Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the DA9063 as used on the HiFive Unmatched.

 - Support for relative extables, which puts us in line with other
   architectures and save some space in vmlinux.

 - A handful of kexec fixes/improvements, including the ability to run
   crash kernels from PCI-addressable memory on the HiFive Unmatched.

 - Support for the SBI SRST extension, which allows systems that do not
   have an explicit driver in Linux to reboot.

 - A handful of fixes and cleanups, including to the defconfigs and
   device trees.

* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  RISC-V: Use SBI SRST extension when available
  riscv: mm: fix wrong phys_ram_base value for RV64
  RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
  riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
  riscv: errata: alternative: mark vendor_patch_func __initdata
  riscv: head: make secondary_start_common() static
  riscv: remove cpu_stop()
  riscv: try to allocate crashkern region from 32bit addressible memory
  riscv: use hart id instead of cpu id on machine_kexec
  riscv: Don't use va_pa_offset on kdump
  riscv: dts: sifive: fu540-c000: Fix PLIC node
  riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
  riscv: dts: sifive: Group tuples in register properties
  riscv: dts: sifive: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Fix clock controller node
  riscv: dts: microchip: mpfs: Fix reference clock node
  riscv: dts: microchip: mpfs: Fix PLIC node
  riscv: dts: microchip: mpfs: Drop empty chosen node
  riscv: dts: canaan: Group tuples in interrupt properties
  ...

arch/riscv/Kconfig

@@ -14,6 +14,7 @@ config RISCV
 	def_bool y
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
+	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_HAS_BINFMT_FLAT
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
@@ -75,6 +76,7 @@ config RISCV
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
 	select HAVE_ASM_MODVERSIONS
@@ -279,7 +281,7 @@ choice
 		depends on 32BIT
 		bool "1GiB"
 	config MAXPHYSMEM_2GB
-		depends on 64BIT && CMODEL_MEDLOW
+		depends on 64BIT
 		bool "2GiB"
 	config MAXPHYSMEM_128GB
 		depends on 64BIT && CMODEL_MEDANY

arch/riscv/boot/dts/canaan/k210.dtsi

@@ -103,8 +103,8 @@ rom0: nvmem@1000 {
 		clint0: timer@2000000 {
 			compatible = "canaan,k210-clint", "sifive,clint0";
 			reg = <0x2000000 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-					      &cpu1_intc 3 &cpu1_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>;
 		};
 
 		plic0: interrupt-controller@c000000 {
@@ -113,7 +113,7 @@ plic0: interrupt-controller@c000000 {
 			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
 			reg = <0xC000000 0x4000000>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>;
 			riscv,ndev = <65>;
 		};
 
@@ -130,10 +130,11 @@ gpio0: gpio-controller@38001000 {
 			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
 			reg = <0x38001000 0x1000>;
 			interrupt-controller;
-			interrupts = <34 35 36 37 38 39 40 41
-				      42 43 44 45 46 47 48 49
-				      50 51 52 53 54 55 56 57
-				      58 59 60 61 62 63 64 65>;
+			interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
+				     <41>, <42>, <43>, <44>, <45>, <46>, <47>,
+				     <48>, <49>, <50>, <51>, <52>, <53>, <54>,
+				     <55>, <56>, <57>, <58>, <59>, <60>, <61>,
+				     <62>, <63>, <64>, <65>;
 			gpio-controller;
 			ngpios = <32>;
 		};
@@ -141,7 +142,7 @@ gpio0: gpio-controller@38001000 {
 		dmac0: dma-controller@50000000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x50000000 0x1000>;
-			interrupts = <27 28 29 30 31 32>;
+			interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
 			#dma-cells = <1>;
 			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
 			clock-names = "core-clk", "cfgr-clk";
@@ -316,7 +317,7 @@ fpioa: pinmux@502b0000 {
 			timer0: timer@502d0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502D0000 0x100>;
-				interrupts = <14 15>;
+				interrupts = <14>, <15>;
 				clocks = <&sysclk K210_CLK_TIMER0>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -326,7 +327,7 @@ timer0: timer@502d0000 {
 			timer1: timer@502e0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502E0000 0x100>;
-				interrupts = <16 17>;
+				interrupts = <16>, <17>;
 				clocks = <&sysclk K210_CLK_TIMER1>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";
@@ -336,7 +337,7 @@ timer1: timer@502e0000 {
 			timer2: timer@502f0000 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x502F0000 0x100>;
-				interrupts = <18 19>;
+				interrupts = <18>, <19>;
 				clocks = <&sysclk K210_CLK_TIMER2>,
 					 <&sysclk K210_CLK_APB0>;
 				clock-names = "timer", "pclk";

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

@@ -199,7 +199,7 @@ slot@0 {
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

@@ -201,7 +201,7 @@ slot@0 {
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

@@ -209,7 +209,7 @@ slot@0 {
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

@@ -174,7 +174,7 @@ slot@0 {
 };
 
 &spi3 {
-	spi-flash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;

arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts

@@ -35,6 +35,10 @@ memory@80000000 {
 	};
 };
 
+&refclk {
+	clock-frequency = <600000000>;
+};
+
 &serial0 {
 	status = "okay";
 };

arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi

@@ -9,9 +9,6 @@ / {
 	model = "Microchip PolarFire SoC";
 	compatible = "microchip,mpfs";
 
-	chosen {
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -142,6 +139,11 @@ cpu4_intc: interrupt-controller {
 		};
 	};
 
+	refclk: msspllclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -156,62 +158,48 @@ cache-controller@2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 
 		clint@2000000 {
 			compatible = "sifive,fu540-c000-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0xC000>;
-			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7
-						&cpu2_intc 3 &cpu2_intc 7
-						&cpu3_intc 3 &cpu3_intc 7
-						&cpu4_intc 3 &cpu4_intc 7>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>;
 		};
 
 		plic: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <186>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11
-					&cpu1_intc 11 &cpu1_intc 9
-					&cpu2_intc 11 &cpu2_intc 9
-					&cpu3_intc 11 &cpu3_intc 9
-					&cpu4_intc 11 &cpu4_intc 9>;
+			interrupts-extended = <&cpu0_intc 11>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>,
+					      <&cpu2_intc 11>, <&cpu2_intc 9>,
+					      <&cpu3_intc 11>, <&cpu3_intc 9>,
+					      <&cpu4_intc 11>, <&cpu4_intc 9>;
+			riscv,ndev = <186>;
 		};
 
 		dma@3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 
-		refclk: refclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <600000000>;
-			clock-output-names = "msspllclk";
-		};
-
 		clkcfg: clkcfg@20002000 {
 			compatible = "microchip,mpfs-clkcfg";
 			reg = <0x0 0x20002000 0x0 0x1000>;
-			reg-names = "mss_sysreg";
 			clocks = <&refclk>;
 			#clock-cells = <1>;
-			clock-output-names = "cpu", "axi", "ahb", "envm",	/* 0-3   */
-				 "mac0", "mac1", "mmc", "timer",		/* 4-7   */
-				"mmuart0", "mmuart1", "mmuart2", "mmuart3",	/* 8-11  */
-				"mmuart4", "spi0", "spi1", "i2c0",		/* 12-15 */
-				"i2c1", "can0", "can1", "usb",			/* 16-19 */
-				"rsvd", "rtc", "qspi", "gpio0",			/* 20-23 */
-				"gpio1", "gpio2", "ddrc", "fic0",		/* 24-27 */
-				"fic1", "fic2", "fic3", "athena", "cfm";	/* 28-32 */
 		};
 
