm64: dts: qcom: Use plural _gpios node label for PMIC gpios

The gpio node in PMIC dts'es define access to multiple GPIOs.  Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.

Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org

arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts

@@ -113,7 +113,7 @@ gpio-keys {
 			    <&cam_snapshot_pin_a>;
 		button-vol-up {
 			label = "Volume Up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEUP>;
 			gpio-key,wakeup;
@@ -122,7 +122,7 @@ button-vol-up {
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
-			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
@@ -130,7 +130,7 @@ button-camera-snapshot {
 
 		button-camera-focus {
 			label = "Camera Focus";
-			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
@@ -338,7 +338,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";

arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts

@@ -23,7 +23,7 @@ leds {
 		pinctrl-0 = <&button_backlight_default>;
 
 		led-keypad-backlight {
-			gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			default-state = "off";
@@ -31,7 +31,7 @@ led-keypad-backlight {
 	};
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	button_backlight_default: button-backlight-state {
 		pins = "gpio5";
 		function = "gpio";

arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi

@@ -92,7 +92,7 @@ gpio-keys {
 
 		button-vol-down {
 			label = "Volume down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -100,7 +100,7 @@ button-vol-down {
 
 		button-vol-up {
 			label = "Volume up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -269,7 +269,7 @@ pm8005_s1: s1 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_keys_default: vol-keys-state {
 		pins = "gpio5", "gpio6";
 		function = "normal";

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts

@@ -20,7 +20,7 @@ disp_dvdd_vreg: disp-dvdd-vreg {
 		regulator-max-microvolt = <1350000>;
 		startup-delay-us = <0>;
 		enable-active-high;
-		gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&disp_dvdd_en>;
 	};
@@ -37,7 +37,7 @@ &lab {
 	qcom,soft-start-us = <200>;
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	disp_dvdd_en: disp-dvdd-en-active-state {
 		pins = "gpio10";
 		function = "normal";

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi

@@ -25,7 +25,7 @@ div1_mclk: divclk1 {
 			pinctrl-names = "default";
 			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
 			#clock-cells = <0>;
-			enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+			enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -65,7 +65,7 @@ cam_vio_vreg: cam-vio-vreg {
 		regulator-name = "cam_vio_vreg";
 		startup-delay-us = <0>;
 		enable-active-high;
-		gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_vio_default>;
 		vin-supply = <&vreg_lvs1a_1p8>;
@@ -103,7 +103,7 @@ gpio-keys {
 			    <&cam_snapshot_pin_a>;
 		button-vol-down {
 			label = "Volume Down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			gpio-key,wakeup;
@@ -112,7 +112,7 @@ button-vol-down {
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
-			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
@@ -120,7 +120,7 @@ button-camera-snapshot {
 
 		button-camera-focus {
 			label = "Camera Focus";
-			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
@@ -187,7 +187,7 @@ ramoops@ffc00000 {
 
 	vibrator {
 		compatible = "gpio-vibrator";
-		enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vib_default>;
 	};
@@ -303,7 +303,7 @@ pm8005_s1: s1 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_down_pin_a: vol-down-active-state {
 		pins = "gpio5";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -335,7 +335,7 @@ audio_mclk_pin: audio-mclk-pin-active-state {
 	};
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	cam_vio_default: cam-vio-active-state {
 		pins = "gpio1";
 		function = PMIC_GPIO_FUNC_NORMAL;

arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts

@@ -133,7 +133,7 @@ gpio-keys {
 
 		key-vol-up {
 			label = "Volume up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -278,7 +278,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_key_default: vol-up-key-default-state {
 		pins = "gpio6";
 		function = "normal";

arch/arm64/boot/dts/qcom/pm6125.dtsi

@@ -136,11 +136,11 @@ pm6125_rtc: rtc@6000 {
 			status = "disabled";
 		};
 
-		pm6125_gpio: gpio@c000 {
+		pm6125_gpios: gpio@c000 {
 			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6125_gpio 0 0 9>;
+			gpio-ranges = <&pm6125_gpios 0 0 9>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pm6150.dtsi

@@ -88,11 +88,11 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150_gpio: gpio@c000 {
+		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6150_gpio 0 0 10>;
+			gpio-ranges = <&pm6150_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pm6150l.dtsi

@@ -95,11 +95,11 @@ pm6150l_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150l_gpio: gpio@c000 {
+		pm6150l_gpios: gpio@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6150l_gpio 0 0 12>;
+			gpio-ranges = <&pm6150l_gpios 0 0 12>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pm8005.dtsi

@@ -11,11 +11,11 @@ pm8005_lsid0: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8005_gpio: gpio@c000 {
+		pm8005_gpios: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8005_gpio 0 0 4>;
+			gpio-ranges = <&pm8005_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pm8950.dtsi

@@ -141,11 +141,11 @@ pm8950_mpps: mpps@a000 {
 			#interrupt-cells = <2>;
 		};
 
-		pm8950_gpio: gpio@c000 {
+		pm8950_gpios: gpio@c000 {
 			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8950_gpio 0 0 8>;
+			gpio-ranges = <&pm8950_gpios 0 0 8>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pm8998.dtsi