 		serial0: serial@20000000 {
@@ -267,7 +255,7 @@ mmc: mmc@20008000 {
 			compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc";
 			reg = <0x0 0x20008000 0x0 0x1000>;
 			interrupt-parent = <&plic>;
-			interrupts = <88 89>;
+			interrupts = <88>, <89>;
 			clocks = <&clkcfg 6>;
 			max-frequency = <200000000>;
 			status = "disabled";
@@ -277,7 +265,7 @@ emac0: ethernet@20110000 {
 			compatible = "cdns,macb";
 			reg = <0x0 0x20110000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <64 65 66 67>;
+			interrupts = <64>, <65>, <66>, <67>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 4>, <&clkcfg 2>;
 			clock-names = "pclk", "hclk";
@@ -290,7 +278,7 @@ emac1: ethernet@20112000 {
 			compatible = "cdns,macb";
 			reg = <0x0 0x20112000 0x0 0x2000>;
 			interrupt-parent = <&plic>;
-			interrupts = <70 71 72 73>;
+			interrupts = <70>, <71>, <72>, <73>;
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg 5>, <&clkcfg 2>;
 			status = "disabled";

arch/riscv/boot/dts/sifive/fu540-c000.dtsi

@@ -137,20 +137,21 @@ cpu4_intc: interrupt-controller {
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
-		compatible = "sifive,fu540-c000", "sifive,fu540", "simple-bus";
+		compatible = "simple-bus";
 		ranges;
 		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
 			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
 			reg = <0x0 0xc000000 0x0 0x4000000>;
-			riscv,ndev = <53>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
+			riscv,ndev = <53>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu540-c000-prci";
@@ -170,7 +171,8 @@ dma: dma@3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <23 24 25 26 27 28 29 30>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>;
 			#dma-cells = <1>;
 		};
 		uart1: serial@10011000 {
@@ -195,8 +197,8 @@ i2c0: i2c@10030000 {
 		};
 		qspi0: spi@10040000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10040000 0x0 0x1000
-			       0x0 0x20000000 0x0 0x10000000>;
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -206,8 +208,8 @@ qspi0: spi@10040000 {
 		};
 		qspi1: spi@10041000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
-			reg = <0x0 0x10041000 0x0 0x1000
-			       0x0 0x30000000 0x0 0x10000000>;
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
@@ -229,8 +231,8 @@ eth0: ethernet@10090000 {
 			compatible = "sifive,fu540-c000-gem";
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			reg = <0x0 0x10090000 0x0 0x2000
-			       0x0 0x100a0000 0x0 0x1000>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
 			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
@@ -243,7 +245,7 @@ pwm0: pwm@10020000 {
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <42 43 44 45>;
+			interrupts = <42>, <43>, <44>, <45>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -252,7 +254,7 @@ pwm1: pwm@10021000 {
 			compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
-			interrupts = <46 47 48 49>;
+			interrupts = <46>, <47>, <48>, <49>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
@@ -265,7 +267,7 @@ l2cache: cache-controller@2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <1 2 3>;
+			interrupts = <1>, <2>, <3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {

arch/riscv/boot/dts/sifive/fu740-c000.dtsi

@@ -147,12 +147,12 @@ plic0: interrupt-controller@c000000 {
 			reg = <0x0 0xc000000 0x0 0x4000000>;
 			riscv,ndev = <69>;
 			interrupt-controller;
-			interrupts-extended = <
-				&cpu0_intc 0xffffffff
-				&cpu1_intc 0xffffffff &cpu1_intc 9
-				&cpu2_intc 0xffffffff &cpu2_intc 9
-				&cpu3_intc 0xffffffff &cpu3_intc 9
-				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+			interrupts-extended =
+				<&cpu0_intc 0xffffffff>,
+				<&cpu1_intc 0xffffffff>, <&cpu1_intc 9>,
+				<&cpu2_intc 0xffffffff>, <&cpu2_intc 9>,
+				<&cpu3_intc 0xffffffff>, <&cpu3_intc 9>,
+				<&cpu4_intc 0xffffffff>, <&cpu4_intc 9>;
 		};
 		prci: clock-controller@10000000 {
 			compatible = "sifive,fu740-c000-prci";
@@ -273,7 +273,7 @@ ccache: cache-controller@2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic0>;
-			interrupts = <19 21 22 20>;
+			interrupts = <19>, <21>, <22>, <20>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
 		gpio: gpio@10060000 {

arch/riscv/configs/defconfig

@@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -13,10 +14,10 @@ CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_BPF_SYSCALL=y
+# CONFIG_SYSFS_SYSCALL is not set
+CONFIG_SOC_MICROCHIP_POLARFIRE=y
 CONFIG_SOC_SIFIVE=y
 CONFIG_SOC_VIRT=y
-CONFIG_SOC_MICROCHIP_POLARFIRE=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_VIRTUALIZATION=y
@@ -70,14 +71,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
+# CONFIG_PTP_1588_CLOCK is not set
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SIFIVE=y
-# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_POWER_RESET=y
 CONFIG_DRM=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_VIRTIO_GPU=m
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -88,10 +89,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_UAS=y
+CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC=y
 CONFIG_MMC_SPI=y
 CONFIG_RTC_CLASS=y
 CONFIG_VIRTIO_PCI=y
@@ -142,5 +143,3 @@ CONFIG_RCU_EQS_DEBUG=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
-# CONFIG_SYSFS_SYSCALL is not set
-CONFIG_EFI=y

arch/riscv/configs/nommu_k210_defconfig

@@ -29,7 +29,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -75,7 +74,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set
-# CONFIG_SURFACE_PLATFORMS is not set
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set

arch/riscv/configs/nommu_k210_sdcard_defconfig

@@ -21,7 +21,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_MMU is not set
 CONFIG_SOC_CANAAN=y
-CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -30,7 +29,6 @@ CONFIG_CMDLINE_FORCE=y
 # CONFIG_SECCOMP is not set
 # CONFIG_STACKPROTECTOR is not set
 # CONFIG_GCC_PLUGINS is not set
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 CONFIG_BINFMT_FLAT=y
@@ -72,7 +70,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_VHOST_MENU is not set
-# CONFIG_SURFACE_PLATFORMS is not set
 CONFIG_EXT2_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set

arch/riscv/configs/nommu_virt_defconfig

@@ -32,7 +32,6 @@ CONFIG_SMP=y
 CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_JUMP_LABEL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MSDOS_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set

arch/riscv/configs/rv32_defconfig

@@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
@@ -13,7 +14,7 @@ CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_BPF_SYSCALL=y
+# CONFIG_SYSFS_SYSCALL is not set
 CONFIG_SOC_SIFIVE=y
 CONFIG_SOC_VIRT=y
 CONFIG_ARCH_RV32I=y
@@ -69,10 +70,10 @@ CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
 # CONFIG_PTP_1588_CLOCK is not set
-CONFIG_POWER_RESET=y
 CONFIG_DRM=y
 CONFIG_DRM_RADEON=y
 CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -132,4 +133,3 @@ CONFIG_RCU_EQS_DEBUG=y
 # CONFIG_FTRACE is not set
 # CONFIG_RUNTIME_TESTING_MENU is not set
 CONFIG_MEMTEST=y
-# CONFIG_SYSFS_SYSCALL is not set

arch/riscv/errata/alternative.c

@@ -22,7 +22,8 @@ static struct cpu_manufacturer_info_t {
 } cpu_mfr_info;
 
 static void (*vendor_patch_func)(struct alt_entry *begin, struct alt_entry *end,
-				 unsigned long archid, unsigned long impid);
+				 unsigned long archid,
+				 unsigned long impid) __initdata;
 
 static inline void __init riscv_fill_cpu_mfr_info(void)
 {

arch/riscv/include/asm/Kbuild

 # SPDX-License-Identifier: GPL-2.0
 generic-y += early_ioremap.h
-generic-y += extable.h
 generic-y += flat.h
 generic-y += kvm_para.h
 generic-y += user.h

arch/riscv/include/asm/asm-extable.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_ASM_EXTABLE_H
+#define __ASM_ASM_EXTABLE_H
+
+#define EX_TYPE_NONE			0
+#define EX_TYPE_FIXUP			1
+#define EX_TYPE_BPF			2
+#define EX_TYPE_UACCESS_ERR_ZERO	3
+
+#ifdef __ASSEMBLY__
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	.pushsection	__ex_table, "a";		\
+	.balign		4;				\
+	.long		((insn) - .);			\
+	.long		((fixup) - .);			\
+	.short		(type);				\
+	.short		(data);				\
+	.popsection;
+
+	.macro		_asm_extable, insn, fixup
+	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
+	.endm
+
+#else /* __ASSEMBLY__ */
+
+#include <linux/bits.h>
+#include <linux/stringify.h>
+#include <asm/gpr-num.h>
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	".pushsection	__ex_table, \"a\"\n"		\
+	".balign	4\n"				\
+	".long		((" insn ") - .)\n"		\
+	".long		((" fixup ") - .)\n"		\
+	".short		(" type ")\n"			\
+	".short		(" data ")\n"			\
+	".popsection\n"
+
+#define _ASM_EXTABLE(insn, fixup)	\
+	__ASM_EXTABLE_RAW(#insn, #fixup, __stringify(EX_TYPE_FIXUP), "0")
+
+#define EX_DATA_REG_ERR_SHIFT	0
+#define EX_DATA_REG_ERR		GENMASK(4, 0)
+#define EX_DATA_REG_ZERO_SHIFT	5
+#define EX_DATA_REG_ZERO	GENMASK(9, 5)
+
+#define EX_DATA_REG(reg, gpr)						\
+	"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
+
+#define _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)		\
+	__DEFINE_ASM_GPR_NUMS						\
+	__ASM_EXTABLE_RAW(#insn, #fixup, 				\
+			  __stringify(EX_TYPE_UACCESS_ERR_ZERO),	\
+			  "("						\
+			    EX_DATA_REG(ERR, err) " | "			\
+			    EX_DATA_REG(ZERO, zero)			\
+			  ")")
+
+#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ASM_EXTABLE_H */

arch/riscv/include/asm/extable.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_EXTABLE_H
+#define _ASM_RISCV_EXTABLE_H
+
+/*
+ * The exception table consists of pairs of relative offsets: the first
+ * is the relative offset to an instruction that is allowed to fault,
+ * and the second is the relative offset at which the program should
+ * continue. No registers are modified, so it is entirely up to the
+ * continuation code to figure out what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	int insn, fixup;
+	short type, data;
+};
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)		\
+do {							\
+	(a)->fixup = (b)->fixup + (delta);		\
+	(b)->fixup = (tmp).fixup - (delta);		\
+	(a)->type = (b)->type;				\
+	(b)->type = (tmp).type;				\
+	(a)->data = (b)->data;				\
+	(b)->data = (tmp).data;				\
+} while (0)
+
+bool fixup_exception(struct pt_regs *regs);
+
+#if defined(CONFIG_BPF_JIT) && defined(CONFIG_ARCH_RV64I)
+bool ex_handler_bpf(const struct exception_table_entry *ex, struct pt_regs *regs);
+#else
+static inline bool
+ex_handler_bpf(const struct exception_table_entry *ex,
+	       struct pt_regs *regs)
+{
+	return false;
+}
+#endif
+
+#endif

arch/riscv/include/asm/futex.h

@@ -11,6 +11,7 @@
 #include <linux/uaccess.h>
 #include <linux/errno.h>
 #include <asm/asm.h>
+#include <asm/asm-extable.h>
 
 /* We don't even really need the extable code, but for now keep it simple */
 #ifndef CONFIG_MMU
@@ -20,23 +21,14 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
 {								\
-	uintptr_t tmp;						\
 	__enable_user_access();					\
 	__asm__ __volatile__ (					\
 	"1:	" insn "				\n"	\
 	"2:						\n"	\
-	"	.section .fixup,\"ax\"			\n"	\
-	"	.balign 4				\n"	\
-	"3:	li %[r],%[e]				\n"	\
-	"	jump 2b,%[t]				\n"	\
-	"	.previous				\n"	\
-	"	.section __ex_table,\"a\"		\n"	\
-	"	.balign " RISCV_SZPTR "			\n"	\
-	"	" RISCV_PTR " 1b, 3b			\n"	\
-	"	.previous				\n"	\
+	_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %[r])			\
 	: [r] "+r" (ret), [ov] "=&r" (oldval),			\
-	  [u] "+m" (*uaddr), [t] "=&r" (tmp)			\
-	: [op] "Jr" (oparg), [e] "i" (-EFAULT)			\
+	  [u] "+m" (*uaddr)					\
+	: [op] "Jr" (oparg)					\
 	: "memory");						\
 	__disable_user_access();				\
 }
@@ -98,18 +90,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"2:	sc.w.aqrl %[t],%z[nv],%[u]		\n"
 	"	bnez %[t],1b				\n"
 	"3:						\n"
-	"	.section .fixup,\"ax\"			\n"
-	"	.balign 4				\n"
-	"4:	li %[r],%[e]				\n"
-	"	jump 3b,%[t]				\n"
-	"	.previous				\n"
-	"	.section __ex_table,\"a\"		\n"
-	"	.balign " RISCV_SZPTR "			\n"
-	"	" RISCV_PTR " 1b, 4b			\n"
-	"	" RISCV_PTR " 2b, 4b			\n"
-	"	.previous				\n"
+		_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %[r])	\
+		_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %[r])	\
 	: [r] "+r" (ret), [v] "=&r" (val), [u] "+m" (*uaddr), [t] "=&r" (tmp)
-	: [ov] "Jr" (oldval), [nv] "Jr" (newval), [e] "i" (-EFAULT)
+	: [ov] "Jr" (oldval), [nv] "Jr" (newval)
 	: "memory");
 	__disable_user_access();
 