@@ -109,11 +109,11 @@ rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm8998_gpio: gpio@c000 {
+		pm8998_gpios: gpio@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8998_gpio 0 0 26>;
+			gpio-ranges = <&pm8998_gpios 0 0 26>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pmi8950.dtsi

@@ -67,11 +67,11 @@ pmi8950_mpps: mpps@a000 {
 			#interrupt-cells = <2>;
 		};
 
-		pmi8950_gpio: gpio@c000 {
+		pmi8950_gpios: gpio@c000 {
 			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmi8950_gpio 0 0 2>;
+			gpio-ranges = <&pmi8950_gpios 0 0 2>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/pmi8998.dtsi

@@ -9,11 +9,11 @@ pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8998_gpio: gpio@c000 {
+		pmi8998_gpios: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmi8998_gpio 0 0 14>;
+			gpio-ranges = <&pmi8998_gpios 0 0 14>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/sc7180-idp.dts

@@ -304,7 +304,7 @@ panel@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&disp_pins>;
 
-		reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
 
 		ports {
 			#address-cells = <1>;
@@ -485,7 +485,7 @@ wifi-firmware {
 
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
-&pm6150l_gpio {
+&pm6150l_gpios {
 	disp_pins: disp-state {
 		pinconf {
 			pins = "gpio3";

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi

@@ -1159,11 +1159,11 @@ &sec_mi2s_active {
 
 /* PINCTRL - board-specific pinctrl */
 
-&pm6150_gpio {
+&pm6150_gpios {
 	status = "disabled"; /* No GPIOs are connected */
 };
 
-&pm6150l_gpio {
+&pm6150l_gpios {
 	gpio-line-names = "AP_SUSPEND",
 			  "",
 			  "",

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi

@@ -1096,7 +1096,7 @@ pinconf-rx {
 };
 
 /* PINCTRL - board-specific pinctrl */
-&pm8005_gpio {
+&pm8005_gpios {
 	gpio-line-names = "",
 			  "",
 			  "SLB",
@@ -1130,7 +1130,7 @@ adc-chan@51 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	gpio-line-names = "",
 			  "",
 			  "SW_CTRL",

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -54,7 +54,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -65,7 +65,7 @@ led-0 {
 			label = "green:user4";
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "panic-indicator";
 			default-state = "off";
 		};
@@ -74,7 +74,7 @@ led-1 {
 			label = "yellow:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
@@ -83,7 +83,7 @@ led-2 {
 			label = "blue:bt";
 			function = LED_FUNCTION_BLUETOOTH;
 			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "bluetooth-power";
 			default-state = "off";
 		};
@@ -148,7 +148,7 @@ cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <1200000>;
 		enable-active-high;
-		gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
+		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
 		vin-supply = <&vbat>;
@@ -160,7 +160,7 @@ cam0_avdd_2v8: reg_cam0_avdd_2v8 {
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
 		enable-active-high;
-		gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
 		vin-supply = <&vbat>;
@@ -559,7 +559,7 @@ &pcie1_phy {
 	vdda-pll-supply = <&vreg_l26a_1p2>;
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	gpio-line-names =
 		"NC",
 		"NC",
@@ -1170,7 +1170,7 @@ pinconf-rx {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 
 };
 

arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi

@@ -132,7 +132,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -603,7 +603,7 @@ pinconf {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

@@ -37,14 +37,14 @@ gpio-keys {
 		key-vol-down {
 			label = "Volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 
 		key-vol-up {
 			label = "Volume up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -440,7 +440,7 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_down_gpio: pm8998-gpio5-state {
 		pinconf {
 			pins = "gpio5";

arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts

@@ -54,7 +54,7 @@ gpio-keys {
 		key-vol-up {
 			label = "volume_up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -510,7 +510,7 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			pins = "gpio6";

arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi

@@ -21,7 +21,7 @@ gpio-keys {
 
 		key-vol-down {
 			label = "volume_down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <15>;
 			gpio-key,wakeup;

arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi

@@ -46,7 +46,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -304,7 +304,7 @@ &ipa {
 	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";

arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts

@@ -55,7 +55,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -518,7 +518,7 @@ &pmi8998_wled {
 	status = "okay";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;

arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts

@@ -46,7 +46,7 @@ gpio-keys {
 		key-volume-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm6125_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
 			gpio-key,wakeup;
@@ -59,7 +59,7 @@ &dispcc {
 	status = "disabled";
 };
 
-&pm6125_gpio {
+&pm6125_gpios {
 	vol_up_n: vol-up-n-state {
 		pins = "gpio5";
 		function = "normal";

arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts

@@ -217,7 +217,7 @@ rf-pa1-therm@3 {
 	};
 };
 
-&pm6125_gpio {
+&pm6125_gpios {
 	camera_flash_therm: camera-flash-therm-state {
 		pins = "gpio3";
 		function = PMIC_GPIO_FUNC_NORMAL;