arch/riscv/include/asm/gpr-num.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_GPR_NUM_H
+#define __ASM_GPR_NUM_H
+
+#ifdef __ASSEMBLY__
+	.equ	.L__gpr_num_zero,	0
+	.equ	.L__gpr_num_ra,		1
+	.equ	.L__gpr_num_sp,		2
+	.equ	.L__gpr_num_gp,		3
+	.equ	.L__gpr_num_tp,		4
+	.equ	.L__gpr_num_t0,		5
+	.equ	.L__gpr_num_t1,		6
+	.equ	.L__gpr_num_t2,		7
+	.equ	.L__gpr_num_s0,		8
+	.equ	.L__gpr_num_s1,		9
+	.equ	.L__gpr_num_a0,		10
+	.equ	.L__gpr_num_a1,		11
+	.equ	.L__gpr_num_a2,		12
+	.equ	.L__gpr_num_a3,		13
+	.equ	.L__gpr_num_a4,		14
+	.equ	.L__gpr_num_a5,		15
+	.equ	.L__gpr_num_a6,		16
+	.equ	.L__gpr_num_a7,		17
+	.equ	.L__gpr_num_s2,		18
+	.equ	.L__gpr_num_s3,		19
+	.equ	.L__gpr_num_s4,		20
+	.equ	.L__gpr_num_s5,		21
+	.equ	.L__gpr_num_s6,		22
+	.equ	.L__gpr_num_s7,		23
+	.equ	.L__gpr_num_s8,		24
+	.equ	.L__gpr_num_s9,		25
+	.equ	.L__gpr_num_s10,	26
+	.equ	.L__gpr_num_s11,	27
+	.equ	.L__gpr_num_t3,		28
+	.equ	.L__gpr_num_t4,		29
+	.equ	.L__gpr_num_t5,		30
+	.equ	.L__gpr_num_t6,		31
+
+#else /* __ASSEMBLY__ */
+
+#define __DEFINE_ASM_GPR_NUMS					\
+"	.equ	.L__gpr_num_zero,	0\n"			\
+"	.equ	.L__gpr_num_ra,		1\n"			\
+"	.equ	.L__gpr_num_sp,		2\n"			\
+"	.equ	.L__gpr_num_gp,		3\n"			\
+"	.equ	.L__gpr_num_tp,		4\n"			\
+"	.equ	.L__gpr_num_t0,		5\n"			\
+"	.equ	.L__gpr_num_t1,		6\n"			\
+"	.equ	.L__gpr_num_t2,		7\n"			\
+"	.equ	.L__gpr_num_s0,		8\n"			\
+"	.equ	.L__gpr_num_s1,		9\n"			\
+"	.equ	.L__gpr_num_a0,		10\n"			\
+"	.equ	.L__gpr_num_a1,		11\n"			\
+"	.equ	.L__gpr_num_a2,		12\n"			\
+"	.equ	.L__gpr_num_a3,		13\n"			\
+"	.equ	.L__gpr_num_a4,		14\n"			\
+"	.equ	.L__gpr_num_a5,		15\n"			\
+"	.equ	.L__gpr_num_a6,		16\n"			\
+"	.equ	.L__gpr_num_a7,		17\n"			\
+"	.equ	.L__gpr_num_s2,		18\n"			\
+"	.equ	.L__gpr_num_s3,		19\n"			\
+"	.equ	.L__gpr_num_s4,		20\n"			\
+"	.equ	.L__gpr_num_s5,		21\n"			\
+"	.equ	.L__gpr_num_s6,		22\n"			\
+"	.equ	.L__gpr_num_s7,		23\n"			\
+"	.equ	.L__gpr_num_s8,		24\n"			\
+"	.equ	.L__gpr_num_s9,		25\n"			\
+"	.equ	.L__gpr_num_s10,	26\n"			\
+"	.equ	.L__gpr_num_s11,	27\n"			\
+"	.equ	.L__gpr_num_t3,		28\n"			\
+"	.equ	.L__gpr_num_t4,		29\n"			\
+"	.equ	.L__gpr_num_t5,		30\n"			\
+"	.equ	.L__gpr_num_t6,		31\n"
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_GPR_NUM_H */

arch/riscv/include/asm/pgtable-bits.h

@@ -31,7 +31,7 @@
  * _PAGE_PROT_NONE is set on not-present pages (and ignored by the hardware) to
  * distinguish them from swapped out pages
  */
-#define _PAGE_PROT_NONE _PAGE_READ
+#define _PAGE_PROT_NONE _PAGE_GLOBAL
 
 #define _PAGE_PFN_SHIFT 10
 

arch/riscv/include/asm/pgtable.h

@@ -25,7 +25,7 @@
 #endif
 
 #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
-#define VMALLOC_END      (PAGE_OFFSET - 1)
+#define VMALLOC_END      PAGE_OFFSET
 #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)
 
 #define BPF_JIT_REGION_SIZE	(SZ_128M)
@@ -51,7 +51,7 @@
 #define VMEMMAP_SHIFT \
 	(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
 #define VMEMMAP_SIZE	BIT(VMEMMAP_SHIFT)
-#define VMEMMAP_END	(VMALLOC_START - 1)
+#define VMEMMAP_END	VMALLOC_START
 #define VMEMMAP_START	(VMALLOC_START - VMEMMAP_SIZE)
 
 /*
@@ -119,7 +119,7 @@
 /* Page protection bits */
 #define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER)
 
-#define PAGE_NONE		__pgprot(_PAGE_PROT_NONE)
+#define PAGE_NONE		__pgprot(_PAGE_PROT_NONE | _PAGE_READ)
 #define PAGE_READ		__pgprot(_PAGE_BASE | _PAGE_READ)
 #define PAGE_WRITE		__pgprot(_PAGE_BASE | _PAGE_READ | _PAGE_WRITE)
 #define PAGE_EXEC		__pgprot(_PAGE_BASE | _PAGE_EXEC)
@@ -628,11 +628,12 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
  *
  * Format of swap PTE:
  *	bit            0:	_PAGE_PRESENT (zero)
- *	bit            1:	_PAGE_PROT_NONE (zero)
- *	bits      2 to 6:	swap type
- *	bits 7 to XLEN-1:	swap offset
+ *	bit       1 to 3:       _PAGE_LEAF (zero)
+ *	bit            5:	_PAGE_PROT_NONE (zero)
+ *	bits      6 to 10:	swap type
+ *	bits 10 to XLEN-1:	swap offset
  */
-#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_SHIFT	6
 #define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1UL << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
@@ -648,6 +649,11 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
+#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
+#define __pmd_to_swp_entry(pmd) ((swp_entry_t) { pmd_val(pmd) })
+#define __swp_entry_to_pmd(swp) __pmd((swp).val)
+#endif /* CONFIG_ARCH_ENABLE_THP_MIGRATION */
+
 /*
  * In the RV64 Linux scheme, we give the user half of the virtual-address space
  * and give the kernel the other (upper) half.

arch/riscv/include/asm/sbi.h

@@ -27,6 +27,7 @@ enum sbi_ext_id {
 	SBI_EXT_IPI = 0x735049,
 	SBI_EXT_RFENCE = 0x52464E43,
 	SBI_EXT_HSM = 0x48534D,
+	SBI_EXT_SRST = 0x53525354,
 
 	/* Experimentals extensions must lie within this range */
 	SBI_EXT_EXPERIMENTAL_START = 0x08000000,
@@ -78,6 +79,21 @@ enum sbi_hsm_hart_status {
 	SBI_HSM_HART_STATUS_STOP_PENDING,
 };
 
+enum sbi_ext_srst_fid {
+	SBI_EXT_SRST_RESET = 0,
+};
+
+enum sbi_srst_reset_type {
+	SBI_SRST_RESET_TYPE_SHUTDOWN = 0,
+	SBI_SRST_RESET_TYPE_COLD_REBOOT,
+	SBI_SRST_RESET_TYPE_WARM_REBOOT,
+};
+
+enum sbi_srst_reset_reason {
+	SBI_SRST_RESET_REASON_NONE = 0,
+	SBI_SRST_RESET_REASON_SYS_FAILURE,
+};
+
 #define SBI_SPEC_VERSION_DEFAULT	0x1
 #define SBI_SPEC_VERSION_MAJOR_SHIFT	24
 #define SBI_SPEC_VERSION_MAJOR_MASK	0x7f
@@ -157,6 +173,14 @@ static inline unsigned long sbi_minor_version(void)
 	return sbi_spec_version & SBI_SPEC_VERSION_MINOR_MASK;
 }
 
+/* Make SBI version */
+static inline unsigned long sbi_mk_version(unsigned long major,
+					    unsigned long minor)
+{
+	return ((major & SBI_SPEC_VERSION_MAJOR_MASK) <<
+		SBI_SPEC_VERSION_MAJOR_SHIFT) | minor;
+}
+
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }

arch/riscv/include/asm/smp.h

@@ -43,7 +43,6 @@ void arch_send_call_function_ipi_mask(struct cpumask *mask);
 void arch_send_call_function_single_ipi(int cpu);
 
 int riscv_hartid_to_cpuid(int hartid);
-void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
 
 /* Set custom IPI operations */
 void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
@@ -63,8 +62,6 @@ asmlinkage void smp_callin(void);
 #if defined CONFIG_HOTPLUG_CPU
 int __cpu_disable(void);
 void __cpu_die(unsigned int cpu);
-void cpu_stop(void);
-#else
 #endif /* CONFIG_HOTPLUG_CPU */
 
 #else
@@ -85,13 +82,6 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
-static inline void riscv_cpuid_to_hartid_mask(const struct cpumask *in,
-					      struct cpumask *out)
-{
-	cpumask_clear(out);
-	cpumask_set_cpu(boot_cpu_hartid, out);
-}
-
 static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
 {
 }
@@ -102,6 +92,8 @@ static inline void riscv_clear_ipi(void)
 
 #endif /* CONFIG_SMP */
 
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out);
+
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
 bool cpu_has_hotplug(unsigned int cpu);
 #else

arch/riscv/include/asm/uaccess.h

@@ -8,6 +8,7 @@
 #ifndef _ASM_RISCV_UACCESS_H
 #define _ASM_RISCV_UACCESS_H
 
+#include <asm/asm-extable.h>
 #include <asm/pgtable.h>		/* for TASK_SIZE */
 
 /*
@@ -80,25 +81,14 @@ static inline int __access_ok(unsigned long addr, unsigned long size)
 
 #define __get_user_asm(insn, x, ptr, err)			\
 do {								\
-	uintptr_t __tmp;					\
 	__typeof__(x) __x;					\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
-		"	" insn " %1, %3\n"			\
+		"	" insn " %1, %2\n"			\
 		"2:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
-		"	.balign 4\n"				\
-		"3:\n"						\
-		"	li %0, %4\n"				\
-		"	li %1, 0\n"				\
-		"	jump 2b, %2\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 3b\n"			\
-		"	.previous"				\
-		: "+r" (err), "=&r" (__x), "=r" (__tmp)		\
-		: "m" (*(ptr)), "i" (-EFAULT));			\
+		_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %0, %1)	\
+		: "+r" (err), "=&r" (__x)			\
+		: "m" (*(ptr)));				\
 	(x) = __x;						\
 } while (0)
 
@@ -110,30 +100,18 @@ do {								\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
 	u32 __lo, __hi;						\
-	uintptr_t __tmp;					\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
-		"	lw %1, %4\n"				\
+		"	lw %1, %3\n"				\
 		"2:\n"						\
-		"	lw %2, %5\n"				\
+		"	lw %2, %4\n"				\
 		"3:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
-		"	.balign 4\n"				\
-		"4:\n"						\
-		"	li %0, %6\n"				\
-		"	li %1, 0\n"				\
-		"	li %2, 0\n"				\
-		"	jump 3b, %3\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 4b\n"			\
-		"	" RISCV_PTR " 2b, 4b\n"			\
-		"	.previous"				\
-		: "+r" (err), "=&r" (__lo), "=r" (__hi),	\
-			"=r" (__tmp)				\
-		: "m" (__ptr[__LSW]), "m" (__ptr[__MSW]),	\
-			"i" (-EFAULT));				\
+		_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 3b, %0, %1)	\
+		_ASM_EXTABLE_UACCESS_ERR_ZERO(2b, 3b, %0, %1)	\
+		: "+r" (err), "=&r" (__lo), "=r" (__hi)		\
+		: "m" (__ptr[__LSW]), "m" (__ptr[__MSW]));	\
+	if (err)						\
+		__hi = 0;					\
 	(x) = (__typeof__(x))((__typeof__((x)-(x)))(		\
 		(((u64)__hi << 32) | __lo)));			\
 } while (0)
@@ -221,24 +199,14 @@ do {								\
 
 #define __put_user_asm(insn, x, ptr, err)			\
 do {								\
-	uintptr_t __tmp;					\
 	__typeof__(*(ptr)) __x = x;				\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
-		"	" insn " %z3, %2\n"			\
+		"	" insn " %z2, %1\n"			\
 		"2:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
-		"	.balign 4\n"				\
-		"3:\n"						\
-		"	li %0, %4\n"				\
-		"	jump 2b, %1\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 3b\n"			\
-		"	.previous"				\
-		: "+r" (err), "=r" (__tmp), "=m" (*(ptr))	\
-		: "rJ" (__x), "i" (-EFAULT));			\
+		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %0)		\
+		: "+r" (err), "=m" (*(ptr))			\
+		: "rJ" (__x));					\
 } while (0)
 
 #ifdef CONFIG_64BIT
@@ -249,28 +217,18 @@ do {								\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
 	u64 __x = (__typeof__((x)-(x)))(x);			\
-	uintptr_t __tmp;					\
 	__asm__ __volatile__ (					\
 		"1:\n"						\
-		"	sw %z4, %2\n"				\
+		"	sw %z3, %1\n"				\
 		"2:\n"						\
-		"	sw %z5, %3\n"				\
+		"	sw %z4, %2\n"				\
 		"3:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
-		"	.balign 4\n"				\
-		"4:\n"						\
-		"	li %0, %6\n"				\
-		"	jump 3b, %1\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
-		"	.balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 4b\n"			\
-		"	" RISCV_PTR " 2b, 4b\n"			\
-		"	.previous"				\
-		: "+r" (err), "=r" (__tmp),			\
+		_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %0)		\
+		_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %0)		\
+		: "+r" (err),					\
 			"=m" (__ptr[__LSW]),			\
 			"=m" (__ptr[__MSW])			\
-		: "rJ" (__x), "rJ" (__x >> 32), "i" (-EFAULT));	\
+		: "rJ" (__x), "rJ" (__x >> 32));		\
 } while (0)
 #endif /* CONFIG_64BIT */
 
@@ -388,81 +346,6 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 		__clear_user(to, n) : n;
 }
 
-/*
- * Atomic compare-and-exchange, but with a fixup for userspace faults.  Faults
- * will set "err" to -EFAULT, while successful accesses return the previous
- * value.
- */
-#define __cmpxchg_user(ptr, old, new, err, size, lrb, scb)	\
-({								\
-	__typeof__(ptr) __ptr = (ptr);				\
-	__typeof__(*(ptr)) __old = (old);			\
-	__typeof__(*(ptr)) __new = (new);			\
-	__typeof__(*(ptr)) __ret;				\
-	__typeof__(err) __err = 0;				\
-	register unsigned int __rc;				\
-	__enable_user_access();					\
-	switch (size) {						\
-	case 4:							\
-		__asm__ __volatile__ (				\
-		"0:\n"						\
-		"	lr.w" #scb " %[ret], %[ptr]\n"		\
-		"	bne          %[ret], %z[old], 1f\n"	\
-		"	sc.w" #lrb " %[rc], %z[new], %[ptr]\n"	\
-		"	bnez         %[rc], 0b\n"		\
-		"1:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		".balign 4\n"					\
-		"2:\n"						\
-		"	li %[err], %[efault]\n"			\
-		"	jump 1b, %[rc]\n"			\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		".balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 2b\n"			\
-		".previous\n"					\
-			: [ret] "=&r" (__ret),			\
-			  [rc]  "=&r" (__rc),			\
-			  [ptr] "+A" (*__ptr),			\
-			  [err] "=&r" (__err)			\
-			: [old] "rJ" (__old),			\
-			  [new] "rJ" (__new),			\
-			  [efault] "i" (-EFAULT));		\
-		break;						\
-	case 8:							\
-		__asm__ __volatile__ (				\
-		"0:\n"						\
-		"	lr.d" #scb " %[ret], %[ptr]\n"		\
-		"	bne          %[ret], %z[old], 1f\n"	\
-		"	sc.d" #lrb " %[rc], %z[new], %[ptr]\n"	\
-		"	bnez         %[rc], 0b\n"		\
-		"1:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		".balign 4\n"					\
-		"2:\n"						\
-		"	li %[err], %[efault]\n"			\
-		"	jump 1b, %[rc]\n"			\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		".balign " RISCV_SZPTR "\n"			\
-		"	" RISCV_PTR " 1b, 2b\n"			\
-		".previous\n"					\
-			: [ret] "=&r" (__ret),			\
-			  [rc]  "=&r" (__rc),			\
-			  [ptr] "+A" (*__ptr),			\
-			  [err] "=&r" (__err)			\
-			: [old] "rJ" (__old),			\
-			  [new] "rJ" (__new),			\
-			  [efault] "i" (-EFAULT));		\
-		break;						\
-	default:						\
-		BUILD_BUG();					\
-	}							\
-	__disable_user_access();				\
-	(err) = __err;						\
-	__ret;							\
-})
-
 #define HAVE_GET_KERNEL_NOFAULT
 
 #define __get_kernel_nofault(dst, src, type, err_label)			\

arch/riscv/kernel/cpu-hotplug.c

@@ -14,12 +14,6 @@
 #include <asm/cpu_ops.h>
 #include <asm/sbi.h>
 
-void cpu_stop(void);
-void arch_cpu_idle_dead(void)
-{
-	cpu_stop();
-}
-
 bool cpu_has_hotplug(unsigned int cpu)
 {
 	if (cpu_ops[cpu]->cpu_stop)
@@ -75,7 +69,7 @@ void __cpu_die(unsigned int cpu)
 /*
  * Called from the idle thread for the CPU which has been shutdown.
  */
-void cpu_stop(void)
+void arch_cpu_idle_dead(void)
 {
 	idle_task_exit();
 

arch/riscv/kernel/head.S

@@ -135,7 +135,7 @@ relocate:
 	/*
 	 * Switch to kernel page tables.  A full fence is necessary in order to
 	 * avoid using the trampoline translations, which are only correct for
-	 * the first superpage.  Fetching the fence is guarnteed to work
+	 * the first superpage.  Fetching the fence is guaranteed to work
 	 * because that first superpage is translated the same way.
 	 */
 	csrw CSR_SATP, a2
@@ -177,8 +177,7 @@ secondary_start_sbi:
 	REG_L sp, (a4)
 	REG_L tp, (a5)
 
-	.global secondary_start_common
-secondary_start_common:
+.Lsecondary_start_common:
 
 #ifdef CONFIG_MMU
 	/* Enable virtual memory and relocate to virtual address */
@@ -365,7 +364,7 @@ clear_bss_done:
 	beqz tp, .Lwait_for_cpu_up
 	fence
 
-	tail secondary_start_common
+	tail .Lsecondary_start_common
 #endif
 
 END(_start_kernel)
@@ -448,7 +447,3 @@ ENTRY(reset_regs)
 	ret
 END(reset_regs)
 #endif /* CONFIG_RISCV_M_MODE */
-
-__PAGE_ALIGNED_BSS
-	/* Empty zero page */
-	.balign PAGE_SIZE

arch/riscv/kernel/kexec_relocate.S

@@ -159,25 +159,15 @@ SYM_CODE_START(riscv_kexec_norelocate)
 	 * s0: (const) Phys address to jump to
 	 * s1: (const) Phys address of the FDT image
 	 * s2: (const) The hartid of the current hart
-	 * s3: (const) kernel_map.va_pa_offset, used when switching MMU off
 	 */
 	mv	s0, a1
 	mv	s1, a2
 	mv	s2, a3
-	mv	s3, a4
 
 	/* Disable / cleanup interrupts */
 	csrw	CSR_SIE, zero
 	csrw	CSR_SIP, zero
 
-	/* Switch to physical addressing */
-	la	s4, 1f
-	sub	s4, s4, s3
-	csrw	CSR_STVEC, s4
-	csrw	CSR_SATP, zero
-
-.align 2
-1:
 	/* Pass the arguments to the next kernel  / Cleanup*/
 	mv	a0, s2
 	mv	a1, s1
@@ -214,7 +204,15 @@ SYM_CODE_START(riscv_kexec_norelocate)
 	csrw	CSR_SCAUSE, zero
 	csrw	CSR_SSCRATCH, zero
 
-	jalr	zero, a2, 0
+	/*
+	 * Switch to physical addressing
+	 * This will also trigger a jump to CSR_STVEC
+	 * which in this case is the address of the new
+	 * kernel.
+	 */
+	csrw	CSR_STVEC, a2
+	csrw	CSR_SATP, zero
+
 SYM_CODE_END(riscv_kexec_norelocate)
 
 .section ".rodata"

arch/riscv/kernel/machine_kexec.c

@@ -169,7 +169,8 @@ machine_kexec(struct kimage *image)
 	struct kimage_arch *internal = &image->arch;
 	unsigned long jump_addr = (unsigned long) image->start;
 	unsigned long first_ind_entry = (unsigned long) &image->head;
-	unsigned long this_hart_id = raw_smp_processor_id();
+	unsigned long this_cpu_id = smp_processor_id();
+	unsigned long this_hart_id = cpuid_to_hartid_map(this_cpu_id);
 	unsigned long fdt_addr = internal->fdt_addr;
 	void *control_code_buffer = page_address(image->control_code_page);
 	riscv_kexec_method kexec_method = NULL;

arch/riscv/kernel/sbi.c

@@ -7,6 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 #include <asm/sbi.h>
 #include <asm/smp.h>
 
@@ -501,6 +502,32 @@ int sbi_remote_hfence_vvma_asid(const unsigned long *hart_mask,
 }
 EXPORT_SYMBOL(sbi_remote_hfence_vvma_asid);
 
+static void sbi_srst_reset(unsigned long type, unsigned long reason)
+{
+	sbi_ecall(SBI_EXT_SRST, SBI_EXT_SRST_RESET, type, reason,
+		  0, 0, 0, 0);
+	pr_warn("%s: type=0x%lx reason=0x%lx failed\n",
+		__func__, type, reason);
+}
+
+static int sbi_srst_reboot(struct notifier_block *this,
+			   unsigned long mode, void *cmd)
+{
+	sbi_srst_reset((mode == REBOOT_WARM || mode == REBOOT_SOFT) ?
+		       SBI_SRST_RESET_TYPE_WARM_REBOOT :
+		       SBI_SRST_RESET_TYPE_COLD_REBOOT,
+		       SBI_SRST_RESET_REASON_NONE);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sbi_srst_reboot_nb;
+
+static void sbi_srst_power_off(void)
+{
+	sbi_srst_reset(SBI_SRST_RESET_TYPE_SHUTDOWN,
+		       SBI_SRST_RESET_REASON_NONE);
+}
+
 /**
  * sbi_probe_extension() - Check if an SBI extension ID is supported or not.
  * @extid: The extension ID to be probed.
@@ -608,6 +635,14 @@ void __init sbi_init(void)
 		} else {
 			__sbi_rfence	= __sbi_rfence_v01;
 		}
+		if ((sbi_spec_version >= sbi_mk_version(0, 3)) &&
+		    (sbi_probe_extension(SBI_EXT_SRST) > 0)) {
+			pr_info("SBI SRST extension detected\n");
+			pm_power_off = sbi_srst_power_off;
+			sbi_srst_reboot_nb.notifier_call = sbi_srst_reboot;
+			sbi_srst_reboot_nb.priority = 192;
+			register_restart_handler(&sbi_srst_reboot_nb);
+		}
 	} else {
 		__sbi_set_timer = __sbi_set_timer_v01;
 		__sbi_send_ipi	= __sbi_send_ipi_v01;

arch/riscv/kernel/setup.c

@@ -59,6 +59,16 @@ atomic_t hart_lottery __section(".sdata")
 unsigned long boot_cpu_hartid;
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
+{
+	int cpu;
+
+	cpumask_clear(out);
+	for_each_cpu(cpu, in)
+		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
+}
+EXPORT_SYMBOL_GPL(riscv_cpuid_to_hartid_mask);
+
 /*
  * Place kernel memory regions on the resource tree so that
  * kexec-tools can retrieve them from /proc/iomem. While there

arch/riscv/kernel/smp.c

@@ -59,16 +59,6 @@ int riscv_hartid_to_cpuid(int hartid)
 	return -ENOENT;
 }
 
-void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
-{
-	int cpu;
-
-	cpumask_clear(out);
-	for_each_cpu(cpu, in)
-		cpumask_set_cpu(cpuid_to_hartid_map(cpu), out);
-}
-EXPORT_SYMBOL_GPL(riscv_cpuid_to_hartid_mask);
-
 bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 {
 	return phys_id == cpuid_to_hartid_map(cpu);

arch/riscv/kernel/vmlinux-xip.lds.S

@@ -45,7 +45,6 @@ SECTIONS
 		ENTRY_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
-		*(.fixup)
 		_etext = .;
 	}
 	RO_DATA(L1_CACHE_BYTES)

arch/riscv/kernel/vmlinux.lds.S

@@ -4,7 +4,7 @@
  * Copyright (C) 2017 SiFive
  */
 
-#define RO_EXCEPTION_TABLE_ALIGN	16
+#define RO_EXCEPTION_TABLE_ALIGN	4
 
 #ifdef CONFIG_XIP_KERNEL
 #include "vmlinux-xip.lds.S"
@@ -48,7 +48,6 @@ SECTIONS
 		ENTRY_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
-		*(.fixup)
 		_etext = .;
 	}
 

arch/riscv/lib/uaccess.S

 #include <linux/linkage.h>
 #include <asm-generic/export.h>
 #include <asm/asm.h>
+#include <asm/asm-extable.h>
 #include <asm/csr.h>
 
 	.macro fixup op reg addr lbl
 100:
 	\op \reg, \addr
-	.section __ex_table,"a"
-	.balign RISCV_SZPTR
-	RISCV_PTR 100b, \lbl
-	.previous
+	_asm_extable	100b, \lbl
 	.endm
 
 ENTRY(__asm_copy_to_user)
@@ -173,6 +171,13 @@ ENTRY(__asm_copy_from_user)
 	csrc CSR_STATUS, t6
 	li	a0, 0
 	ret
+
+	/* Exception fixup code */
+10:
+	/* Disable access to user memory */
+	csrs CSR_STATUS, t6
+	mv a0, t5
+	ret
 ENDPROC(__asm_copy_to_user)
 ENDPROC(__asm_copy_from_user)
 EXPORT_SYMBOL(__asm_copy_to_user)
@@ -218,19 +223,12 @@ ENTRY(__clear_user)
 	addi a0, a0, 1
 	bltu a0, a3, 5b
 	j 3b
-ENDPROC(__clear_user)
-EXPORT_SYMBOL(__clear_user)
 
-	.section .fixup,"ax"
-	.balign 4
-	/* Fixup code for __copy_user(10) and __clear_user(11) */
-10:
-	/* Disable access to user memory */
-	csrs CSR_STATUS, t6
-	mv a0, t5
-	ret
+	/* Exception fixup code */
 11:
+	/* Disable access to user memory */
 	csrs CSR_STATUS, t6
 	mv a0, a1
 	ret
-	.previous
+ENDPROC(__clear_user)
+EXPORT_SYMBOL(__clear_user)

arch/riscv/mm/extable.c

@@ -7,27 +7,65 @@
  */
 
 
+#include <linux/bitfield.h>
 #include <linux/extable.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
+#include <asm/asm-extable.h>
+#include <asm/ptrace.h>
 
-#if defined(CONFIG_BPF_JIT) && defined(CONFIG_ARCH_RV64I)
-int rv_bpf_fixup_exception(const struct exception_table_entry *ex, struct pt_regs *regs);
-#endif
+static inline unsigned long
+get_ex_fixup(const struct exception_table_entry *ex)
+{
+	return ((unsigned long)&ex->fixup + ex->fixup);
+}
+
+static bool ex_handler_fixup(const struct exception_table_entry *ex,
+			     struct pt_regs *regs)
+{
+	regs->epc = get_ex_fixup(ex);
+	return true;
+}
+
+static inline void regs_set_gpr(struct pt_regs *regs, unsigned int offset,
+				unsigned long val)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return;
+
+	if (!offset)
+		*(unsigned long *)((unsigned long)regs + offset) = val;
+}
+
+static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
+					struct pt_regs *regs)
+{
+	int reg_err = FIELD_GET(EX_DATA_REG_ERR, ex->data);
+	int reg_zero = FIELD_GET(EX_DATA_REG_ZERO, ex->data);
+
+	regs_set_gpr(regs, reg_err, -EFAULT);
+	regs_set_gpr(regs, reg_zero, 0);
+
+	regs->epc = get_ex_fixup(ex);
+	return true;
+}
 
-int fixup_exception(struct pt_regs *regs)
+bool fixup_exception(struct pt_regs *regs)
 {
-	const struct exception_table_entry *fixup;
+	const struct exception_table_entry *ex;
 
-	fixup = search_exception_tables(regs->epc);
-	if (!fixup)
-		return 0;
+	ex = search_exception_tables(regs->epc);
+	if (!ex)
+		return false;
 
-#if defined(CONFIG_BPF_JIT) && defined(CONFIG_ARCH_RV64I)
-	if (regs->epc >= BPF_JIT_REGION_START && regs->epc < BPF_JIT_REGION_END)
-		return rv_bpf_fixup_exception(fixup, regs);
-#endif
+	switch (ex->type) {
+	case EX_TYPE_FIXUP:
+		return ex_handler_fixup(ex, regs);
+	case EX_TYPE_BPF:
+		return ex_handler_bpf(ex, regs);
+	case EX_TYPE_UACCESS_ERR_ZERO:
+		return ex_handler_uaccess_err_zero(ex, regs);
+	}
 
-	regs->epc = fixup->fixup;
-	return 1;
+	BUG();
 }

arch/riscv/mm/fault.c

@@ -235,7 +235,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (unlikely((addr >= VMALLOC_START) && (addr <= VMALLOC_END))) {
+	if (unlikely((addr >= VMALLOC_START) && (addr < VMALLOC_END))) {
 		vmalloc_fault(regs, code, addr);
 		return;
 	}

arch/riscv/mm/init.c

@@ -187,10 +187,10 @@ static void __init setup_bootmem(void)
 
 
 	phys_ram_end = memblock_end_of_DRAM();
-#ifndef CONFIG_64BIT
 #ifndef CONFIG_XIP_KERNEL
 	phys_ram_base = memblock_start_of_DRAM();
 #endif
+#ifndef CONFIG_64BIT
 	/*
 	 * memblock allocator is not aware of the fact that last 4K bytes of
 	 * the addressable memory can not be mapped because of IS_ERR_VALUE
@@ -367,7 +367,8 @@ static phys_addr_t __init alloc_pmd_late(uintptr_t va)
 	unsigned long vaddr;
 
 	vaddr = __get_free_page(GFP_KERNEL);
-	BUG_ON(!vaddr);
+	BUG_ON(!vaddr || !pgtable_pmd_page_ctor(virt_to_page(vaddr)));
+
 	return __pa(vaddr);
 }
 
@@ -812,13 +813,22 @@ static void __init reserve_crashkernel(void)
 	/*
 	 * Current riscv boot protocol requires 2MB alignment for
 	 * RV64 and 4MB alignment for RV32 (hugepage size)
+	 *
+	 * Try to alloc from 32bit addressible physical memory so that
+	 * swiotlb can work on the crash kernel.
 	 */
 	crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
-					       search_start, search_end);
+					       search_start,
+					       min(search_end, (unsigned long) SZ_4G));
 	if (crash_base == 0) {
-		pr_warn("crashkernel: couldn't allocate %lldKB\n",
-			crash_size >> 10);
-		return;
+		/* Try again without restricting region to 32bit addressible memory */
+		crash_base = memblock_phys_alloc_range(crash_size, PMD_SIZE,
+						search_start, search_end);
+		if (crash_base == 0) {
+			pr_warn("crashkernel: couldn't allocate %lldKB\n",
+				crash_size >> 10);
+			return;
+		}
 	}
 
 	pr_info("crashkernel: reserved 0x%016llx - 0x%016llx (%lld MB)\n",

arch/riscv/net/bpf_jit_comp64.c

@@ -458,10 +458,8 @@ static int emit_call(bool fixed, u64 addr, struct rv_jit_context *ctx)
 #define BPF_FIXUP_OFFSET_MASK   GENMASK(26, 0)
 #define BPF_FIXUP_REG_MASK      GENMASK(31, 27)
 
-int rv_bpf_fixup_exception(const struct exception_table_entry *ex,
-				struct pt_regs *regs);
-int rv_bpf_fixup_exception(const struct exception_table_entry *ex,
-				struct pt_regs *regs)
+bool ex_handler_bpf(const struct exception_table_entry *ex,
+		    struct pt_regs *regs)
 {
 	off_t offset = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
 	int regs_offset = FIELD_GET(BPF_FIXUP_REG_MASK, ex->fixup);
@@ -469,7 +467,7 @@ int rv_bpf_fixup_exception(const struct exception_table_entry *ex,
 	*(unsigned long *)((void *)regs + pt_regmap[regs_offset]) = 0;
 	regs->epc = (unsigned long)&ex->fixup - offset;
 
-	return 1;
+	return true;
 }
 
 /* For accesses to BTF pointers, add an entry to the exception table */
@@ -515,6 +513,7 @@ static int add_exception_handler(const struct bpf_insn *insn,
 
 	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, offset) |
 		FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+	ex->type = EX_TYPE_BPF;
 
 	ctx->nexentries++;
 	return 0;

scripts/mod/modpost.c

@@ -1830,6 +1830,14 @@ static int addend_mips_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
 	return 0;
 }
 
+#ifndef EM_RISCV
+#define EM_RISCV		243
+#endif
+
+#ifndef R_RISCV_SUB32
+#define R_RISCV_SUB32		39
+#endif
+
 static void section_rela(const char *modname, struct elf_info *elf,
 			 Elf_Shdr *sechdr)
 {
@@ -1866,6 +1874,13 @@ static void section_rela(const char *modname, struct elf_info *elf,
 		r_sym = ELF_R_SYM(r.r_info);
 #endif
 		r.r_addend = TO_NATIVE(rela->r_addend);
+		switch (elf->hdr->e_machine) {
+		case EM_RISCV:
+			if (!strcmp("__ex_table", fromsec) &&
+			    ELF_R_TYPE(r.r_info) == R_RISCV_SUB32)
+				continue;
+			break;
+		}
 		sym = elf->symtab_start + r_sym;
 		/* Skip special sections */
 		if (is_shndx_special(sym->st_shndx))

scripts/sorttable.c

@@ -233,7 +233,7 @@ static void sort_relative_table(char *extab_image, int image_size)
 	}
 }
 
-static void arm64_sort_relative_table(char *extab_image, int image_size)
+static void sort_relative_table_with_data(char *extab_image, int image_size)
 {
 	int i = 0;
 
@@ -261,34 +261,6 @@ static void arm64_sort_relative_table(char *extab_image, int image_size)
 	}
 }
 
-static void x86_sort_relative_table(char *extab_image, int image_size)
-{
-	int i = 0;
-
-	while (i < image_size) {
-		uint32_t *loc = (uint32_t *)(extab_image + i);
-
-		w(r(loc) + i, loc);
-		w(r(loc + 1) + i + 4, loc + 1);
-		/* Don't touch the fixup type */
-
-		i += sizeof(uint32_t) * 3;
-	}
-
-	qsort(extab_image, image_size / 12, 12, compare_relative_table);
-
-	i = 0;
-	while (i < image_size) {
-		uint32_t *loc = (uint32_t *)(extab_image + i);
-
-		w(r(loc) - i, loc);
-		w(r(loc + 1) - (i + 4), loc + 1);
-		/* Don't touch the fixup type */
-
-		i += sizeof(uint32_t) * 3;
-	}
-}
-
 static void s390_sort_relative_table(char *extab_image, int image_size)
 {
 	int i;
@@ -366,15 +338,14 @@ static int do_file(char const *const fname, void *addr)
 
 	switch (r2(&ehdr->e_machine)) {
 	case EM_386:
+	case EM_AARCH64:
+	case EM_RISCV:
 	case EM_X86_64:
-		custom_sort = x86_sort_relative_table;
+		custom_sort = sort_relative_table_with_data;
 		break;
 	case EM_S390:
 		custom_sort = s390_sort_relative_table;
 		break;
-	case EM_AARCH64:
-		custom_sort = arm64_sort_relative_table;
-		break;
 	case EM_PARISC:
 	case EM_PPC:
 	case EM_PPC64:
@@ -385,7 +356,6 @@ static int do_file(char const *const fname, void *addr)
 	case EM_ARM:
 	case EM_MICROBLAZE:
 	case EM_MIPS:
-	case EM_RISCV:
 	case EM_XTENSA:
 		break;
 	default: