[PATCH] chelsio: add support for other 10G boards

Add support for other versions of the 10G Chelsio boards.
This is basically a port of the vendor driver with the
TOE features removed.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/Kconfig

@@ -2361,9 +2361,9 @@ config CHELSIO_T1
         tristate "Chelsio 10Gb Ethernet support"
         depends on PCI
         help
-          This driver supports Chelsio N110 and N210 models 10Gb Ethernet
-          cards. More information about adapter features and performance
-          tuning is in <file:Documentation/networking/cxgb.txt>.
+          This driver supports Chelsio gigabit and 10-gigabit
+          Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
 
           For general information about Chelsio and our products, visit
           our website at <http://www.chelsio.com>.

drivers/net/chelsio/Makefile

 #
-# Chelsio 10Gb NIC driver for Linux.
+# Chelsio T1 driver
 #
 
 obj-$(CONFIG_CHELSIO_T1) += cxgb.o
 
-EXTRA_CFLAGS += -Idrivers/net/chelsio $(DEBUG_FLAGS)
+cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o \
+	     mv88x201x.o my3126.o $(cxgb-y)
 
 
-cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
-

drivers/net/chelsio/common.h

@@ -45,6 +45,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/ethtool.h>
+#include <linux/if_vlan.h>
 #include <linux/mii.h>
 #include <linux/crc32.h>
 #include <linux/init.h>
@@ -53,13 +54,30 @@
 
 #define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
 #define DRV_NAME "cxgb"
-#define DRV_VERSION "2.1.1"
+#define DRV_VERSION "2.2"
 #define PFX      DRV_NAME ": "
 
 #define CH_ERR(fmt, ...)   printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
 #define CH_WARN(fmt, ...)  printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
 #define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
 
+/*
+ * More powerful macro that selectively prints messages based on msg_enable.
+ * For info and debugging messages.
+ */
+#define CH_MSG(adapter, level, category, fmt, ...) do { \
+	if ((adapter)->msg_enable & NETIF_MSG_##category) \
+		printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \
+		       ## __VA_ARGS__); \
+} while (0)
+
+#ifdef DEBUG
+# define CH_DBG(adapter, category, fmt, ...) \
+	CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__)
+#else
+# define CH_DBG(fmt, ...)
+#endif
+
 #define CH_DEVICE(devid, ssid, idx) \
 	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
 
@@ -71,10 +89,6 @@
 
 typedef struct adapter adapter_t;
 
-void t1_elmer0_ext_intr(adapter_t *adapter);
-void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
-			int speed, int duplex, int fc);
-
 struct t1_rx_mode {
 	struct net_device *dev;
 	u32 idx;
@@ -97,26 +111,53 @@ static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
 }
 
 #define	MAX_NPORTS 4
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+#define NMTUS      8
+#define TCB_SIZE   128
 
 #define SPEED_INVALID 0xffff
 #define DUPLEX_INVALID 0xff
 
 enum {
 	CHBT_BOARD_N110,
-	CHBT_BOARD_N210
+	CHBT_BOARD_N210,
+	CHBT_BOARD_7500,
+	CHBT_BOARD_8000,
+	CHBT_BOARD_CHT101,
+	CHBT_BOARD_CHT110,
+	CHBT_BOARD_CHT210,
+	CHBT_BOARD_CHT204,
+	CHBT_BOARD_CHT204V,
+	CHBT_BOARD_CHT204E,
+	CHBT_BOARD_CHN204,
+	CHBT_BOARD_COUGAR,
+	CHBT_BOARD_6800,
+	CHBT_BOARD_SIMUL,
 };
 
 enum {
+	CHBT_TERM_FPGA,
 	CHBT_TERM_T1,
-	CHBT_TERM_T2
+	CHBT_TERM_T2,
+	CHBT_TERM_T3
 };
 
 enum {
+	CHBT_MAC_CHELSIO_A,
+	CHBT_MAC_IXF1010,
 	CHBT_MAC_PM3393,
+	CHBT_MAC_VSC7321,
+	CHBT_MAC_DUMMY
 };
 
 enum {
+	CHBT_PHY_88E1041,
+	CHBT_PHY_88E1111,
 	CHBT_PHY_88X2010,
+	CHBT_PHY_XPAK,
+	CHBT_PHY_MY3126,
+	CHBT_PHY_8244,
+	CHBT_PHY_DUMMY
 };
 
 enum {
@@ -150,16 +191,43 @@ struct chelsio_pci_params {
 	unsigned char  is_pcix;
 };
 
+struct tp_params {
+	unsigned int pm_size;
+	unsigned int cm_size;
+	unsigned int pm_rx_base;
+	unsigned int pm_tx_base;
+	unsigned int pm_rx_pg_size;
+	unsigned int pm_tx_pg_size;
+	unsigned int pm_rx_num_pgs;
+	unsigned int pm_tx_num_pgs;
+	unsigned int rx_coalescing_size;
+	unsigned int use_5tuple_mode;
+};
+
+struct mc5_params {
+	unsigned int mode;       /* selects MC5 width */
+	unsigned int nservers;   /* size of server region */
+	unsigned int nroutes;    /* size of routing region */
+};
+
+/* Default MC5 region sizes */
+#define DEFAULT_SERVER_REGION_LEN 256
+#define DEFAULT_RT_REGION_LEN 1024
+
 struct adapter_params {
 	struct sge_params sge;
+	struct mc5_params mc5;
+	struct tp_params  tp;
 	struct chelsio_pci_params pci;
 
 	const struct board_info *brd_info;
 
+	unsigned short mtus[NMTUS];
 	unsigned int   nports;          /* # of ethernet ports */
 	unsigned int   stats_update_period;
 	unsigned short chip_revision;
 	unsigned char  chip_version;
+	unsigned char  is_asic;
 };
 
 struct link_config {
@@ -207,6 +275,7 @@ struct adapter {
 	/* Terminator modules. */
 	struct sge    *sge;
 	struct peespi *espi;
+	struct petp   *tp;
 
 	struct port_info port[MAX_NPORTS];
 	struct work_struct stats_update_task;
@@ -217,6 +286,7 @@ struct adapter {
 	/* guards async operations */
 	spinlock_t async_lock ____cacheline_aligned;
 	u32 slow_intr_mask;
+	int t1powersave;
 };
 
 enum {                                           /* adapter flags */
@@ -255,6 +325,11 @@ struct board_info {
 	const char             *desc;
 };
 
+static inline int t1_is_asic(const adapter_t *adapter)
+{
+	return adapter->params.is_asic;
+}
+
 extern struct pci_device_id t1_pci_tbl[];
 
 static inline int adapter_matches_type(const adapter_t *adapter,
@@ -284,13 +359,15 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap)
 	return board_info(adap)->clock_core / 1000000;
 }
 
+extern int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp);
+extern int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
 extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
 extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
 
 extern void t1_interrupts_enable(adapter_t *adapter);
 extern void t1_interrupts_disable(adapter_t *adapter);
 extern void t1_interrupts_clear(adapter_t *adapter);
-extern int elmer0_ext_intr_handler(adapter_t *adapter);
+extern int t1_elmer0_ext_intr_handler(adapter_t *adapter);
 extern int t1_slow_intr_handler(adapter_t *adapter);
 
 extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
@@ -304,9 +381,7 @@ extern int t1_init_hw_modules(adapter_t *adapter);
 extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
 extern void t1_free_sw_modules(adapter_t *adapter);
 extern void t1_fatal_err(adapter_t *adapter);
-
-extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable);
-extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable);
-extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable);
-
+extern void t1_link_changed(adapter_t *adapter, int port_id);
+extern void t1_link_negotiated(adapter_t *adapter, int port_id, int link_stat,
+			    int speed, int duplex, int pause);
 #endif /* _CXGB_COMMON_H_ */

drivers/net/chelsio/cphy.h

@@ -52,7 +52,14 @@ struct mdio_ops {
 /* PHY interrupt types */
 enum {
 	cphy_cause_link_change = 0x1,
-	cphy_cause_error = 0x2
+	cphy_cause_error = 0x2,
+	cphy_cause_fifo_error = 0x3
+};
+
+enum {
+	PHY_LINK_UP = 0x1,
+	PHY_AUTONEG_RDY = 0x2,
+	PHY_AUTONEG_EN = 0x4
 };
 
 struct cphy;
@@ -81,7 +88,18 @@ struct cphy_ops {
 /* A PHY instance */
 struct cphy {
 	int addr;                            /* PHY address */
+	int state;	/* Link status state machine */
 	adapter_t *adapter;                  /* associated adapter */
+
+	struct work_struct phy_update;
+
+	u16 bmsr;
+	int count;
+	int act_count;
+	int act_on;
+
+	u32 elmer_gpo;
+
 	struct cphy_ops *ops;                /* PHY operations */
 	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
 			 int reg_addr, unsigned int *val);
@@ -142,6 +160,10 @@ struct gphy {
 	int (*reset)(adapter_t *adapter);
 };
 
+extern struct gphy t1_my3126_ops;
+extern struct gphy t1_mv88e1xxx_ops;
+extern struct gphy t1_vsc8244_ops;
+extern struct gphy t1_xpak_ops;
 extern struct gphy t1_mv88x201x_ops;
 extern struct gphy t1_dummy_phy_ops;
 

drivers/net/chelsio/cpl5_cmd.h

@@ -46,24 +46,385 @@
 #endif
 
 enum CPL_opcode {
+	CPL_PASS_OPEN_REQ     = 0x1,
+	CPL_PASS_OPEN_RPL     = 0x2,
+	CPL_PASS_ESTABLISH    = 0x3,
+	CPL_PASS_ACCEPT_REQ   = 0xE,
+	CPL_PASS_ACCEPT_RPL   = 0x4,
+	CPL_ACT_OPEN_REQ      = 0x5,
+	CPL_ACT_OPEN_RPL      = 0x6,
+	CPL_CLOSE_CON_REQ     = 0x7,
+	CPL_CLOSE_CON_RPL     = 0x8,
+	CPL_CLOSE_LISTSRV_REQ = 0x9,
+	CPL_CLOSE_LISTSRV_RPL = 0xA,
+	CPL_ABORT_REQ         = 0xB,
+	CPL_ABORT_RPL         = 0xC,
+	CPL_PEER_CLOSE        = 0xD,
+	CPL_ACT_ESTABLISH     = 0x17,
+
+	CPL_GET_TCB           = 0x24,
+	CPL_GET_TCB_RPL       = 0x25,
+	CPL_SET_TCB           = 0x26,
+	CPL_SET_TCB_FIELD     = 0x27,
+	CPL_SET_TCB_RPL       = 0x28,
+	CPL_PCMD              = 0x29,
+
+	CPL_PCMD_READ         = 0x31,
+	CPL_PCMD_READ_RPL     = 0x32,
+
+
+	CPL_RX_DATA           = 0xA0,
+	CPL_RX_DATA_DDP       = 0xA1,
+	CPL_RX_DATA_ACK       = 0xA3,
 	CPL_RX_PKT            = 0xAD,
+	CPL_RX_ISCSI_HDR      = 0xAF,
+	CPL_TX_DATA_ACK       = 0xB0,
+	CPL_TX_DATA           = 0xB1,
 	CPL_TX_PKT            = 0xB2,
 	CPL_TX_PKT_LSO        = 0xB6,
+
+	CPL_RTE_DELETE_REQ    = 0xC0,
+	CPL_RTE_DELETE_RPL    = 0xC1,
+	CPL_RTE_WRITE_REQ     = 0xC2,
+	CPL_RTE_WRITE_RPL     = 0xD3,
+	CPL_RTE_READ_REQ      = 0xC3,
+	CPL_RTE_READ_RPL      = 0xC4,
+	CPL_L2T_WRITE_REQ     = 0xC5,
+	CPL_L2T_WRITE_RPL     = 0xD4,
+	CPL_L2T_READ_REQ      = 0xC6,
+	CPL_L2T_READ_RPL      = 0xC7,
+	CPL_SMT_WRITE_REQ     = 0xC8,
+	CPL_SMT_WRITE_RPL     = 0xD5,
+	CPL_SMT_READ_REQ      = 0xC9,
+	CPL_SMT_READ_RPL      = 0xCA,
+	CPL_ARP_MISS_REQ      = 0xCD,
+	CPL_ARP_MISS_RPL      = 0xCE,
+	CPL_MIGRATE_C2T_REQ   = 0xDC,
+	CPL_MIGRATE_C2T_RPL   = 0xDD,
+	CPL_ERROR             = 0xD7,
+
+    /* internal: driver -> TOM */
+	CPL_MSS_CHANGE        = 0xE1
+};
+
+#define NUM_CPL_CMDS 256
+
+enum CPL_error {
+	CPL_ERR_NONE               = 0,
+	CPL_ERR_TCAM_PARITY        = 1,
+	CPL_ERR_TCAM_FULL          = 3,
+	CPL_ERR_CONN_RESET         = 20,
+	CPL_ERR_CONN_EXIST         = 22,
+	CPL_ERR_ARP_MISS           = 23,
+	CPL_ERR_BAD_SYN            = 24,
+	CPL_ERR_CONN_TIMEDOUT      = 30,
+	CPL_ERR_XMIT_TIMEDOUT      = 31,
+	CPL_ERR_PERSIST_TIMEDOUT   = 32,
+	CPL_ERR_FINWAIT2_TIMEDOUT  = 33,
+	CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
+	CPL_ERR_ABORT_FAILED       = 42,
+	CPL_ERR_GENERAL            = 99
+};
+
+enum {
+	CPL_CONN_POLICY_AUTO = 0,
+	CPL_CONN_POLICY_ASK  = 1,
+	CPL_CONN_POLICY_DENY = 3
 };
 
-enum {                /* TX_PKT_LSO ethernet types */
+enum {
+	ULP_MODE_NONE   = 0,
+	ULP_MODE_TCPDDP = 1,
+	ULP_MODE_ISCSI  = 2,
+	ULP_MODE_IWARP  = 3,
+	ULP_MODE_SSL    = 4
+};
+
+enum {
+	CPL_PASS_OPEN_ACCEPT,
+	CPL_PASS_OPEN_REJECT
+};
+
+enum {
+	CPL_ABORT_SEND_RST = 0,
+	CPL_ABORT_NO_RST,
+	CPL_ABORT_POST_CLOSE_REQ = 2
+};
+
+enum {                // TX_PKT_LSO ethernet types
 	CPL_ETH_II,
 	CPL_ETH_II_VLAN,
 	CPL_ETH_802_3,
 	CPL_ETH_802_3_VLAN
 };
 
-struct cpl_rx_data {
+union opcode_tid {
+    u32 opcode_tid;
+    u8 opcode;
+};
+
+#define S_OPCODE 24
+#define V_OPCODE(x) ((x) << S_OPCODE)
+#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF)
+#define G_TID(x)    ((x) & 0xFFFFFF)
+
+/* tid is assumed to be 24-bits */
+#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid))
+
+#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid)
+
+/* extract the TID from a CPL command */
+#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd))))
+
+struct tcp_options {
+	u16 mss;
+	u8 wsf;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd:4;
+	u8 ecn:1;
+	u8 sack:1;
+	u8 tstamp:1;
+#else
+	u8 tstamp:1;
+	u8 sack:1;
+	u8 ecn:1;
+	u8 rsvd:4;
+#endif
+};
+
+struct cpl_pass_open_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 opt0h;
+	u32 opt0l;
+	u32 peer_netmask;
+	u32 opt1;
+};
+
+struct cpl_pass_open_rpl {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u8 resvd[7];
+	u8 status;
+};
+
+struct cpl_pass_establish {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+	u8  l2t_idx;
+	u8  rsvd[3];
+	u32 snd_isn;
+	u32 rcv_isn;
+};
+
+struct cpl_pass_accept_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+    struct tcp_options tcp_options;
+	u8  dst_mac[6];
+	u16 vlan_tag;
+	u8  src_mac[6];
+	u8  rsvd[2];
+	u32 rcv_isn;
+	u32 unknown_tcp_options;
+};
+
+struct cpl_pass_accept_rpl {
+	union opcode_tid ot;
+	u32 rsvd0;
+	u32 rsvd1;
+	u32 peer_ip;
+	u32 opt0h;
+	union {
+	u32 opt0l;
+	struct {
+	    u8 rsvd[3];
+	    u8 status;
+	};
+    };
+};
+
+struct cpl_act_open_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 opt0h;
+	u32 opt0l;
+	u32 iff_vlantag;
+	u32 rsvd;
+};
+
+struct cpl_act_open_rpl {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 new_tid;
+	u8  rsvd[3];
+	u8  status;
+};
+
+struct cpl_act_establish {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+	u32 rsvd;
+	u32 snd_isn;
+	u32 rcv_isn;
+};
+
+struct cpl_get_tcb {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_get_tcb_rpl {
+	union opcode_tid ot;
+	u16 len;
+	u8 rsvd;
+	u8 status;
+};
+
+struct cpl_set_tcb {
+	union opcode_tid ot;
+	u16 len;
+	u16 rsvd;
+};
+
+struct cpl_set_tcb_field {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 offset;
+	u32 mask;
+	u32 val;
+};
+
+struct cpl_set_tcb_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+};
+
+struct cpl_pcmd {
+	union opcode_tid ot;
+	u16 dlen_in;
+	u16 dlen_out;
+	u32 pcmd_parm[2];
+};
+
+struct cpl_pcmd_read {
+	union opcode_tid ot;
+	u32 rsvd1;
+	u16 rsvd2;
+	u32 addr;
+	u16 len;
+};
+
+struct cpl_pcmd_read_rpl {
+	union opcode_tid ot;
+	u16 len;
+};
+
+struct cpl_close_con_req {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_close_con_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+	u32 snd_nxt;
+	u32 rcv_nxt;
+};
+
+struct cpl_close_listserv_req {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_close_listserv_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+};
+
+struct cpl_abort_req {
+	union opcode_tid ot;
 	u32 rsvd0;
+	u8  rsvd1;
+	u8  cmd;
+	u8  rsvd2[6];
+};
+
+struct cpl_abort_rpl {
+	union opcode_tid ot;
+	u32 rsvd0;
+	u8  rsvd1;
+	u8  status;
+	u8  rsvd2[6];
+};
+
+struct cpl_peer_close {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_tx_data {
+	union opcode_tid ot;
+	u32 len;
+	u32 rsvd0;
+	u16 urg;
+	u16 flags;
+};
+
+struct cpl_tx_data_ack {
+	union opcode_tid ot;
+	u32 ack_seq;
+};
+
+struct cpl_rx_data {
+	union opcode_tid ot;
 	u32 len;
 	u32 seq;
 	u16 urg;
-	u8  rsvd1;
+	u8  rsvd;
+	u8  status;
+};
+
+struct cpl_rx_data_ack {
+	union opcode_tid ot;
+	u32 credit;
+};
+
+struct cpl_rx_data_ddp {
+	union opcode_tid ot;
+	u32 len;
+	u32 seq;
+	u32 nxt_seq;
+	u32 ulp_crc;
+	u16 ddp_status;
+	u8  rsvd;
 	u8  status;
 };
 
@@ -99,9 +460,9 @@ struct cpl_tx_pkt_lso {
 	u8 ip_csum_dis:1;
 	u8 l4_csum_dis:1;
 	u8 vlan_valid:1;
-	u8 rsvd:1;
+	u8 :1;
 #else
-	u8 rsvd:1;
+	u8 :1;
 	u8 vlan_valid:1;
 	u8 l4_csum_dis:1;
 	u8 ip_csum_dis:1;
@@ -110,8 +471,7 @@ struct cpl_tx_pkt_lso {
 	u16 vlan;
 	__be32 len;
 
-	u32 rsvd2;
-	u8 rsvd3;
+	u8 rsvd[5];
 #if defined(__LITTLE_ENDIAN_BITFIELD)
 	u8 tcp_hdr_words:4;
 	u8 ip_hdr_words:4;
@@ -138,8 +498,142 @@ struct cpl_rx_pkt {
 	u8 iff:4;
 #endif
 	u16 csum;
-	__be16 vlan;
+	u16 vlan;
 	u16 len;
 };
 
+struct cpl_l2t_write_req {
+	union opcode_tid ot;
+	u32 params;
+	u8 rsvd1[2];
+	u8 dst_mac[6];
+};
+
+struct cpl_l2t_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_l2t_read_req {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 l2t_idx;
+};
+
+struct cpl_l2t_read_rpl {
+	union opcode_tid ot;
+	u32 params;
+	u8 rsvd1[2];
+	u8 dst_mac[6];
+};
+
+struct cpl_smt_write_req {
+	union opcode_tid ot;
+	u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:1;
+	u8 mtu_idx:3;
+	u8 iff:4;
+#else
+	u8 iff:4;
+	u8 mtu_idx:3;
+	u8 rsvd1:1;
+#endif
+	u16 rsvd2;
+	u16 rsvd3;
+	u8  src_mac1[6];
+	u16 rsvd4;
+	u8  src_mac0[6];
+};
+
+struct cpl_smt_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_smt_read_req {
+	union opcode_tid ot;
+	u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:4;
+	u8 iff:4;
+#else
+	u8 iff:4;
+	u8 rsvd1:4;
+#endif
+	u16 rsvd2;
+};
+
+struct cpl_smt_read_rpl {
+	union opcode_tid ot;
+	u8 status;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:1;
+	u8 mtu_idx:3;
+	u8 rsvd0:4;
+#else
+	u8 rsvd0:4;
+	u8 mtu_idx:3;
+	u8 rsvd1:1;
+#endif
+	u16 rsvd2;
+	u16 rsvd3;
+	u8  src_mac1[6];
+	u16 rsvd4;
+	u8  src_mac0[6];
+};
+
+struct cpl_rte_delete_req {
+	union opcode_tid ot;
+	u32 params;
+};
+
+struct cpl_rte_delete_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_rte_write_req {
+	union opcode_tid ot;
+	u32 params;
+	u32 netmask;
+	u32 faddr;
+};
+
+struct cpl_rte_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_rte_read_req {
+	union opcode_tid ot;
+	u32 params;
+};
+
+struct cpl_rte_read_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd0[2];
+	u8 l2t_idx;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:7;
+	u8 select:1;
+#else
+	u8 select:1;
+	u8 rsvd1:7;
+#endif
+	u8 rsvd2[3];
+	u32 addr;
+};
+
+struct cpl_mss_change {
+	union opcode_tid ot;
+	u32 mss;
+};
+
 #endif /* _CXGB_CPL5_CMD_H_ */
+

drivers/net/chelsio/cxgb2.c

@@ -53,7 +53,9 @@
 #include "gmac.h"
 #include "cphy.h"
 #include "sge.h"
+#include "tp.h"
 #include "espi.h"
+#include "elmer0.h"
 
 #include <linux/workqueue.h>
 
@@ -73,10 +75,9 @@ static inline void cancel_mac_stats_update(struct adapter *ap)
 #define MAX_RX_JUMBO_BUFFERS 16384
 #define MAX_TX_BUFFERS_HIGH	16384U
 #define MAX_TX_BUFFERS_LOW	1536U
+#define MAX_TX_BUFFERS		1460U
 #define MIN_FL_ENTRIES 32
 
-#define PORT_MASK ((1 << MAX_NPORTS) - 1)
-
 #define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
 			 NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
 			 NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
@@ -94,8 +95,17 @@ MODULE_LICENSE("GPL");
 static int dflt_msg_enable = DFLT_MSG_ENABLE;
 
 module_param(dflt_msg_enable, int, 0);
-MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap");
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 default message enable bitmap");
+
+#define HCLOCK 0x0
+#define LCLOCK 0x1
 
+/* T1 cards powersave mode */
+static int t1_clock(struct adapter *adapter, int mode);
+static int t1powersave = 1;	/* HW default is powersave mode. */
+
+module_param(t1powersave, int, 0);
+MODULE_PARM_DESC(t1powersave, "Enable/Disable T1 powersaving mode");
 
 static const char pci_speed[][4] = {
 	"33", "66", "100", "133"
@@ -135,7 +145,7 @@ static void link_report(struct port_info *p)
 	}
 }
 
-void t1_link_changed(struct adapter *adapter, int port_id, int link_stat,
+void t1_link_negotiated(struct adapter *adapter, int port_id, int link_stat,
 			int speed, int duplex, int pause)
 {
 	struct port_info *p = &adapter->port[port_id];
@@ -147,6 +157,22 @@ void t1_link_changed(struct adapter *adapter, int port_id, int link_stat,
 			netif_carrier_off(p->dev);
 		link_report(p);
 
+		/* multi-ports: inform toe */
+		if ((speed > 0) && (adapter->params.nports > 1)) {
+			unsigned int sched_speed = 10;
+			switch (speed) {
+			case SPEED_1000:
+				sched_speed = 1000;
+				break;
+			case SPEED_100:
+				sched_speed = 100;
+				break;
+			case SPEED_10:
+				sched_speed = 10;
+				break;
+			}
+			t1_sched_update_parms(adapter->sge, port_id, 0, sched_speed);
+		}
 	}
 }
 
@@ -165,8 +191,10 @@ static void link_start(struct port_info *p)
 static void enable_hw_csum(struct adapter *adapter)
 {
 	if (adapter->flags & TSO_CAPABLE)
-		t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */
-	t1_tp_set_tcp_checksum_offload(adapter, 1);
+		t1_tp_set_ip_checksum_offload(adapter->tp, 1);	/* for TSO only */
+	if (adapter->flags & UDP_CSUM_CAPABLE)
+		t1_tp_set_udp_checksum_offload(adapter->tp, 1);
+	t1_tp_set_tcp_checksum_offload(adapter->tp, 1);
 }
 
 /*
@@ -468,6 +496,18 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
 	*data++ = (u64)t->tx_reg_pkts;
 	*data++ = (u64)t->tx_lso_pkts;
 	*data++ = (u64)t->tx_do_cksum;
+
+	if (adapter->espi) {
+		const struct espi_intr_counts *e;
+
+		e = t1_espi_get_intr_counts(adapter->espi);
+		*data++ = (u64) e->DIP2_parity_err;
+		*data++ = (u64) e->DIP4_err;
+		*data++ = (u64) e->rx_drops;
+		*data++ = (u64) e->tx_drops;
+		*data++ = (u64) e->rx_ovflw;
+		*data++ = (u64) e->parity_err;
+	}
 }
 
 static inline void reg_block_dump(struct adapter *ap, void *buf,
@@ -491,6 +531,15 @@ static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
 
 	memset(buf, 0, T2_REGMAP_SIZE);
 	reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER);
+	reg_block_dump(ap, buf, A_MC3_CFG, A_MC4_INT_CAUSE);
+	reg_block_dump(ap, buf, A_TPI_ADDR, A_TPI_PAR);
+	reg_block_dump(ap, buf, A_TP_IN_CONFIG, A_TP_TX_DROP_COUNT);
+	reg_block_dump(ap, buf, A_RAT_ROUTE_CONTROL, A_RAT_INTR_CAUSE);
+	reg_block_dump(ap, buf, A_CSPI_RX_AE_WM, A_CSPI_INTR_ENABLE);
+	reg_block_dump(ap, buf, A_ESPI_SCH_TOKEN0, A_ESPI_GOSTAT);
+	reg_block_dump(ap, buf, A_ULP_ULIMIT, A_ULP_PIO_CTRL);
+	reg_block_dump(ap, buf, A_PL_ENABLE, A_PL_CAUSE);
+	reg_block_dump(ap, buf, A_MC5_CONFIG, A_MC5_MASK_WRITE_CMD);
 }
 
 static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
@@ -729,7 +778,9 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 
 static int get_eeprom_len(struct net_device *dev)
 {
-	return EEPROM_SIZE;
+ 	struct adapter *adapter = dev->priv;
+
+ 	return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
 }
 
 #define EEPROM_MAGIC(ap) \
@@ -914,7 +965,7 @@ static void ext_intr_task(void *data)
 {
 	struct adapter *adapter = data;
 
-	elmer0_ext_intr_handler(adapter);
+	t1_elmer0_ext_intr_handler(adapter);
 
 	/* Now reenable external interrupts */
 	spin_lock_irq(&adapter->async_lock);
@@ -1074,16 +1125,19 @@ static int __devinit init_one(struct pci_dev *pdev,
 			netdev->vlan_rx_register = vlan_rx_register;
 			netdev->vlan_rx_kill_vid = vlan_rx_kill_vid;
 #endif
+
+			/* T204: disable TSO */
+			if (!(is_T2(adapter)) || bi->port_number != 4) {
 				adapter->flags |= TSO_CAPABLE;
 				netdev->features |= NETIF_F_TSO;
 			}
+		}
 
 		netdev->open = cxgb_open;
 		netdev->stop = cxgb_close;
 		netdev->hard_start_xmit = t1_start_xmit;
 		netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ?
-			sizeof(struct cpl_tx_pkt_lso) :
-			sizeof(struct cpl_tx_pkt);
+			sizeof(struct cpl_tx_pkt_lso) : sizeof(struct cpl_tx_pkt);
 		netdev->get_stats = t1_get_stats;
 		netdev->set_multicast_list = t1_set_rxmode;
 		netdev->do_ioctl = t1_ioctl;
@@ -1134,6 +1188,17 @@ static int __devinit init_one(struct pci_dev *pdev,
 	       bi->desc, adapter->params.chip_revision,
 	       adapter->params.pci.is_pcix ? "PCIX" : "PCI",
 	       adapter->params.pci.speed, adapter->params.pci.width);
+
+	/*
+	 * Set the T1B ASIC and memory clocks.
+	 */
+	if (t1powersave)
+		adapter->t1powersave = LCLOCK;	/* HW default is powersave mode. */
+	else
+		adapter->t1powersave = HCLOCK;
+	if (t1_is_T1B(adapter))
+		t1_clock(adapter, t1powersave);
+
 	return 0;
 
  out_release_adapter_res:
@@ -1153,6 +1218,155 @@ static int __devinit init_one(struct pci_dev *pdev,
 	return err;
 }
 
+static void bit_bang(struct adapter *adapter, int bitdata, int nbits)
+{
+	int data;
+	int i;
+	u32 val;
+
+	enum {
+		S_CLOCK = 1 << 3,
+		S_DATA = 1 << 4
+	};
+
+	for (i = (nbits - 1); i > -1; i--) {
+
+		udelay(50);
+
+		data = ((bitdata >> i) & 0x1);
+		__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+
+		if (data)
+			val |= S_DATA;
+		else
+			val &= ~S_DATA;
+
+		udelay(50);
+
+		/* Set SCLOCK low */
+		val &= ~S_CLOCK;
+		__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+		udelay(50);
+
+		/* Write SCLOCK high */
+		val |= S_CLOCK;
+		__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+	}
+}
+
+static int t1_clock(struct adapter *adapter, int mode)
+{
+	u32 val;
+	int M_CORE_VAL;
+	int M_MEM_VAL;
+
+	enum {
+		M_CORE_BITS = 9,
+		T_CORE_VAL = 0,
+		T_CORE_BITS = 2,
+		N_CORE_VAL = 0,
+		N_CORE_BITS = 2,
+		M_MEM_BITS = 9,
+		T_MEM_VAL = 0,
+		T_MEM_BITS = 2,
+		N_MEM_VAL = 0,
+		N_MEM_BITS = 2,
+		NP_LOAD = 1 << 17,
+		S_LOAD_MEM = 1 << 5,
+		S_LOAD_CORE = 1 << 6,
+		S_CLOCK = 1 << 3
+	};
+
+	if (!t1_is_T1B(adapter))
+		return -ENODEV;	/* Can't re-clock this chip. */
+
+	if (mode & 2) {
+		return 0;	/* show current mode. */
+	}
+
+	if ((adapter->t1powersave & 1) == (mode & 1))
+		return -EALREADY;	/* ASIC already running in mode. */
+
+	if ((mode & 1) == HCLOCK) {
+		M_CORE_VAL = 0x14;
+		M_MEM_VAL = 0x18;
+		adapter->t1powersave = HCLOCK;	/* overclock */
+	} else {
+		M_CORE_VAL = 0xe;
+		M_MEM_VAL = 0x10;
+		adapter->t1powersave = LCLOCK;	/* underclock */
+	}
+
+	/* Don't interrupt this serial stream! */
+	spin_lock(&adapter->tpi_lock);
+
+	/* Initialize for ASIC core */
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= NP_LOAD;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~S_LOAD_CORE;
+	val &= ~S_CLOCK;
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+
+	/* Serial program the ASIC clock synthesizer */
+	bit_bang(adapter, T_CORE_VAL, T_CORE_BITS);
+	bit_bang(adapter, N_CORE_VAL, N_CORE_BITS);
+	bit_bang(adapter, M_CORE_VAL, M_CORE_BITS);
+	udelay(50);
+
+	/* Finish ASIC core */
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= S_LOAD_CORE;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~S_LOAD_CORE;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+
+	/* Initialize for memory */
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= NP_LOAD;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~S_LOAD_MEM;
+	val &= ~S_CLOCK;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+
+	/* Serial program the memory clock synthesizer */
+	bit_bang(adapter, T_MEM_VAL, T_MEM_BITS);
+	bit_bang(adapter, N_MEM_VAL, N_MEM_BITS);
+	bit_bang(adapter, M_MEM_VAL, M_MEM_BITS);
+	udelay(50);
+
+	/* Finish memory */
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= S_LOAD_MEM;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(50);
+	__t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~S_LOAD_MEM;
+	udelay(50);
+	__t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+	spin_unlock(&adapter->tpi_lock);
+
+	return 0;
+}
+
 static inline void t1_sw_reset(struct pci_dev *pdev)
 {
 	pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3);

drivers/net/chelsio/elmer0.h

@@ -39,6 +39,12 @@
 #ifndef _CXGB_ELMER0_H_
 #define _CXGB_ELMER0_H_
 
+/* ELMER0 flavors */
+enum {
+	ELMER0_XC2S300E_6FT256_C,
+	ELMER0_XC2S100E_6TQ144_C
+};
+
 /* ELMER0 registers */
 #define A_ELMER0_VERSION 0x100000
 #define A_ELMER0_PHY_CFG 0x100004
@@ -149,3 +155,4 @@
 #define MI1_OP_INDIRECT_READ     3
 
 #endif /* _CXGB_ELMER0_H_ */
+

drivers/net/chelsio/espi.c

@@ -81,46 +81,36 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
 	return busy;
 }
 
-/* 1. Deassert rx_reset_core. */
-/* 2. Program TRICN_CNFG registers. */
-/* 3. Deassert rx_reset_link */
 static int tricn_init(adapter_t *adapter)
 {
-	int     i               = 0;
-	int     stat            = 0;
-	int     timeout         = 0;
-	int     is_ready        = 0;
+	int i, sme = 1;
 
-	/* 1 */
-	timeout=1000;
-	do {
-		stat = readl(adapter->regs + A_ESPI_RX_RESET);
-		is_ready = (stat & 0x4);
-		timeout--;
-		udelay(5);
-	} while (!is_ready || (timeout==0));
-	writel(0x2, adapter->regs + A_ESPI_RX_RESET);
-	if (timeout==0)
-	{
-		CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
-		t1_fatal_err(adapter);
+	if (!(readl(adapter->regs + A_ESPI_RX_RESET)  & F_RX_CLK_STATUS)) {
+		CH_ERR("%s: ESPI clock not ready\n", adapter->name);
+		return -1;
 	}
 
-	/* 2 */
+	writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
+
+	if (sme) {
 		tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
 		tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
 		tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
-	for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
-	for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
-	for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
-	for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-	for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
-	for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-	for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80);
-	for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-
-	/* 3 */
-	writel(0x3, adapter->regs + A_ESPI_RX_RESET);
+	}
+	for (i = 1; i <= 8; i++)
+		tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
+	for (i = 1; i <= 2; i++)
+		tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
+	for (i = 1; i <= 3; i++)
+		tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+	tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
+	tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
+	tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
+	tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
+	tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
+
+	writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
+	       adapter->regs + A_ESPI_RX_RESET);
 
 	return 0;
 }
@@ -143,6 +133,7 @@ void t1_espi_intr_enable(struct peespi *espi)
 
 void t1_espi_intr_clear(struct peespi *espi)
 {
+	readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
 	writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
 }
@@ -157,7 +148,6 @@ void t1_espi_intr_disable(struct peespi *espi)
 
 int t1_espi_intr_handler(struct peespi *espi)
 {
-	u32 cnt;
 	u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
 
 	if (status & F_DIP4ERR)
@@ -177,7 +167,7 @@ int t1_espi_intr_handler(struct peespi *espi)
 		 * Must read the error count to clear the interrupt
 		 * that it causes.
 		 */
-		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+		readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	}
 
 	/*
@@ -210,17 +200,45 @@ static void espi_setup_for_pm3393(adapter_t *adapter)
 	writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
 }
 
-/* T2 Init part --  */
-/* 1. Set T_ESPI_MISCCTRL_ADDR */
-/* 2. Init ESPI registers. */
-/* 3. Init TriCN Hard Macro */
-int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+static void espi_setup_for_vsc7321(adapter_t *adapter)
 {
-	u32 cnt;
+        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+        writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+	writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+	writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
+
+	writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+}
+
+/*
+ * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
+ */
+static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
+{
+	writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	if (nports == 4) {
+		if (is_T2(adapter)) {
+			writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+			writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+		} else {
+			writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+			writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+		}
+	} else {
+		writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+		writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	}
+	writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
 
+}
+
+int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+{
 	u32 status_enable_extra = 0;
 	adapter_t *adapter = espi->adapter;
-	u32 status, burstval = 0x800100;
 
 	/* Disable ESPI training.  MACs that can handle it enable it below. */
 	writel(0, adapter->regs + A_ESPI_TRAIN);
@@ -229,38 +247,20 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		writel(V_OUT_OF_SYNC_COUNT(4) |
 		       V_DIP2_PARITY_ERR_THRES(3) |
 		       V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
-		if (nports == 4) {
-			/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
-			burstval = 0x200040;
-		}
-	}
-	writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+        	writel(nports == 4 ? 0x200040 : 0x1000080,
+		       adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+	} else
+        	writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
 
-	switch (mac_type) {
-	case CHBT_MAC_PM3393:
+	if (mac_type == CHBT_MAC_PM3393)
 		espi_setup_for_pm3393(adapter);
-		break;
-	default:
+	else if (mac_type == CHBT_MAC_VSC7321)
+		espi_setup_for_vsc7321(adapter);
+	else if (mac_type == CHBT_MAC_IXF1010) {
+		status_enable_extra = F_INTEL1010MODE;
+		espi_setup_for_ixf1010(adapter, nports);
+	} else
 		return -1;
-	}
-
-	/*
-	 * Make sure any pending interrupts from the SPI are
-	 * Cleared before enabling the interrupt.
-	 */
-	writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
-	status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
-	if (status & F_DIP2PARITYERR) {
-		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
-	}
-
-	/*
-	 * For T1B we need to write 1 to clear ESPI interrupts.  For T2+ we
-	 * write the status as is.
-	 */
-	if (status && t1_is_T1B(espi->adapter))
-		status = 1;
-	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
 
 	writel(status_enable_extra | F_RXSTATUSENABLE,
 	       adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
@@ -271,9 +271,11 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		 * Always position the control at the 1st port egress IN
 		 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
 		 */
-		espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
-				   & ~MON_MASK) | (F_MONITORED_DIRECTION
-				   | F_MONITORED_INTERFACE);
+		espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
+		espi->misc_ctrl &= ~MON_MASK;
+		espi->misc_ctrl |= F_MONITORED_DIRECTION;
+		if (adapter->params.nports == 1)
+			espi->misc_ctrl |= F_MONITORED_INTERFACE;
 		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
 		spin_lock_init(&espi->lock);
 	}
@@ -299,8 +301,7 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
 {
 	struct peespi *espi = adapter->espi;
 
-	if (!is_T2(adapter))
-		return;
+	if (!is_T2(adapter)) return;
 	spin_lock(&espi->lock);
 	espi->misc_ctrl = (val & ~MON_MASK) |
 			  (espi->misc_ctrl & MON_MASK);
@@ -310,27 +311,61 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
 
 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
 {
-	u32 sel;
-
 	struct peespi *espi = adapter->espi;
+	u32 sel;
 
 	if (!is_T2(adapter))
 		return 0;
+
 	sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
 	if (!wait) {
 		if (!spin_trylock(&espi->lock))
 			return 0;
-	}
-	else
+	} else
 		spin_lock(&espi->lock);
+
 	if ((sel != (espi->misc_ctrl & MON_MASK))) {
 		writel(((espi->misc_ctrl & ~MON_MASK) | sel),
 		       adapter->regs + A_ESPI_MISC_CONTROL);
 		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
 		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
-	}
-	else
+	} else
 		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
 	spin_unlock(&espi->lock);
 	return sel;
 }
+
+/*
+ * This function is for T204 only.
+ * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
+ * one shot, since there is no per port counter on the out side.
+ */
+int
+t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
+{
+        struct peespi *espi = adapter->espi;
+	u8 i, nport = (u8)adapter->params.nports;
+
+        if (!wait) {
+                if (!spin_trylock(&espi->lock))
+                        return -1;
+        } else
+                spin_lock(&espi->lock);
+
+	if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
+		espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
+					F_MONITORED_DIRECTION;
+                writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ 	}
+	for (i = 0 ; i < nport; i++, valp++) {
+		if (i) {
+			writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
+			       adapter->regs + A_ESPI_MISC_CONTROL);
+		}
+                *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+        }
+
+        writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+        spin_unlock(&espi->lock);
+        return 0;
+}

drivers/net/chelsio/espi.h

@@ -64,5 +64,6 @@ const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi);
 
 void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val);
 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait);
+int t1_espi_get_mon_t204(adapter_t *, u32 *, u8);
 
 #endif /* _CXGB_ESPI_H_ */

drivers/net/chelsio/fpga_defs.h

+/* $Date: 2005/03/07 23:59:05 $ $RCSfile: fpga_defs.h,v $ $Revision: 1.4 $ */
+
+/*
+ * FPGA specific definitions
+ */
+
+#ifndef __CHELSIO_FPGA_DEFS_H__
+#define __CHELSIO_FPGA_DEFS_H__
+
+#define FPGA_PCIX_ADDR_VERSION               0xA08
+#define FPGA_PCIX_ADDR_STAT                  0xA0C
+
+/* FPGA master interrupt Cause/Enable bits */
+#define FPGA_PCIX_INTERRUPT_SGE_ERROR        0x1
+#define FPGA_PCIX_INTERRUPT_SGE_DATA         0x2
+#define FPGA_PCIX_INTERRUPT_TP               0x4
+#define FPGA_PCIX_INTERRUPT_MC3              0x8
+#define FPGA_PCIX_INTERRUPT_GMAC             0x10
+#define FPGA_PCIX_INTERRUPT_PCIX             0x20
+
+/* TP interrupt register addresses */
+#define FPGA_TP_ADDR_INTERRUPT_ENABLE        0xA10
+#define FPGA_TP_ADDR_INTERRUPT_CAUSE         0xA14
+#define FPGA_TP_ADDR_VERSION                 0xA18
+
+/* TP interrupt Cause/Enable bits */
+#define FPGA_TP_INTERRUPT_MC4                0x1
+#define FPGA_TP_INTERRUPT_MC5                0x2
+
+/*
+ * PM interrupt register addresses
+ */
+#define FPGA_MC3_REG_INTRENABLE              0xA20
+#define FPGA_MC3_REG_INTRCAUSE               0xA24
+#define FPGA_MC3_REG_VERSION                 0xA28
+
+/*
+ * GMAC interrupt register addresses
+ */
+#define FPGA_GMAC_ADDR_INTERRUPT_ENABLE      0xA30
+#define FPGA_GMAC_ADDR_INTERRUPT_CAUSE       0xA34
+#define FPGA_GMAC_ADDR_VERSION               0xA38
+
+/* GMAC Cause/Enable bits */
+#define FPGA_GMAC_INTERRUPT_PORT0            0x1
+#define FPGA_GMAC_INTERRUPT_PORT1            0x2
+#define FPGA_GMAC_INTERRUPT_PORT2            0x4
+#define FPGA_GMAC_INTERRUPT_PORT3            0x8
+
+/* MI0 registers */
+#define A_MI0_CLK 0xb00
+
+#define S_MI0_CLK_DIV    0
+#define M_MI0_CLK_DIV    0xff
+#define V_MI0_CLK_DIV(x) ((x) << S_MI0_CLK_DIV)
+#define G_MI0_CLK_DIV(x) (((x) >> S_MI0_CLK_DIV) & M_MI0_CLK_DIV)
+
+#define S_MI0_CLK_CNT    8
+#define M_MI0_CLK_CNT    0xff
+#define V_MI0_CLK_CNT(x) ((x) << S_MI0_CLK_CNT)
+#define G_MI0_CLK_CNT(x) (((x) >> S_MI0_CLK_CNT) & M_MI0_CLK_CNT)
+
+#define A_MI0_CSR 0xb04
+
+#define S_MI0_CSR_POLL    0
+#define V_MI0_CSR_POLL(x) ((x) << S_MI0_CSR_POLL)
+#define F_MI0_CSR_POLL    V_MI0_CSR_POLL(1U)
+
+#define S_MI0_PREAMBLE    1
+#define V_MI0_PREAMBLE(x) ((x) << S_MI0_PREAMBLE)
+#define F_MI0_PREAMBLE    V_MI0_PREAMBLE(1U)
+
+#define S_MI0_INTR_ENABLE    2
+#define V_MI0_INTR_ENABLE(x) ((x) << S_MI0_INTR_ENABLE)
+#define F_MI0_INTR_ENABLE    V_MI0_INTR_ENABLE(1U)
+
+#define S_MI0_BUSY    3
+#define V_MI0_BUSY(x) ((x) << S_MI0_BUSY)
+#define F_MI0_BUSY    V_MI0_BUSY(1U)
+
+#define S_MI0_MDIO    4
+#define V_MI0_MDIO(x) ((x) << S_MI0_MDIO)
+#define F_MI0_MDIO    V_MI0_MDIO(1U)
+
+#define A_MI0_ADDR 0xb08
+
+#define S_MI0_PHY_REG_ADDR    0
+#define M_MI0_PHY_REG_ADDR    0x1f
+#define V_MI0_PHY_REG_ADDR(x) ((x) << S_MI0_PHY_REG_ADDR)
+#define G_MI0_PHY_REG_ADDR(x) (((x) >> S_MI0_PHY_REG_ADDR) & M_MI0_PHY_REG_ADDR)
+
+#define S_MI0_PHY_ADDR    5
+#define M_MI0_PHY_ADDR    0x1f
+#define V_MI0_PHY_ADDR(x) ((x) << S_MI0_PHY_ADDR)
+#define G_MI0_PHY_ADDR(x) (((x) >> S_MI0_PHY_ADDR) & M_MI0_PHY_ADDR)
+
+#define A_MI0_DATA_EXT 0xb0c
+#define A_MI0_DATA_INT 0xb10
+
+/* GMAC registers */
+#define A_GMAC_MACID_LO 0x28
+#define A_GMAC_MACID_HI 0x2c
+#define A_GMAC_CSR 0x30
+
+#define S_INTERFACE    0
+#define M_INTERFACE    0x3
+#define V_INTERFACE(x) ((x) << S_INTERFACE)
+#define G_INTERFACE(x) (((x) >> S_INTERFACE) & M_INTERFACE)
+
+#define S_MAC_TX_ENABLE    2
+#define V_MAC_TX_ENABLE(x) ((x) << S_MAC_TX_ENABLE)
+#define F_MAC_TX_ENABLE    V_MAC_TX_ENABLE(1U)
+
+#define S_MAC_RX_ENABLE    3
+#define V_MAC_RX_ENABLE(x) ((x) << S_MAC_RX_ENABLE)
+#define F_MAC_RX_ENABLE    V_MAC_RX_ENABLE(1U)
+
+#define S_MAC_LB_ENABLE    4
+#define V_MAC_LB_ENABLE(x) ((x) << S_MAC_LB_ENABLE)
+#define F_MAC_LB_ENABLE    V_MAC_LB_ENABLE(1U)
+
+#define S_MAC_SPEED    5
+#define M_MAC_SPEED    0x3
+#define V_MAC_SPEED(x) ((x) << S_MAC_SPEED)
+#define G_MAC_SPEED(x) (((x) >> S_MAC_SPEED) & M_MAC_SPEED)
+
+#define S_MAC_HD_FC_ENABLE    7
+#define V_MAC_HD_FC_ENABLE(x) ((x) << S_MAC_HD_FC_ENABLE)
+#define F_MAC_HD_FC_ENABLE    V_MAC_HD_FC_ENABLE(1U)
+
+#define S_MAC_HALF_DUPLEX    8
+#define V_MAC_HALF_DUPLEX(x) ((x) << S_MAC_HALF_DUPLEX)
+#define F_MAC_HALF_DUPLEX    V_MAC_HALF_DUPLEX(1U)
+
+#define S_MAC_PROMISC    9
+#define V_MAC_PROMISC(x) ((x) << S_MAC_PROMISC)
+#define F_MAC_PROMISC    V_MAC_PROMISC(1U)
+
+#define S_MAC_MC_ENABLE    10
+#define V_MAC_MC_ENABLE(x) ((x) << S_MAC_MC_ENABLE)
+#define F_MAC_MC_ENABLE    V_MAC_MC_ENABLE(1U)
+
+#define S_MAC_RESET    11
+#define V_MAC_RESET(x) ((x) << S_MAC_RESET)
+#define F_MAC_RESET    V_MAC_RESET(1U)
+
+#define S_MAC_RX_PAUSE_ENABLE    12
+#define V_MAC_RX_PAUSE_ENABLE(x) ((x) << S_MAC_RX_PAUSE_ENABLE)
+#define F_MAC_RX_PAUSE_ENABLE    V_MAC_RX_PAUSE_ENABLE(1U)
+
+#define S_MAC_TX_PAUSE_ENABLE    13
+#define V_MAC_TX_PAUSE_ENABLE(x) ((x) << S_MAC_TX_PAUSE_ENABLE)
+#define F_MAC_TX_PAUSE_ENABLE    V_MAC_TX_PAUSE_ENABLE(1U)
+
+#define S_MAC_LWM_ENABLE    14
+#define V_MAC_LWM_ENABLE(x) ((x) << S_MAC_LWM_ENABLE)
+#define F_MAC_LWM_ENABLE    V_MAC_LWM_ENABLE(1U)
+
+#define S_MAC_MAGIC_PKT_ENABLE    15
+#define V_MAC_MAGIC_PKT_ENABLE(x) ((x) << S_MAC_MAGIC_PKT_ENABLE)
+#define F_MAC_MAGIC_PKT_ENABLE    V_MAC_MAGIC_PKT_ENABLE(1U)
+
+#define S_MAC_ISL_ENABLE    16
+#define V_MAC_ISL_ENABLE(x) ((x) << S_MAC_ISL_ENABLE)
+#define F_MAC_ISL_ENABLE    V_MAC_ISL_ENABLE(1U)
+
+#define S_MAC_JUMBO_ENABLE    17
+#define V_MAC_JUMBO_ENABLE(x) ((x) << S_MAC_JUMBO_ENABLE)
+#define F_MAC_JUMBO_ENABLE    V_MAC_JUMBO_ENABLE(1U)
+
+#define S_MAC_RX_PAD_ENABLE    18
+#define V_MAC_RX_PAD_ENABLE(x) ((x) << S_MAC_RX_PAD_ENABLE)
+#define F_MAC_RX_PAD_ENABLE    V_MAC_RX_PAD_ENABLE(1U)
+
+#define S_MAC_RX_CRC_ENABLE    19
+#define V_MAC_RX_CRC_ENABLE(x) ((x) << S_MAC_RX_CRC_ENABLE)
+#define F_MAC_RX_CRC_ENABLE    V_MAC_RX_CRC_ENABLE(1U)
+
+#define A_GMAC_IFS 0x34
+
+#define S_MAC_IFS2    0
+#define M_MAC_IFS2    0x3f
+#define V_MAC_IFS2(x) ((x) << S_MAC_IFS2)
+#define G_MAC_IFS2(x) (((x) >> S_MAC_IFS2) & M_MAC_IFS2)
+
+#define S_MAC_IFS1    8
+#define M_MAC_IFS1    0x7f
+#define V_MAC_IFS1(x) ((x) << S_MAC_IFS1)
+#define G_MAC_IFS1(x) (((x) >> S_MAC_IFS1) & M_MAC_IFS1)
+
+#define A_GMAC_JUMBO_FRAME_LEN 0x38
+#define A_GMAC_LNK_DLY 0x3c
+#define A_GMAC_PAUSETIME 0x40
+#define A_GMAC_MCAST_LO 0x44
+#define A_GMAC_MCAST_HI 0x48
+#define A_GMAC_MCAST_MASK_LO 0x4c
+#define A_GMAC_MCAST_MASK_HI 0x50
+#define A_GMAC_RMT_CNT 0x54
+#define A_GMAC_RMT_DATA 0x58
+#define A_GMAC_BACKOFF_SEED 0x5c
+#define A_GMAC_TXF_THRES 0x60
+
+#define S_TXF_READ_THRESHOLD    0
+#define M_TXF_READ_THRESHOLD    0xff
+#define V_TXF_READ_THRESHOLD(x) ((x) << S_TXF_READ_THRESHOLD)
+#define G_TXF_READ_THRESHOLD(x) (((x) >> S_TXF_READ_THRESHOLD) & M_TXF_READ_THRESHOLD)
+
+#define S_TXF_WRITE_THRESHOLD    16
+#define M_TXF_WRITE_THRESHOLD    0xff
+#define V_TXF_WRITE_THRESHOLD(x) ((x) << S_TXF_WRITE_THRESHOLD)
+#define G_TXF_WRITE_THRESHOLD(x) (((x) >> S_TXF_WRITE_THRESHOLD) & M_TXF_WRITE_THRESHOLD)
+
+#define MAC_REG_BASE 0x600
+#define MAC_REG_ADDR(idx, reg) (MAC_REG_BASE + (idx) * 128 + (reg))
+
+#define MAC_REG_IDLO(idx)              MAC_REG_ADDR(idx, A_GMAC_MACID_LO)
+#define MAC_REG_IDHI(idx)              MAC_REG_ADDR(idx, A_GMAC_MACID_HI)
+#define MAC_REG_CSR(idx)               MAC_REG_ADDR(idx, A_GMAC_CSR)
+#define MAC_REG_IFS(idx)               MAC_REG_ADDR(idx, A_GMAC_IFS)
+#define MAC_REG_LARGEFRAMELENGTH(idx) MAC_REG_ADDR(idx, A_GMAC_JUMBO_FRAME_LEN)
+#define MAC_REG_LINKDLY(idx)           MAC_REG_ADDR(idx, A_GMAC_LNK_DLY)
+#define MAC_REG_PAUSETIME(idx)         MAC_REG_ADDR(idx, A_GMAC_PAUSETIME)
+#define MAC_REG_CASTLO(idx)            MAC_REG_ADDR(idx, A_GMAC_MCAST_LO)
+#define MAC_REG_MCASTHI(idx)           MAC_REG_ADDR(idx, A_GMAC_MCAST_HI)
+#define MAC_REG_CASTMASKLO(idx)        MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_LO)
+#define MAC_REG_MCASTMASKHI(idx)       MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_HI)
+#define MAC_REG_RMCNT(idx)             MAC_REG_ADDR(idx, A_GMAC_RMT_CNT)
+#define MAC_REG_RMDATA(idx)            MAC_REG_ADDR(idx, A_GMAC_RMT_DATA)
+#define MAC_REG_GMRANDBACKOFFSEED(idx) MAC_REG_ADDR(idx, A_GMAC_BACKOFF_SEED)
+#define MAC_REG_TXFTHRESHOLDS(idx)     MAC_REG_ADDR(idx, A_GMAC_TXF_THRES)
+
+#endif

drivers/net/chelsio/gmac.h

@@ -62,6 +62,8 @@ struct cmac_statistics {
 	u64 TxInternalMACXmitError;
 	u64 TxFramesWithExcessiveDeferral;
 	u64 TxFCSErrors;
+	u64 TxJumboFramesOK;
+	u64 TxJumboOctetsOK;
 
 	/* Receive */
 	u64 RxOctetsOK;
@@ -81,6 +83,8 @@ struct cmac_statistics {
 	u64 RxInRangeLengthErrors;
 	u64 RxOutOfRangeLengthField;
 	u64 RxFrameTooLongErrors;
+	u64 RxJumboFramesOK;
+	u64 RxJumboOctetsOK;
 };
 
 struct cmac_ops {
@@ -128,6 +132,7 @@ struct gmac {
 extern struct gmac t1_pm3393_ops;
 extern struct gmac t1_chelsio_mac_ops;
 extern struct gmac t1_vsc7321_ops;
+extern struct gmac t1_vsc7326_ops;
 extern struct gmac t1_ixf1010_ops;
 extern struct gmac t1_dummy_mac_ops;
 

drivers/net/chelsio/mv88e1xxx.h

+/* $Date: 2005/03/07 23:59:05 $ $RCSfile: mv88e1xxx.h,v $ $Revision: 1.13 $ */
+#ifndef CHELSIO_MV8E1XXX_H
+#define CHELSIO_MV8E1XXX_H
+
+#ifndef BMCR_SPEED1000
+# define BMCR_SPEED1000 0x40
+#endif
+
+#ifndef ADVERTISE_PAUSE
+# define ADVERTISE_PAUSE 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#define MII_GBCR 9       /* 1000Base-T control register */
+#define MII_GBSR 10      /* 1000Base-T status register */
+
+/* 1000Base-T control register fields */
+#define GBCR_ADV_1000HALF         0x100
+#define GBCR_ADV_1000FULL         0x200
+#define GBCR_PREFER_MASTER        0x400
+#define GBCR_MANUAL_AS_MASTER     0x800
+#define GBCR_MANUAL_CONFIG_ENABLE 0x1000
+
+/* 1000Base-T status register fields */
+#define GBSR_LP_1000HALF  0x400
+#define GBSR_LP_1000FULL  0x800
+#define GBSR_REMOTE_OK    0x1000
+#define GBSR_LOCAL_OK     0x2000
+#define GBSR_LOCAL_MASTER 0x4000
+#define GBSR_MASTER_FAULT 0x8000
+
+/* Marvell PHY interrupt status bits. */
+#define MV88E1XXX_INTR_JABBER          0x0001
+#define MV88E1XXX_INTR_POLARITY_CHNG   0x0002
+#define MV88E1XXX_INTR_ENG_DETECT_CHNG 0x0010
+#define MV88E1XXX_INTR_DOWNSHIFT       0x0020
+#define MV88E1XXX_INTR_MDI_XOVER_CHNG  0x0040
+#define MV88E1XXX_INTR_FIFO_OVER_UNDER 0x0080
+#define MV88E1XXX_INTR_FALSE_CARRIER   0x0100
+#define MV88E1XXX_INTR_SYMBOL_ERROR    0x0200
+#define MV88E1XXX_INTR_LINK_CHNG       0x0400
+#define MV88E1XXX_INTR_AUTONEG_DONE    0x0800
+#define MV88E1XXX_INTR_PAGE_RECV       0x1000
+#define MV88E1XXX_INTR_DUPLEX_CHNG     0x2000
+#define MV88E1XXX_INTR_SPEED_CHNG      0x4000
+#define MV88E1XXX_INTR_AUTONEG_ERR     0x8000
+
+/* Marvell PHY specific registers. */
+#define MV88E1XXX_SPECIFIC_CNTRL_REGISTER               16
+#define MV88E1XXX_SPECIFIC_STATUS_REGISTER              17
+#define MV88E1XXX_INTERRUPT_ENABLE_REGISTER             18
+#define MV88E1XXX_INTERRUPT_STATUS_REGISTER             19
+#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_REGISTER       20
+#define MV88E1XXX_RECV_ERR_CNTR_REGISTER                21
+#define MV88E1XXX_RES_REGISTER                          22
+#define MV88E1XXX_GLOBAL_STATUS_REGISTER                23
+#define MV88E1XXX_LED_CONTROL_REGISTER                  24
+#define MV88E1XXX_MANUAL_LED_OVERRIDE_REGISTER          25
+#define MV88E1XXX_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER     26
+#define MV88E1XXX_EXT_PHY_SPECIFIC_STATUS_REGISTER      27
+#define MV88E1XXX_VIRTUAL_CABLE_TESTER_REGISTER         28
+#define MV88E1XXX_EXTENDED_ADDR_REGISTER                29
+#define MV88E1XXX_EXTENDED_REGISTER                     30
+
+/* PHY specific control register fields */
+#define S_PSCR_MDI_XOVER_MODE    5
+#define M_PSCR_MDI_XOVER_MODE    0x3
+#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE)
+#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE)
+
+/* Extended PHY specific control register fields */
+#define S_DOWNSHIFT_ENABLE 8
+#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE)
+
+#define S_DOWNSHIFT_CNT    9
+#define M_DOWNSHIFT_CNT    0x7
+#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT)
+#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT)
+
+/* PHY specific status register fields */
+#define S_PSSR_JABBER 0
+#define V_PSSR_JABBER (1 << S_PSSR_JABBER)
+
+#define S_PSSR_POLARITY 1
+#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY)
+
+#define S_PSSR_RX_PAUSE 2
+#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE)
+
+#define S_PSSR_TX_PAUSE 3
+#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE)
+
+#define S_PSSR_ENERGY_DETECT 4
+#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT)
+
+#define S_PSSR_DOWNSHIFT_STATUS 5
+#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS)
+
+#define S_PSSR_MDI 6
+#define V_PSSR_MDI (1 << S_PSSR_MDI)
+
+#define S_PSSR_CABLE_LEN    7
+#define M_PSSR_CABLE_LEN    0x7
+#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN)
+#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN)
+
+#define S_PSSR_LINK 10
+#define V_PSSR_LINK (1 << S_PSSR_LINK)
+
+#define S_PSSR_STATUS_RESOLVED 11
+#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED)
+
+#define S_PSSR_PAGE_RECEIVED 12
+#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED)
+
+#define S_PSSR_DUPLEX 13
+#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX)
+
+#define S_PSSR_SPEED    14
+#define M_PSSR_SPEED    0x3
+#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED)
+#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED)
+
+#endif

drivers/net/chelsio/mv88x201x.c

@@ -85,29 +85,33 @@ static int mv88x201x_reset(struct cphy *cphy, int wait)
 
 static int mv88x201x_interrupt_enable(struct cphy *cphy)
 {
-	u32 elmer;
-
 	/* Enable PHY LASI interrupts. */
 	mdio_write(cphy, 0x1, 0x9002, 0x1);
 
 	/* Enable Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
 		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
 		elmer |= ELMER0_GP_BIT6;
 		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
 	return 0;
 }
 
 static int mv88x201x_interrupt_disable(struct cphy *cphy)
 {
-	u32 elmer;
-
 	/* Disable PHY LASI interrupts. */
 	mdio_write(cphy, 0x1, 0x9002, 0x0);
 
 	/* Disable Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
+		u32 elmer;
+
 		t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
 		elmer &= ~ELMER0_GP_BIT6;
 		t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	}
 	return 0;
 }
 
@@ -140,9 +144,11 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy)
 #endif
 
 	/* Clear Marvell interrupts through Elmer0. */
+	if (t1_is_asic(cphy->adapter)) {
 		t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
 		elmer |= ELMER0_GP_BIT6;
 		t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+	}
 	return 0;
 }
 

drivers/net/chelsio/my3126.c

+/* $Date: 2005/11/12 02:13:49 $ $RCSfile: my3126.c,v $ $Revision: 1.15 $ */
+#include "cphy.h"
+#include "elmer0.h"
+#include "suni1x10gexp_regs.h"
+
+/* Port Reset */
+static int my3126_reset(struct cphy *cphy, int wait)
+{
+	/*
+	 * This can be done through registers.  It is not required since
+	 * a full chip reset is used.
+	 */
+	return (0);
+}
+
+static int my3126_interrupt_enable(struct cphy *cphy)
+{
+	schedule_delayed_work(&cphy->phy_update, HZ/30);
+	t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
+	return (0);
+}
+
+static int my3126_interrupt_disable(struct cphy *cphy)
+{
+	cancel_rearming_delayed_work(&cphy->phy_update);
+	return (0);
+}
+
+static int my3126_interrupt_clear(struct cphy *cphy)
+{
+	return (0);
+}
+
+#define OFFSET(REG_ADDR)    (REG_ADDR << 2)
+
+static int my3126_interrupt_handler(struct cphy *cphy)
+{
+	u32 val;
+	u16 val16;
+	u16 status;
+	u32 act_count;
+	adapter_t *adapter;
+	adapter = cphy->adapter;
+
+	if (cphy->count == 50) {
+		mdio_read(cphy, 0x1, 0x1, &val);
+		val16 = (u16) val;
+		status = cphy->bmsr ^ val16;
+
+		if (status & BMSR_LSTATUS)
+			t1_link_changed(adapter, 0);
+		cphy->bmsr = val16;
+
+		/* We have only enabled link change interrupts so it
+		   must be that
+		 */
+		cphy->count = 0;
+	}
+
+	t1_tpi_write(adapter, OFFSET(SUNI1x10GEXP_REG_MSTAT_CONTROL),
+		SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
+	t1_tpi_read(adapter,
+		OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW), &act_count);
+	t1_tpi_read(adapter,
+		OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val);
+	act_count += val;
+
+	/* Populate elmer_gpo with the register value */
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	cphy->elmer_gpo = val;
+
+	if ( (val & (1 << 8)) || (val & (1 << 19)) ||
+	     (cphy->act_count == act_count) || cphy->act_on ) {
+		if (is_T2(adapter))
+			val |= (1 << 9);
+		else if (t1_is_T1B(adapter))
+			val |= (1 << 20);
+		cphy->act_on = 0;
+	} else {
+		if (is_T2(adapter))
+			val &= ~(1 << 9);
+		else if (t1_is_T1B(adapter))
+			val &= ~(1 << 20);
+		cphy->act_on = 1;
+	}
+
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+	cphy->elmer_gpo = val;
+	cphy->act_count = act_count;
+	cphy->count++;
+
+	return cphy_cause_link_change;
+}
+
+static void my3216_poll(void *arg)
+{
+	my3126_interrupt_handler(arg);
+}
+
+static int my3126_set_loopback(struct cphy *cphy, int on)
+{
+	return (0);
+}
+
+/* To check the activity LED */
+static int my3126_get_link_status(struct cphy *cphy,
+			int *link_ok, int *speed, int *duplex, int *fc)
+{
+	u32 val;
+	u16 val16;
+	adapter_t *adapter;
+
+	adapter = cphy->adapter;
+	mdio_read(cphy, 0x1, 0x1, &val);
+	val16 = (u16) val;
+
+	/* Populate elmer_gpo with the register value */
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	cphy->elmer_gpo = val;
+
+	*link_ok = (val16 & BMSR_LSTATUS);
+
+	if (*link_ok) {
+		/* Turn on the LED. */
+		if (is_T2(adapter))
+			 val &= ~(1 << 8);
+		else if (t1_is_T1B(adapter))
+			 val &= ~(1 << 19);
+	} else {
+		/* Turn off the LED. */
+		if (is_T2(adapter))
+			 val |= (1 << 8);
+		else if (t1_is_T1B(adapter))
+			 val |= (1 << 19);
+	}
+
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	cphy->elmer_gpo = val;
+	*speed = SPEED_10000;
+	*duplex = DUPLEX_FULL;
+
+	/* need to add flow control */
+	if (fc)
+		*fc = PAUSE_RX | PAUSE_TX;
+
+	return (0);
+}
+
+static void my3126_destroy(struct cphy *cphy)
+{
+	kfree(cphy);
+}
+
+static struct cphy_ops my3126_ops = {
+	.destroy		= my3126_destroy,
+	.reset			= my3126_reset,
+	.interrupt_enable	= my3126_interrupt_enable,
+	.interrupt_disable	= my3126_interrupt_disable,
+	.interrupt_clear	= my3126_interrupt_clear,
+	.interrupt_handler	= my3126_interrupt_handler,
+	.get_link_status	= my3126_get_link_status,
+	.set_loopback		= my3126_set_loopback,
+};
+
+static struct cphy *my3126_phy_create(adapter_t *adapter,
+			int phy_addr, struct mdio_ops *mdio_ops)
+{
+	struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
+
+	if (cphy)
+		cphy_init(cphy, adapter, phy_addr, &my3126_ops, mdio_ops);
+
+	INIT_WORK(&cphy->phy_update, my3216_poll, cphy);
+	cphy->bmsr = 0;
+
+	return (cphy);
+}
+
+/* Chip Reset */
+static int my3126_phy_reset(adapter_t * adapter)
+{
+	u32 val;
+
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~4;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	msleep(100);
+
+	t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+	msleep(1000);
+
+	/* Now lets enable the Laser. Delay 100us */
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= 0x8000;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(100);
+	return (0);
+}
+
+struct gphy t1_my3126_ops = {
+	my3126_phy_create,
+	my3126_phy_reset
+};

drivers/net/chelsio/pm3393.c

@@ -88,6 +88,8 @@ enum {                     /* RMON registers */
 	RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW,
 	RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW,
 	RxUndersizedFrames =  SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW,
+	RxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_25_LOW,
+	RxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_26_LOW,
 
 	TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW,
 	TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW,
@@ -95,7 +97,9 @@ enum {                     /* RMON registers */
 	TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW,
 	TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW,
 	TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW,
-	TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW
+	TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW,
+	TxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_51_LOW,
+	TxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_52_LOW
 };
 
 struct _cmac_instance {
@@ -265,6 +269,8 @@ static int pm3393_interrupt_handler(struct cmac *cmac)
 	/* Read the master interrupt status register. */
 	pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS,
 	       &master_intr_status);
+	CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n",
+	       master_intr_status);
 
 	/* TBD XXX Lets just clear everything for now */
 	pm3393_interrupt_clear(cmac);
@@ -307,11 +313,7 @@ static int pm3393_enable_port(struct cmac *cmac, int which)
 	 * The PHY doesn't give us link status indication on its own so have
 	 * the link management code query it instead.
 	 */
-	{
-		extern void link_changed(adapter_t *adapter, int port_id);
-
-		link_changed(cmac->adapter, 0);
-	}
+	t1_link_changed(cmac->adapter, 0);
 	return 0;
 }
 
@@ -519,6 +521,8 @@ static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
 	RMON_UPDATE(mac, RxJabbers, RxJabberErrors);
 	RMON_UPDATE(mac, RxFragments, RxRuntErrors);
 	RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors);
+	RMON_UPDATE(mac, RxJumboFramesReceivedOK, RxJumboFramesOK);
+	RMON_UPDATE(mac, RxJumboOctetsReceivedOK, RxJumboOctetsOK);
 
 	/* Tx stats */
 	RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK);
@@ -529,6 +533,8 @@ static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
 	RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK);
 	RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK);
 	RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames);
+	RMON_UPDATE(mac, TxJumboFramesReceivedOK, TxJumboFramesOK);
+	RMON_UPDATE(mac, TxJumboOctetsReceivedOK, TxJumboOctetsOK);
 
 	return &mac->stats;
 }
@@ -814,6 +820,12 @@ static int pm3393_mac_reset(adapter_t * adapter)
 
 		successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock
 				    && is_xaui_mabc_pll_locked);
+
+		CH_DBG(adapter, HW,
+		       "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, "
+		       "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n",
+		       i, is_pl4_reset_finished, val, is_pl4_outof_lock,
+		       is_xaui_mabc_pll_locked);
 	}
 	return successful_reset ? 0 : 1;
 }

drivers/net/chelsio/regs.h

@@ -71,6 +71,10 @@
 #define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY)
 #define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY)
 
+#define S_DISABLE_CMDQ0_GTS    8
+#define V_DISABLE_CMDQ0_GTS(x) ((x) << S_DISABLE_CMDQ0_GTS)
+#define F_DISABLE_CMDQ0_GTS    V_DISABLE_CMDQ0_GTS(1U)
+
 #define S_DISABLE_CMDQ1_GTS    9
 #define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS)
 #define F_DISABLE_CMDQ1_GTS    V_DISABLE_CMDQ1_GTS(1U)
@@ -87,12 +91,18 @@
 #define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN)
 #define F_ENABLE_BIG_ENDIAN    V_ENABLE_BIG_ENDIAN(1U)
 
+#define S_FL_SELECTION_CRITERIA    13
+#define V_FL_SELECTION_CRITERIA(x) ((x) << S_FL_SELECTION_CRITERIA)
+#define F_FL_SELECTION_CRITERIA    V_FL_SELECTION_CRITERIA(1U)
+
 #define S_ISCSI_COALESCE    14
 #define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE)
 #define F_ISCSI_COALESCE    V_ISCSI_COALESCE(1U)
 
 #define S_RX_PKT_OFFSET    15
+#define M_RX_PKT_OFFSET    0x7
 #define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET)
+#define G_RX_PKT_OFFSET(x) (((x) >> S_RX_PKT_OFFSET) & M_RX_PKT_OFFSET)
 
 #define S_VLAN_XTRACT    18
 #define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT)
@@ -108,16 +118,114 @@
 #define A_SG_FL1BASELWR 0x20
 #define A_SG_FL1BASEUPR 0x24
 #define A_SG_CMD0SIZE 0x28
+
+#define S_CMDQ0_SIZE    0
+#define M_CMDQ0_SIZE    0x1ffff
+#define V_CMDQ0_SIZE(x) ((x) << S_CMDQ0_SIZE)
+#define G_CMDQ0_SIZE(x) (((x) >> S_CMDQ0_SIZE) & M_CMDQ0_SIZE)
+
 #define A_SG_FL0SIZE 0x2c
+
+#define S_FL0_SIZE    0
+#define M_FL0_SIZE    0x1ffff
+#define V_FL0_SIZE(x) ((x) << S_FL0_SIZE)
+#define G_FL0_SIZE(x) (((x) >> S_FL0_SIZE) & M_FL0_SIZE)
+
 #define A_SG_RSPSIZE 0x30
+
+#define S_RESPQ_SIZE    0
+#define M_RESPQ_SIZE    0x1ffff
+#define V_RESPQ_SIZE(x) ((x) << S_RESPQ_SIZE)
+#define G_RESPQ_SIZE(x) (((x) >> S_RESPQ_SIZE) & M_RESPQ_SIZE)
+
 #define A_SG_RSPBASELWR 0x34
 #define A_SG_RSPBASEUPR 0x38
 #define A_SG_FLTHRESHOLD 0x3c
+
+#define S_FL_THRESHOLD    0
+#define M_FL_THRESHOLD    0xffff
+#define V_FL_THRESHOLD(x) ((x) << S_FL_THRESHOLD)
+#define G_FL_THRESHOLD(x) (((x) >> S_FL_THRESHOLD) & M_FL_THRESHOLD)
+
 #define A_SG_RSPQUEUECREDIT 0x40
+
+#define S_RESPQ_CREDIT    0
+#define M_RESPQ_CREDIT    0x1ffff
+#define V_RESPQ_CREDIT(x) ((x) << S_RESPQ_CREDIT)
+#define G_RESPQ_CREDIT(x) (((x) >> S_RESPQ_CREDIT) & M_RESPQ_CREDIT)
+
 #define A_SG_SLEEPING 0x48
+
+#define S_SLEEPING    0
+#define M_SLEEPING    0xffff
+#define V_SLEEPING(x) ((x) << S_SLEEPING)
+#define G_SLEEPING(x) (((x) >> S_SLEEPING) & M_SLEEPING)
+
 #define A_SG_INTRTIMER 0x4c
+
+#define S_INTERRUPT_TIMER_COUNT    0
+#define M_INTERRUPT_TIMER_COUNT    0xffffff
+#define V_INTERRUPT_TIMER_COUNT(x) ((x) << S_INTERRUPT_TIMER_COUNT)
+#define G_INTERRUPT_TIMER_COUNT(x) (((x) >> S_INTERRUPT_TIMER_COUNT) & M_INTERRUPT_TIMER_COUNT)
+
+#define A_SG_CMD0PTR 0x50
+
+#define S_CMDQ0_POINTER    0
+#define M_CMDQ0_POINTER    0xffff
+#define V_CMDQ0_POINTER(x) ((x) << S_CMDQ0_POINTER)
+#define G_CMDQ0_POINTER(x) (((x) >> S_CMDQ0_POINTER) & M_CMDQ0_POINTER)
+
+#define S_CURRENT_GENERATION_BIT    16
+#define V_CURRENT_GENERATION_BIT(x) ((x) << S_CURRENT_GENERATION_BIT)
+#define F_CURRENT_GENERATION_BIT    V_CURRENT_GENERATION_BIT(1U)
+
+#define A_SG_CMD1PTR 0x54
+
+#define S_CMDQ1_POINTER    0
+#define M_CMDQ1_POINTER    0xffff
+#define V_CMDQ1_POINTER(x) ((x) << S_CMDQ1_POINTER)
+#define G_CMDQ1_POINTER(x) (((x) >> S_CMDQ1_POINTER) & M_CMDQ1_POINTER)
+
+#define A_SG_FL0PTR 0x58
+
+#define S_FL0_POINTER    0
+#define M_FL0_POINTER    0xffff
+#define V_FL0_POINTER(x) ((x) << S_FL0_POINTER)
+#define G_FL0_POINTER(x) (((x) >> S_FL0_POINTER) & M_FL0_POINTER)
+
+#define A_SG_FL1PTR 0x5c
+
+#define S_FL1_POINTER    0
+#define M_FL1_POINTER    0xffff
+#define V_FL1_POINTER(x) ((x) << S_FL1_POINTER)
+#define G_FL1_POINTER(x) (((x) >> S_FL1_POINTER) & M_FL1_POINTER)
+
+#define A_SG_VERSION 0x6c
+
+#define S_DAY    0
+#define M_DAY    0x1f
+#define V_DAY(x) ((x) << S_DAY)
+#define G_DAY(x) (((x) >> S_DAY) & M_DAY)
+
+#define S_MONTH    5
+#define M_MONTH    0xf
+#define V_MONTH(x) ((x) << S_MONTH)
+#define G_MONTH(x) (((x) >> S_MONTH) & M_MONTH)
+
 #define A_SG_CMD1SIZE 0xb0
+
+#define S_CMDQ1_SIZE    0
+#define M_CMDQ1_SIZE    0x1ffff
+#define V_CMDQ1_SIZE(x) ((x) << S_CMDQ1_SIZE)
+#define G_CMDQ1_SIZE(x) (((x) >> S_CMDQ1_SIZE) & M_CMDQ1_SIZE)
+
 #define A_SG_FL1SIZE 0xb4
+
+#define S_FL1_SIZE    0
+#define M_FL1_SIZE    0x1ffff
+#define V_FL1_SIZE(x) ((x) << S_FL1_SIZE)
+#define G_FL1_SIZE(x) (((x) >> S_FL1_SIZE) & M_FL1_SIZE)
+
 #define A_SG_INT_ENABLE 0xb8
 
 #define S_RESPQ_EXHAUSTED    0
@@ -144,21 +252,369 @@
 #define A_SG_RESPACCUTIMER 0xc0
 
 /* MC3 registers */
+#define A_MC3_CFG 0x100
+
+#define S_CLK_ENABLE    0
+#define V_CLK_ENABLE(x) ((x) << S_CLK_ENABLE)
+#define F_CLK_ENABLE    V_CLK_ENABLE(1U)
 
 #define S_READY    1
 #define V_READY(x) ((x) << S_READY)
 #define F_READY    V_READY(1U)
 
-/* MC4 registers */
+#define S_READ_TO_WRITE_DELAY    2
+#define M_READ_TO_WRITE_DELAY    0x7
+#define V_READ_TO_WRITE_DELAY(x) ((x) << S_READ_TO_WRITE_DELAY)
+#define G_READ_TO_WRITE_DELAY(x) (((x) >> S_READ_TO_WRITE_DELAY) & M_READ_TO_WRITE_DELAY)
+
+#define S_WRITE_TO_READ_DELAY    5
+#define M_WRITE_TO_READ_DELAY    0x7
+#define V_WRITE_TO_READ_DELAY(x) ((x) << S_WRITE_TO_READ_DELAY)
+#define G_WRITE_TO_READ_DELAY(x) (((x) >> S_WRITE_TO_READ_DELAY) & M_WRITE_TO_READ_DELAY)
 
+#define S_MC3_BANK_CYCLE    8
+#define M_MC3_BANK_CYCLE    0xf
+#define V_MC3_BANK_CYCLE(x) ((x) << S_MC3_BANK_CYCLE)
+#define G_MC3_BANK_CYCLE(x) (((x) >> S_MC3_BANK_CYCLE) & M_MC3_BANK_CYCLE)
+
+#define S_REFRESH_CYCLE    12
+#define M_REFRESH_CYCLE    0xf
+#define V_REFRESH_CYCLE(x) ((x) << S_REFRESH_CYCLE)
+#define G_REFRESH_CYCLE(x) (((x) >> S_REFRESH_CYCLE) & M_REFRESH_CYCLE)
+
+#define S_PRECHARGE_CYCLE    16
+#define M_PRECHARGE_CYCLE    0x3
+#define V_PRECHARGE_CYCLE(x) ((x) << S_PRECHARGE_CYCLE)
+#define G_PRECHARGE_CYCLE(x) (((x) >> S_PRECHARGE_CYCLE) & M_PRECHARGE_CYCLE)
+
+#define S_ACTIVE_TO_READ_WRITE_DELAY    18
+#define V_ACTIVE_TO_READ_WRITE_DELAY(x) ((x) << S_ACTIVE_TO_READ_WRITE_DELAY)
+#define F_ACTIVE_TO_READ_WRITE_DELAY    V_ACTIVE_TO_READ_WRITE_DELAY(1U)
+
+#define S_ACTIVE_TO_PRECHARGE_DELAY    19
+#define M_ACTIVE_TO_PRECHARGE_DELAY    0x7
+#define V_ACTIVE_TO_PRECHARGE_DELAY(x) ((x) << S_ACTIVE_TO_PRECHARGE_DELAY)
+#define G_ACTIVE_TO_PRECHARGE_DELAY(x) (((x) >> S_ACTIVE_TO_PRECHARGE_DELAY) & M_ACTIVE_TO_PRECHARGE_DELAY)
+
+#define S_WRITE_RECOVERY_DELAY    22
+#define M_WRITE_RECOVERY_DELAY    0x3
+#define V_WRITE_RECOVERY_DELAY(x) ((x) << S_WRITE_RECOVERY_DELAY)
+#define G_WRITE_RECOVERY_DELAY(x) (((x) >> S_WRITE_RECOVERY_DELAY) & M_WRITE_RECOVERY_DELAY)
+
+#define S_DENSITY    24
+#define M_DENSITY    0x3
+#define V_DENSITY(x) ((x) << S_DENSITY)
+#define G_DENSITY(x) (((x) >> S_DENSITY) & M_DENSITY)
+
+#define S_ORGANIZATION    26
+#define V_ORGANIZATION(x) ((x) << S_ORGANIZATION)
+#define F_ORGANIZATION    V_ORGANIZATION(1U)
+
+#define S_BANKS    27
+#define V_BANKS(x) ((x) << S_BANKS)
+#define F_BANKS    V_BANKS(1U)
+
+#define S_UNREGISTERED    28
+#define V_UNREGISTERED(x) ((x) << S_UNREGISTERED)
+#define F_UNREGISTERED    V_UNREGISTERED(1U)
+
+#define S_MC3_WIDTH    29
+#define M_MC3_WIDTH    0x3
+#define V_MC3_WIDTH(x) ((x) << S_MC3_WIDTH)
+#define G_MC3_WIDTH(x) (((x) >> S_MC3_WIDTH) & M_MC3_WIDTH)
+
+#define S_MC3_SLOW    31
+#define V_MC3_SLOW(x) ((x) << S_MC3_SLOW)
+#define F_MC3_SLOW    V_MC3_SLOW(1U)
+
+#define A_MC3_MODE 0x104
+
+#define S_MC3_MODE    0
+#define M_MC3_MODE    0x3fff
+#define V_MC3_MODE(x) ((x) << S_MC3_MODE)
+#define G_MC3_MODE(x) (((x) >> S_MC3_MODE) & M_MC3_MODE)
+
+#define S_BUSY    31
+#define V_BUSY(x) ((x) << S_BUSY)
+#define F_BUSY    V_BUSY(1U)
+
+#define A_MC3_EXT_MODE 0x108
+
+#define S_MC3_EXTENDED_MODE    0
+#define M_MC3_EXTENDED_MODE    0x3fff
+#define V_MC3_EXTENDED_MODE(x) ((x) << S_MC3_EXTENDED_MODE)
+#define G_MC3_EXTENDED_MODE(x) (((x) >> S_MC3_EXTENDED_MODE) & M_MC3_EXTENDED_MODE)
+
+#define A_MC3_PRECHARG 0x10c
+#define A_MC3_REFRESH 0x110
+
+#define S_REFRESH_ENABLE    0
+#define V_REFRESH_ENABLE(x) ((x) << S_REFRESH_ENABLE)
+#define F_REFRESH_ENABLE    V_REFRESH_ENABLE(1U)
+
+#define S_REFRESH_DIVISOR    1
+#define M_REFRESH_DIVISOR    0x3fff
+#define V_REFRESH_DIVISOR(x) ((x) << S_REFRESH_DIVISOR)
+#define G_REFRESH_DIVISOR(x) (((x) >> S_REFRESH_DIVISOR) & M_REFRESH_DIVISOR)
+
+#define A_MC3_STROBE 0x114
+
+#define S_MASTER_DLL_RESET    0
+#define V_MASTER_DLL_RESET(x) ((x) << S_MASTER_DLL_RESET)
+#define F_MASTER_DLL_RESET    V_MASTER_DLL_RESET(1U)
+
+#define S_MASTER_DLL_TAP_COUNT    1
+#define M_MASTER_DLL_TAP_COUNT    0xff
+#define V_MASTER_DLL_TAP_COUNT(x) ((x) << S_MASTER_DLL_TAP_COUNT)
+#define G_MASTER_DLL_TAP_COUNT(x) (((x) >> S_MASTER_DLL_TAP_COUNT) & M_MASTER_DLL_TAP_COUNT)
+
+#define S_MASTER_DLL_LOCKED    9
+#define V_MASTER_DLL_LOCKED(x) ((x) << S_MASTER_DLL_LOCKED)
+#define F_MASTER_DLL_LOCKED    V_MASTER_DLL_LOCKED(1U)
+
+#define S_MASTER_DLL_MAX_TAP_COUNT    10
+#define V_MASTER_DLL_MAX_TAP_COUNT(x) ((x) << S_MASTER_DLL_MAX_TAP_COUNT)
+#define F_MASTER_DLL_MAX_TAP_COUNT    V_MASTER_DLL_MAX_TAP_COUNT(1U)
+
+#define S_MASTER_DLL_TAP_COUNT_OFFSET    11
+#define M_MASTER_DLL_TAP_COUNT_OFFSET    0x3f
+#define V_MASTER_DLL_TAP_COUNT_OFFSET(x) ((x) << S_MASTER_DLL_TAP_COUNT_OFFSET)
+#define G_MASTER_DLL_TAP_COUNT_OFFSET(x) (((x) >> S_MASTER_DLL_TAP_COUNT_OFFSET) & M_MASTER_DLL_TAP_COUNT_OFFSET)
+
+#define S_SLAVE_DLL_RESET    11
+#define V_SLAVE_DLL_RESET(x) ((x) << S_SLAVE_DLL_RESET)
+#define F_SLAVE_DLL_RESET    V_SLAVE_DLL_RESET(1U)
+
+#define S_SLAVE_DLL_DELTA    12
+#define M_SLAVE_DLL_DELTA    0xf
+#define V_SLAVE_DLL_DELTA(x) ((x) << S_SLAVE_DLL_DELTA)
+#define G_SLAVE_DLL_DELTA(x) (((x) >> S_SLAVE_DLL_DELTA) & M_SLAVE_DLL_DELTA)
+
+#define S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT    17
+#define M_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT    0x3f
+#define V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT(x) ((x) << S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT)
+#define G_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT(x) (((x) >> S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT) & M_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT)
+
+#define S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE    23
+#define V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE(x) ((x) << S_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE)
+#define F_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE    V_SLAVE_DELAY_LINE_MANUAL_TAP_COUNT_ENABLE(1U)
+
+#define S_SLAVE_DELAY_LINE_TAP_COUNT    24
+#define M_SLAVE_DELAY_LINE_TAP_COUNT    0x3f
+#define V_SLAVE_DELAY_LINE_TAP_COUNT(x) ((x) << S_SLAVE_DELAY_LINE_TAP_COUNT)
+#define G_SLAVE_DELAY_LINE_TAP_COUNT(x) (((x) >> S_SLAVE_DELAY_LINE_TAP_COUNT) & M_SLAVE_DELAY_LINE_TAP_COUNT)
+
+#define A_MC3_ECC_CNTL 0x118
+
+#define S_ECC_GENERATION_ENABLE    0
+#define V_ECC_GENERATION_ENABLE(x) ((x) << S_ECC_GENERATION_ENABLE)
+#define F_ECC_GENERATION_ENABLE    V_ECC_GENERATION_ENABLE(1U)
+
+#define S_ECC_CHECK_ENABLE    1
+#define V_ECC_CHECK_ENABLE(x) ((x) << S_ECC_CHECK_ENABLE)
+#define F_ECC_CHECK_ENABLE    V_ECC_CHECK_ENABLE(1U)
+
+#define S_CORRECTABLE_ERROR_COUNT    2
+#define M_CORRECTABLE_ERROR_COUNT    0xff
+#define V_CORRECTABLE_ERROR_COUNT(x) ((x) << S_CORRECTABLE_ERROR_COUNT)
+#define G_CORRECTABLE_ERROR_COUNT(x) (((x) >> S_CORRECTABLE_ERROR_COUNT) & M_CORRECTABLE_ERROR_COUNT)
+
+#define S_UNCORRECTABLE_ERROR_COUNT    10
+#define M_UNCORRECTABLE_ERROR_COUNT    0xff
+#define V_UNCORRECTABLE_ERROR_COUNT(x) ((x) << S_UNCORRECTABLE_ERROR_COUNT)
+#define G_UNCORRECTABLE_ERROR_COUNT(x) (((x) >> S_UNCORRECTABLE_ERROR_COUNT) & M_UNCORRECTABLE_ERROR_COUNT)
+
+#define A_MC3_CE_ADDR 0x11c
+
+#define S_MC3_CE_ADDR    4
+#define M_MC3_CE_ADDR    0xfffffff
+#define V_MC3_CE_ADDR(x) ((x) << S_MC3_CE_ADDR)
+#define G_MC3_CE_ADDR(x) (((x) >> S_MC3_CE_ADDR) & M_MC3_CE_ADDR)
+
+#define A_MC3_CE_DATA0 0x120
+#define A_MC3_CE_DATA1 0x124
+#define A_MC3_CE_DATA2 0x128
+#define A_MC3_CE_DATA3 0x12c
+#define A_MC3_CE_DATA4 0x130
+#define A_MC3_UE_ADDR 0x134
+
+#define S_MC3_UE_ADDR    4
+#define M_MC3_UE_ADDR    0xfffffff
+#define V_MC3_UE_ADDR(x) ((x) << S_MC3_UE_ADDR)
+#define G_MC3_UE_ADDR(x) (((x) >> S_MC3_UE_ADDR) & M_MC3_UE_ADDR)
+
+#define A_MC3_UE_DATA0 0x138
+#define A_MC3_UE_DATA1 0x13c
+#define A_MC3_UE_DATA2 0x140
+#define A_MC3_UE_DATA3 0x144
+#define A_MC3_UE_DATA4 0x148
+#define A_MC3_BD_ADDR 0x14c
+#define A_MC3_BD_DATA0 0x150
+#define A_MC3_BD_DATA1 0x154
+#define A_MC3_BD_DATA2 0x158
+#define A_MC3_BD_DATA3 0x15c
+#define A_MC3_BD_DATA4 0x160
+#define A_MC3_BD_OP 0x164
+
+#define S_BACK_DOOR_OPERATION    0
+#define V_BACK_DOOR_OPERATION(x) ((x) << S_BACK_DOOR_OPERATION)
+#define F_BACK_DOOR_OPERATION    V_BACK_DOOR_OPERATION(1U)
+
+#define A_MC3_BIST_ADDR_BEG 0x168
+#define A_MC3_BIST_ADDR_END 0x16c
+#define A_MC3_BIST_DATA 0x170
+#define A_MC3_BIST_OP 0x174
+
+#define S_OP    0
+#define V_OP(x) ((x) << S_OP)
+#define F_OP    V_OP(1U)
+
+#define S_DATA_PATTERN    1
+#define M_DATA_PATTERN    0x3
+#define V_DATA_PATTERN(x) ((x) << S_DATA_PATTERN)
+#define G_DATA_PATTERN(x) (((x) >> S_DATA_PATTERN) & M_DATA_PATTERN)
+
+#define S_CONTINUOUS    3
+#define V_CONTINUOUS(x) ((x) << S_CONTINUOUS)
+#define F_CONTINUOUS    V_CONTINUOUS(1U)
+
+#define A_MC3_INT_ENABLE 0x178
+
+#define S_MC3_CORR_ERR    0
+#define V_MC3_CORR_ERR(x) ((x) << S_MC3_CORR_ERR)
+#define F_MC3_CORR_ERR    V_MC3_CORR_ERR(1U)
+
+#define S_MC3_UNCORR_ERR    1
+#define V_MC3_UNCORR_ERR(x) ((x) << S_MC3_UNCORR_ERR)
+#define F_MC3_UNCORR_ERR    V_MC3_UNCORR_ERR(1U)
+
+#define S_MC3_PARITY_ERR    2
+#define M_MC3_PARITY_ERR    0xff
+#define V_MC3_PARITY_ERR(x) ((x) << S_MC3_PARITY_ERR)
+#define G_MC3_PARITY_ERR(x) (((x) >> S_MC3_PARITY_ERR) & M_MC3_PARITY_ERR)
+
+#define S_MC3_ADDR_ERR    10
+#define V_MC3_ADDR_ERR(x) ((x) << S_MC3_ADDR_ERR)
+#define F_MC3_ADDR_ERR    V_MC3_ADDR_ERR(1U)
+
+#define A_MC3_INT_CAUSE 0x17c
+
+/* MC4 registers */
 #define A_MC4_CFG 0x180
+
+#define S_POWER_UP    0
+#define V_POWER_UP(x) ((x) << S_POWER_UP)
+#define F_POWER_UP    V_POWER_UP(1U)
+
+#define S_MC4_BANK_CYCLE    8
+#define M_MC4_BANK_CYCLE    0x7
+#define V_MC4_BANK_CYCLE(x) ((x) << S_MC4_BANK_CYCLE)
+#define G_MC4_BANK_CYCLE(x) (((x) >> S_MC4_BANK_CYCLE) & M_MC4_BANK_CYCLE)
+
+#define S_MC4_NARROW    24
+#define V_MC4_NARROW(x) ((x) << S_MC4_NARROW)
+#define F_MC4_NARROW    V_MC4_NARROW(1U)
+
 #define S_MC4_SLOW    25
 #define V_MC4_SLOW(x) ((x) << S_MC4_SLOW)
 #define F_MC4_SLOW    V_MC4_SLOW(1U)
 
-/* TPI registers */
+#define S_MC4A_WIDTH    24
+#define M_MC4A_WIDTH    0x3
+#define V_MC4A_WIDTH(x) ((x) << S_MC4A_WIDTH)
+#define G_MC4A_WIDTH(x) (((x) >> S_MC4A_WIDTH) & M_MC4A_WIDTH)
+
+#define S_MC4A_SLOW    26
+#define V_MC4A_SLOW(x) ((x) << S_MC4A_SLOW)
+#define F_MC4A_SLOW    V_MC4A_SLOW(1U)
+
+#define A_MC4_MODE 0x184
+
+#define S_MC4_MODE    0
+#define M_MC4_MODE    0x7fff
+#define V_MC4_MODE(x) ((x) << S_MC4_MODE)
+#define G_MC4_MODE(x) (((x) >> S_MC4_MODE) & M_MC4_MODE)
+
+#define A_MC4_EXT_MODE 0x188
+
+#define S_MC4_EXTENDED_MODE    0
+#define M_MC4_EXTENDED_MODE    0x7fff
+#define V_MC4_EXTENDED_MODE(x) ((x) << S_MC4_EXTENDED_MODE)
+#define G_MC4_EXTENDED_MODE(x) (((x) >> S_MC4_EXTENDED_MODE) & M_MC4_EXTENDED_MODE)
+
+#define A_MC4_REFRESH 0x190
+#define A_MC4_STROBE 0x194
+#define A_MC4_ECC_CNTL 0x198
+#define A_MC4_CE_ADDR 0x19c
+
+#define S_MC4_CE_ADDR    4
+#define M_MC4_CE_ADDR    0xffffff
+#define V_MC4_CE_ADDR(x) ((x) << S_MC4_CE_ADDR)
+#define G_MC4_CE_ADDR(x) (((x) >> S_MC4_CE_ADDR) & M_MC4_CE_ADDR)
+
+#define A_MC4_CE_DATA0 0x1a0
+#define A_MC4_CE_DATA1 0x1a4
+#define A_MC4_CE_DATA2 0x1a8
+#define A_MC4_CE_DATA3 0x1ac
+#define A_MC4_CE_DATA4 0x1b0
+#define A_MC4_UE_ADDR 0x1b4
+
+#define S_MC4_UE_ADDR    4
+#define M_MC4_UE_ADDR    0xffffff
+#define V_MC4_UE_ADDR(x) ((x) << S_MC4_UE_ADDR)
+#define G_MC4_UE_ADDR(x) (((x) >> S_MC4_UE_ADDR) & M_MC4_UE_ADDR)
+
+#define A_MC4_UE_DATA0 0x1b8
+#define A_MC4_UE_DATA1 0x1bc
+#define A_MC4_UE_DATA2 0x1c0
+#define A_MC4_UE_DATA3 0x1c4
+#define A_MC4_UE_DATA4 0x1c8
+#define A_MC4_BD_ADDR 0x1cc
+
+#define S_MC4_BACK_DOOR_ADDR    0
+#define M_MC4_BACK_DOOR_ADDR    0xfffffff
+#define V_MC4_BACK_DOOR_ADDR(x) ((x) << S_MC4_BACK_DOOR_ADDR)
+#define G_MC4_BACK_DOOR_ADDR(x) (((x) >> S_MC4_BACK_DOOR_ADDR) & M_MC4_BACK_DOOR_ADDR)
+
+#define A_MC4_BD_DATA0 0x1d0
+#define A_MC4_BD_DATA1 0x1d4
+#define A_MC4_BD_DATA2 0x1d8
+#define A_MC4_BD_DATA3 0x1dc
+#define A_MC4_BD_DATA4 0x1e0
+#define A_MC4_BD_OP 0x1e4
+
+#define S_OPERATION    0
+#define V_OPERATION(x) ((x) << S_OPERATION)
+#define F_OPERATION    V_OPERATION(1U)
+
+#define A_MC4_BIST_ADDR_BEG 0x1e8
+#define A_MC4_BIST_ADDR_END 0x1ec
+#define A_MC4_BIST_DATA 0x1f0
+#define A_MC4_BIST_OP 0x1f4
+#define A_MC4_INT_ENABLE 0x1f8
+
+#define S_MC4_CORR_ERR    0
+#define V_MC4_CORR_ERR(x) ((x) << S_MC4_CORR_ERR)
+#define F_MC4_CORR_ERR    V_MC4_CORR_ERR(1U)
+
+#define S_MC4_UNCORR_ERR    1
+#define V_MC4_UNCORR_ERR(x) ((x) << S_MC4_UNCORR_ERR)
+#define F_MC4_UNCORR_ERR    V_MC4_UNCORR_ERR(1U)
+
+#define S_MC4_ADDR_ERR    2
+#define V_MC4_ADDR_ERR(x) ((x) << S_MC4_ADDR_ERR)
+#define F_MC4_ADDR_ERR    V_MC4_ADDR_ERR(1U)
+
+#define A_MC4_INT_CAUSE 0x1fc
 
+/* TPI registers */
 #define A_TPI_ADDR 0x280
+
+#define S_TPI_ADDRESS    0
+#define M_TPI_ADDRESS    0xffffff
+#define V_TPI_ADDRESS(x) ((x) << S_TPI_ADDRESS)
+#define G_TPI_ADDRESS(x) (((x) >> S_TPI_ADDRESS) & M_TPI_ADDRESS)
+
 #define A_TPI_WR_DATA 0x284
 #define A_TPI_RD_DATA 0x288
 #define A_TPI_CSR 0x28c
@@ -171,6 +627,10 @@
 #define V_TPIRDY(x) ((x) << S_TPIRDY)
 #define F_TPIRDY    V_TPIRDY(1U)
 
+#define S_INT_DIR    31
+#define V_INT_DIR(x) ((x) << S_INT_DIR)
+#define F_INT_DIR    V_INT_DIR(1U)
+
 #define A_TPI_PAR 0x29c
 
 #define S_TPIPAR    0
@@ -178,14 +638,26 @@
 #define V_TPIPAR(x) ((x) << S_TPIPAR)
 #define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR)
 
-/* TP registers */
 
+/* TP registers */
 #define A_TP_IN_CONFIG 0x300
 
+#define S_TP_IN_CSPI_TUNNEL    0
+#define V_TP_IN_CSPI_TUNNEL(x) ((x) << S_TP_IN_CSPI_TUNNEL)
+#define F_TP_IN_CSPI_TUNNEL    V_TP_IN_CSPI_TUNNEL(1U)
+
+#define S_TP_IN_CSPI_ETHERNET    1
+#define V_TP_IN_CSPI_ETHERNET(x) ((x) << S_TP_IN_CSPI_ETHERNET)
+#define F_TP_IN_CSPI_ETHERNET    V_TP_IN_CSPI_ETHERNET(1U)
+
 #define S_TP_IN_CSPI_CPL    3
 #define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL)
 #define F_TP_IN_CSPI_CPL    V_TP_IN_CSPI_CPL(1U)
 
+#define S_TP_IN_CSPI_POS    4
+#define V_TP_IN_CSPI_POS(x) ((x) << S_TP_IN_CSPI_POS)
+#define F_TP_IN_CSPI_POS    V_TP_IN_CSPI_POS(1U)
+
 #define S_TP_IN_CSPI_CHECK_IP_CSUM    5
 #define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM)
 #define F_TP_IN_CSPI_CHECK_IP_CSUM    V_TP_IN_CSPI_CHECK_IP_CSUM(1U)
@@ -194,10 +666,22 @@
 #define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM)
 #define F_TP_IN_CSPI_CHECK_TCP_CSUM    V_TP_IN_CSPI_CHECK_TCP_CSUM(1U)
 
+#define S_TP_IN_ESPI_TUNNEL    7
+#define V_TP_IN_ESPI_TUNNEL(x) ((x) << S_TP_IN_ESPI_TUNNEL)
+#define F_TP_IN_ESPI_TUNNEL    V_TP_IN_ESPI_TUNNEL(1U)
+
 #define S_TP_IN_ESPI_ETHERNET    8
 #define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET)
 #define F_TP_IN_ESPI_ETHERNET    V_TP_IN_ESPI_ETHERNET(1U)
 
+#define S_TP_IN_ESPI_CPL    10
+#define V_TP_IN_ESPI_CPL(x) ((x) << S_TP_IN_ESPI_CPL)
+#define F_TP_IN_ESPI_CPL    V_TP_IN_ESPI_CPL(1U)
+
+#define S_TP_IN_ESPI_POS    11
+#define V_TP_IN_ESPI_POS(x) ((x) << S_TP_IN_ESPI_POS)
+#define F_TP_IN_ESPI_POS    V_TP_IN_ESPI_POS(1U)
+
 #define S_TP_IN_ESPI_CHECK_IP_CSUM    12
 #define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM)
 #define F_TP_IN_ESPI_CHECK_IP_CSUM    V_TP_IN_ESPI_CHECK_IP_CSUM(1U)
@@ -212,14 +696,42 @@
 
 #define A_TP_OUT_CONFIG 0x304
 
+#define S_TP_OUT_C_ETH    0
+#define V_TP_OUT_C_ETH(x) ((x) << S_TP_OUT_C_ETH)
+#define F_TP_OUT_C_ETH    V_TP_OUT_C_ETH(1U)
+
 #define S_TP_OUT_CSPI_CPL    2
 #define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL)
 #define F_TP_OUT_CSPI_CPL    V_TP_OUT_CSPI_CPL(1U)
 
+#define S_TP_OUT_CSPI_POS    3
+#define V_TP_OUT_CSPI_POS(x) ((x) << S_TP_OUT_CSPI_POS)
+#define F_TP_OUT_CSPI_POS    V_TP_OUT_CSPI_POS(1U)
+
+#define S_TP_OUT_CSPI_GENERATE_IP_CSUM    4
+#define V_TP_OUT_CSPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_CSPI_GENERATE_IP_CSUM)
+#define F_TP_OUT_CSPI_GENERATE_IP_CSUM    V_TP_OUT_CSPI_GENERATE_IP_CSUM(1U)
+
+#define S_TP_OUT_CSPI_GENERATE_TCP_CSUM    5
+#define V_TP_OUT_CSPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_CSPI_GENERATE_TCP_CSUM)
+#define F_TP_OUT_CSPI_GENERATE_TCP_CSUM    V_TP_OUT_CSPI_GENERATE_TCP_CSUM(1U)
+
 #define S_TP_OUT_ESPI_ETHERNET    6
 #define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET)
 #define F_TP_OUT_ESPI_ETHERNET    V_TP_OUT_ESPI_ETHERNET(1U)
 
+#define S_TP_OUT_ESPI_TAG_ETHERNET    7
+#define V_TP_OUT_ESPI_TAG_ETHERNET(x) ((x) << S_TP_OUT_ESPI_TAG_ETHERNET)
+#define F_TP_OUT_ESPI_TAG_ETHERNET    V_TP_OUT_ESPI_TAG_ETHERNET(1U)
+
+#define S_TP_OUT_ESPI_CPL    8
+#define V_TP_OUT_ESPI_CPL(x) ((x) << S_TP_OUT_ESPI_CPL)
+#define F_TP_OUT_ESPI_CPL    V_TP_OUT_ESPI_CPL(1U)
+
+#define S_TP_OUT_ESPI_POS    9
+#define V_TP_OUT_ESPI_POS(x) ((x) << S_TP_OUT_ESPI_POS)
+#define F_TP_OUT_ESPI_POS    V_TP_OUT_ESPI_POS(1U)
+
 #define S_TP_OUT_ESPI_GENERATE_IP_CSUM    10
 #define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM)
 #define F_TP_OUT_ESPI_GENERATE_IP_CSUM    V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U)
@@ -233,6 +745,16 @@
 #define S_IP_TTL    0
 #define M_IP_TTL    0xff
 #define V_IP_TTL(x) ((x) << S_IP_TTL)
+#define G_IP_TTL(x) (((x) >> S_IP_TTL) & M_IP_TTL)
+
+#define S_TCAM_SERVER_REGION_USAGE    8
+#define M_TCAM_SERVER_REGION_USAGE    0x3
+#define V_TCAM_SERVER_REGION_USAGE(x) ((x) << S_TCAM_SERVER_REGION_USAGE)
+#define G_TCAM_SERVER_REGION_USAGE(x) (((x) >> S_TCAM_SERVER_REGION_USAGE) & M_TCAM_SERVER_REGION_USAGE)
+
+#define S_QOS_MAPPING    10
+#define V_QOS_MAPPING(x) ((x) << S_QOS_MAPPING)
+#define F_QOS_MAPPING    V_QOS_MAPPING(1U)
 
 #define S_TCP_CSUM    11
 #define V_TCP_CSUM(x) ((x) << S_TCP_CSUM)
@@ -246,31 +768,476 @@
 #define V_IP_CSUM(x) ((x) << S_IP_CSUM)
 #define F_IP_CSUM    V_IP_CSUM(1U)
 
+#define S_IP_ID_SPLIT    14
+#define V_IP_ID_SPLIT(x) ((x) << S_IP_ID_SPLIT)
+#define F_IP_ID_SPLIT    V_IP_ID_SPLIT(1U)
+
 #define S_PATH_MTU    15
 #define V_PATH_MTU(x) ((x) << S_PATH_MTU)
 #define F_PATH_MTU    V_PATH_MTU(1U)
 
 #define S_5TUPLE_LOOKUP    17
+#define M_5TUPLE_LOOKUP    0x3
 #define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP)
+#define G_5TUPLE_LOOKUP(x) (((x) >> S_5TUPLE_LOOKUP) & M_5TUPLE_LOOKUP)
+
+#define S_IP_FRAGMENT_DROP    19
+#define V_IP_FRAGMENT_DROP(x) ((x) << S_IP_FRAGMENT_DROP)
+#define F_IP_FRAGMENT_DROP    V_IP_FRAGMENT_DROP(1U)
+
+#define S_PING_DROP    20
+#define V_PING_DROP(x) ((x) << S_PING_DROP)
+#define F_PING_DROP    V_PING_DROP(1U)
+
+#define S_PROTECT_MODE    21
+#define V_PROTECT_MODE(x) ((x) << S_PROTECT_MODE)
+#define F_PROTECT_MODE    V_PROTECT_MODE(1U)
+
+#define S_SYN_COOKIE_ALGORITHM    22
+#define V_SYN_COOKIE_ALGORITHM(x) ((x) << S_SYN_COOKIE_ALGORITHM)
+#define F_SYN_COOKIE_ALGORITHM    V_SYN_COOKIE_ALGORITHM(1U)
+
+#define S_ATTACK_FILTER    23
+#define V_ATTACK_FILTER(x) ((x) << S_ATTACK_FILTER)
+#define F_ATTACK_FILTER    V_ATTACK_FILTER(1U)
+
+#define S_INTERFACE_TYPE    24
+#define V_INTERFACE_TYPE(x) ((x) << S_INTERFACE_TYPE)
+#define F_INTERFACE_TYPE    V_INTERFACE_TYPE(1U)
+
+#define S_DISABLE_RX_FLOW_CONTROL    25
+#define V_DISABLE_RX_FLOW_CONTROL(x) ((x) << S_DISABLE_RX_FLOW_CONTROL)
+#define F_DISABLE_RX_FLOW_CONTROL    V_DISABLE_RX_FLOW_CONTROL(1U)
 
 #define S_SYN_COOKIE_PARAMETER    26
+#define M_SYN_COOKIE_PARAMETER    0x3f
 #define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER)
+#define G_SYN_COOKIE_PARAMETER(x) (((x) >> S_SYN_COOKIE_PARAMETER) & M_SYN_COOKIE_PARAMETER)
+
+#define A_TP_GLOBAL_RX_CREDITS 0x30c
+#define A_TP_CM_SIZE 0x310
+#define A_TP_CM_MM_BASE 0x314
+
+#define S_CM_MEMMGR_BASE    0
+#define M_CM_MEMMGR_BASE    0xfffffff
+#define V_CM_MEMMGR_BASE(x) ((x) << S_CM_MEMMGR_BASE)
+#define G_CM_MEMMGR_BASE(x) (((x) >> S_CM_MEMMGR_BASE) & M_CM_MEMMGR_BASE)
+
+#define A_TP_CM_TIMER_BASE 0x318
+
+#define S_CM_TIMER_BASE    0
+#define M_CM_TIMER_BASE    0xfffffff
+#define V_CM_TIMER_BASE(x) ((x) << S_CM_TIMER_BASE)
+#define G_CM_TIMER_BASE(x) (((x) >> S_CM_TIMER_BASE) & M_CM_TIMER_BASE)
+
+#define A_TP_PM_SIZE 0x31c
+#define A_TP_PM_TX_BASE 0x320
+#define A_TP_PM_DEFRAG_BASE 0x324
+#define A_TP_PM_RX_BASE 0x328
+#define A_TP_PM_RX_PG_SIZE 0x32c
+#define A_TP_PM_RX_MAX_PGS 0x330
+#define A_TP_PM_TX_PG_SIZE 0x334
+#define A_TP_PM_TX_MAX_PGS 0x338
+#define A_TP_TCP_OPTIONS 0x340
+
+#define S_TIMESTAMP    0
+#define M_TIMESTAMP    0x3
+#define V_TIMESTAMP(x) ((x) << S_TIMESTAMP)
+#define G_TIMESTAMP(x) (((x) >> S_TIMESTAMP) & M_TIMESTAMP)
+
+#define S_WINDOW_SCALE    2
+#define M_WINDOW_SCALE    0x3
+#define V_WINDOW_SCALE(x) ((x) << S_WINDOW_SCALE)
+#define G_WINDOW_SCALE(x) (((x) >> S_WINDOW_SCALE) & M_WINDOW_SCALE)
+
+#define S_SACK    4
+#define M_SACK    0x3
+#define V_SACK(x) ((x) << S_SACK)
+#define G_SACK(x) (((x) >> S_SACK) & M_SACK)
+
+#define S_ECN    6
+#define M_ECN    0x3
+#define V_ECN(x) ((x) << S_ECN)
+#define G_ECN(x) (((x) >> S_ECN) & M_ECN)
+
+#define S_SACK_ALGORITHM    8
+#define M_SACK_ALGORITHM    0x3
+#define V_SACK_ALGORITHM(x) ((x) << S_SACK_ALGORITHM)
+#define G_SACK_ALGORITHM(x) (((x) >> S_SACK_ALGORITHM) & M_SACK_ALGORITHM)
+
+#define S_MSS    10
+#define V_MSS(x) ((x) << S_MSS)
+#define F_MSS    V_MSS(1U)
+
+#define S_DEFAULT_PEER_MSS    16
+#define M_DEFAULT_PEER_MSS    0xffff
+#define V_DEFAULT_PEER_MSS(x) ((x) << S_DEFAULT_PEER_MSS)
+#define G_DEFAULT_PEER_MSS(x) (((x) >> S_DEFAULT_PEER_MSS) & M_DEFAULT_PEER_MSS)
+
+#define A_TP_DACK_CONFIG 0x344
+
+#define S_DACK_MODE    0
+#define V_DACK_MODE(x) ((x) << S_DACK_MODE)
+#define F_DACK_MODE    V_DACK_MODE(1U)
+
+#define S_DACK_AUTO_MGMT    1
+#define V_DACK_AUTO_MGMT(x) ((x) << S_DACK_AUTO_MGMT)
+#define F_DACK_AUTO_MGMT    V_DACK_AUTO_MGMT(1U)
+
+#define S_DACK_AUTO_CAREFUL    2
+#define V_DACK_AUTO_CAREFUL(x) ((x) << S_DACK_AUTO_CAREFUL)
+#define F_DACK_AUTO_CAREFUL    V_DACK_AUTO_CAREFUL(1U)
+
+#define S_DACK_MSS_SELECTOR    3
+#define M_DACK_MSS_SELECTOR    0x3
+#define V_DACK_MSS_SELECTOR(x) ((x) << S_DACK_MSS_SELECTOR)
+#define G_DACK_MSS_SELECTOR(x) (((x) >> S_DACK_MSS_SELECTOR) & M_DACK_MSS_SELECTOR)
+
+#define S_DACK_BYTE_THRESHOLD    5
+#define M_DACK_BYTE_THRESHOLD    0xfffff
+#define V_DACK_BYTE_THRESHOLD(x) ((x) << S_DACK_BYTE_THRESHOLD)
+#define G_DACK_BYTE_THRESHOLD(x) (((x) >> S_DACK_BYTE_THRESHOLD) & M_DACK_BYTE_THRESHOLD)
 
 #define A_TP_PC_CONFIG 0x348
+
+#define S_TP_ACCESS_LATENCY    0
+#define M_TP_ACCESS_LATENCY    0xf
+#define V_TP_ACCESS_LATENCY(x) ((x) << S_TP_ACCESS_LATENCY)
+#define G_TP_ACCESS_LATENCY(x) (((x) >> S_TP_ACCESS_LATENCY) & M_TP_ACCESS_LATENCY)
+
+#define S_HELD_FIN_DISABLE    4
+#define V_HELD_FIN_DISABLE(x) ((x) << S_HELD_FIN_DISABLE)
+#define F_HELD_FIN_DISABLE    V_HELD_FIN_DISABLE(1U)
+
+#define S_DDP_FC_ENABLE    5
+#define V_DDP_FC_ENABLE(x) ((x) << S_DDP_FC_ENABLE)
+#define F_DDP_FC_ENABLE    V_DDP_FC_ENABLE(1U)
+
+#define S_RDMA_ERR_ENABLE    6
+#define V_RDMA_ERR_ENABLE(x) ((x) << S_RDMA_ERR_ENABLE)
+#define F_RDMA_ERR_ENABLE    V_RDMA_ERR_ENABLE(1U)
+
+#define S_FAST_PDU_DELIVERY    7
+#define V_FAST_PDU_DELIVERY(x) ((x) << S_FAST_PDU_DELIVERY)
+#define F_FAST_PDU_DELIVERY    V_FAST_PDU_DELIVERY(1U)
+
+#define S_CLEAR_FIN    8
+#define V_CLEAR_FIN(x) ((x) << S_CLEAR_FIN)
+#define F_CLEAR_FIN    V_CLEAR_FIN(1U)
+
 #define S_DIS_TX_FILL_WIN_PUSH    12
 #define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH)
 #define F_DIS_TX_FILL_WIN_PUSH    V_DIS_TX_FILL_WIN_PUSH(1U)
 
 #define S_TP_PC_REV    30
 #define M_TP_PC_REV    0x3
+#define V_TP_PC_REV(x) ((x) << S_TP_PC_REV)
 #define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV)
+
+#define A_TP_BACKOFF0 0x350
+
+#define S_ELEMENT0    0
+#define M_ELEMENT0    0xff
+#define V_ELEMENT0(x) ((x) << S_ELEMENT0)
+#define G_ELEMENT0(x) (((x) >> S_ELEMENT0) & M_ELEMENT0)
+
+#define S_ELEMENT1    8
+#define M_ELEMENT1    0xff
+#define V_ELEMENT1(x) ((x) << S_ELEMENT1)
+#define G_ELEMENT1(x) (((x) >> S_ELEMENT1) & M_ELEMENT1)
+
+#define S_ELEMENT2    16
+#define M_ELEMENT2    0xff
+#define V_ELEMENT2(x) ((x) << S_ELEMENT2)
+#define G_ELEMENT2(x) (((x) >> S_ELEMENT2) & M_ELEMENT2)
+
+#define S_ELEMENT3    24
+#define M_ELEMENT3    0xff
+#define V_ELEMENT3(x) ((x) << S_ELEMENT3)
+#define G_ELEMENT3(x) (((x) >> S_ELEMENT3) & M_ELEMENT3)
+
+#define A_TP_BACKOFF1 0x354
+#define A_TP_BACKOFF2 0x358
+#define A_TP_BACKOFF3 0x35c
+#define A_TP_PARA_REG0 0x360
+
+#define S_VAR_MULT    0
+#define M_VAR_MULT    0xf
+#define V_VAR_MULT(x) ((x) << S_VAR_MULT)
+#define G_VAR_MULT(x) (((x) >> S_VAR_MULT) & M_VAR_MULT)
+
+#define S_VAR_GAIN    4
+#define M_VAR_GAIN    0xf
+#define V_VAR_GAIN(x) ((x) << S_VAR_GAIN)
+#define G_VAR_GAIN(x) (((x) >> S_VAR_GAIN) & M_VAR_GAIN)
+
+#define S_SRTT_GAIN    8
+#define M_SRTT_GAIN    0xf
+#define V_SRTT_GAIN(x) ((x) << S_SRTT_GAIN)
+#define G_SRTT_GAIN(x) (((x) >> S_SRTT_GAIN) & M_SRTT_GAIN)
+
+#define S_RTTVAR_INIT    12
+#define M_RTTVAR_INIT    0xf
+#define V_RTTVAR_INIT(x) ((x) << S_RTTVAR_INIT)
+#define G_RTTVAR_INIT(x) (((x) >> S_RTTVAR_INIT) & M_RTTVAR_INIT)
+
+#define S_DUP_THRESH    20
+#define M_DUP_THRESH    0xf
+#define V_DUP_THRESH(x) ((x) << S_DUP_THRESH)
+#define G_DUP_THRESH(x) (((x) >> S_DUP_THRESH) & M_DUP_THRESH)
+
+#define S_INIT_CONG_WIN    24
+#define M_INIT_CONG_WIN    0x7
+#define V_INIT_CONG_WIN(x) ((x) << S_INIT_CONG_WIN)
+#define G_INIT_CONG_WIN(x) (((x) >> S_INIT_CONG_WIN) & M_INIT_CONG_WIN)
+
+#define A_TP_PARA_REG1 0x364
+
+#define S_INITIAL_SLOW_START_THRESHOLD    0
+#define M_INITIAL_SLOW_START_THRESHOLD    0xffff
+#define V_INITIAL_SLOW_START_THRESHOLD(x) ((x) << S_INITIAL_SLOW_START_THRESHOLD)
+#define G_INITIAL_SLOW_START_THRESHOLD(x) (((x) >> S_INITIAL_SLOW_START_THRESHOLD) & M_INITIAL_SLOW_START_THRESHOLD)
+
+#define S_RECEIVE_BUFFER_SIZE    16
+#define M_RECEIVE_BUFFER_SIZE    0xffff
+#define V_RECEIVE_BUFFER_SIZE(x) ((x) << S_RECEIVE_BUFFER_SIZE)
+#define G_RECEIVE_BUFFER_SIZE(x) (((x) >> S_RECEIVE_BUFFER_SIZE) & M_RECEIVE_BUFFER_SIZE)
+
+#define A_TP_PARA_REG2 0x368
+
+#define S_RX_COALESCE_SIZE    0
+#define M_RX_COALESCE_SIZE    0xffff
+#define V_RX_COALESCE_SIZE(x) ((x) << S_RX_COALESCE_SIZE)
+#define G_RX_COALESCE_SIZE(x) (((x) >> S_RX_COALESCE_SIZE) & M_RX_COALESCE_SIZE)
+
+#define S_MAX_RX_SIZE    16
+#define M_MAX_RX_SIZE    0xffff
+#define V_MAX_RX_SIZE(x) ((x) << S_MAX_RX_SIZE)
+#define G_MAX_RX_SIZE(x) (((x) >> S_MAX_RX_SIZE) & M_MAX_RX_SIZE)
+
+#define A_TP_PARA_REG3 0x36c
+
+#define S_RX_COALESCING_PSH_DELIVER    0
+#define V_RX_COALESCING_PSH_DELIVER(x) ((x) << S_RX_COALESCING_PSH_DELIVER)
+#define F_RX_COALESCING_PSH_DELIVER    V_RX_COALESCING_PSH_DELIVER(1U)
+
+#define S_RX_COALESCING_ENABLE    1
+#define V_RX_COALESCING_ENABLE(x) ((x) << S_RX_COALESCING_ENABLE)
+#define F_RX_COALESCING_ENABLE    V_RX_COALESCING_ENABLE(1U)
+
+#define S_TAHOE_ENABLE    2
+#define V_TAHOE_ENABLE(x) ((x) << S_TAHOE_ENABLE)
+#define F_TAHOE_ENABLE    V_TAHOE_ENABLE(1U)
+
+#define S_MAX_REORDER_FRAGMENTS    12
+#define M_MAX_REORDER_FRAGMENTS    0x7
+#define V_MAX_REORDER_FRAGMENTS(x) ((x) << S_MAX_REORDER_FRAGMENTS)
+#define G_MAX_REORDER_FRAGMENTS(x) (((x) >> S_MAX_REORDER_FRAGMENTS) & M_MAX_REORDER_FRAGMENTS)
+
+#define A_TP_TIMER_RESOLUTION 0x390
+
+#define S_DELAYED_ACK_TIMER_RESOLUTION    0
+#define M_DELAYED_ACK_TIMER_RESOLUTION    0x3f
+#define V_DELAYED_ACK_TIMER_RESOLUTION(x) ((x) << S_DELAYED_ACK_TIMER_RESOLUTION)
+#define G_DELAYED_ACK_TIMER_RESOLUTION(x) (((x) >> S_DELAYED_ACK_TIMER_RESOLUTION) & M_DELAYED_ACK_TIMER_RESOLUTION)
+
+#define S_GENERIC_TIMER_RESOLUTION    16
+#define M_GENERIC_TIMER_RESOLUTION    0x3f
+#define V_GENERIC_TIMER_RESOLUTION(x) ((x) << S_GENERIC_TIMER_RESOLUTION)
+#define G_GENERIC_TIMER_RESOLUTION(x) (((x) >> S_GENERIC_TIMER_RESOLUTION) & M_GENERIC_TIMER_RESOLUTION)
+
+#define A_TP_2MSL 0x394
+
+#define S_2MSL    0
+#define M_2MSL    0x3fffffff
+#define V_2MSL(x) ((x) << S_2MSL)
+#define G_2MSL(x) (((x) >> S_2MSL) & M_2MSL)
+
+#define A_TP_RXT_MIN 0x398
+
+#define S_RETRANSMIT_TIMER_MIN    0
+#define M_RETRANSMIT_TIMER_MIN    0xffff
+#define V_RETRANSMIT_TIMER_MIN(x) ((x) << S_RETRANSMIT_TIMER_MIN)
+#define G_RETRANSMIT_TIMER_MIN(x) (((x) >> S_RETRANSMIT_TIMER_MIN) & M_RETRANSMIT_TIMER_MIN)
+
+#define A_TP_RXT_MAX 0x39c
+
+#define S_RETRANSMIT_TIMER_MAX    0
+#define M_RETRANSMIT_TIMER_MAX    0x3fffffff
+#define V_RETRANSMIT_TIMER_MAX(x) ((x) << S_RETRANSMIT_TIMER_MAX)
+#define G_RETRANSMIT_TIMER_MAX(x) (((x) >> S_RETRANSMIT_TIMER_MAX) & M_RETRANSMIT_TIMER_MAX)
+
+#define A_TP_PERS_MIN 0x3a0
+
+#define S_PERSIST_TIMER_MIN    0
+#define M_PERSIST_TIMER_MIN    0xffff
+#define V_PERSIST_TIMER_MIN(x) ((x) << S_PERSIST_TIMER_MIN)
+#define G_PERSIST_TIMER_MIN(x) (((x) >> S_PERSIST_TIMER_MIN) & M_PERSIST_TIMER_MIN)
+
+#define A_TP_PERS_MAX 0x3a4
+
+#define S_PERSIST_TIMER_MAX    0
+#define M_PERSIST_TIMER_MAX    0x3fffffff
+#define V_PERSIST_TIMER_MAX(x) ((x) << S_PERSIST_TIMER_MAX)
+#define G_PERSIST_TIMER_MAX(x) (((x) >> S_PERSIST_TIMER_MAX) & M_PERSIST_TIMER_MAX)
+
+#define A_TP_KEEP_IDLE 0x3ac
+
+#define S_KEEP_ALIVE_IDLE_TIME    0
+#define M_KEEP_ALIVE_IDLE_TIME    0x3fffffff
+#define V_KEEP_ALIVE_IDLE_TIME(x) ((x) << S_KEEP_ALIVE_IDLE_TIME)
+#define G_KEEP_ALIVE_IDLE_TIME(x) (((x) >> S_KEEP_ALIVE_IDLE_TIME) & M_KEEP_ALIVE_IDLE_TIME)
+
+#define A_TP_KEEP_INTVL 0x3b0
+
+#define S_KEEP_ALIVE_INTERVAL_TIME    0
+#define M_KEEP_ALIVE_INTERVAL_TIME    0x3fffffff
+#define V_KEEP_ALIVE_INTERVAL_TIME(x) ((x) << S_KEEP_ALIVE_INTERVAL_TIME)
+#define G_KEEP_ALIVE_INTERVAL_TIME(x) (((x) >> S_KEEP_ALIVE_INTERVAL_TIME) & M_KEEP_ALIVE_INTERVAL_TIME)
+
+#define A_TP_INIT_SRTT 0x3b4
+
+#define S_INITIAL_SRTT    0
+#define M_INITIAL_SRTT    0xffff
+#define V_INITIAL_SRTT(x) ((x) << S_INITIAL_SRTT)
+#define G_INITIAL_SRTT(x) (((x) >> S_INITIAL_SRTT) & M_INITIAL_SRTT)
+
+#define A_TP_DACK_TIME 0x3b8
+
+#define S_DELAYED_ACK_TIME    0
+#define M_DELAYED_ACK_TIME    0x7ff
+#define V_DELAYED_ACK_TIME(x) ((x) << S_DELAYED_ACK_TIME)
+#define G_DELAYED_ACK_TIME(x) (((x) >> S_DELAYED_ACK_TIME) & M_DELAYED_ACK_TIME)
+
+#define A_TP_FINWAIT2_TIME 0x3bc
+
+#define S_FINWAIT2_TIME    0
+#define M_FINWAIT2_TIME    0x3fffffff
+#define V_FINWAIT2_TIME(x) ((x) << S_FINWAIT2_TIME)
+#define G_FINWAIT2_TIME(x) (((x) >> S_FINWAIT2_TIME) & M_FINWAIT2_TIME)
+
+#define A_TP_FAST_FINWAIT2_TIME 0x3c0
+
+#define S_FAST_FINWAIT2_TIME    0
+#define M_FAST_FINWAIT2_TIME    0x3fffffff
+#define V_FAST_FINWAIT2_TIME(x) ((x) << S_FAST_FINWAIT2_TIME)
+#define G_FAST_FINWAIT2_TIME(x) (((x) >> S_FAST_FINWAIT2_TIME) & M_FAST_FINWAIT2_TIME)
+
+#define A_TP_SHIFT_CNT 0x3c4
+
+#define S_KEEPALIVE_MAX    0
+#define M_KEEPALIVE_MAX    0xff
+#define V_KEEPALIVE_MAX(x) ((x) << S_KEEPALIVE_MAX)
+#define G_KEEPALIVE_MAX(x) (((x) >> S_KEEPALIVE_MAX) & M_KEEPALIVE_MAX)
+
+#define S_WINDOWPROBE_MAX    8
+#define M_WINDOWPROBE_MAX    0xff
+#define V_WINDOWPROBE_MAX(x) ((x) << S_WINDOWPROBE_MAX)
+#define G_WINDOWPROBE_MAX(x) (((x) >> S_WINDOWPROBE_MAX) & M_WINDOWPROBE_MAX)
+
+#define S_RETRANSMISSION_MAX    16
+#define M_RETRANSMISSION_MAX    0xff
+#define V_RETRANSMISSION_MAX(x) ((x) << S_RETRANSMISSION_MAX)
+#define G_RETRANSMISSION_MAX(x) (((x) >> S_RETRANSMISSION_MAX) & M_RETRANSMISSION_MAX)
+
+#define S_SYN_MAX    24
+#define M_SYN_MAX    0xff
+#define V_SYN_MAX(x) ((x) << S_SYN_MAX)
+#define G_SYN_MAX(x) (((x) >> S_SYN_MAX) & M_SYN_MAX)
+
+#define A_TP_QOS_REG0 0x3e0
+
+#define S_L3_VALUE    0
+#define M_L3_VALUE    0x3f
+#define V_L3_VALUE(x) ((x) << S_L3_VALUE)
+#define G_L3_VALUE(x) (((x) >> S_L3_VALUE) & M_L3_VALUE)
+
+#define A_TP_QOS_REG1 0x3e4
+#define A_TP_QOS_REG2 0x3e8
+#define A_TP_QOS_REG3 0x3ec
+#define A_TP_QOS_REG4 0x3f0
+#define A_TP_QOS_REG5 0x3f4
+#define A_TP_QOS_REG6 0x3f8
+#define A_TP_QOS_REG7 0x3fc
+#define A_TP_MTU_REG0 0x404
+#define A_TP_MTU_REG1 0x408
+#define A_TP_MTU_REG2 0x40c
+#define A_TP_MTU_REG3 0x410
+#define A_TP_MTU_REG4 0x414
+#define A_TP_MTU_REG5 0x418
+#define A_TP_MTU_REG6 0x41c
+#define A_TP_MTU_REG7 0x420
 #define A_TP_RESET 0x44c
+
 #define S_TP_RESET    0
 #define V_TP_RESET(x) ((x) << S_TP_RESET)
 #define F_TP_RESET    V_TP_RESET(1U)
 
+#define S_CM_MEMMGR_INIT    1
+#define V_CM_MEMMGR_INIT(x) ((x) << S_CM_MEMMGR_INIT)
+#define F_CM_MEMMGR_INIT    V_CM_MEMMGR_INIT(1U)
+
+#define A_TP_MIB_INDEX 0x450
+#define A_TP_MIB_DATA 0x454
+#define A_TP_SYNC_TIME_HI 0x458
+#define A_TP_SYNC_TIME_LO 0x45c
+#define A_TP_CM_MM_RX_FLST_BASE 0x460
+
+#define S_CM_MEMMGR_RX_FREE_LIST_BASE    0
+#define M_CM_MEMMGR_RX_FREE_LIST_BASE    0xfffffff
+#define V_CM_MEMMGR_RX_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_RX_FREE_LIST_BASE)
+#define G_CM_MEMMGR_RX_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_RX_FREE_LIST_BASE) & M_CM_MEMMGR_RX_FREE_LIST_BASE)
+
+#define A_TP_CM_MM_TX_FLST_BASE 0x464
+
+#define S_CM_MEMMGR_TX_FREE_LIST_BASE    0
+#define M_CM_MEMMGR_TX_FREE_LIST_BASE    0xfffffff
+#define V_CM_MEMMGR_TX_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_TX_FREE_LIST_BASE)
+#define G_CM_MEMMGR_TX_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_TX_FREE_LIST_BASE) & M_CM_MEMMGR_TX_FREE_LIST_BASE)
+
+#define A_TP_CM_MM_P_FLST_BASE 0x468
+
+#define S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE    0
+#define M_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE    0xfffffff
+#define V_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE(x) ((x) << S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE)
+#define G_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE(x) (((x) >> S_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE) & M_CM_MEMMGR_PSTRUCT_FREE_LIST_BASE)
+
+#define A_TP_CM_MM_MAX_P 0x46c
+
+#define S_CM_MEMMGR_MAX_PSTRUCT    0
+#define M_CM_MEMMGR_MAX_PSTRUCT    0xfffffff
+#define V_CM_MEMMGR_MAX_PSTRUCT(x) ((x) << S_CM_MEMMGR_MAX_PSTRUCT)
+#define G_CM_MEMMGR_MAX_PSTRUCT(x) (((x) >> S_CM_MEMMGR_MAX_PSTRUCT) & M_CM_MEMMGR_MAX_PSTRUCT)
+
 #define A_TP_INT_ENABLE 0x470
+
+#define S_TX_FREE_LIST_EMPTY    0
+#define V_TX_FREE_LIST_EMPTY(x) ((x) << S_TX_FREE_LIST_EMPTY)
+#define F_TX_FREE_LIST_EMPTY    V_TX_FREE_LIST_EMPTY(1U)
+
+#define S_RX_FREE_LIST_EMPTY    1
+#define V_RX_FREE_LIST_EMPTY(x) ((x) << S_RX_FREE_LIST_EMPTY)
+#define F_RX_FREE_LIST_EMPTY    V_RX_FREE_LIST_EMPTY(1U)
+
 #define A_TP_INT_CAUSE 0x474
+#define A_TP_TIMER_SEPARATOR 0x4a4
+
+#define S_DISABLE_PAST_TIMER_INSERTION    0
+#define V_DISABLE_PAST_TIMER_INSERTION(x) ((x) << S_DISABLE_PAST_TIMER_INSERTION)
+#define F_DISABLE_PAST_TIMER_INSERTION    V_DISABLE_PAST_TIMER_INSERTION(1U)
+
+#define S_MODULATION_TIMER_SEPARATOR    1
+#define M_MODULATION_TIMER_SEPARATOR    0x7fff
+#define V_MODULATION_TIMER_SEPARATOR(x) ((x) << S_MODULATION_TIMER_SEPARATOR)
+#define G_MODULATION_TIMER_SEPARATOR(x) (((x) >> S_MODULATION_TIMER_SEPARATOR) & M_MODULATION_TIMER_SEPARATOR)
+
+#define S_GLOBAL_TIMER_SEPARATOR    16
+#define M_GLOBAL_TIMER_SEPARATOR    0xffff
+#define V_GLOBAL_TIMER_SEPARATOR(x) ((x) << S_GLOBAL_TIMER_SEPARATOR)
+#define G_GLOBAL_TIMER_SEPARATOR(x) (((x) >> S_GLOBAL_TIMER_SEPARATOR) & M_GLOBAL_TIMER_SEPARATOR)
+
+#define A_TP_CM_FC_MODE 0x4b0
+#define A_TP_PC_CONGESTION_CNTL 0x4b4
 #define A_TP_TX_DROP_CONFIG 0x4b8
 
 #define S_ENABLE_TX_DROP    31
@@ -282,12 +1249,108 @@
 #define F_ENABLE_TX_ERROR    V_ENABLE_TX_ERROR(1U)
 
 #define S_DROP_TICKS_CNT    4
+#define M_DROP_TICKS_CNT    0x3ffffff
 #define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT)
+#define G_DROP_TICKS_CNT(x) (((x) >> S_DROP_TICKS_CNT) & M_DROP_TICKS_CNT)
 
 #define S_NUM_PKTS_DROPPED    0
+#define M_NUM_PKTS_DROPPED    0xf
 #define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED)
+#define G_NUM_PKTS_DROPPED(x) (((x) >> S_NUM_PKTS_DROPPED) & M_NUM_PKTS_DROPPED)
+
+#define A_TP_TX_DROP_COUNT 0x4bc
+
+/* RAT registers */
+#define A_RAT_ROUTE_CONTROL 0x580
+
+#define S_USE_ROUTE_TABLE    0
+#define V_USE_ROUTE_TABLE(x) ((x) << S_USE_ROUTE_TABLE)
+#define F_USE_ROUTE_TABLE    V_USE_ROUTE_TABLE(1U)
+
+#define S_ENABLE_CSPI    1
+#define V_ENABLE_CSPI(x) ((x) << S_ENABLE_CSPI)
+#define F_ENABLE_CSPI    V_ENABLE_CSPI(1U)
+
+#define S_ENABLE_PCIX    2
+#define V_ENABLE_PCIX(x) ((x) << S_ENABLE_PCIX)
+#define F_ENABLE_PCIX    V_ENABLE_PCIX(1U)
+
+#define A_RAT_ROUTE_TABLE_INDEX 0x584
+
+#define S_ROUTE_TABLE_INDEX    0
+#define M_ROUTE_TABLE_INDEX    0xf
+#define V_ROUTE_TABLE_INDEX(x) ((x) << S_ROUTE_TABLE_INDEX)
+#define G_ROUTE_TABLE_INDEX(x) (((x) >> S_ROUTE_TABLE_INDEX) & M_ROUTE_TABLE_INDEX)
+
+#define A_RAT_ROUTE_TABLE_DATA 0x588
+#define A_RAT_NO_ROUTE 0x58c
+
+#define S_CPL_OPCODE    0
+#define M_CPL_OPCODE    0xff
+#define V_CPL_OPCODE(x) ((x) << S_CPL_OPCODE)
+#define G_CPL_OPCODE(x) (((x) >> S_CPL_OPCODE) & M_CPL_OPCODE)
+
+#define A_RAT_INTR_ENABLE 0x590
+
+#define S_ZEROROUTEERROR    0
+#define V_ZEROROUTEERROR(x) ((x) << S_ZEROROUTEERROR)
+#define F_ZEROROUTEERROR    V_ZEROROUTEERROR(1U)
+
+#define S_CSPIFRAMINGERROR    1
+#define V_CSPIFRAMINGERROR(x) ((x) << S_CSPIFRAMINGERROR)
+#define F_CSPIFRAMINGERROR    V_CSPIFRAMINGERROR(1U)
+
+#define S_SGEFRAMINGERROR    2
+#define V_SGEFRAMINGERROR(x) ((x) << S_SGEFRAMINGERROR)
+#define F_SGEFRAMINGERROR    V_SGEFRAMINGERROR(1U)
+
+#define S_TPFRAMINGERROR    3
+#define V_TPFRAMINGERROR(x) ((x) << S_TPFRAMINGERROR)
+#define F_TPFRAMINGERROR    V_TPFRAMINGERROR(1U)
+
+#define A_RAT_INTR_CAUSE 0x594
 
 /* CSPI registers */
+#define A_CSPI_RX_AE_WM 0x810
+#define A_CSPI_RX_AF_WM 0x814
+#define A_CSPI_CALENDAR_LEN 0x818
+
+#define S_CALENDARLENGTH    0
+#define M_CALENDARLENGTH    0xffff
+#define V_CALENDARLENGTH(x) ((x) << S_CALENDARLENGTH)
+#define G_CALENDARLENGTH(x) (((x) >> S_CALENDARLENGTH) & M_CALENDARLENGTH)
+
+#define A_CSPI_FIFO_STATUS_ENABLE 0x820
+
+#define S_FIFOSTATUSENABLE    0
+#define V_FIFOSTATUSENABLE(x) ((x) << S_FIFOSTATUSENABLE)
+#define F_FIFOSTATUSENABLE    V_FIFOSTATUSENABLE(1U)
+
+#define A_CSPI_MAXBURST1_MAXBURST2 0x828
+
+#define S_MAXBURST1    0
+#define M_MAXBURST1    0xffff
+#define V_MAXBURST1(x) ((x) << S_MAXBURST1)
+#define G_MAXBURST1(x) (((x) >> S_MAXBURST1) & M_MAXBURST1)
+
+#define S_MAXBURST2    16
+#define M_MAXBURST2    0xffff
+#define V_MAXBURST2(x) ((x) << S_MAXBURST2)
+#define G_MAXBURST2(x) (((x) >> S_MAXBURST2) & M_MAXBURST2)
+
+#define A_CSPI_TRAIN 0x82c
+
+#define S_CSPI_TRAIN_ALPHA    0
+#define M_CSPI_TRAIN_ALPHA    0xffff
+#define V_CSPI_TRAIN_ALPHA(x) ((x) << S_CSPI_TRAIN_ALPHA)
+#define G_CSPI_TRAIN_ALPHA(x) (((x) >> S_CSPI_TRAIN_ALPHA) & M_CSPI_TRAIN_ALPHA)
+
+#define S_CSPI_TRAIN_DATA_MAXT    16
+#define M_CSPI_TRAIN_DATA_MAXT    0xffff
+#define V_CSPI_TRAIN_DATA_MAXT(x) ((x) << S_CSPI_TRAIN_DATA_MAXT)
+#define G_CSPI_TRAIN_DATA_MAXT(x) (((x) >> S_CSPI_TRAIN_DATA_MAXT) & M_CSPI_TRAIN_DATA_MAXT)
+
+#define A_CSPI_INTR_STATUS 0x848
 
 #define S_DIP4ERR    0
 #define V_DIP4ERR(x) ((x) << S_DIP4ERR)
@@ -309,22 +1372,63 @@
 #define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR)
 #define F_RAMPARITYERR    V_RAMPARITYERR(1U)
 
-/* ESPI registers */
+#define A_CSPI_INTR_ENABLE 0x84c
 
+/* ESPI registers */
 #define A_ESPI_SCH_TOKEN0 0x880
+
+#define S_SCHTOKEN0    0
+#define M_SCHTOKEN0    0xffff
+#define V_SCHTOKEN0(x) ((x) << S_SCHTOKEN0)
+#define G_SCHTOKEN0(x) (((x) >> S_SCHTOKEN0) & M_SCHTOKEN0)
+
 #define A_ESPI_SCH_TOKEN1 0x884
+
+#define S_SCHTOKEN1    0
+#define M_SCHTOKEN1    0xffff
+#define V_SCHTOKEN1(x) ((x) << S_SCHTOKEN1)
+#define G_SCHTOKEN1(x) (((x) >> S_SCHTOKEN1) & M_SCHTOKEN1)
+
 #define A_ESPI_SCH_TOKEN2 0x888
+
+#define S_SCHTOKEN2    0
+#define M_SCHTOKEN2    0xffff
+#define V_SCHTOKEN2(x) ((x) << S_SCHTOKEN2)
+#define G_SCHTOKEN2(x) (((x) >> S_SCHTOKEN2) & M_SCHTOKEN2)
+
 #define A_ESPI_SCH_TOKEN3 0x88c
+
+#define S_SCHTOKEN3    0
+#define M_SCHTOKEN3    0xffff
+#define V_SCHTOKEN3(x) ((x) << S_SCHTOKEN3)
+#define G_SCHTOKEN3(x) (((x) >> S_SCHTOKEN3) & M_SCHTOKEN3)
+
 #define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890
+
+#define S_ALMOSTEMPTY    0
+#define M_ALMOSTEMPTY    0xffff
+#define V_ALMOSTEMPTY(x) ((x) << S_ALMOSTEMPTY)
+#define G_ALMOSTEMPTY(x) (((x) >> S_ALMOSTEMPTY) & M_ALMOSTEMPTY)
+
 #define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894
+
+#define S_ALMOSTFULL    0
+#define M_ALMOSTFULL    0xffff
+#define V_ALMOSTFULL(x) ((x) << S_ALMOSTFULL)
+#define G_ALMOSTFULL(x) (((x) >> S_ALMOSTFULL) & M_ALMOSTFULL)
+
 #define A_ESPI_CALENDAR_LENGTH 0x898
 #define A_PORT_CONFIG 0x89c
 
 #define S_RX_NPORTS    0
+#define M_RX_NPORTS    0xff
 #define V_RX_NPORTS(x) ((x) << S_RX_NPORTS)
+#define G_RX_NPORTS(x) (((x) >> S_RX_NPORTS) & M_RX_NPORTS)
 
 #define S_TX_NPORTS    8
+#define M_TX_NPORTS    0xff
 #define V_TX_NPORTS(x) ((x) << S_TX_NPORTS)
+#define G_TX_NPORTS(x) (((x) >> S_TX_NPORTS) & M_TX_NPORTS)
 
 #define A_ESPI_FIFO_STATUS_ENABLE 0x8a0
 
@@ -332,12 +1436,124 @@
 #define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE)
 #define F_RXSTATUSENABLE    V_RXSTATUSENABLE(1U)
 
+#define S_TXDROPENABLE    1
+#define V_TXDROPENABLE(x) ((x) << S_TXDROPENABLE)
+#define F_TXDROPENABLE    V_TXDROPENABLE(1U)
+
+#define S_RXENDIANMODE    2
+#define V_RXENDIANMODE(x) ((x) << S_RXENDIANMODE)
+#define F_RXENDIANMODE    V_RXENDIANMODE(1U)
+
+#define S_TXENDIANMODE    3
+#define V_TXENDIANMODE(x) ((x) << S_TXENDIANMODE)
+#define F_TXENDIANMODE    V_TXENDIANMODE(1U)
+
 #define S_INTEL1010MODE    4
 #define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE)
 #define F_INTEL1010MODE    V_INTEL1010MODE(1U)
 
 #define A_ESPI_MAXBURST1_MAXBURST2 0x8a8
 #define A_ESPI_TRAIN 0x8ac
+
+#define S_MAXTRAINALPHA    0
+#define M_MAXTRAINALPHA    0xffff
+#define V_MAXTRAINALPHA(x) ((x) << S_MAXTRAINALPHA)
+#define G_MAXTRAINALPHA(x) (((x) >> S_MAXTRAINALPHA) & M_MAXTRAINALPHA)
+
+#define S_MAXTRAINDATA    16
+#define M_MAXTRAINDATA    0xffff
+#define V_MAXTRAINDATA(x) ((x) << S_MAXTRAINDATA)
+#define G_MAXTRAINDATA(x) (((x) >> S_MAXTRAINDATA) & M_MAXTRAINDATA)
+
+#define A_RAM_STATUS 0x8b0
+
+#define S_RXFIFOPARITYERROR    0
+#define M_RXFIFOPARITYERROR    0x3ff
+#define V_RXFIFOPARITYERROR(x) ((x) << S_RXFIFOPARITYERROR)
+#define G_RXFIFOPARITYERROR(x) (((x) >> S_RXFIFOPARITYERROR) & M_RXFIFOPARITYERROR)
+
+#define S_TXFIFOPARITYERROR    10
+#define M_TXFIFOPARITYERROR    0x3ff
+#define V_TXFIFOPARITYERROR(x) ((x) << S_TXFIFOPARITYERROR)
+#define G_TXFIFOPARITYERROR(x) (((x) >> S_TXFIFOPARITYERROR) & M_TXFIFOPARITYERROR)
+
+#define S_RXFIFOOVERFLOW    20
+#define M_RXFIFOOVERFLOW    0x3ff
+#define V_RXFIFOOVERFLOW(x) ((x) << S_RXFIFOOVERFLOW)
+#define G_RXFIFOOVERFLOW(x) (((x) >> S_RXFIFOOVERFLOW) & M_RXFIFOOVERFLOW)
+
+#define A_TX_DROP_COUNT0 0x8b4
+
+#define S_TXPORT0DROPCNT    0
+#define M_TXPORT0DROPCNT    0xffff
+#define V_TXPORT0DROPCNT(x) ((x) << S_TXPORT0DROPCNT)
+#define G_TXPORT0DROPCNT(x) (((x) >> S_TXPORT0DROPCNT) & M_TXPORT0DROPCNT)
+
+#define S_TXPORT1DROPCNT    16
+#define M_TXPORT1DROPCNT    0xffff
+#define V_TXPORT1DROPCNT(x) ((x) << S_TXPORT1DROPCNT)
+#define G_TXPORT1DROPCNT(x) (((x) >> S_TXPORT1DROPCNT) & M_TXPORT1DROPCNT)
+
+#define A_TX_DROP_COUNT1 0x8b8
+
+#define S_TXPORT2DROPCNT    0
+#define M_TXPORT2DROPCNT    0xffff
+#define V_TXPORT2DROPCNT(x) ((x) << S_TXPORT2DROPCNT)
+#define G_TXPORT2DROPCNT(x) (((x) >> S_TXPORT2DROPCNT) & M_TXPORT2DROPCNT)
+
+#define S_TXPORT3DROPCNT    16
+#define M_TXPORT3DROPCNT    0xffff
+#define V_TXPORT3DROPCNT(x) ((x) << S_TXPORT3DROPCNT)
+#define G_TXPORT3DROPCNT(x) (((x) >> S_TXPORT3DROPCNT) & M_TXPORT3DROPCNT)
+
+#define A_RX_DROP_COUNT0 0x8bc
+
+#define S_RXPORT0DROPCNT    0
+#define M_RXPORT0DROPCNT    0xffff
+#define V_RXPORT0DROPCNT(x) ((x) << S_RXPORT0DROPCNT)
+#define G_RXPORT0DROPCNT(x) (((x) >> S_RXPORT0DROPCNT) & M_RXPORT0DROPCNT)
+
+#define S_RXPORT1DROPCNT    16
+#define M_RXPORT1DROPCNT    0xffff
+#define V_RXPORT1DROPCNT(x) ((x) << S_RXPORT1DROPCNT)
+#define G_RXPORT1DROPCNT(x) (((x) >> S_RXPORT1DROPCNT) & M_RXPORT1DROPCNT)
+
+#define A_RX_DROP_COUNT1 0x8c0
+
+#define S_RXPORT2DROPCNT    0
+#define M_RXPORT2DROPCNT    0xffff
+#define V_RXPORT2DROPCNT(x) ((x) << S_RXPORT2DROPCNT)
+#define G_RXPORT2DROPCNT(x) (((x) >> S_RXPORT2DROPCNT) & M_RXPORT2DROPCNT)
+
+#define S_RXPORT3DROPCNT    16
+#define M_RXPORT3DROPCNT    0xffff
+#define V_RXPORT3DROPCNT(x) ((x) << S_RXPORT3DROPCNT)
+#define G_RXPORT3DROPCNT(x) (((x) >> S_RXPORT3DROPCNT) & M_RXPORT3DROPCNT)
+
+#define A_DIP4_ERROR_COUNT 0x8c4
+
+#define S_DIP4ERRORCNT    0
+#define M_DIP4ERRORCNT    0xfff
+#define V_DIP4ERRORCNT(x) ((x) << S_DIP4ERRORCNT)
+#define G_DIP4ERRORCNT(x) (((x) >> S_DIP4ERRORCNT) & M_DIP4ERRORCNT)
+
+#define S_DIP4ERRORCNTSHADOW    12
+#define M_DIP4ERRORCNTSHADOW    0xfff
+#define V_DIP4ERRORCNTSHADOW(x) ((x) << S_DIP4ERRORCNTSHADOW)
+#define G_DIP4ERRORCNTSHADOW(x) (((x) >> S_DIP4ERRORCNTSHADOW) & M_DIP4ERRORCNTSHADOW)
+
+#define S_TRICN_RX_TRAIN_ERR    24
+#define V_TRICN_RX_TRAIN_ERR(x) ((x) << S_TRICN_RX_TRAIN_ERR)
+#define F_TRICN_RX_TRAIN_ERR    V_TRICN_RX_TRAIN_ERR(1U)
+
+#define S_TRICN_RX_TRAINING    25
+#define V_TRICN_RX_TRAINING(x) ((x) << S_TRICN_RX_TRAINING)
+#define F_TRICN_RX_TRAINING    V_TRICN_RX_TRAINING(1U)
+
+#define S_TRICN_RX_TRAIN_OK    26
+#define V_TRICN_RX_TRAIN_OK(x) ((x) << S_TRICN_RX_TRAIN_OK)
+#define F_TRICN_RX_TRAIN_OK    V_TRICN_RX_TRAIN_OK(1U)
+
 #define A_ESPI_INTR_STATUS 0x8c8
 
 #define S_DIP2PARITYERR    5
@@ -347,19 +1563,56 @@
 #define A_ESPI_INTR_ENABLE 0x8cc
 #define A_RX_DROP_THRESHOLD 0x8d0
 #define A_ESPI_RX_RESET 0x8ec
+
+#define S_ESPI_RX_LNK_RST    0
+#define V_ESPI_RX_LNK_RST(x) ((x) << S_ESPI_RX_LNK_RST)
+#define F_ESPI_RX_LNK_RST    V_ESPI_RX_LNK_RST(1U)
+
+#define S_ESPI_RX_CORE_RST    1
+#define V_ESPI_RX_CORE_RST(x) ((x) << S_ESPI_RX_CORE_RST)
+#define F_ESPI_RX_CORE_RST    V_ESPI_RX_CORE_RST(1U)
+
+#define S_RX_CLK_STATUS    2
+#define V_RX_CLK_STATUS(x) ((x) << S_RX_CLK_STATUS)
+#define F_RX_CLK_STATUS    V_RX_CLK_STATUS(1U)
+
 #define A_ESPI_MISC_CONTROL 0x8f0
 
 #define S_OUT_OF_SYNC_COUNT    0
+#define M_OUT_OF_SYNC_COUNT    0xf
 #define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT)
+#define G_OUT_OF_SYNC_COUNT(x) (((x) >> S_OUT_OF_SYNC_COUNT) & M_OUT_OF_SYNC_COUNT)
+
+#define S_DIP2_COUNT_MODE_ENABLE    4
+#define V_DIP2_COUNT_MODE_ENABLE(x) ((x) << S_DIP2_COUNT_MODE_ENABLE)
+#define F_DIP2_COUNT_MODE_ENABLE    V_DIP2_COUNT_MODE_ENABLE(1U)
 
 #define S_DIP2_PARITY_ERR_THRES    5
+#define M_DIP2_PARITY_ERR_THRES    0xf
 #define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES)
+#define G_DIP2_PARITY_ERR_THRES(x) (((x) >> S_DIP2_PARITY_ERR_THRES) & M_DIP2_PARITY_ERR_THRES)
 
 #define S_DIP4_THRES    9
+#define M_DIP4_THRES    0xfff
 #define V_DIP4_THRES(x) ((x) << S_DIP4_THRES)
+#define G_DIP4_THRES(x) (((x) >> S_DIP4_THRES) & M_DIP4_THRES)
+
+#define S_DIP4_THRES_ENABLE    21
+#define V_DIP4_THRES_ENABLE(x) ((x) << S_DIP4_THRES_ENABLE)
+#define F_DIP4_THRES_ENABLE    V_DIP4_THRES_ENABLE(1U)
+
+#define S_FORCE_DISABLE_STATUS    22
+#define V_FORCE_DISABLE_STATUS(x) ((x) << S_FORCE_DISABLE_STATUS)
+#define F_FORCE_DISABLE_STATUS    V_FORCE_DISABLE_STATUS(1U)
+
+#define S_DYNAMIC_DESKEW    23
+#define V_DYNAMIC_DESKEW(x) ((x) << S_DYNAMIC_DESKEW)
+#define F_DYNAMIC_DESKEW    V_DYNAMIC_DESKEW(1U)
 
 #define S_MONITORED_PORT_NUM    25
+#define M_MONITORED_PORT_NUM    0x3
 #define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM)
+#define G_MONITORED_PORT_NUM(x) (((x) >> S_MONITORED_PORT_NUM) & M_MONITORED_PORT_NUM)
 
 #define S_MONITORED_DIRECTION    27
 #define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION)
@@ -370,33 +1623,125 @@
 #define F_MONITORED_INTERFACE    V_MONITORED_INTERFACE(1U)
 
 #define A_ESPI_DIP2_ERR_COUNT 0x8f4
+
+#define S_DIP2_ERR_CNT    0
+#define M_DIP2_ERR_CNT    0xf
+#define V_DIP2_ERR_CNT(x) ((x) << S_DIP2_ERR_CNT)
+#define G_DIP2_ERR_CNT(x) (((x) >> S_DIP2_ERR_CNT) & M_DIP2_ERR_CNT)
+
 #define A_ESPI_CMD_ADDR 0x8f8
 
 #define S_WRITE_DATA    0
+#define M_WRITE_DATA    0xff
 #define V_WRITE_DATA(x) ((x) << S_WRITE_DATA)
+#define G_WRITE_DATA(x) (((x) >> S_WRITE_DATA) & M_WRITE_DATA)
 
 #define S_REGISTER_OFFSET    8
+#define M_REGISTER_OFFSET    0xf
 #define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET)
+#define G_REGISTER_OFFSET(x) (((x) >> S_REGISTER_OFFSET) & M_REGISTER_OFFSET)
 
 #define S_CHANNEL_ADDR    12
+#define M_CHANNEL_ADDR    0xf
 #define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR)
+#define G_CHANNEL_ADDR(x) (((x) >> S_CHANNEL_ADDR) & M_CHANNEL_ADDR)
 
 #define S_MODULE_ADDR    16
+#define M_MODULE_ADDR    0x3
 #define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR)
+#define G_MODULE_ADDR(x) (((x) >> S_MODULE_ADDR) & M_MODULE_ADDR)
 
 #define S_BUNDLE_ADDR    20
+#define M_BUNDLE_ADDR    0x3
 #define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR)
+#define G_BUNDLE_ADDR(x) (((x) >> S_BUNDLE_ADDR) & M_BUNDLE_ADDR)
 
 #define S_SPI4_COMMAND    24
+#define M_SPI4_COMMAND    0xff
 #define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND)
+#define G_SPI4_COMMAND(x) (((x) >> S_SPI4_COMMAND) & M_SPI4_COMMAND)
 
 #define A_ESPI_GOSTAT 0x8fc
+
+#define S_READ_DATA    0
+#define M_READ_DATA    0xff
+#define V_READ_DATA(x) ((x) << S_READ_DATA)
+#define G_READ_DATA(x) (((x) >> S_READ_DATA) & M_READ_DATA)
+
 #define S_ESPI_CMD_BUSY    8
 #define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY)
 #define F_ESPI_CMD_BUSY    V_ESPI_CMD_BUSY(1U)
 
-/* PL registers */
+#define S_ERROR_ACK    9
+#define V_ERROR_ACK(x) ((x) << S_ERROR_ACK)
+#define F_ERROR_ACK    V_ERROR_ACK(1U)
+
+#define S_UNMAPPED_ERR    10
+#define V_UNMAPPED_ERR(x) ((x) << S_UNMAPPED_ERR)
+#define F_UNMAPPED_ERR    V_UNMAPPED_ERR(1U)
+
+#define S_TRANSACTION_TIMER    16
+#define M_TRANSACTION_TIMER    0xff
+#define V_TRANSACTION_TIMER(x) ((x) << S_TRANSACTION_TIMER)
+#define G_TRANSACTION_TIMER(x) (((x) >> S_TRANSACTION_TIMER) & M_TRANSACTION_TIMER)
+
+
+/* ULP registers */
+#define A_ULP_ULIMIT 0x980
+#define A_ULP_TAGMASK 0x984
+#define A_ULP_HREG_INDEX 0x988
+#define A_ULP_HREG_DATA 0x98c
+#define A_ULP_INT_ENABLE 0x990
+#define A_ULP_INT_CAUSE 0x994
 
+#define S_HREG_PAR_ERR    0
+#define V_HREG_PAR_ERR(x) ((x) << S_HREG_PAR_ERR)
+#define F_HREG_PAR_ERR    V_HREG_PAR_ERR(1U)
+
+#define S_EGRS_DATA_PAR_ERR    1
+#define V_EGRS_DATA_PAR_ERR(x) ((x) << S_EGRS_DATA_PAR_ERR)
+#define F_EGRS_DATA_PAR_ERR    V_EGRS_DATA_PAR_ERR(1U)
+
+#define S_INGRS_DATA_PAR_ERR    2
+#define V_INGRS_DATA_PAR_ERR(x) ((x) << S_INGRS_DATA_PAR_ERR)
+#define F_INGRS_DATA_PAR_ERR    V_INGRS_DATA_PAR_ERR(1U)
+
+#define S_PM_INTR    3
+#define V_PM_INTR(x) ((x) << S_PM_INTR)
+#define F_PM_INTR    V_PM_INTR(1U)
+
+#define S_PM_E2C_SYNC_ERR    4
+#define V_PM_E2C_SYNC_ERR(x) ((x) << S_PM_E2C_SYNC_ERR)
+#define F_PM_E2C_SYNC_ERR    V_PM_E2C_SYNC_ERR(1U)
+
+#define S_PM_C2E_SYNC_ERR    5
+#define V_PM_C2E_SYNC_ERR(x) ((x) << S_PM_C2E_SYNC_ERR)
+#define F_PM_C2E_SYNC_ERR    V_PM_C2E_SYNC_ERR(1U)
+
+#define S_PM_E2C_EMPTY_ERR    6
+#define V_PM_E2C_EMPTY_ERR(x) ((x) << S_PM_E2C_EMPTY_ERR)
+#define F_PM_E2C_EMPTY_ERR    V_PM_E2C_EMPTY_ERR(1U)
+
+#define S_PM_C2E_EMPTY_ERR    7
+#define V_PM_C2E_EMPTY_ERR(x) ((x) << S_PM_C2E_EMPTY_ERR)
+#define F_PM_C2E_EMPTY_ERR    V_PM_C2E_EMPTY_ERR(1U)
+
+#define S_PM_PAR_ERR    8
+#define M_PM_PAR_ERR    0xffff
+#define V_PM_PAR_ERR(x) ((x) << S_PM_PAR_ERR)
+#define G_PM_PAR_ERR(x) (((x) >> S_PM_PAR_ERR) & M_PM_PAR_ERR)
+
+#define S_PM_E2C_WRT_FULL    24
+#define V_PM_E2C_WRT_FULL(x) ((x) << S_PM_E2C_WRT_FULL)
+#define F_PM_E2C_WRT_FULL    V_PM_E2C_WRT_FULL(1U)
+
+#define S_PM_C2E_WRT_FULL    25
+#define V_PM_C2E_WRT_FULL(x) ((x) << S_PM_C2E_WRT_FULL)
+#define F_PM_C2E_WRT_FULL    V_PM_C2E_WRT_FULL(1U)
+
+#define A_ULP_PIO_CTRL 0x998
+
+/* PL registers */
 #define A_PL_ENABLE 0xa00
 
 #define S_PL_INTR_SGE_ERR    0
@@ -407,14 +1752,38 @@
 #define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA)
 #define F_PL_INTR_SGE_DATA    V_PL_INTR_SGE_DATA(1U)
 
+#define S_PL_INTR_MC3    2
+#define V_PL_INTR_MC3(x) ((x) << S_PL_INTR_MC3)
+#define F_PL_INTR_MC3    V_PL_INTR_MC3(1U)
+
+#define S_PL_INTR_MC4    3
+#define V_PL_INTR_MC4(x) ((x) << S_PL_INTR_MC4)
+#define F_PL_INTR_MC4    V_PL_INTR_MC4(1U)
+
+#define S_PL_INTR_MC5    4
+#define V_PL_INTR_MC5(x) ((x) << S_PL_INTR_MC5)
+#define F_PL_INTR_MC5    V_PL_INTR_MC5(1U)
+
+#define S_PL_INTR_RAT    5
+#define V_PL_INTR_RAT(x) ((x) << S_PL_INTR_RAT)
+#define F_PL_INTR_RAT    V_PL_INTR_RAT(1U)
+
 #define S_PL_INTR_TP    6
 #define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP)
 #define F_PL_INTR_TP    V_PL_INTR_TP(1U)
 
+#define S_PL_INTR_ULP    7
+#define V_PL_INTR_ULP(x) ((x) << S_PL_INTR_ULP)
+#define F_PL_INTR_ULP    V_PL_INTR_ULP(1U)
+
 #define S_PL_INTR_ESPI    8
 #define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI)
 #define F_PL_INTR_ESPI    V_PL_INTR_ESPI(1U)
 
+#define S_PL_INTR_CSPI    9
+#define V_PL_INTR_CSPI(x) ((x) << S_PL_INTR_CSPI)
+#define F_PL_INTR_CSPI    V_PL_INTR_CSPI(1U)
+
 #define S_PL_INTR_PCIX    10
 #define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX)
 #define F_PL_INTR_PCIX    V_PL_INTR_PCIX(1U)
@@ -426,43 +1795,374 @@
 #define A_PL_CAUSE 0xa04
 
 /* MC5 registers */
-
 #define A_MC5_CONFIG 0xc04
 
+#define S_MODE    0
+#define V_MODE(x) ((x) << S_MODE)
+#define F_MODE    V_MODE(1U)
+
 #define S_TCAM_RESET    1
 #define V_TCAM_RESET(x) ((x) << S_TCAM_RESET)
 #define F_TCAM_RESET    V_TCAM_RESET(1U)
 
+#define S_TCAM_READY    2
+#define V_TCAM_READY(x) ((x) << S_TCAM_READY)
+#define F_TCAM_READY    V_TCAM_READY(1U)
+
+#define S_DBGI_ENABLE    4
+#define V_DBGI_ENABLE(x) ((x) << S_DBGI_ENABLE)
+#define F_DBGI_ENABLE    V_DBGI_ENABLE(1U)
+
 #define S_M_BUS_ENABLE    5
 #define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE)
 #define F_M_BUS_ENABLE    V_M_BUS_ENABLE(1U)
 
-/* PCICFG registers */
+#define S_PARITY_ENABLE    6
+#define V_PARITY_ENABLE(x) ((x) << S_PARITY_ENABLE)
+#define F_PARITY_ENABLE    V_PARITY_ENABLE(1U)
+
+#define S_SYN_ISSUE_MODE    7
+#define M_SYN_ISSUE_MODE    0x3
+#define V_SYN_ISSUE_MODE(x) ((x) << S_SYN_ISSUE_MODE)
+#define G_SYN_ISSUE_MODE(x) (((x) >> S_SYN_ISSUE_MODE) & M_SYN_ISSUE_MODE)
+
+#define S_BUILD    16
+#define V_BUILD(x) ((x) << S_BUILD)
+#define F_BUILD    V_BUILD(1U)
+
+#define S_COMPRESSION_ENABLE    17
+#define V_COMPRESSION_ENABLE(x) ((x) << S_COMPRESSION_ENABLE)
+#define F_COMPRESSION_ENABLE    V_COMPRESSION_ENABLE(1U)
+
+#define S_NUM_LIP    18
+#define M_NUM_LIP    0x3f
+#define V_NUM_LIP(x) ((x) << S_NUM_LIP)
+#define G_NUM_LIP(x) (((x) >> S_NUM_LIP) & M_NUM_LIP)
+
+#define S_TCAM_PART_CNT    24
+#define M_TCAM_PART_CNT    0x3
+#define V_TCAM_PART_CNT(x) ((x) << S_TCAM_PART_CNT)
+#define G_TCAM_PART_CNT(x) (((x) >> S_TCAM_PART_CNT) & M_TCAM_PART_CNT)
+
+#define S_TCAM_PART_TYPE    26
+#define M_TCAM_PART_TYPE    0x3
+#define V_TCAM_PART_TYPE(x) ((x) << S_TCAM_PART_TYPE)
+#define G_TCAM_PART_TYPE(x) (((x) >> S_TCAM_PART_TYPE) & M_TCAM_PART_TYPE)
+
+#define S_TCAM_PART_SIZE    28
+#define M_TCAM_PART_SIZE    0x3
+#define V_TCAM_PART_SIZE(x) ((x) << S_TCAM_PART_SIZE)
+#define G_TCAM_PART_SIZE(x) (((x) >> S_TCAM_PART_SIZE) & M_TCAM_PART_SIZE)
+
+#define S_TCAM_PART_TYPE_HI    30
+#define V_TCAM_PART_TYPE_HI(x) ((x) << S_TCAM_PART_TYPE_HI)
+#define F_TCAM_PART_TYPE_HI    V_TCAM_PART_TYPE_HI(1U)
+
+#define A_MC5_SIZE 0xc08
+
+#define S_SIZE    0
+#define M_SIZE    0x3fffff
+#define V_SIZE(x) ((x) << S_SIZE)
+#define G_SIZE(x) (((x) >> S_SIZE) & M_SIZE)
+
+#define A_MC5_ROUTING_TABLE_INDEX 0xc0c
 
+#define S_START_OF_ROUTING_TABLE    0
+#define M_START_OF_ROUTING_TABLE    0x3fffff
+#define V_START_OF_ROUTING_TABLE(x) ((x) << S_START_OF_ROUTING_TABLE)
+#define G_START_OF_ROUTING_TABLE(x) (((x) >> S_START_OF_ROUTING_TABLE) & M_START_OF_ROUTING_TABLE)
+
+#define A_MC5_SERVER_INDEX 0xc14
+
+#define S_START_OF_SERVER_INDEX    0
+#define M_START_OF_SERVER_INDEX    0x3fffff
+#define V_START_OF_SERVER_INDEX(x) ((x) << S_START_OF_SERVER_INDEX)
+#define G_START_OF_SERVER_INDEX(x) (((x) >> S_START_OF_SERVER_INDEX) & M_START_OF_SERVER_INDEX)
+
+#define A_MC5_LIP_RAM_ADDR 0xc18
+
+#define S_LOCAL_IP_RAM_ADDR    0
+#define M_LOCAL_IP_RAM_ADDR    0x3f
+#define V_LOCAL_IP_RAM_ADDR(x) ((x) << S_LOCAL_IP_RAM_ADDR)
+#define G_LOCAL_IP_RAM_ADDR(x) (((x) >> S_LOCAL_IP_RAM_ADDR) & M_LOCAL_IP_RAM_ADDR)
+
+#define S_RAM_WRITE_ENABLE    8
+#define V_RAM_WRITE_ENABLE(x) ((x) << S_RAM_WRITE_ENABLE)
+#define F_RAM_WRITE_ENABLE    V_RAM_WRITE_ENABLE(1U)
+
+#define A_MC5_LIP_RAM_DATA 0xc1c
+#define A_MC5_RSP_LATENCY 0xc20
+
+#define S_SEARCH_RESPONSE_LATENCY    0
+#define M_SEARCH_RESPONSE_LATENCY    0x1f
+#define V_SEARCH_RESPONSE_LATENCY(x) ((x) << S_SEARCH_RESPONSE_LATENCY)
+#define G_SEARCH_RESPONSE_LATENCY(x) (((x) >> S_SEARCH_RESPONSE_LATENCY) & M_SEARCH_RESPONSE_LATENCY)
+
+#define S_LEARN_RESPONSE_LATENCY    8
+#define M_LEARN_RESPONSE_LATENCY    0x1f
+#define V_LEARN_RESPONSE_LATENCY(x) ((x) << S_LEARN_RESPONSE_LATENCY)
+#define G_LEARN_RESPONSE_LATENCY(x) (((x) >> S_LEARN_RESPONSE_LATENCY) & M_LEARN_RESPONSE_LATENCY)
+
+#define A_MC5_PARITY_LATENCY 0xc24
+
+#define S_SRCHLAT    0
+#define M_SRCHLAT    0x1f
+#define V_SRCHLAT(x) ((x) << S_SRCHLAT)
+#define G_SRCHLAT(x) (((x) >> S_SRCHLAT) & M_SRCHLAT)
+
+#define S_PARLAT    8
+#define M_PARLAT    0x1f
+#define V_PARLAT(x) ((x) << S_PARLAT)
+#define G_PARLAT(x) (((x) >> S_PARLAT) & M_PARLAT)
+
+#define A_MC5_WR_LRN_VERIFY 0xc28
+
+#define S_POVEREN    0
+#define V_POVEREN(x) ((x) << S_POVEREN)
+#define F_POVEREN    V_POVEREN(1U)
+
+#define S_LRNVEREN    1
+#define V_LRNVEREN(x) ((x) << S_LRNVEREN)
+#define F_LRNVEREN    V_LRNVEREN(1U)
+
+#define S_VWVEREN    2
+#define V_VWVEREN(x) ((x) << S_VWVEREN)
+#define F_VWVEREN    V_VWVEREN(1U)
+
+#define A_MC5_PART_ID_INDEX 0xc2c
+
+#define S_IDINDEX    0
+#define M_IDINDEX    0xf
+#define V_IDINDEX(x) ((x) << S_IDINDEX)
+#define G_IDINDEX(x) (((x) >> S_IDINDEX) & M_IDINDEX)
+
+#define A_MC5_RESET_MAX 0xc30
+
+#define S_RSTMAX    0
+#define M_RSTMAX    0x1ff
+#define V_RSTMAX(x) ((x) << S_RSTMAX)
+#define G_RSTMAX(x) (((x) >> S_RSTMAX) & M_RSTMAX)
+
+#define A_MC5_INT_ENABLE 0xc40
+
+#define S_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR    0
+#define V_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR(x) ((x) << S_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR)
+#define F_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR    V_MC5_INT_HIT_OUT_ACTIVE_REGION_ERR(1U)
+
+#define S_MC5_INT_HIT_IN_ACTIVE_REGION_ERR    1
+#define V_MC5_INT_HIT_IN_ACTIVE_REGION_ERR(x) ((x) << S_MC5_INT_HIT_IN_ACTIVE_REGION_ERR)
+#define F_MC5_INT_HIT_IN_ACTIVE_REGION_ERR    V_MC5_INT_HIT_IN_ACTIVE_REGION_ERR(1U)
+
+#define S_MC5_INT_HIT_IN_RT_REGION_ERR    2
+#define V_MC5_INT_HIT_IN_RT_REGION_ERR(x) ((x) << S_MC5_INT_HIT_IN_RT_REGION_ERR)
+#define F_MC5_INT_HIT_IN_RT_REGION_ERR    V_MC5_INT_HIT_IN_RT_REGION_ERR(1U)
+
+#define S_MC5_INT_MISS_ERR    3
+#define V_MC5_INT_MISS_ERR(x) ((x) << S_MC5_INT_MISS_ERR)
+#define F_MC5_INT_MISS_ERR    V_MC5_INT_MISS_ERR(1U)
+
+#define S_MC5_INT_LIP0_ERR    4
+#define V_MC5_INT_LIP0_ERR(x) ((x) << S_MC5_INT_LIP0_ERR)
+#define F_MC5_INT_LIP0_ERR    V_MC5_INT_LIP0_ERR(1U)
+
+#define S_MC5_INT_LIP_MISS_ERR    5
+#define V_MC5_INT_LIP_MISS_ERR(x) ((x) << S_MC5_INT_LIP_MISS_ERR)
+#define F_MC5_INT_LIP_MISS_ERR    V_MC5_INT_LIP_MISS_ERR(1U)
+
+#define S_MC5_INT_PARITY_ERR    6
+#define V_MC5_INT_PARITY_ERR(x) ((x) << S_MC5_INT_PARITY_ERR)
+#define F_MC5_INT_PARITY_ERR    V_MC5_INT_PARITY_ERR(1U)
+
+#define S_MC5_INT_ACTIVE_REGION_FULL    7
+#define V_MC5_INT_ACTIVE_REGION_FULL(x) ((x) << S_MC5_INT_ACTIVE_REGION_FULL)
+#define F_MC5_INT_ACTIVE_REGION_FULL    V_MC5_INT_ACTIVE_REGION_FULL(1U)
+
+#define S_MC5_INT_NFA_SRCH_ERR    8
+#define V_MC5_INT_NFA_SRCH_ERR(x) ((x) << S_MC5_INT_NFA_SRCH_ERR)
+#define F_MC5_INT_NFA_SRCH_ERR    V_MC5_INT_NFA_SRCH_ERR(1U)
+
+#define S_MC5_INT_SYN_COOKIE    9
+#define V_MC5_INT_SYN_COOKIE(x) ((x) << S_MC5_INT_SYN_COOKIE)
+#define F_MC5_INT_SYN_COOKIE    V_MC5_INT_SYN_COOKIE(1U)
+
+#define S_MC5_INT_SYN_COOKIE_BAD    10
+#define V_MC5_INT_SYN_COOKIE_BAD(x) ((x) << S_MC5_INT_SYN_COOKIE_BAD)
+#define F_MC5_INT_SYN_COOKIE_BAD    V_MC5_INT_SYN_COOKIE_BAD(1U)
+
+#define S_MC5_INT_SYN_COOKIE_OFF    11
+#define V_MC5_INT_SYN_COOKIE_OFF(x) ((x) << S_MC5_INT_SYN_COOKIE_OFF)
+#define F_MC5_INT_SYN_COOKIE_OFF    V_MC5_INT_SYN_COOKIE_OFF(1U)
+
+#define S_MC5_INT_UNKNOWN_CMD    15
+#define V_MC5_INT_UNKNOWN_CMD(x) ((x) << S_MC5_INT_UNKNOWN_CMD)
+#define F_MC5_INT_UNKNOWN_CMD    V_MC5_INT_UNKNOWN_CMD(1U)
+
+#define S_MC5_INT_REQUESTQ_PARITY_ERR    16
+#define V_MC5_INT_REQUESTQ_PARITY_ERR(x) ((x) << S_MC5_INT_REQUESTQ_PARITY_ERR)
+#define F_MC5_INT_REQUESTQ_PARITY_ERR    V_MC5_INT_REQUESTQ_PARITY_ERR(1U)
+
+#define S_MC5_INT_DISPATCHQ_PARITY_ERR    17
+#define V_MC5_INT_DISPATCHQ_PARITY_ERR(x) ((x) << S_MC5_INT_DISPATCHQ_PARITY_ERR)
+#define F_MC5_INT_DISPATCHQ_PARITY_ERR    V_MC5_INT_DISPATCHQ_PARITY_ERR(1U)
+
+#define S_MC5_INT_DEL_ACT_EMPTY    18
+#define V_MC5_INT_DEL_ACT_EMPTY(x) ((x) << S_MC5_INT_DEL_ACT_EMPTY)
+#define F_MC5_INT_DEL_ACT_EMPTY    V_MC5_INT_DEL_ACT_EMPTY(1U)
+
+#define A_MC5_INT_CAUSE 0xc44
+#define A_MC5_INT_TID 0xc48
+#define A_MC5_INT_PTID 0xc4c
+#define A_MC5_DBGI_CONFIG 0xc74
+#define A_MC5_DBGI_REQ_CMD 0xc78
+
+#define S_CMDMODE    0
+#define M_CMDMODE    0x7
+#define V_CMDMODE(x) ((x) << S_CMDMODE)
+#define G_CMDMODE(x) (((x) >> S_CMDMODE) & M_CMDMODE)
+
+#define S_SADRSEL    4
+#define V_SADRSEL(x) ((x) << S_SADRSEL)
+#define F_SADRSEL    V_SADRSEL(1U)
+
+#define S_WRITE_BURST_SIZE    22
+#define M_WRITE_BURST_SIZE    0x3ff
+#define V_WRITE_BURST_SIZE(x) ((x) << S_WRITE_BURST_SIZE)
+#define G_WRITE_BURST_SIZE(x) (((x) >> S_WRITE_BURST_SIZE) & M_WRITE_BURST_SIZE)
+
+#define A_MC5_DBGI_REQ_ADDR0 0xc7c
+#define A_MC5_DBGI_REQ_ADDR1 0xc80
+#define A_MC5_DBGI_REQ_ADDR2 0xc84
+#define A_MC5_DBGI_REQ_DATA0 0xc88
+#define A_MC5_DBGI_REQ_DATA1 0xc8c
+#define A_MC5_DBGI_REQ_DATA2 0xc90
+#define A_MC5_DBGI_REQ_DATA3 0xc94
+#define A_MC5_DBGI_REQ_DATA4 0xc98
+#define A_MC5_DBGI_REQ_MASK0 0xc9c
+#define A_MC5_DBGI_REQ_MASK1 0xca0
+#define A_MC5_DBGI_REQ_MASK2 0xca4
+#define A_MC5_DBGI_REQ_MASK3 0xca8
+#define A_MC5_DBGI_REQ_MASK4 0xcac
+#define A_MC5_DBGI_RSP_STATUS 0xcb0
+
+#define S_DBGI_RSP_VALID    0
+#define V_DBGI_RSP_VALID(x) ((x) << S_DBGI_RSP_VALID)
+#define F_DBGI_RSP_VALID    V_DBGI_RSP_VALID(1U)
+
+#define S_DBGI_RSP_HIT    1
+#define V_DBGI_RSP_HIT(x) ((x) << S_DBGI_RSP_HIT)
+#define F_DBGI_RSP_HIT    V_DBGI_RSP_HIT(1U)
+
+#define S_DBGI_RSP_ERR    2
+#define V_DBGI_RSP_ERR(x) ((x) << S_DBGI_RSP_ERR)
+#define F_DBGI_RSP_ERR    V_DBGI_RSP_ERR(1U)
+
+#define S_DBGI_RSP_ERR_REASON    8
+#define M_DBGI_RSP_ERR_REASON    0x7
+#define V_DBGI_RSP_ERR_REASON(x) ((x) << S_DBGI_RSP_ERR_REASON)
+#define G_DBGI_RSP_ERR_REASON(x) (((x) >> S_DBGI_RSP_ERR_REASON) & M_DBGI_RSP_ERR_REASON)
+
+#define A_MC5_DBGI_RSP_DATA0 0xcb4
+#define A_MC5_DBGI_RSP_DATA1 0xcb8
+#define A_MC5_DBGI_RSP_DATA2 0xcbc
+#define A_MC5_DBGI_RSP_DATA3 0xcc0
+#define A_MC5_DBGI_RSP_DATA4 0xcc4
+#define A_MC5_DBGI_RSP_LAST_CMD 0xcc8
+#define A_MC5_POPEN_DATA_WR_CMD 0xccc
+#define A_MC5_POPEN_MASK_WR_CMD 0xcd0
+#define A_MC5_AOPEN_SRCH_CMD 0xcd4
+#define A_MC5_AOPEN_LRN_CMD 0xcd8
+#define A_MC5_SYN_SRCH_CMD 0xcdc
+#define A_MC5_SYN_LRN_CMD 0xce0
+#define A_MC5_ACK_SRCH_CMD 0xce4
+#define A_MC5_ACK_LRN_CMD 0xce8
+#define A_MC5_ILOOKUP_CMD 0xcec
+#define A_MC5_ELOOKUP_CMD 0xcf0
+#define A_MC5_DATA_WRITE_CMD 0xcf4
+#define A_MC5_DATA_READ_CMD 0xcf8
+#define A_MC5_MASK_WRITE_CMD 0xcfc
+
+/* PCICFG registers */
 #define A_PCICFG_PM_CSR 0x44
 #define A_PCICFG_VPD_ADDR 0x4a
 
+#define S_VPD_ADDR    0
+#define M_VPD_ADDR    0x7fff
+#define V_VPD_ADDR(x) ((x) << S_VPD_ADDR)
+#define G_VPD_ADDR(x) (((x) >> S_VPD_ADDR) & M_VPD_ADDR)
+
 #define S_VPD_OP_FLAG    15
 #define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG)
 #define F_VPD_OP_FLAG    V_VPD_OP_FLAG(1U)
 
 #define A_PCICFG_VPD_DATA 0x4c
-
+#define A_PCICFG_PCIX_CMD 0x60
 #define A_PCICFG_INTR_ENABLE 0xf4
-#define A_PCICFG_INTR_CAUSE 0xf8
 
+#define S_MASTER_PARITY_ERR    0
+#define V_MASTER_PARITY_ERR(x) ((x) << S_MASTER_PARITY_ERR)
+#define F_MASTER_PARITY_ERR    V_MASTER_PARITY_ERR(1U)
+
+#define S_SIG_TARGET_ABORT    1
+#define V_SIG_TARGET_ABORT(x) ((x) << S_SIG_TARGET_ABORT)
+#define F_SIG_TARGET_ABORT    V_SIG_TARGET_ABORT(1U)
+
+#define S_RCV_TARGET_ABORT    2
+#define V_RCV_TARGET_ABORT(x) ((x) << S_RCV_TARGET_ABORT)
+#define F_RCV_TARGET_ABORT    V_RCV_TARGET_ABORT(1U)
+
+#define S_RCV_MASTER_ABORT    3
+#define V_RCV_MASTER_ABORT(x) ((x) << S_RCV_MASTER_ABORT)
+#define F_RCV_MASTER_ABORT    V_RCV_MASTER_ABORT(1U)
+
+#define S_SIG_SYS_ERR    4
+#define V_SIG_SYS_ERR(x) ((x) << S_SIG_SYS_ERR)
+#define F_SIG_SYS_ERR    V_SIG_SYS_ERR(1U)
+
+#define S_DET_PARITY_ERR    5
+#define V_DET_PARITY_ERR(x) ((x) << S_DET_PARITY_ERR)
+#define F_DET_PARITY_ERR    V_DET_PARITY_ERR(1U)
+
+#define S_PIO_PARITY_ERR    6
+#define V_PIO_PARITY_ERR(x) ((x) << S_PIO_PARITY_ERR)
+#define F_PIO_PARITY_ERR    V_PIO_PARITY_ERR(1U)
+
+#define S_WF_PARITY_ERR    7
+#define V_WF_PARITY_ERR(x) ((x) << S_WF_PARITY_ERR)
+#define F_WF_PARITY_ERR    V_WF_PARITY_ERR(1U)
+
+#define S_RF_PARITY_ERR    8
+#define M_RF_PARITY_ERR    0x3
+#define V_RF_PARITY_ERR(x) ((x) << S_RF_PARITY_ERR)
+#define G_RF_PARITY_ERR(x) (((x) >> S_RF_PARITY_ERR) & M_RF_PARITY_ERR)
+
+#define S_CF_PARITY_ERR    10
+#define M_CF_PARITY_ERR    0x3
+#define V_CF_PARITY_ERR(x) ((x) << S_CF_PARITY_ERR)
+#define G_CF_PARITY_ERR(x) (((x) >> S_CF_PARITY_ERR) & M_CF_PARITY_ERR)
+
+#define A_PCICFG_INTR_CAUSE 0xf8
 #define A_PCICFG_MODE 0xfc
 
 #define S_PCI_MODE_64BIT    0
 #define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT)
 #define F_PCI_MODE_64BIT    V_PCI_MODE_64BIT(1U)
 
+#define S_PCI_MODE_66MHZ    1
+#define V_PCI_MODE_66MHZ(x) ((x) << S_PCI_MODE_66MHZ)
+#define F_PCI_MODE_66MHZ    V_PCI_MODE_66MHZ(1U)
+
+#define S_PCI_MODE_PCIX_INITPAT    2
+#define M_PCI_MODE_PCIX_INITPAT    0x7
+#define V_PCI_MODE_PCIX_INITPAT(x) ((x) << S_PCI_MODE_PCIX_INITPAT)
+#define G_PCI_MODE_PCIX_INITPAT(x) (((x) >> S_PCI_MODE_PCIX_INITPAT) & M_PCI_MODE_PCIX_INITPAT)
+
 #define S_PCI_MODE_PCIX    5
 #define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX)
 #define F_PCI_MODE_PCIX    V_PCI_MODE_PCIX(1U)
 
 #define S_PCI_MODE_CLK    6
 #define M_PCI_MODE_CLK    0x3
+#define V_PCI_MODE_CLK(x) ((x) << S_PCI_MODE_CLK)
 #define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK)
 
 #endif /* _CXGB_REGS_H_ */

drivers/net/chelsio/sge.c

@@ -42,12 +42,14 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/pci.h>
+#include <linux/ktime.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
 #include <linux/skbuff.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/tcp.h>
 #include <linux/ip.h>
 #include <linux/in.h>
 #include <linux/if_arp.h>
@@ -57,10 +59,8 @@
 #include "regs.h"
 #include "espi.h"
 
-
-#ifdef NETIF_F_TSO
-#include <linux/tcp.h>
-#endif
+/* This belongs in if_ether.h */
+#define ETH_P_CPL5 0xf
 
 #define SGE_CMDQ_N		2
 #define SGE_FREELQ_N		2
@@ -73,6 +73,7 @@
 #define SGE_INTRTIMER_NRES	1000
 #define SGE_RX_COPY_THRES	256
 #define SGE_RX_SM_BUF_SIZE	1536
+#define SGE_TX_DESC_MAX_PLEN	16384
 
 # define SGE_RX_DROP_THRES 2
 
@@ -193,8 +194,8 @@ struct cmdQ {
 	u8              sop;            /* is next entry start of packet? */
 	struct cmdQ_e  *entries;        /* HW command descriptor Q */
 	struct cmdQ_ce *centries;       /* SW command context descriptor Q */
-	spinlock_t	lock;           /* Lock to protect cmdQ enqueuing */
 	dma_addr_t	dma_addr;       /* DMA addr HW command descriptor Q */
+ 	spinlock_t	lock;           /* Lock to protect cmdQ enqueuing */
 };
 
 struct freelQ {
@@ -226,6 +227,29 @@ enum {
 	CMDQ_STAT_LAST_PKT_DB = 2       /* last packet rung the doorbell */
 };
 
+/* T204 TX SW scheduler */
+
+/* Per T204 TX port */
+struct sched_port {
+	unsigned int	avail;		/* available bits - quota */
+	unsigned int	drain_bits_per_1024ns; /* drain rate */
+	unsigned int	speed;		/* drain rate, mbps */
+	unsigned int	mtu;		/* mtu size */
+	struct sk_buff_head skbq;	/* pending skbs */
+};
+
+/* Per T204 device */
+struct sched {
+	ktime_t         last_updated;   /* last time quotas were computed */
+	unsigned int 	max_avail;	/* max bits to be sent to any port */
+	unsigned int 	port;		/* port index (round robin ports) */
+	unsigned int 	num;		/* num skbs in per port queues */
+	struct sched_port p[MAX_NPORTS];
+	struct tasklet_struct sched_tsk;/* tasklet used to run scheduler */
+};
+static void restart_sched(unsigned long);
+
+
 /*
  * Main SGE data structure
  *
@@ -246,14 +270,236 @@ struct sge {
 	unsigned int    fixed_intrtimer;/* non-adaptive interrupt timer */
 	struct timer_list tx_reclaim_timer; /* reclaims TX buffers */
 	struct timer_list espibug_timer;
-	unsigned int	espibug_timeout;
-	struct sk_buff	*espibug_skb;
+	unsigned long	espibug_timeout;
+	struct sk_buff	*espibug_skb[MAX_NPORTS];
 	u32		sge_control;	/* shadow value of sge control reg */
 	struct sge_intr_counts stats;
 	struct sge_port_stats port_stats[MAX_NPORTS];
+	struct sched	*tx_sched;
 	struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
 };
 
+/*
+ * stop tasklet and free all pending skb's
+ */
+static void tx_sched_stop(struct sge *sge)
+{
+	struct sched *s = sge->tx_sched;
+	int i;
+
+	tasklet_kill(&s->sched_tsk);
+
+	for (i = 0; i < MAX_NPORTS; i++)
+		__skb_queue_purge(&s->p[s->port].skbq);
+}
+
+/*
+ * t1_sched_update_parms() is called when the MTU or link speed changes. It
+ * re-computes scheduler parameters to scope with the change.
+ */
+unsigned int t1_sched_update_parms(struct sge *sge, unsigned int port,
+				   unsigned int mtu, unsigned int speed)
+{
+	struct sched *s = sge->tx_sched;
+	struct sched_port *p = &s->p[port];
+	unsigned int max_avail_segs;
+
+	pr_debug("t1_sched_update_params mtu=%d speed=%d\n", mtu, speed);
+	if (speed)
+		p->speed = speed;
+	if (mtu)
+		p->mtu = mtu;
+
+	if (speed || mtu) {
+		unsigned long long drain = 1024ULL * p->speed * (p->mtu - 40);
+		do_div(drain, (p->mtu + 50) * 1000);
+		p->drain_bits_per_1024ns = (unsigned int) drain;
+
+		if (p->speed < 1000)
+			p->drain_bits_per_1024ns =
+				90 * p->drain_bits_per_1024ns / 100;
+	}
+
+	if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204) {
+		p->drain_bits_per_1024ns -= 16;
+		s->max_avail = max(4096U, p->mtu + 16 + 14 + 4);
+		max_avail_segs = max(1U, 4096 / (p->mtu - 40));
+	} else {
+		s->max_avail = 16384;
+		max_avail_segs = max(1U, 9000 / (p->mtu - 40));
+	}
+
+	pr_debug("t1_sched_update_parms: mtu %u speed %u max_avail %u "
+		 "max_avail_segs %u drain_bits_per_1024ns %u\n", p->mtu,
+		 p->speed, s->max_avail, max_avail_segs,
+		 p->drain_bits_per_1024ns);
+
+	return max_avail_segs * (p->mtu - 40);
+}
+
+/*
+ * t1_sched_max_avail_bytes() tells the scheduler the maximum amount of
+ * data that can be pushed per port.
+ */
+void t1_sched_set_max_avail_bytes(struct sge *sge, unsigned int val)
+{
+	struct sched *s = sge->tx_sched;
+	unsigned int i;
+
+	s->max_avail = val;
+	for (i = 0; i < MAX_NPORTS; i++)
+		t1_sched_update_parms(sge, i, 0, 0);
+}
+
+/*
+ * t1_sched_set_drain_bits_per_us() tells the scheduler at which rate a port
+ * is draining.
+ */
+void t1_sched_set_drain_bits_per_us(struct sge *sge, unsigned int port,
+					 unsigned int val)
+{
+	struct sched *s = sge->tx_sched;
+	struct sched_port *p = &s->p[port];
+	p->drain_bits_per_1024ns = val * 1024 / 1000;
+	t1_sched_update_parms(sge, port, 0, 0);
+}
+
+
+/*
+ * get_clock() implements a ns clock (see ktime_get)
+ */
+static inline ktime_t get_clock(void)
+{
+	struct timespec ts;
+
+	ktime_get_ts(&ts);
+	return timespec_to_ktime(ts);
+}
+
+/*
+ * tx_sched_init() allocates resources and does basic initialization.
+ */
+static int tx_sched_init(struct sge *sge)
+{
+	struct sched *s;
+	int i;
+
+	s = kzalloc(sizeof (struct sched), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	pr_debug("tx_sched_init\n");
+	tasklet_init(&s->sched_tsk, restart_sched, (unsigned long) sge);
+	sge->tx_sched = s;
+
+	for (i = 0; i < MAX_NPORTS; i++) {
+		skb_queue_head_init(&s->p[i].skbq);
+		t1_sched_update_parms(sge, i, 1500, 1000);
+	}
+
+	return 0;
+}
+
+/*
+ * sched_update_avail() computes the delta since the last time it was called
+ * and updates the per port quota (number of bits that can be sent to the any
+ * port).
+ */
+static inline int sched_update_avail(struct sge *sge)
+{
+	struct sched *s = sge->tx_sched;
+	ktime_t now = get_clock();
+	unsigned int i;
+	long long delta_time_ns;
+
+	delta_time_ns = ktime_to_ns(ktime_sub(now, s->last_updated));
+
+	pr_debug("sched_update_avail delta=%lld\n", delta_time_ns);
+	if (delta_time_ns < 15000)
+		return 0;
+
+	for (i = 0; i < MAX_NPORTS; i++) {
+		struct sched_port *p = &s->p[i];
+		unsigned int delta_avail;
+
+		delta_avail = (p->drain_bits_per_1024ns * delta_time_ns) >> 13;
+		p->avail = min(p->avail + delta_avail, s->max_avail);
+	}
+
+	s->last_updated = now;
+
+	return 1;
+}
+
+/*
+ * sched_skb() is called from two different places. In the tx path, any
+ * packet generating load on an output port will call sched_skb()
+ * (skb != NULL). In addition, sched_skb() is called from the irq/soft irq
+ * context (skb == NULL).
+ * The scheduler only returns a skb (which will then be sent) if the
+ * length of the skb is <= the current quota of the output port.
+ */
+static struct sk_buff *sched_skb(struct sge *sge, struct sk_buff *skb,
+				unsigned int credits)
+{
+	struct sched *s = sge->tx_sched;
+	struct sk_buff_head *skbq;
+	unsigned int i, len, update = 1;
+
+	pr_debug("sched_skb %p\n", skb);
+	if (!skb) {
+		if (!s->num)
+			return NULL;
+	} else {
+		skbq = &s->p[skb->dev->if_port].skbq;
+		__skb_queue_tail(skbq, skb);
+		s->num++;
+		skb = NULL;
+	}
+
+	if (credits < MAX_SKB_FRAGS + 1)
+		goto out;
+
+ again:
+	for (i = 0; i < MAX_NPORTS; i++) {
+		s->port = ++s->port & (MAX_NPORTS - 1);
+		skbq = &s->p[s->port].skbq;
+
+		skb = skb_peek(skbq);
+
+		if (!skb)
+			continue;
+
+		len = skb->len;
+		if (len <= s->p[s->port].avail) {
+			s->p[s->port].avail -= len;
+			s->num--;
+			__skb_unlink(skb, skbq);
+			goto out;
+		}
+		skb = NULL;
+	}
+
+	if (update-- && sched_update_avail(sge))
+		goto again;
+
+ out:
+ 	/* If there are more pending skbs, we use the hardware to schedule us
+	 * again.
+	 */
+	if (s->num && !skb) {
+		struct cmdQ *q = &sge->cmdQ[0];
+		clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+		if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) {
+			set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+			writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL);
+		}
+	}
+	pr_debug("sched_skb ret %p\n", skb);
+
+	return skb;
+}
+
 /*
  * PIO to indicate that memory mapped Q contains valid descriptor(s).
  */
@@ -350,9 +596,12 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p)
 	sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE +
 		sizeof(struct cpl_rx_data) +
 		sge->freelQ[!sge->jumbo_fl].dma_offset;
-	sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) -
+
+		size = (16 * 1024) -
 		    SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
+	sge->freelQ[sge->jumbo_fl].rx_buffer_size = size;
+
 	/*
 	 * Setup which skb recycle Q should be used when recycling buffers from
 	 * each free list.
@@ -388,17 +637,23 @@ static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n)
 	q->in_use -= n;
 	ce = &q->centries[cidx];
 	while (n--) {
-		if (q->sop)
-			pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+		if (q->sop) {
+			if (likely(pci_unmap_len(ce, dma_len))) {
+				pci_unmap_single(pdev,
+						 pci_unmap_addr(ce, dma_addr),
 			 			 pci_unmap_len(ce, dma_len),
 						 PCI_DMA_TODEVICE);
-		else
+				q->sop = 0;
+			}
+		} else {
+			if (likely(pci_unmap_len(ce, dma_len))) {
 				pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr),
 			 		       pci_unmap_len(ce, dma_len),
 					       PCI_DMA_TODEVICE);
-		q->sop = 0;
+			}
+		}
 		if (ce->skb) {
-			dev_kfree_skb(ce->skb);
+			dev_kfree_skb_any(ce->skb);
 			q->sop = 1;
 		}
 		ce++;
@@ -538,7 +793,6 @@ static void configure_sge(struct sge *sge, struct sge_params *p)
 	sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE |
 		F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE |
 		V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE |
-		F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS |
 		V_RX_PKT_OFFSET(sge->rx_pkt_pad);
 
 #if defined(__BIG_ENDIAN_BITFIELD)
@@ -566,9 +820,7 @@ static inline unsigned int jumbo_payload_capacity(const struct sge *sge)
  */
 void t1_sge_destroy(struct sge *sge)
 {
-	if (sge->espibug_skb)
-		kfree_skb(sge->espibug_skb);
-
+	kfree(sge->tx_sched);
 	free_tx_resources(sge);
 	free_rx_resources(sge);
 	kfree(sge);
@@ -853,6 +1105,99 @@ static void unexpected_offload(struct adapter *adapter, struct freelQ *fl)
 	recycle_fl_buf(fl, fl->cidx);
 }
 
+/*
+ * T1/T2 SGE limits the maximum DMA size per TX descriptor to
+ * SGE_TX_DESC_MAX_PLEN (16KB). If the PAGE_SIZE is larger than 16KB, the
+ * stack might send more than SGE_TX_DESC_MAX_PLEN in a contiguous manner.
+ * Note that the *_large_page_tx_descs stuff will be optimized out when
+ * PAGE_SIZE <= SGE_TX_DESC_MAX_PLEN.
+ *
+ * compute_large_page_descs() computes how many additional descriptors are
+ * required to break down the stack's request.
+ */
+static inline unsigned int compute_large_page_tx_descs(struct sk_buff *skb)
+{
+	unsigned int count = 0;
+	if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) {
+		unsigned int nfrags = skb_shinfo(skb)->nr_frags;
+		unsigned int i, len = skb->len - skb->data_len;
+		while (len > SGE_TX_DESC_MAX_PLEN) {
+			count++;
+			len -= SGE_TX_DESC_MAX_PLEN;
+		}
+		for (i = 0; nfrags--; i++) {
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			len = frag->size;
+			while (len > SGE_TX_DESC_MAX_PLEN) {
+				count++;
+				len -= SGE_TX_DESC_MAX_PLEN;
+			}
+		}
+	}
+	return count;
+}
+
+/*
+ * Write a cmdQ entry.
+ *
+ * Since this function writes the 'flags' field, it must not be used to
+ * write the first cmdQ entry.
+ */
+static inline void write_tx_desc(struct cmdQ_e *e, dma_addr_t mapping,
+				 unsigned int len, unsigned int gen,
+				 unsigned int eop)
+{
+	if (unlikely(len > SGE_TX_DESC_MAX_PLEN))
+		BUG();
+	e->addr_lo = (u32)mapping;
+	e->addr_hi = (u64)mapping >> 32;
+	e->len_gen = V_CMD_LEN(len) | V_CMD_GEN1(gen);
+	e->flags = F_CMD_DATAVALID | V_CMD_EOP(eop) | V_CMD_GEN2(gen);
+}
+
+/*
+ * See comment for previous function.
+ *
+ * write_tx_descs_large_page() writes additional SGE tx descriptors if
+ * *desc_len exceeds HW's capability.
+ */
+static inline unsigned int write_large_page_tx_descs(unsigned int pidx,
+						     struct cmdQ_e **e,
+						     struct cmdQ_ce **ce,
+						     unsigned int *gen,
+						     dma_addr_t *desc_mapping,
+						     unsigned int *desc_len,
+						     unsigned int nfrags,
+						     struct cmdQ *q)
+{
+	if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) {
+		struct cmdQ_e *e1 = *e;
+		struct cmdQ_ce *ce1 = *ce;
+
+		while (*desc_len > SGE_TX_DESC_MAX_PLEN) {
+			*desc_len -= SGE_TX_DESC_MAX_PLEN;
+			write_tx_desc(e1, *desc_mapping, SGE_TX_DESC_MAX_PLEN,
+				      *gen, nfrags == 0 && *desc_len == 0);
+			ce1->skb = NULL;
+			pci_unmap_len_set(ce1, dma_len, 0);
+			*desc_mapping += SGE_TX_DESC_MAX_PLEN;
+			if (*desc_len) {
+				ce1++;
+				e1++;
+				if (++pidx == q->size) {
+					pidx = 0;
+					*gen ^= 1;
+					ce1 = q->centries;
+					e1 = q->entries;
+				}
+			}
+		}
+		*e = e1;
+		*ce = ce1;
+	}
+	return pidx;
+}
+
 /*
  * Write the command descriptors to transmit the given skb starting at
  * descriptor pidx with the given generation.
@@ -861,50 +1206,84 @@ static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb,
 				  unsigned int pidx, unsigned int gen,
 				  struct cmdQ *q)
 {
-	dma_addr_t mapping;
+	dma_addr_t mapping, desc_mapping;
 	struct cmdQ_e *e, *e1;
 	struct cmdQ_ce *ce;
-	unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags;
+	unsigned int i, flags, first_desc_len, desc_len,
+	    nfrags = skb_shinfo(skb)->nr_frags;
+
+	e = e1 = &q->entries[pidx];
+	ce = &q->centries[pidx];
 
 	mapping = pci_map_single(adapter->pdev, skb->data,
 				skb->len - skb->data_len, PCI_DMA_TODEVICE);
-	ce = &q->centries[pidx];
+
+	desc_mapping = mapping;
+	desc_len = skb->len - skb->data_len;
+
+	flags = F_CMD_DATAVALID | F_CMD_SOP |
+	    V_CMD_EOP(nfrags == 0 && desc_len <= SGE_TX_DESC_MAX_PLEN) |
+	    V_CMD_GEN2(gen);
+	first_desc_len = (desc_len <= SGE_TX_DESC_MAX_PLEN) ?
+	    desc_len : SGE_TX_DESC_MAX_PLEN;
+	e->addr_lo = (u32)desc_mapping;
+	e->addr_hi = (u64)desc_mapping >> 32;
+	e->len_gen = V_CMD_LEN(first_desc_len) | V_CMD_GEN1(gen);
+	ce->skb = NULL;
+	pci_unmap_len_set(ce, dma_len, 0);
+
+	if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN &&
+	    desc_len > SGE_TX_DESC_MAX_PLEN) {
+		desc_mapping += first_desc_len;
+		desc_len -= first_desc_len;
+		e1++;
+		ce++;
+		if (++pidx == q->size) {
+			pidx = 0;
+			gen ^= 1;
+			e1 = q->entries;
+			ce = q->centries;
+		}
+		pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen,
+						 &desc_mapping, &desc_len,
+						 nfrags, q);
+
+		if (likely(desc_len))
+			write_tx_desc(e1, desc_mapping, desc_len, gen,
+				      nfrags == 0);
+	}
+
 	ce->skb = NULL;
 	pci_unmap_addr_set(ce, dma_addr, mapping);
 	pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len);
 
-	flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) |
-		V_CMD_GEN2(gen);
-	e = &q->entries[pidx];
-	e->addr_lo = (u32)mapping;
-	e->addr_hi = (u64)mapping >> 32;
-	e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen);
-	for (e1 = e, i = 0; nfrags--; i++) {
+	for (i = 0; nfrags--; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
-		ce++;
 		e1++;
+		ce++;
 		if (++pidx == q->size) {
 			pidx = 0;
 			gen ^= 1;
-			ce = q->centries;
 			e1 = q->entries;
+			ce = q->centries;
 		}
 
 		mapping = pci_map_page(adapter->pdev, frag->page,
 				       frag->page_offset, frag->size,
 				       PCI_DMA_TODEVICE);
+		desc_mapping = mapping;
+		desc_len = frag->size;
+
+		pidx = write_large_page_tx_descs(pidx, &e1, &ce, &gen,
+						 &desc_mapping, &desc_len,
+						 nfrags, q);
+		if (likely(desc_len))
+			write_tx_desc(e1, desc_mapping, desc_len, gen,
+				      nfrags == 0);
 		ce->skb = NULL;
 		pci_unmap_addr_set(ce, dma_addr, mapping);
 		pci_unmap_len_set(ce, dma_len, frag->size);
-
-		e1->addr_lo = (u32)mapping;
-		e1->addr_hi = (u64)mapping >> 32;
-		e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen);
-		e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) |
-			    V_CMD_GEN2(gen);
 	}
-
 	ce->skb = skb;
 	wmb();
 	e->flags = flags;
@@ -918,14 +1297,56 @@ static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q)
 	unsigned int reclaim = q->processed - q->cleaned;
 
 	if (reclaim) {
+		pr_debug("reclaim_completed_tx processed:%d cleaned:%d\n",
+			 q->processed, q->cleaned);
 		free_cmdQ_buffers(sge, q, reclaim);
 		q->cleaned += reclaim;
 	}
 }
 
-#ifndef SET_ETHTOOL_OPS
-# define __netif_rx_complete(dev) netif_rx_complete(dev)
-#endif
+/*
+ * Called from tasklet. Checks the scheduler for any
+ * pending skbs that can be sent.
+ */
+static void restart_sched(unsigned long arg)
+{
+	struct sge *sge = (struct sge *) arg;
+	struct adapter *adapter = sge->adapter;
+	struct cmdQ *q = &sge->cmdQ[0];
+	struct sk_buff *skb;
+	unsigned int credits, queued_skb = 0;
+
+	spin_lock(&q->lock);
+	reclaim_completed_tx(sge, q);
+
+	credits = q->size - q->in_use;
+	pr_debug("restart_sched credits=%d\n", credits);
+	while ((skb = sched_skb(sge, NULL, credits)) != NULL) {
+		unsigned int genbit, pidx, count;
+	        count = 1 + skb_shinfo(skb)->nr_frags;
+       		count += compute_large_page_tx_descs(skb);
+		q->in_use += count;
+		genbit = q->genbit;
+		pidx = q->pidx;
+		q->pidx += count;
+		if (q->pidx >= q->size) {
+			q->pidx -= q->size;
+			q->genbit ^= 1;
+		}
+		write_tx_descs(adapter, skb, pidx, genbit, q);
+	        credits = q->size - q->in_use;
+		queued_skb = 1;
+	}
+
+	if (queued_skb) {
+		clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+		if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) {
+			set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+			writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+		}
+	}
+	spin_unlock(&q->lock);
+}
 
 /**
  *	sge_rx - process an ingress ethernet packet
@@ -953,6 +1374,11 @@ static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
 	p = (struct cpl_rx_pkt *)skb->data;
 	skb_pull(skb, sizeof(*p));
 	skb->dev = adapter->port[p->iff].dev;
+	if (p->iff >= adapter->params.nports) {
+		kfree_skb(skb);
+		return 0;
+	}
+
 	skb->dev->last_rx = jiffies;
 	skb->protocol = eth_type_trans(skb, skb->dev);
 	if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
@@ -1025,7 +1451,10 @@ static unsigned int update_tx_info(struct adapter *adapter,
 	struct cmdQ *cmdq = &sge->cmdQ[0];
 
 	cmdq->processed += pr0;
-
+	if (flags & (F_FL0_ENABLE | F_FL1_ENABLE)) {
+		freelQs_empty(sge);
+		flags &= ~(F_FL0_ENABLE | F_FL1_ENABLE);
+	}
 	if (flags & F_CMDQ0_ENABLE) {
 		clear_bit(CMDQ_STAT_RUNNING, &cmdq->status);
 
@@ -1034,6 +1463,9 @@ static unsigned int update_tx_info(struct adapter *adapter,
 			set_bit(CMDQ_STAT_RUNNING, &cmdq->status);
 			writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
 		}
+		if (sge->tx_sched)
+			tasklet_hi_schedule(&sge->tx_sched->sched_tsk);
+
 		flags &= ~F_CMDQ0_ENABLE;
 	}
 
@@ -1234,13 +1666,14 @@ static irqreturn_t t1_interrupt_napi(int irq, void *data)
 					       "NAPI schedule failure!\n");
 			} else
 				writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+
 			handled = 1;
 			goto unlock;
 		} else
 			writel(q->cidx, adapter->regs + A_SG_SLEEPING);
-	}  else
-	if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA)
+	}  else if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) {
 	        printk(KERN_ERR "data interrupt while NAPI running\n");
+	}
 	
 	handled = t1_slow_intr_handler(adapter);
 	if (!handled)
@@ -1321,7 +1754,7 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
 {
 	struct sge *sge = adapter->sge;
 	struct cmdQ *q = &sge->cmdQ[qid];
-	unsigned int credits, pidx, genbit, count;
+	unsigned int credits, pidx, genbit, count, use_sched_skb = 0;
 
 	spin_lock(&q->lock);
 	reclaim_completed_tx(sge, q);
@@ -1329,26 +1762,49 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
 	pidx = q->pidx;
 	credits = q->size - q->in_use;
 	count = 1 + skb_shinfo(skb)->nr_frags;
+	count += compute_large_page_tx_descs(skb);
 
-	{	/* Ethernet packet */
+	/* Ethernet packet */
 	if (unlikely(credits < count)) {
+		if (!netif_queue_stopped(dev)) {
 			netif_stop_queue(dev);
 			set_bit(dev->if_port, &sge->stopped_tx_queues);
 			sge->stats.cmdQ_full[2]++;
-			spin_unlock(&q->lock);
-			if (!netif_queue_stopped(dev))
 			CH_ERR("%s: Tx ring full while queue awake!\n",
 			       adapter->name);
+		}
+		spin_unlock(&q->lock);
 		return NETDEV_TX_BUSY;
 	}
+
 	if (unlikely(credits - count < q->stop_thres)) {
-			sge->stats.cmdQ_full[2]++;
 		netif_stop_queue(dev);
 		set_bit(dev->if_port, &sge->stopped_tx_queues);
+		sge->stats.cmdQ_full[2]++;
+	}
+
+	/* T204 cmdQ0 skbs that are destined for a certain port have to go
+	 * through the scheduler.
+	 */
+	if (sge->tx_sched && !qid && skb->dev) {
+	use_sched:
+		use_sched_skb = 1;
+		/* Note that the scheduler might return a different skb than
+		 * the one passed in.
+		 */
+		skb = sched_skb(sge, skb, credits);
+		if (!skb) {
+			spin_unlock(&q->lock);
+			return NETDEV_TX_OK;
 		}
+		pidx = q->pidx;
+		count = 1 + skb_shinfo(skb)->nr_frags;
+		count += compute_large_page_tx_descs(skb);
 	}
+
 	q->in_use += count;
 	genbit = q->genbit;
+	pidx = q->pidx;
 	q->pidx += count;
 	if (q->pidx >= q->size) {
 		q->pidx -= q->size;
@@ -1374,6 +1830,14 @@ static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
 			writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
 		}
 	}
+
+	if (use_sched_skb) {
+		if (spin_trylock(&q->lock)) {
+			credits = q->size - q->in_use;
+			skb = NULL;
+			goto use_sched;
+		}
+	}
 	return NETDEV_TX_OK;
 }
 
@@ -1402,8 +1866,10 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct sge *sge = adapter->sge;
 	struct cpl_tx_pkt *cpl;
 
-#ifdef NETIF_F_TSO
-	if (skb_is_gso(skb)) {
+	if (skb->protocol == htons(ETH_P_CPL5))
+		goto send;
+
+	if (skb_shinfo(skb)->gso_size) {
 		int eth_type;
 		struct cpl_tx_pkt_lso *hdr;
 
@@ -1422,9 +1888,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		hdr->len = htonl(skb->len - sizeof(*hdr));
 		cpl = (struct cpl_tx_pkt *)hdr;
 		sge->stats.tx_lso_pkts++;
-	} else
-#endif
-	{
+	} else {
 		/*
 	 	 * Packets shorter than ETH_HLEN can break the MAC, drop them
 		 * early.  Also, we may get oversized packets because some
@@ -1433,6 +1897,8 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 */
 		if (unlikely(skb->len < ETH_HLEN ||
 			     skb->len > dev->mtu + eth_hdr_len(skb->data))) {
+			pr_debug("%s: packet size %d hdr %d mtu%d\n", dev->name,
+				 skb->len, eth_hdr_len(skb->data), dev->mtu);
 			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
 		}
@@ -1442,10 +1908,12 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * components, such as pktgen, do not handle it right.
 		 * Complain when this happens but try to fix things up.
 		 */
-		if (unlikely(skb_headroom(skb) <
-			     dev->hard_header_len - ETH_HLEN)) {
+		if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) {
 			struct sk_buff *orig_skb = skb;
 
+			pr_debug("%s: headroom %d header_len %d\n", dev->name,
+				 skb_headroom(skb), dev->hard_header_len);
+
 			if (net_ratelimit())
 				printk(KERN_ERR "%s: inadequate headroom in "
 				       "Tx packet\n", dev->name);
@@ -1457,19 +1925,21 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
 		    skb->ip_summed == CHECKSUM_PARTIAL &&
-		    skb->nh.iph->protocol == IPPROTO_UDP)
+		    skb->nh.iph->protocol == IPPROTO_UDP) {
 			if (unlikely(skb_checksum_help(skb))) {
+				pr_debug("%s: unable to do udp checksum\n", dev->name);
 				dev_kfree_skb_any(skb);
 				return NETDEV_TX_OK;
 			}
+		}
 
 		/* Hmmm, assuming to catch the gratious arp... and we'll use
 		 * it to flush out stuck espi packets...
 		 */
-		if (unlikely(!adapter->sge->espibug_skb)) {
+		if ((unlikely(!adapter->sge->espibug_skb[dev->if_port]))) {
 			if (skb->protocol == htons(ETH_P_ARP) &&
 			    skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) {
-				adapter->sge->espibug_skb = skb;
+				adapter->sge->espibug_skb[dev->if_port] = skb;
 				/* We want to re-use this skb later. We
 				 * simply bump the reference count and it
 				 * will not be freed...
@@ -1499,6 +1969,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 		cpl->vlan_valid = 0;
 
+send:
 	dev->trans_start = jiffies;
 	return t1_sge_tx(skb, adapter, 0, dev);
 }
@@ -1518,10 +1989,9 @@ static void sge_tx_reclaim_cb(unsigned long data)
 			continue;
 
 		reclaim_completed_tx(sge, q);
-		if (i == 0 && q->in_use)   /* flush pending credits */
-			writel(F_CMDQ0_ENABLE,
-				sge->adapter->regs + A_SG_DOORBELL);
-
+		if (i == 0 && q->in_use) {    /* flush pending credits */
+			writel(F_CMDQ0_ENABLE, sge->adapter->regs + A_SG_DOORBELL);
+		}
 		spin_unlock(&q->lock);
 	}
 	mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
@@ -1568,11 +2038,20 @@ int t1_sge_configure(struct sge *sge, struct sge_params *p)
  */
 void t1_sge_stop(struct sge *sge)
 {
+	int i;
 	writel(0, sge->adapter->regs + A_SG_CONTROL);
-	(void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+	readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+
 	if (is_T2(sge->adapter))
 		del_timer_sync(&sge->espibug_timer);
+
 	del_timer_sync(&sge->tx_reclaim_timer);
+	if (sge->tx_sched)
+		tx_sched_stop(sge);
+
+	for (i = 0; i < MAX_NPORTS; i++)
+		if (sge->espibug_skb[i])
+			kfree_skb(sge->espibug_skb[i]);
 }
 
 /*
@@ -1585,7 +2064,7 @@ void t1_sge_start(struct sge *sge)
 
 	writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL);
 	doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE);
-	(void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+	readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
 
 	mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
 
@@ -1596,14 +2075,52 @@ void t1_sge_start(struct sge *sge)
 /*
  * Callback for the T2 ESPI 'stuck packet feature' workaorund
  */
-static void espibug_workaround(void *data)
+static void espibug_workaround_t204(unsigned long data)
 {
 	struct adapter *adapter = (struct adapter *)data;
 	struct sge *sge = adapter->sge;
+	unsigned int nports = adapter->params.nports;
+	u32 seop[MAX_NPORTS];
 
-	if (netif_running(adapter->port[0].dev)) {
-		struct sk_buff *skb = sge->espibug_skb;
+	if (adapter->open_device_map & PORT_MASK) {
+		int i;
+		if (t1_espi_get_mon_t204(adapter, &(seop[0]), 0) < 0) {
+			return;
+		}
+		for (i = 0; i < nports; i++) {
+	        	struct sk_buff *skb = sge->espibug_skb[i];
+			if ( (netif_running(adapter->port[i].dev)) &&
+			     !(netif_queue_stopped(adapter->port[i].dev)) &&
+			     (seop[i] && ((seop[i] & 0xfff) == 0)) &&
+			     skb ) {
+	                	if (!skb->cb[0]) {
+	                        	u8 ch_mac_addr[ETH_ALEN] =
+	                            	{0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
+	                        	memcpy(skb->data + sizeof(struct cpl_tx_pkt),
+	                               	ch_mac_addr, ETH_ALEN);
+	                        	memcpy(skb->data + skb->len - 10,
+						ch_mac_addr, ETH_ALEN);
+	                        	skb->cb[0] = 0xff;
+	                	}
+
+	                	/* bump the reference count to avoid freeing of
+	                 	 * the skb once the DMA has completed.
+	                 	 */
+	                	skb = skb_get(skb);
+	                	t1_sge_tx(skb, adapter, 0, adapter->port[i].dev);
+			}
+		}
+	}
+	mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
+}
+
+static void espibug_workaround(unsigned long data)
+{
+	struct adapter *adapter = (struct adapter *)data;
+	struct sge *sge = adapter->sge;
 
+	if (netif_running(adapter->port[0].dev)) {
+	        struct sk_buff *skb = sge->espibug_skb[0];
 	        u32 seop = t1_espi_get_mon(adapter, 0x930, 0);
 
 	        if ((seop & 0xfff0fff) == 0xfff && skb) {
@@ -1649,9 +2166,19 @@ struct sge * __devinit t1_sge_create(struct adapter *adapter,
 
 	if (is_T2(sge->adapter)) {
 		init_timer(&sge->espibug_timer);
-		sge->espibug_timer.function = (void *)&espibug_workaround;
+
+		if (adapter->params.nports > 1) {
+			tx_sched_init(sge);
+			sge->espibug_timer.function = espibug_workaround_t204;
+		} else {
+			sge->espibug_timer.function = espibug_workaround;
+		}
 		sge->espibug_timer.data = (unsigned long)sge->adapter;
+
 		sge->espibug_timeout = 1;
+		/* for T204, every 10ms */
+		if (adapter->params.nports > 1)
+			sge->espibug_timeout = HZ/100;
 	}
 	 
 
@@ -1659,7 +2186,14 @@ struct sge * __devinit t1_sge_create(struct adapter *adapter,
 	p->cmdQ_size[1] = SGE_CMDQ1_E_N;
 	p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE;
 	p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE;
+	if (sge->tx_sched) {
+		if (board_info(sge->adapter)->board == CHBT_BOARD_CHT204)
+			p->rx_coalesce_usecs = 15;
+		else
+			p->rx_coalesce_usecs = 50;
+	} else
 		p->rx_coalesce_usecs = 50;
+
 	p->coalesce_enable = 0;
 	p->sample_interval_usecs = 0;
 	p->polling = 0;

drivers/net/chelsio/sge.h

@@ -92,5 +92,9 @@ void t1_sge_intr_disable(struct sge *);
 void t1_sge_intr_clear(struct sge *);
 const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge);
 const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port);
+void t1_sched_set_max_avail_bytes(struct sge *, unsigned int);
+void t1_sched_set_drain_bits_per_us(struct sge *, unsigned int, unsigned int);
+unsigned int t1_sched_update_parms(struct sge *, unsigned int, unsigned int,
+			   unsigned int);
 
 #endif /* _CXGB_SGE_H_ */

drivers/net/chelsio/subr.c

@@ -43,6 +43,7 @@
 #include "gmac.h"
 #include "cphy.h"
 #include "sge.h"
+#include "tp.h"
 #include "espi.h"
 
 /**
@@ -78,7 +79,7 @@ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
 /*
  * Write a register over the TPI interface (unlocked and locked versions).
  */
-static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
+int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
 {
 	int tpi_busy;
 
@@ -98,16 +99,16 @@ int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
 {
 	int ret;
 
-	spin_lock(&(adapter)->tpi_lock);
+	spin_lock(&adapter->tpi_lock);
 	ret = __t1_tpi_write(adapter, addr, value);
-	spin_unlock(&(adapter)->tpi_lock);
+	spin_unlock(&adapter->tpi_lock);
 	return ret;
 }
 
 /*
  * Read a register over the TPI interface (unlocked and locked versions).
  */
-static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
+int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 {
 	int tpi_busy;
 
@@ -128,18 +129,26 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 {
 	int ret;
 
-	spin_lock(&(adapter)->tpi_lock);
+	spin_lock(&adapter->tpi_lock);
 	ret = __t1_tpi_read(adapter, addr, valp);
-	spin_unlock(&(adapter)->tpi_lock);
+	spin_unlock(&adapter->tpi_lock);
 	return ret;
 }
 
+/*
+ * Set a TPI parameter.
+ */
+static void t1_tpi_par(adapter_t *adapter, u32 value)
+{
+	writel(V_TPIPAR(value), adapter->regs + A_TPI_PAR);
+}
+
 /*
  * Called when a port's link settings change to propagate the new values to the
  * associated PHY and MAC.  After performing the common tasks it invokes an
  * OS-specific handler.
  */
-/* static */ void link_changed(adapter_t *adapter, int port_id)
+void t1_link_changed(adapter_t *adapter, int port_id)
 {
 	int link_ok, speed, duplex, fc;
 	struct cphy *phy = adapter->port[port_id].phy;
@@ -159,7 +168,7 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 		mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
 		lc->fc = (unsigned char)fc;
 	}
-	t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+	t1_link_negotiated(adapter, port_id, link_ok, speed, duplex, fc);
 }
 
 static int t1_pci_intr_handler(adapter_t *adapter)
@@ -217,7 +226,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 {
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 
-	spin_lock(&(adapter)->tpi_lock);
+	spin_lock(&adapter->tpi_lock);
 
 	/* Write the address we want. */
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
@@ -227,12 +236,13 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 
 	/* Write the operation we want. */
-	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
+	__t1_tpi_write(adapter,
+			A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 
 	/* Read the data. */
 	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
-	spin_unlock(&(adapter)->tpi_lock);
+	spin_unlock(&adapter->tpi_lock);
 	return 0;
 }
 
@@ -241,7 +251,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 {
 	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 
-	spin_lock(&(adapter)->tpi_lock);
+	spin_lock(&adapter->tpi_lock);
 
 	/* Write the address we want. */
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
@@ -254,7 +264,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
 	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
 	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
-	spin_unlock(&(adapter)->tpi_lock);
+	spin_unlock(&adapter->tpi_lock);
 	return 0;
 }
 
@@ -265,12 +275,25 @@ static struct mdio_ops mi1_mdio_ext_ops = {
 };
 
 enum {
+	CH_BRD_T110_1CU,
 	CH_BRD_N110_1F,
 	CH_BRD_N210_1F,
+	CH_BRD_T210_1F,
+	CH_BRD_T210_1CU,
+	CH_BRD_N204_4CU,
 };
 
 static struct board_info t1_board[] = {
 
+{ CHBT_BOARD_CHT110, 1/*ports#*/,
+  SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T1,
+  CHBT_MAC_PM3393, CHBT_PHY_MY3126,
+  125000000/*clk-core*/, 150000000/*clk-mc3*/, 125000000/*clk-mc4*/,
+  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/,
+  1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops,
+  &t1_my3126_ops, &mi1_mdio_ext_ops,
+  "Chelsio T110 1x10GBase-CX4 TOE" },
+
 { CHBT_BOARD_N110, 1/*ports#*/,
   SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
   CHBT_MAC_PM3393, CHBT_PHY_88X2010,
@@ -289,12 +312,36 @@ static struct board_info t1_board[] = {
   &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
   "Chelsio N210 1x10GBaseX NIC" },
 
+{ CHBT_BOARD_CHT210, 1/*ports#*/,
+  SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2,
+  CHBT_MAC_PM3393, CHBT_PHY_88X2010,
+  125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/,
+  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+  0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
+  &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
+  "Chelsio T210 1x10GBaseX TOE" },
+
+{ CHBT_BOARD_CHT210, 1/*ports#*/,
+  SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2,
+  CHBT_MAC_PM3393, CHBT_PHY_MY3126,
+  125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/,
+  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/,
+  1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops,
+  &t1_my3126_ops, &mi1_mdio_ext_ops,
+  "Chelsio T210 1x10GBase-CX4 TOE" },
+
+
 };
 
 struct pci_device_id t1_pci_tbl[] = {
+	CH_DEVICE(8, 0, CH_BRD_T110_1CU),
+	CH_DEVICE(8, 1, CH_BRD_T110_1CU),
 	CH_DEVICE(7, 0, CH_BRD_N110_1F),
 	CH_DEVICE(10, 1, CH_BRD_N210_1F),
-	{ 0, }
+	CH_DEVICE(11, 1, CH_BRD_T210_1F),
+	CH_DEVICE(14, 1, CH_BRD_T210_1CU),
+	CH_DEVICE(16, 1, CH_BRD_N204_4CU),
+	{ 0 }
 };
 
 MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
@@ -390,10 +437,15 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
 	if (lc->supported & SUPPORTED_Autoneg) {
 		lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
 		if (fc) {
+			if (fc == ((PAUSE_RX | PAUSE_TX) &
+				   (mac->adapter->params.nports < 2)))
+				lc->advertising |= ADVERTISED_PAUSE;
+			else {
 				lc->advertising |= ADVERTISED_ASYM_PAUSE;
-			if (fc == (PAUSE_RX | PAUSE_TX))
+				if (fc == PAUSE_RX)
 					lc->advertising |= ADVERTISED_PAUSE;
 			}
+		}
 		phy->ops->advertise(phy, lc->advertising);
 
 		if (lc->autoneg == AUTONEG_DISABLE) {
@@ -403,11 +455,15 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
 			mac->ops->set_speed_duplex_fc(mac, lc->speed,
 						      lc->duplex, fc);
 			/* Also disables autoneg */
+			phy->state = PHY_AUTONEG_RDY;
 			phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
 			phy->ops->reset(phy, 0);
-		} else
+		} else {
+			phy->state = PHY_AUTONEG_EN;
 			phy->ops->autoneg_enable(phy); /* also resets PHY */
+		}
 	} else {
+		phy->state = PHY_AUTONEG_RDY;
 		mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
 		lc->fc = (unsigned char)fc;
 		phy->ops->reset(phy, 0);
@@ -418,7 +474,7 @@ int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
 /*
  * External interrupt handler for boards using elmer0.
  */
-int elmer0_ext_intr_handler(adapter_t *adapter)
+int t1_elmer0_ext_intr_handler(adapter_t *adapter)
 {
 	struct cphy *phy;
 	int phy_cause;
@@ -427,13 +483,32 @@ int elmer0_ext_intr_handler(adapter_t *adapter)
 	t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
 
 	switch (board_info(adapter)->board) {
+	case CHBT_BOARD_CHT210:
 	case CHBT_BOARD_N210:
 	case CHBT_BOARD_N110:
 		if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
 			phy = adapter->port[0].phy;
 			phy_cause = phy->ops->interrupt_handler(phy);
 			if (phy_cause & cphy_cause_link_change)
-				link_changed(adapter, 0);
+				t1_link_changed(adapter, 0);
+		}
+		break;
+	case CHBT_BOARD_8000:
+	case CHBT_BOARD_CHT110:
+    		CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
+		       cause);
+		if (cause & ELMER0_GP_BIT1) {        /* PMC3393 INTB */
+			struct cmac *mac = adapter->port[0].mac;
+
+			mac->ops->interrupt_handler(mac);
+		}
+		if (cause & ELMER0_GP_BIT5) {        /* XPAK MOD_DETECT */
+			u32 mod_detect;
+
+			t1_tpi_read(adapter,
+					A_ELMER0_GPI_STAT, &mod_detect);
+	    		CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
+			       mod_detect ? "removed" : "inserted");
     		}
 		break;
 	}
@@ -445,11 +520,11 @@ int elmer0_ext_intr_handler(adapter_t *adapter)
 void t1_interrupts_enable(adapter_t *adapter)
 {
 	unsigned int i;
-	u32 pl_intr;
 
-	adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
+	adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP;
 
 	t1_sge_intr_enable(adapter->sge);
+	t1_tp_intr_enable(adapter->tp);
 	if (adapter->espi) {
 		adapter->slow_intr_mask |= F_PL_INTR_ESPI;
 		t1_espi_intr_enable(adapter->espi);
@@ -462,7 +537,8 @@ void t1_interrupts_enable(adapter_t *adapter)
 	}
 
 	/* Enable PCIX & external chip interrupts on ASIC boards. */
-	pl_intr = readl(adapter->regs + A_PL_ENABLE);
+	if (t1_is_asic(adapter)) {
+		u32 pl_intr = readl(adapter->regs + A_PL_ENABLE);
 
 		/* PCI-X interrupts */
 		pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
@@ -471,6 +547,7 @@ void t1_interrupts_enable(adapter_t *adapter)
 		adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 		pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 		writel(pl_intr, adapter->regs + A_PL_ENABLE);
+	}
 }
 
 /* Disables all interrupts. */
@@ -479,6 +556,7 @@ void t1_interrupts_disable(adapter_t* adapter)
 	unsigned int i;
 
 	t1_sge_intr_disable(adapter->sge);
+	t1_tp_intr_disable(adapter->tp);
 	if (adapter->espi)
 		t1_espi_intr_disable(adapter->espi);
 
@@ -489,6 +567,7 @@ void t1_interrupts_disable(adapter_t* adapter)
 	}
 
 	/* Disable PCIX & external chip interrupts. */
+	if (t1_is_asic(adapter))
 	    	writel(0, adapter->regs + A_PL_ENABLE);
 
 	/* PCI-X interrupts */
@@ -501,10 +580,9 @@ void t1_interrupts_disable(adapter_t* adapter)
 void t1_interrupts_clear(adapter_t* adapter)
 {
 	unsigned int i;
-	u32 pl_intr;
-
 
 	t1_sge_intr_clear(adapter->sge);
+	t1_tp_intr_clear(adapter->tp);
 	if (adapter->espi)
 		t1_espi_intr_clear(adapter->espi);
 
@@ -515,10 +593,12 @@ void t1_interrupts_clear(adapter_t* adapter)
 	}
 
 	/* Enable interrupts for external devices. */
-	pl_intr = readl(adapter->regs + A_PL_CAUSE);
+	if (t1_is_asic(adapter)) {
+		u32 pl_intr = readl(adapter->regs + A_PL_CAUSE);
 
 		writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
 		       adapter->regs + A_PL_CAUSE);
+	}
 
 	/* PCI-X interrupts */
 	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
@@ -527,7 +607,7 @@ void t1_interrupts_clear(adapter_t* adapter)
 /*
  * Slow path interrupt handler for ASICs.
  */
-int t1_slow_intr_handler(adapter_t *adapter)
+static int asic_slow_intr(adapter_t *adapter)
 {
 	u32 cause = readl(adapter->regs + A_PL_CAUSE);
 
@@ -536,89 +616,50 @@ int t1_slow_intr_handler(adapter_t *adapter)
 		return 0;
 	if (cause & F_PL_INTR_SGE_ERR)
 		t1_sge_intr_error_handler(adapter->sge);
+	if (cause & F_PL_INTR_TP)
+		t1_tp_intr_handler(adapter->tp);
 	if (cause & F_PL_INTR_ESPI)
 		t1_espi_intr_handler(adapter->espi);
 	if (cause & F_PL_INTR_PCIX)
 		t1_pci_intr_handler(adapter);
 	if (cause & F_PL_INTR_EXT)
-		t1_elmer0_ext_intr(adapter);
+		t1_elmer0_ext_intr_handler(adapter);
 
 	/* Clear the interrupts just processed. */
 	writel(cause, adapter->regs + A_PL_CAUSE);
-	(void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
+	readl(adapter->regs + A_PL_CAUSE); /* flush writes */
 	return 1;
 }
 
-/* Pause deadlock avoidance parameters */
-#define DROP_MSEC 16
-#define DROP_PKTS_CNT  1
-
-static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
-{
-	u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
-
-	if (enable)
-		val |= csum_bit;
-	else
-		val &= ~csum_bit;
-	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
-}
-
-void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
-{
-	set_csum_offload(adapter, F_IP_CSUM, enable);
-}
-
-void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
-{
-	set_csum_offload(adapter, F_UDP_CSUM, enable);
-}
-
-void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
+int t1_slow_intr_handler(adapter_t *adapter)
 {
-	set_csum_offload(adapter, F_TCP_CSUM, enable);
+	return asic_slow_intr(adapter);
 }
 
-static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
+/* Power sequencing is a work-around for Intel's XPAKs. */
+static void power_sequence_xpak(adapter_t* adapter)
 {
-	u32 val;
+    	u32 mod_detect;
+    	u32 gpo;
 
-	val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
-	      F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
-	val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
-	       F_TP_IN_ESPI_CHECK_TCP_CSUM;
-	writel(val, adapter->regs + A_TP_IN_CONFIG);
-	writel(F_TP_OUT_CSPI_CPL |
-	       F_TP_OUT_ESPI_ETHERNET |
-	       F_TP_OUT_ESPI_GENERATE_IP_CSUM |
-	       F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
-	       adapter->regs + A_TP_OUT_CONFIG);
-
-	val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
-	val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
-	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
-
-	/*
-	 * Enable pause frame deadlock prevention.
-	 */
-	if (is_T2(adapter)) {
-		u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
-
-		writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
-		       V_DROP_TICKS_CNT(drop_ticks) |
-		       V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
-		       adapter->regs + A_TP_TX_DROP_CONFIG);
+    	/* Check for XPAK */
+    	t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
+	if (!(ELMER0_GP_BIT5 & mod_detect)) {
+		/* XPAK is present */
+		t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
+		gpo |= ELMER0_GP_BIT18;
+		t1_tpi_write(adapter, A_ELMER0_GPO, gpo);
 	}
-
-	writel(F_TP_RESET, adapter->regs + A_TP_RESET);
 }
 
 int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
 			       struct adapter_params *p)
 {
 	p->chip_version = bi->chip_term;
+	p->is_asic = (p->chip_version != CHBT_TERM_FPGA);
 	if (p->chip_version == CHBT_TERM_T1 ||
-	    p->chip_version == CHBT_TERM_T2) {
+	    p->chip_version == CHBT_TERM_T2 ||
+	    p->chip_version == CHBT_TERM_FPGA) {
 		u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
 
 		val = G_TP_PC_REV(val);
@@ -640,11 +681,23 @@ int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
 static int board_init(adapter_t *adapter, const struct board_info *bi)
 {
 	switch (bi->board) {
+	case CHBT_BOARD_8000:
 	case CHBT_BOARD_N110:
 	case CHBT_BOARD_N210:
-		writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
+	case CHBT_BOARD_CHT210:
+	case CHBT_BOARD_COUGAR:
+    		t1_tpi_par(adapter, 0xf);
     		t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
 		break;
+	case CHBT_BOARD_CHT110:
+    		t1_tpi_par(adapter, 0xf);
+    		t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
+
+    		/* TBD XXX Might not need.  This fixes a problem
+     		 *         described in the Intel SR XPAK errata.
+     		 */
+    		power_sequence_xpak(adapter);
+		break;
 	}
 	return 0;
 }
@@ -670,7 +723,8 @@ int t1_init_hw_modules(adapter_t *adapter)
 					  bi->espi_nports))
 		goto out_err;
 
-	t1_tp_reset(adapter, bi->clock_core);
+	if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core))
+		goto out_err;
 
 	err = t1_sge_configure(adapter->sge, &adapter->params.sge);
 	if (err)
@@ -714,6 +768,8 @@ void t1_free_sw_modules(adapter_t *adapter)
 
 	if (adapter->sge)
 		t1_sge_destroy(adapter->sge);
+	if (adapter->tp)
+		t1_tp_destroy(adapter->tp);
 	if (adapter->espi)
 		t1_espi_destroy(adapter->espi);
 }
@@ -762,6 +818,13 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		goto error;
 	}
 
+	adapter->tp = t1_tp_create(adapter, &adapter->params.tp);
+	if (!adapter->tp) {
+		CH_ERR("%s: TP initialization failed\n",
+		       adapter->name);
+		goto error;
+	}
+
 	board_init(adapter, bi);
 	bi->mdio_ops->init(adapter, bi);
 	if (bi->gphy->reset)
@@ -793,7 +856,9 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 		 * Get the port's MAC addresses either from the EEPROM if one
 		 * exists or the one hardcoded in the MAC.
 		 */
-		if (vpd_macaddress_get(adapter, i, hw_addr)) {
+		if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY)
+			mac->ops->macaddress_get(mac, hw_addr);
+		else if (vpd_macaddress_get(adapter, i, hw_addr)) {
 			CH_ERR("%s: could not read MAC address from VPD ROM\n",
 			       adapter->port[i].dev->name);
 			goto error;
@@ -806,7 +871,7 @@ int __devinit t1_init_sw_modules(adapter_t *adapter,
 	t1_interrupts_clear(adapter);
 	return 0;
 
- error:
+error:
 	t1_free_sw_modules(adapter);
 	return -1;
 }

drivers/net/chelsio/suni1x10gexp_regs.h

@@ -32,6 +32,30 @@
 #ifndef _CXGB_SUNI1x10GEXP_REGS_H_
 #define _CXGB_SUNI1x10GEXP_REGS_H_
 
+/*
+** Space allocated for each Exact Match Filter
+**     There are 8 filter configurations
+*/
+#define SUNI1x10GEXP_REG_SIZEOF_MAC_FILTER 0x0003
+
+#define mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)       ( (filterId) * SUNI1x10GEXP_REG_SIZEOF_MAC_FILTER )
+
+/*
+** Space allocated for VLAN-Id Filter
+**      There are 8 filter configurations
+*/
+#define SUNI1x10GEXP_REG_SIZEOF_MAC_VID_FILTER 0x0001
+
+#define mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId)   ( (filterId) * SUNI1x10GEXP_REG_SIZEOF_MAC_VID_FILTER )
+
+/*
+** Space allocated for each MSTAT Counter
+*/
+#define SUNI1x10GEXP_REG_SIZEOF_MSTAT_COUNT 0x0004
+
+#define mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId)       ( (countId) * SUNI1x10GEXP_REG_SIZEOF_MSTAT_COUNT )
+
+
 /******************************************************************************/
 /** S/UNI-1x10GE-XP REGISTER ADDRESS MAP                                     **/
 /******************************************************************************/
@@ -39,33 +63,125 @@
 /* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit        */
 /******************************************************************************/
 
+
+#define SUNI1x10GEXP_REG_IDENTIFICATION                                  0x0000
+#define SUNI1x10GEXP_REG_PRODUCT_REVISION                                0x0001
+#define SUNI1x10GEXP_REG_CONFIG_AND_RESET_CONTROL                        0x0002
+#define SUNI1x10GEXP_REG_LOOPBACK_MISC_CTRL                              0x0003
 #define SUNI1x10GEXP_REG_DEVICE_STATUS                                   0x0004
+#define SUNI1x10GEXP_REG_GLOBAL_PERFORMANCE_MONITOR_UPDATE               0x0005
+
+#define SUNI1x10GEXP_REG_MDIO_COMMAND                                    0x0006
+#define SUNI1x10GEXP_REG_MDIO_INTERRUPT_ENABLE                           0x0007
+#define SUNI1x10GEXP_REG_MDIO_INTERRUPT_STATUS                           0x0008
+#define SUNI1x10GEXP_REG_MMD_PHY_ADDRESS                                 0x0009
+#define SUNI1x10GEXP_REG_MMD_CONTROL_ADDRESS_DATA                        0x000A
+#define SUNI1x10GEXP_REG_MDIO_READ_STATUS_DATA                           0x000B
+
+#define SUNI1x10GEXP_REG_OAM_INTF_CTRL                                   0x000C
 #define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS                         0x000D
 #define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE                         0x000E
+#define SUNI1x10GEXP_REG_FREE                                            0x000F
+
+#define SUNI1x10GEXP_REG_XTEF_MISC_CTRL                                  0x0010
+#define SUNI1x10GEXP_REG_XRF_MISC_CTRL                                   0x0011
+
+#define SUNI1x10GEXP_REG_SERDES_3125_CONFIG_1                            0x0100
+#define SUNI1x10GEXP_REG_SERDES_3125_CONFIG_2                            0x0101
 #define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE                    0x0102
+#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_VISIBLE                   0x0103
 #define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS                    0x0104
+#define SUNI1x10GEXP_REG_SERDES_3125_TEST_CONFIG                         0x0107
+
 #define SUNI1x10GEXP_REG_RXXG_CONFIG_1                                   0x2040
+#define SUNI1x10GEXP_REG_RXXG_CONFIG_2                                   0x2041
 #define SUNI1x10GEXP_REG_RXXG_CONFIG_3                                   0x2042
 #define SUNI1x10GEXP_REG_RXXG_INTERRUPT                                  0x2043
 #define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH                           0x2045
 #define SUNI1x10GEXP_REG_RXXG_SA_15_0                                    0x2046
 #define SUNI1x10GEXP_REG_RXXG_SA_31_16                                   0x2047
 #define SUNI1x10GEXP_REG_RXXG_SA_47_32                                   0x2048
+#define SUNI1x10GEXP_REG_RXXG_RECEIVE_FIFO_THRESHOLD                     0x2049
+#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_LOW(filterId) (0x204A + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
+#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_MID(filterId) (0x204B + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
+#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_HIGH(filterId)(0x204C + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
+#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId)      (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId)
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_LOW                     0x204A
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_MID                     0x204B
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_HIGH                    0x204C
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW                     0x204D
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID                     0x204E
 #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH                    0x204F
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_LOW                     0x2050
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_MID                     0x2051
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_2_HIGH                    0x2052
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_LOW                     0x2053
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_MID                     0x2054
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_3_HIGH                    0x2055
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_LOW                     0x2056
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_MID                     0x2057
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_4_HIGH                    0x2058
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_LOW                     0x2059
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_MID                     0x205A
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_5_HIGH                    0x205B
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_LOW                     0x205C
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_MID                     0x205D
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_6_HIGH                    0x205E
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_LOW                     0x205F
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_MID                     0x2060
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_7_HIGH                    0x2061
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_0                          0x2062
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_1                          0x2063
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_2                          0x2064
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_3                          0x2065
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_4                          0x2066
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_5                          0x2067
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_6                          0x2068
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID_7                          0x2069
 #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW                         0x206A
 #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW                      0x206B
 #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH                     0x206C
 #define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH                        0x206D
 #define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0                   0x206E
+#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_1                   0x206F
 #define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2                   0x2070
+
+#define SUNI1x10GEXP_REG_XRF_PATTERN_GEN_CTRL                            0x2081
+#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_0                       0x2084
+#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_1                       0x2085
+#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_2                       0x2086
+#define SUNI1x10GEXP_REG_XRF_8BTB_ERR_COUNT_LANE_3                       0x2087
 #define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE                            0x2088
 #define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS                            0x2089
+#define SUNI1x10GEXP_REG_XRF_ERR_STATUS                                  0x208A
 #define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE                       0x208B
 #define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS                       0x208C
+#define SUNI1x10GEXP_REG_XRF_CODE_ERR_THRES                              0x2092
+
+#define SUNI1x10GEXP_REG_RXOAM_CONFIG                                    0x20C0
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_CONFIG                           0x20C1
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_CONFIG                           0x20C2
+#define SUNI1x10GEXP_REG_RXOAM_CONFIG_2                                  0x20C3
+#define SUNI1x10GEXP_REG_RXOAM_HEC_CONFIG                                0x20C4
+#define SUNI1x10GEXP_REG_RXOAM_HEC_ERR_THRES                             0x20C5
 #define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE                          0x20C7
 #define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS                          0x20C8
+#define SUNI1x10GEXP_REG_RXOAM_STATUS                                    0x20C9
+#define SUNI1x10GEXP_REG_RXOAM_HEC_ERR_COUNT                             0x20CA
+#define SUNI1x10GEXP_REG_RXOAM_FIFO_OVERFLOW_COUNT                       0x20CB
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_COUNT_LSB                 0x20CC
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_COUNT_MSB                 0x20CD
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_MISMATCH_COUNT_LSB               0x20CE
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_1_MISMATCH_COUNT_MSB               0x20CF
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_MISMATCH_COUNT_LSB               0x20D0
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_2_MISMATCH_COUNT_MSB               0x20D1
+#define SUNI1x10GEXP_REG_RXOAM_OAM_EXTRACT_COUNT_LSB                     0x20D2
+#define SUNI1x10GEXP_REG_RXOAM_OAM_EXTRACT_COUNT_MSB                     0x20D3
+#define SUNI1x10GEXP_REG_RXOAM_MINI_PACKET_COUNT_LSB                     0x20D4
+#define SUNI1x10GEXP_REG_RXOAM_MINI_PACKET_COUNT_MSB                     0x20D5
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_THRES_LSB                 0x20D6
+#define SUNI1x10GEXP_REG_RXOAM_FILTER_MISMATCH_THRES_MSB                 0x20D7
+
 #define SUNI1x10GEXP_REG_MSTAT_CONTROL                                   0x2100
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0                        0x2101
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1                        0x2102
@@ -75,50 +191,321 @@
 #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1                          0x2106
 #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2                          0x2107
 #define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3                          0x2108
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_ADDRESS                     0x2109
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_LOW                    0x210A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_MIDDLE                 0x210B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_WRITE_DATA_HIGH                   0x210C
+#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_LOW(countId)   (0x2110 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId))
+#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_MID(countId)   (0x2111 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId))
+#define mSUNI1x10GEXP_REG_MSTAT_COUNTER_HIGH(countId)  (0x2112 + mSUNI1x10GEXP_MSTAT_COUNT_OFFSET(countId))
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW                             0x2110
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_MID                             0x2111
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_HIGH                            0x2112
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_RESVD                           0x2113
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW                             0x2114
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_MID                             0x2115
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_HIGH                            0x2116
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_RESVD                           0x2117
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_LOW                             0x2118
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_MID                             0x2119
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_HIGH                            0x211A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_2_RESVD                           0x211B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_LOW                             0x211C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_MID                             0x211D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_HIGH                            0x211E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_3_RESVD                           0x211F
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW                             0x2120
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_MID                             0x2121
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_HIGH                            0x2122
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_RESVD                           0x2123
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW                             0x2124
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_MID                             0x2125
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_HIGH                            0x2126
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_RESVD                           0x2127
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW                             0x2128
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_MID                             0x2129
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_HIGH                            0x212A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_RESVD                           0x212B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_LOW                             0x212C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_MID                             0x212D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_HIGH                            0x212E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_7_RESVD                           0x212F
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW                             0x2130
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_MID                             0x2131
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_HIGH                            0x2132
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_RESVD                           0x2133
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_LOW                             0x2134
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_MID                             0x2135
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_HIGH                            0x2136
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_9_RESVD                           0x2137
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW                            0x2138
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_MID                            0x2139
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_HIGH                           0x213A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_RESVD                          0x213B
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW                            0x213C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_MID                            0x213D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_HIGH                           0x213E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_RESVD                          0x213F
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW                            0x2140
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_MID                            0x2141
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_HIGH                           0x2142
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_RESVD                          0x2143
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW                            0x2144
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_MID                            0x2145
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_HIGH                           0x2146
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_RESVD                          0x2147
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_LOW                            0x2148
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_MID                            0x2149
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_HIGH                           0x214A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_14_RESVD                          0x214B
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW                            0x214C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_MID                            0x214D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_HIGH                           0x214E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_RESVD                          0x214F
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW                            0x2150
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_MID                            0x2151
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_HIGH                           0x2152
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_RESVD                          0x2153
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW                            0x2154
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_MID                            0x2155
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_HIGH                           0x2156
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_RESVD                          0x2157
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW                            0x2158
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_MID                            0x2159
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_HIGH                           0x215A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_RESVD                          0x215B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_LOW                            0x215C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_MID                            0x215D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_HIGH                           0x215E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_19_RESVD                          0x215F
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_LOW                            0x2160
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_MID                            0x2161
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_HIGH                           0x2162
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_20_RESVD                          0x2163
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_LOW                            0x2164
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_MID                            0x2165
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_HIGH                           0x2166
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_21_RESVD                          0x2167
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_LOW                            0x2168
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_MID                            0x2169
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_HIGH                           0x216A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_22_RESVD                          0x216B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_LOW                            0x216C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_MID                            0x216D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_HIGH                           0x216E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_23_RESVD                          0x216F
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_LOW                            0x2170
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_MID                            0x2171
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_HIGH                           0x2172
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_24_RESVD                          0x2173
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_LOW                            0x2174
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_MID                            0x2175
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_HIGH                           0x2176
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_25_RESVD                          0x2177
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_LOW                            0x2178
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_MID                            0x2179
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_HIGH                           0x217a
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_26_RESVD                          0x217b
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_LOW                            0x217c
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_MID                            0x217d
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_HIGH                           0x217e
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_27_RESVD                          0x217f
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_LOW                            0x2180
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_MID                            0x2181
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_HIGH                           0x2182
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_28_RESVD                          0x2183
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_LOW                            0x2184
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_MID                            0x2185
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_HIGH                           0x2186
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_29_RESVD                          0x2187
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_LOW                            0x2188
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_MID                            0x2189
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_HIGH                           0x218A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_30_RESVD                          0x218B
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_LOW                            0x218C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_MID                            0x218D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_HIGH                           0x218E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_31_RESVD                          0x218F
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_LOW                            0x2190
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_MID                            0x2191
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_HIGH                           0x2192
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_32_RESVD                          0x2193
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW                            0x2194
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_MID                            0x2195
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_HIGH                           0x2196
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_RESVD                          0x2197
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_LOW                            0x2198
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_MID                            0x2199
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_HIGH                           0x219A
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_34_RESVD                          0x219B
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW                            0x219C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_MID                            0x219D
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_HIGH                           0x219E
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_RESVD                          0x219F
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW                            0x21A0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_MID                            0x21A1
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_HIGH                           0x21A2
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_RESVD                          0x21A3
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_LOW                            0x21A4
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_MID                            0x21A5
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_HIGH                           0x21A6
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_37_RESVD                          0x21A7
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW                            0x21A8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_MID                            0x21A9
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_HIGH                           0x21AA
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_RESVD                          0x21AB
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_LOW                            0x21AC
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_MID                            0x21AD
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_HIGH                           0x21AE
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_39_RESVD                          0x21AF
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW                            0x21B0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_MID                            0x21B1
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_HIGH                           0x21B2
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_RESVD                          0x21B3
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_LOW                            0x21B4
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_MID                            0x21B5
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_HIGH                           0x21B6
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_41_RESVD                          0x21B7
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW                            0x21B8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_MID                            0x21B9
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_HIGH                           0x21BA
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_RESVD                          0x21BB
 #define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW                            0x21BC
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_MID                            0x21BD
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_HIGH                           0x21BE
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_RESVD                          0x21BF
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_LOW                            0x21C0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_MID                            0x21C1
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_HIGH                           0x21C2
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_44_RESVD                          0x21C3
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_LOW                            0x21C4
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_MID                            0x21C5
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_HIGH                           0x21C6
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_45_RESVD                          0x21C7
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_LOW                            0x21C8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_MID                            0x21C9
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_HIGH                           0x21CA
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_46_RESVD                          0x21CB
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_LOW                            0x21CC
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_MID                            0x21CD
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_HIGH                           0x21CE
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_47_RESVD                          0x21CF
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_LOW                            0x21D0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_MID                            0x21D1
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_HIGH                           0x21D2
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_48_RESVD                          0x21D3
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_LOW                            0x21D4
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_MID                            0x21D5
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_HIGH                           0x21D6
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_49_RESVD                          0x21D7
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_LOW                            0x21D8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_MID                            0x21D9
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_HIGH                           0x21DA
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_50_RESVD                          0x21DB
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_LOW                            0x21DC
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_MID                            0x21DD
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_HIGH                           0x21DE
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_51_RESVD                          0x21DF
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_LOW                            0x21E0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_MID                            0x21E1
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_HIGH                           0x21E2
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_52_RESVD                          0x21E3
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_LOW                            0x21E4
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_MID                            0x21E5
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_53_HIGH                           0x21E6
+#define SUNI1x10GEXP_CNTR_MAC_ETHERNET_NUM                               51
+
+#define SUNI1x10GEXP_REG_IFLX_GLOBAL_CONFIG                              0x2200
+#define SUNI1x10GEXP_REG_IFLX_CHANNEL_PROVISION                          0x2201
 #define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE                       0x2209
 #define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT                    0x220A
+#define SUNI1x10GEXP_REG_IFLX_INDIR_CHANNEL_ADDRESS                      0x220D
+#define SUNI1x10GEXP_REG_IFLX_INDIR_LOGICAL_FIFO_LOW_LIMIT_PROVISION     0x220E
+#define SUNI1x10GEXP_REG_IFLX_INDIR_LOGICAL_FIFO_HIGH_LIMIT              0x220F
+#define SUNI1x10GEXP_REG_IFLX_INDIR_FULL_ALMOST_FULL_STATUS_LIMIT        0x2210
+#define SUNI1x10GEXP_REG_IFLX_INDIR_EMPTY_ALMOST_EMPTY_STATUS_LIMIT      0x2211
+
+#define SUNI1x10GEXP_REG_PL4MOS_CONFIG                                   0x2240
+#define SUNI1x10GEXP_REG_PL4MOS_MASK                                     0x2241
+#define SUNI1x10GEXP_REG_PL4MOS_FAIRNESS_MASKING                         0x2242
+#define SUNI1x10GEXP_REG_PL4MOS_MAXBURST1                                0x2243
+#define SUNI1x10GEXP_REG_PL4MOS_MAXBURST2                                0x2244
+#define SUNI1x10GEXP_REG_PL4MOS_TRANSFER_SIZE                            0x2245
+
+#define SUNI1x10GEXP_REG_PL4ODP_CONFIG                                   0x2280
 #define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK                           0x2282
 #define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT                                0x2283
+#define SUNI1x10GEXP_REG_PL4ODP_CONFIG_MAX_T                             0x2284
+
 #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS                        0x2300
 #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE                        0x2301
 #define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK                          0x2302
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_LIMITS                        0x2303
+#define SUNI1x10GEXP_REG_PL4IO_CALENDAR_REPETITIONS                      0x2304
+#define SUNI1x10GEXP_REG_PL4IO_CONFIG                                    0x2305
+
 #define SUNI1x10GEXP_REG_TXXG_CONFIG_1                                   0x3040
+#define SUNI1x10GEXP_REG_TXXG_CONFIG_2                                   0x3041
 #define SUNI1x10GEXP_REG_TXXG_CONFIG_3                                   0x3042
 #define SUNI1x10GEXP_REG_TXXG_INTERRUPT                                  0x3043
+#define SUNI1x10GEXP_REG_TXXG_STATUS                                     0x3044
 #define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE                             0x3045
+#define SUNI1x10GEXP_REG_TXXG_MIN_FRAME_SIZE                             0x3046
 #define SUNI1x10GEXP_REG_TXXG_SA_15_0                                    0x3047
 #define SUNI1x10GEXP_REG_TXXG_SA_31_16                                   0x3048
 #define SUNI1x10GEXP_REG_TXXG_SA_47_32                                   0x3049
+#define SUNI1x10GEXP_REG_TXXG_PAUSE_TIMER                                0x304D
+#define SUNI1x10GEXP_REG_TXXG_PAUSE_TIMER_INTERVAL                       0x304E
+#define SUNI1x10GEXP_REG_TXXG_FILTER_ERROR_COUNTER                       0x3051
+#define SUNI1x10GEXP_REG_TXXG_PAUSE_QUANTUM_CONFIG                       0x3052
+
+#define SUNI1x10GEXP_REG_XTEF_CTRL                                       0x3080
 #define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS                           0x3084
 #define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE                           0x3085
+#define SUNI1x10GEXP_REG_XTEF_VISIBILITY                                 0x3086
+
+#define SUNI1x10GEXP_REG_TXOAM_OAM_CONFIG                                0x30C0
+#define SUNI1x10GEXP_REG_TXOAM_MINI_RATE_CONFIG                          0x30C1
+#define SUNI1x10GEXP_REG_TXOAM_MINI_GAP_FIFO_CONFIG                      0x30C2
+#define SUNI1x10GEXP_REG_TXOAM_P1P2_STATIC_VALUES                        0x30C3
+#define SUNI1x10GEXP_REG_TXOAM_P3P4_STATIC_VALUES                        0x30C4
+#define SUNI1x10GEXP_REG_TXOAM_P5P6_STATIC_VALUES                        0x30C5
 #define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE                          0x30C6
 #define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS                          0x30C7
+#define SUNI1x10GEXP_REG_TXOAM_INSERT_COUNT_LSB                          0x30C8
+#define SUNI1x10GEXP_REG_TXOAM_INSERT_COUNT_MSB                          0x30C9
+#define SUNI1x10GEXP_REG_TXOAM_OAM_MINI_COUNT_LSB                        0x30CA
+#define SUNI1x10GEXP_REG_TXOAM_OAM_MINI_COUNT_MSB                        0x30CB
+#define SUNI1x10GEXP_REG_TXOAM_P1P2_MINI_MASK                            0x30CC
+#define SUNI1x10GEXP_REG_TXOAM_P3P4_MINI_MASK                            0x30CD
+#define SUNI1x10GEXP_REG_TXOAM_P5P6_MINI_MASK                            0x30CE
+#define SUNI1x10GEXP_REG_TXOAM_COSET                                     0x30CF
+#define SUNI1x10GEXP_REG_TXOAM_EMPTY_FIFO_INS_OP_CNT_LSB                 0x30D0
+#define SUNI1x10GEXP_REG_TXOAM_EMPTY_FIFO_INS_OP_CNT_MSB                 0x30D1
+#define SUNI1x10GEXP_REG_TXOAM_STATIC_VALUE_MINI_COUNT_LSB               0x30D2
+#define SUNI1x10GEXP_REG_TXOAM_STATIC_VALUE_MINI_COUNT_MSB               0x30D3
+
+
+#define SUNI1x10GEXP_REG_EFLX_GLOBAL_CONFIG                              0x3200
+#define SUNI1x10GEXP_REG_EFLX_ERCU_GLOBAL_STATUS                         0x3201
+#define SUNI1x10GEXP_REG_EFLX_INDIR_CHANNEL_ADDRESS                      0x3202
+#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_LOW_LIMIT                       0x3203
+#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_HIGH_LIMIT                      0x3204
+#define SUNI1x10GEXP_REG_EFLX_INDIR_FULL_ALMOST_FULL_STATUS_AND_LIMIT    0x3205
+#define SUNI1x10GEXP_REG_EFLX_INDIR_EMPTY_ALMOST_EMPTY_STATUS_AND_LIMIT  0x3206
+#define SUNI1x10GEXP_REG_EFLX_INDIR_FIFO_CUT_THROUGH_THRESHOLD           0x3207
 #define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE                 0x320C
 #define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION             0x320D
+#define SUNI1x10GEXP_REG_EFLX_CHANNEL_PROVISION                          0x3210
+
+#define SUNI1x10GEXP_REG_PL4IDU_CONFIG                                   0x3280
 #define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK                           0x3282
 #define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT                                0x3283
 
+
+/*----------------------------------------*/
+#define SUNI1x10GEXP_REG_MAX_OFFSET                                      0x3480
+
 /******************************************************************************/
 /*                 -- End register offset definitions --                      */
 /******************************************************************************/
@@ -127,6 +514,81 @@
 /** SUNI-1x10GE-XP REGISTER BIT MASKS                                        **/
 /******************************************************************************/
 
+#define SUNI1x10GEXP_BITMSK_BITS_1   0x00001
+#define SUNI1x10GEXP_BITMSK_BITS_2   0x00003
+#define SUNI1x10GEXP_BITMSK_BITS_3   0x00007
+#define SUNI1x10GEXP_BITMSK_BITS_4   0x0000f
+#define SUNI1x10GEXP_BITMSK_BITS_5   0x0001f
+#define SUNI1x10GEXP_BITMSK_BITS_6   0x0003f
+#define SUNI1x10GEXP_BITMSK_BITS_7   0x0007f
+#define SUNI1x10GEXP_BITMSK_BITS_8   0x000ff
+#define SUNI1x10GEXP_BITMSK_BITS_9   0x001ff
+#define SUNI1x10GEXP_BITMSK_BITS_10  0x003ff
+#define SUNI1x10GEXP_BITMSK_BITS_11  0x007ff
+#define SUNI1x10GEXP_BITMSK_BITS_12  0x00fff
+#define SUNI1x10GEXP_BITMSK_BITS_13  0x01fff
+#define SUNI1x10GEXP_BITMSK_BITS_14  0x03fff
+#define SUNI1x10GEXP_BITMSK_BITS_15  0x07fff
+#define SUNI1x10GEXP_BITMSK_BITS_16  0x0ffff
+
+#define mSUNI1x10GEXP_CLR_MSBITS_1(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_15)
+#define mSUNI1x10GEXP_CLR_MSBITS_2(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_14)
+#define mSUNI1x10GEXP_CLR_MSBITS_3(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_13)
+#define mSUNI1x10GEXP_CLR_MSBITS_4(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_12)
+#define mSUNI1x10GEXP_CLR_MSBITS_5(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_11)
+#define mSUNI1x10GEXP_CLR_MSBITS_6(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_10)
+#define mSUNI1x10GEXP_CLR_MSBITS_7(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_9)
+#define mSUNI1x10GEXP_CLR_MSBITS_8(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_8)
+#define mSUNI1x10GEXP_CLR_MSBITS_9(v)  ((v) & SUNI1x10GEXP_BITMSK_BITS_7)
+#define mSUNI1x10GEXP_CLR_MSBITS_10(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_6)
+#define mSUNI1x10GEXP_CLR_MSBITS_11(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_5)
+#define mSUNI1x10GEXP_CLR_MSBITS_12(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_4)
+#define mSUNI1x10GEXP_CLR_MSBITS_13(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_3)
+#define mSUNI1x10GEXP_CLR_MSBITS_14(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_2)
+#define mSUNI1x10GEXP_CLR_MSBITS_15(v) ((v) & SUNI1x10GEXP_BITMSK_BITS_1)
+
+#define mSUNI1x10GEXP_GET_BIT(val, bitMsk) (((val)&(bitMsk)) ? 1:0)
+
+
+
+/*----------------------------------------------------------------------------
+ * Register 0x0001: S/UNI-1x10GE-XP Product Revision
+ *    Bit 3-0  REVISION
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_REVISION  0x000F
+
+/*----------------------------------------------------------------------------
+ * Register 0x0002: S/UNI-1x10GE-XP Configuration and Reset Control
+ *    Bit 2  XAUI_ARESETB
+ *    Bit 1  PL4_ARESETB
+ *    Bit 0  DRESETB
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_XAUI_ARESET  0x0004
+#define SUNI1x10GEXP_BITMSK_PL4_ARESET   0x0002
+#define SUNI1x10GEXP_BITMSK_DRESETB      0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0003: S/UNI-1x10GE-XP Loop Back and Miscellaneous Control
+ *    Bit 11  PL4IO_OUTCLKSEL
+ *    Bit 9   SYSPCSLB
+ *    Bit 8   LINEPCSLB
+ *    Bit 7   MSTAT_BYPASS
+ *    Bit 6   RXXG_BYPASS
+ *    Bit 5   TXXG_BYPASS
+ *    Bit 4   SOP_PAD_EN
+ *    Bit 1   LOS_INV
+ *    Bit 0   OVERRIDE_LOS
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUTCLKSEL  0x0800
+#define SUNI1x10GEXP_BITMSK_SYSPCSLB         0x0200
+#define SUNI1x10GEXP_BITMSK_LINEPCSLB        0x0100
+#define SUNI1x10GEXP_BITMSK_MSTAT_BYPASS     0x0080
+#define SUNI1x10GEXP_BITMSK_RXXG_BYPASS      0x0040
+#define SUNI1x10GEXP_BITMSK_TXXG_BYPASS      0x0020
+#define SUNI1x10GEXP_BITMSK_SOP_PAD_EN       0x0010
+#define SUNI1x10GEXP_BITMSK_LOS_INV          0x0002
+#define SUNI1x10GEXP_BITMSK_OVERRIDE_LOS     0x0001
+
 /*----------------------------------------------------------------------------
  * Register 0x0004: S/UNI-1x10GE-XP Device Status
  *    Bit 9 TOP_SXRA_EXPIRED
@@ -141,19 +603,229 @@
  *    Bit 0 TOP_PL4_OUT_ROOL
  *----------------------------------------------------------------------------*/
 #define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED  0x0200
+#define SUNI1x10GEXP_BITMSK_TOP_MDIO_BUSY     0x0100
+#define SUNI1x10GEXP_BITMSK_TOP_DTRB          0x0080
 #define SUNI1x10GEXP_BITMSK_TOP_EXPIRED       0x0040
+#define SUNI1x10GEXP_BITMSK_TOP_PAUSED        0x0020
 #define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL   0x0010
 #define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL   0x0008
 #define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL   0x0004
 #define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL   0x0002
 #define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL  0x0001
 
+/*----------------------------------------------------------------------------
+ * Register 0x0005: Global Performance Update and Clock Monitors
+ *    Bit 15 TIP
+ *    Bit 8  XAUI_REF_CLKA
+ *    Bit 7  RXLANE3CLKA
+ *    Bit 6  RXLANE2CLKA
+ *    Bit 5  RXLANE1CLKA
+ *    Bit 4  RXLANE0CLKA
+ *    Bit 3  CSUCLKA
+ *    Bit 2  TDCLKA
+ *    Bit 1  RSCLKA
+ *    Bit 0  RDCLKA
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TIP            0x8000
+#define SUNI1x10GEXP_BITMSK_XAUI_REF_CLKA  0x0100
+#define SUNI1x10GEXP_BITMSK_RXLANE3CLKA    0x0080
+#define SUNI1x10GEXP_BITMSK_RXLANE2CLKA    0x0040
+#define SUNI1x10GEXP_BITMSK_RXLANE1CLKA    0x0020
+#define SUNI1x10GEXP_BITMSK_RXLANE0CLKA    0x0010
+#define SUNI1x10GEXP_BITMSK_CSUCLKA        0x0008
+#define SUNI1x10GEXP_BITMSK_TDCLKA         0x0004
+#define SUNI1x10GEXP_BITMSK_RSCLKA         0x0002
+#define SUNI1x10GEXP_BITMSK_RDCLKA         0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0006: MDIO Command
+ *    Bit 4 MDIO_RDINC
+ *    Bit 3 MDIO_RSTAT
+ *    Bit 2 MDIO_LCTLD
+ *    Bit 1 MDIO_LCTLA
+ *    Bit 0 MDIO_SPRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MDIO_RDINC  0x0010
+#define SUNI1x10GEXP_BITMSK_MDIO_RSTAT  0x0008
+#define SUNI1x10GEXP_BITMSK_MDIO_LCTLD  0x0004
+#define SUNI1x10GEXP_BITMSK_MDIO_LCTLA  0x0002
+#define SUNI1x10GEXP_BITMSK_MDIO_SPRE   0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0007: MDIO Interrupt Enable
+ *    Bit 0 MDIO_BUSY_EN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MDIO_BUSY_EN  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0008: MDIO Interrupt Status
+ *    Bit 0 MDIO_BUSYI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MDIO_BUSYI  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0009: MMD PHY Address
+ *    Bit 12-8 MDIO_DEVADR
+ *    Bit 4-0 MDIO_PRTADR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MDIO_DEVADR  0x1F00
+#define SUNI1x10GEXP_BITOFF_MDIO_DEVADR  8
+#define SUNI1x10GEXP_BITMSK_MDIO_PRTADR  0x001F
+#define SUNI1x10GEXP_BITOFF_MDIO_PRTADR  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x000C: OAM Interface Control
+ *    Bit 6 MDO_OD_ENB
+ *    Bit 5 MDI_INV
+ *    Bit 4 MDI_SEL
+ *    Bit 3 RXOAMEN
+ *    Bit 2 RXOAMCLKEN
+ *    Bit 1 TXOAMEN
+ *    Bit 0 TXOAMCLKEN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MDO_OD_ENB  0x0040
+#define SUNI1x10GEXP_BITMSK_MDI_INV     0x0020
+#define SUNI1x10GEXP_BITMSK_MDI_SEL     0x0010
+#define SUNI1x10GEXP_BITMSK_RXOAMEN     0x0008
+#define SUNI1x10GEXP_BITMSK_RXOAMCLKEN  0x0004
+#define SUNI1x10GEXP_BITMSK_TXOAMEN     0x0002
+#define SUNI1x10GEXP_BITMSK_TXOAMCLKEN  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x000D: S/UNI-1x10GE-XP Master Interrupt Status
+ *    Bit 15 TOP_PL4IO_INT
+ *    Bit 14 TOP_IRAM_INT
+ *    Bit 13 TOP_ERAM_INT
+ *    Bit 12 TOP_XAUI_INT
+ *    Bit 11 TOP_MSTAT_INT
+ *    Bit 10 TOP_RXXG_INT
+ *    Bit 9 TOP_TXXG_INT
+ *    Bit 8 TOP_XRF_INT
+ *    Bit 7 TOP_XTEF_INT
+ *    Bit 6 TOP_MDIO_BUSY_INT
+ *    Bit 5 TOP_RXOAM_INT
+ *    Bit 4 TOP_TXOAM_INT
+ *    Bit 3 TOP_IFLX_INT
+ *    Bit 2 TOP_EFLX_INT
+ *    Bit 1 TOP_PL4ODP_INT
+ *    Bit 0 TOP_PL4IDU_INT
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TOP_PL4IO_INT      0x8000
+#define SUNI1x10GEXP_BITMSK_TOP_IRAM_INT       0x4000
+#define SUNI1x10GEXP_BITMSK_TOP_ERAM_INT       0x2000
+#define SUNI1x10GEXP_BITMSK_TOP_XAUI_INT       0x1000
+#define SUNI1x10GEXP_BITMSK_TOP_MSTAT_INT      0x0800
+#define SUNI1x10GEXP_BITMSK_TOP_RXXG_INT       0x0400
+#define SUNI1x10GEXP_BITMSK_TOP_TXXG_INT       0x0200
+#define SUNI1x10GEXP_BITMSK_TOP_XRF_INT        0x0100
+#define SUNI1x10GEXP_BITMSK_TOP_XTEF_INT       0x0080
+#define SUNI1x10GEXP_BITMSK_TOP_MDIO_BUSY_INT  0x0040
+#define SUNI1x10GEXP_BITMSK_TOP_RXOAM_INT      0x0020
+#define SUNI1x10GEXP_BITMSK_TOP_TXOAM_INT      0x0010
+#define SUNI1x10GEXP_BITMSK_TOP_IFLX_INT       0x0008
+#define SUNI1x10GEXP_BITMSK_TOP_EFLX_INT       0x0004
+#define SUNI1x10GEXP_BITMSK_TOP_PL4ODP_INT     0x0002
+#define SUNI1x10GEXP_BITMSK_TOP_PL4IDU_INT     0x0001
+
 /*----------------------------------------------------------------------------
  * Register 0x000E:PM3393 Global interrupt enable
  *    Bit 15 TOP_INTE
  *----------------------------------------------------------------------------*/
 #define SUNI1x10GEXP_BITMSK_TOP_INTE  0x8000
 
+/*----------------------------------------------------------------------------
+ * Register 0x0010: XTEF Miscellaneous Control
+ *    Bit 7 RF_VAL
+ *    Bit 6 RF_OVERRIDE
+ *    Bit 5 LF_VAL
+ *    Bit 4 LF_OVERRIDE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RF_VAL             0x0080
+#define SUNI1x10GEXP_BITMSK_RF_OVERRIDE        0x0040
+#define SUNI1x10GEXP_BITMSK_LF_VAL             0x0020
+#define SUNI1x10GEXP_BITMSK_LF_OVERRIDE        0x0010
+#define SUNI1x10GEXP_BITMSK_LFRF_OVERRIDE_VAL  0x00F0
+
+/*----------------------------------------------------------------------------
+ * Register 0x0011: XRF Miscellaneous Control
+ *    Bit 6-4 EN_IDLE_REP
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EN_IDLE_REP  0x0070
+
+/*----------------------------------------------------------------------------
+ * Register 0x0100: SERDES 3125 Configuration Register 1
+ *    Bit 10 RXEQB_3
+ *    Bit 8  RXEQB_2
+ *    Bit 6  RXEQB_1
+ *    Bit 4  RXEQB_0
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXEQB    0x0FF0
+#define SUNI1x10GEXP_BITOFF_RXEQB_3  10
+#define SUNI1x10GEXP_BITOFF_RXEQB_2  8
+#define SUNI1x10GEXP_BITOFF_RXEQB_1  6
+#define SUNI1x10GEXP_BITOFF_RXEQB_0  4
+
+/*----------------------------------------------------------------------------
+ * Register 0x0101: SERDES 3125 Configuration Register 2
+ *    Bit 12 YSEL
+ *    Bit  7 PRE_EMPH_3
+ *    Bit  6 PRE_EMPH_2
+ *    Bit  5 PRE_EMPH_1
+ *    Bit  4 PRE_EMPH_0
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_YSEL        0x1000
+#define SUNI1x10GEXP_BITMSK_PRE_EMPH    0x00F0
+#define SUNI1x10GEXP_BITMSK_PRE_EMPH_3  0x0080
+#define SUNI1x10GEXP_BITMSK_PRE_EMPH_2  0x0040
+#define SUNI1x10GEXP_BITMSK_PRE_EMPH_1  0x0020
+#define SUNI1x10GEXP_BITMSK_PRE_EMPH_0  0x0010
+
+/*----------------------------------------------------------------------------
+ * Register 0x0102: SERDES 3125 Interrupt Enable Register
+ *    Bit 3 LASIE
+ *    Bit 2 SPLL_RAE
+ *    Bit 1 MPLL_RAE
+ *    Bit 0 PLL_LOCKE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LASIE      0x0008
+#define SUNI1x10GEXP_BITMSK_SPLL_RAE   0x0004
+#define SUNI1x10GEXP_BITMSK_MPLL_RAE   0x0002
+#define SUNI1x10GEXP_BITMSK_PLL_LOCKE  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0103: SERDES 3125 Interrupt Visibility Register
+ *    Bit 3 LASIV
+ *    Bit 2 SPLL_RAV
+ *    Bit 1 MPLL_RAV
+ *    Bit 0 PLL_LOCKV
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LASIV      0x0008
+#define SUNI1x10GEXP_BITMSK_SPLL_RAV   0x0004
+#define SUNI1x10GEXP_BITMSK_MPLL_RAV   0x0002
+#define SUNI1x10GEXP_BITMSK_PLL_LOCKV  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0104: SERDES 3125 Interrupt Status Register
+ *    Bit 3 LASII
+ *    Bit 2 SPLL_RAI
+ *    Bit 1 MPLL_RAI
+ *    Bit 0 PLL_LOCKI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LASII      0x0008
+#define SUNI1x10GEXP_BITMSK_SPLL_RAI   0x0004
+#define SUNI1x10GEXP_BITMSK_MPLL_RAI   0x0002
+#define SUNI1x10GEXP_BITMSK_PLL_LOCKI  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x0107: SERDES 3125 Test Configuration
+ *    Bit 12 DUALTX
+ *    Bit 10 HC_1
+ *    Bit  9 HC_0
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_DUALTX  0x1000
+#define SUNI1x10GEXP_BITMSK_HC      0x0600
+#define SUNI1x10GEXP_BITOFF_HC_0    9
+
 /*----------------------------------------------------------------------------
  * Register 0x2040: RXXG Configuration 1
  *    Bit 15  RXXG_RXEN
@@ -168,10 +840,83 @@
  *    Bit 2-0 RXXG_MIFG
  *----------------------------------------------------------------------------*/
 #define SUNI1x10GEXP_BITMSK_RXXG_RXEN       0x8000
+#define SUNI1x10GEXP_BITMSK_RXXG_ROCF       0x4000
+#define SUNI1x10GEXP_BITMSK_RXXG_PAD_STRIP  0x2000
 #define SUNI1x10GEXP_BITMSK_RXXG_PUREP      0x0400
+#define SUNI1x10GEXP_BITMSK_RXXG_LONGP      0x0200
+#define SUNI1x10GEXP_BITMSK_RXXG_PARF       0x0100
 #define SUNI1x10GEXP_BITMSK_RXXG_FLCHK      0x0080
+#define SUNI1x10GEXP_BITMSK_RXXG_PASS_CTRL  0x0020
 #define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP  0x0008
 
+/*----------------------------------------------------------------------------
+ * Register 0x02041: RXXG Configuration 2
+ *    Bit 7-0 RXXG_HDRSIZE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_HDRSIZE  0x00FF
+
+/*----------------------------------------------------------------------------
+ * Register 0x2042: RXXG Configuration 3
+ *    Bit 15 RXXG_MIN_LERRE
+ *    Bit 14 RXXG_MAX_LERRE
+ *    Bit 12 RXXG_LINE_ERRE
+ *    Bit 10 RXXG_RX_OVRE
+ *    Bit 9  RXXG_ADR_FILTERE
+ *    Bit 8  RXXG_ERR_FILTERE
+ *    Bit 5  RXXG_PRMB_ERRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_MIN_LERRE     0x8000
+#define SUNI1x10GEXP_BITMSK_RXXG_MAX_LERRE     0x4000
+#define SUNI1x10GEXP_BITMSK_RXXG_LINE_ERRE     0x1000
+#define SUNI1x10GEXP_BITMSK_RXXG_RX_OVRE       0x0400
+#define SUNI1x10GEXP_BITMSK_RXXG_ADR_FILTERE   0x0200
+#define SUNI1x10GEXP_BITMSK_RXXG_ERR_FILTERRE  0x0100
+#define SUNI1x10GEXP_BITMSK_RXXG_PRMB_ERRE     0x0020
+
+/*----------------------------------------------------------------------------
+ * Register 0x2043: RXXG Interrupt
+ *    Bit 15 RXXG_MIN_LERRI
+ *    Bit 14 RXXG_MAX_LERRI
+ *    Bit 12 RXXG_LINE_ERRI
+ *    Bit 10 RXXG_RX_OVRI
+ *    Bit 9  RXXG_ADR_FILTERI
+ *    Bit 8  RXXG_ERR_FILTERI
+ *    Bit 5  RXXG_PRMB_ERRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_MIN_LERRI    0x8000
+#define SUNI1x10GEXP_BITMSK_RXXG_MAX_LERRI    0x4000
+#define SUNI1x10GEXP_BITMSK_RXXG_LINE_ERRI    0x1000
+#define SUNI1x10GEXP_BITMSK_RXXG_RX_OVRI      0x0400
+#define SUNI1x10GEXP_BITMSK_RXXG_ADR_FILTERI  0x0200
+#define SUNI1x10GEXP_BITMSK_RXXG_ERR_FILTERI  0x0100
+#define SUNI1x10GEXP_BITMSK_RXXG_PRMB_ERRE    0x0020
+
+/*----------------------------------------------------------------------------
+ * Register 0x2049: RXXG Receive FIFO Threshold
+ *    Bit 2-0 RXXG_CUT_THRU
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_CUT_THRU  0x0007
+#define SUNI1x10GEXP_BITOFF_RXXG_CUT_THRU  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2062H - 0x2069: RXXG Exact Match VID
+ *    Bit 11-0 RXXG_VID_MATCH
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_VID_MATCH  0x0FFF
+#define SUNI1x10GEXP_BITOFF_RXXG_VID_MATCH  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x206EH - 0x206F: RXXG Address Filter Control
+ *    Bit 3 RXXG_FORWARD_ENABLE
+ *    Bit 2 RXXG_VLAN_ENABLE
+ *    Bit 1 RXXG_SRC_ADDR
+ *    Bit 0 RXXG_MATCH_ENABLE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_FORWARD_ENABLE  0x0008
+#define SUNI1x10GEXP_BITMSK_RXXG_VLAN_ENABLE     0x0004
+#define SUNI1x10GEXP_BITMSK_RXXG_SRC_ADDR        0x0002
+#define SUNI1x10GEXP_BITMSK_RXXG_MATCH_ENABLE    0x0001
+
 /*----------------------------------------------------------------------------
  * Register 0x2070: RXXG Address Filter Control 2
  *    Bit 1 RXXG_PMODE
@@ -180,15 +925,446 @@
 #define SUNI1x10GEXP_BITMSK_RXXG_PMODE     0x0002
 #define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN  0x0001
 
+/*----------------------------------------------------------------------------
+ * Register 0x2081: XRF Control Register 2
+ *    Bit 6   EN_PKT_GEN
+ *    Bit 4-2 PATT
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EN_PKT_GEN  0x0040
+#define SUNI1x10GEXP_BITMSK_PATT        0x001C
+#define SUNI1x10GEXP_BITOFF_PATT        2
+
+/*----------------------------------------------------------------------------
+ * Register 0x2088: XRF Interrupt Enable
+ *    Bit 12-9 LANE_HICERE
+ *    Bit 8-5  HS_SD_LANEE
+ *    Bit 4    ALIGN_STATUS_ERRE
+ *    Bit 3-0  LANE_SYNC_STAT_ERRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LANE_HICERE          0x1E00
+#define SUNI1x10GEXP_BITOFF_LANE_HICERE          9
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANEE          0x01E0
+#define SUNI1x10GEXP_BITOFF_HS_SD_LANEE          5
+#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERRE    0x0010
+#define SUNI1x10GEXP_BITMSK_LANE_SYNC_STAT_ERRE  0x000F
+#define SUNI1x10GEXP_BITOFF_LANE_SYNC_STAT_ERRE  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2089: XRF Interrupt Status
+ *    Bit 12-9 LANE_HICERI
+ *    Bit 8-5  HS_SD_LANEI
+ *    Bit 4    ALIGN_STATUS_ERRI
+ *    Bit 3-0  LANE_SYNC_STAT_ERRI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LANE_HICERI          0x1E00
+#define SUNI1x10GEXP_BITOFF_LANE_HICERI          9
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANEI          0x01E0
+#define SUNI1x10GEXP_BITOFF_HS_SD_LANEI          5
+#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERRI    0x0010
+#define SUNI1x10GEXP_BITMSK_LANE_SYNC_STAT_ERRI  0x000F
+#define SUNI1x10GEXP_BITOFF_LANE_SYNC_STAT_ERRI  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x208A: XRF Error Status
+ *    Bit 8-5  HS_SD_LANE
+ *    Bit 4    ALIGN_STATUS_ERR
+ *    Bit 3-0  LANE_SYNC_STAT_ERR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANE3          0x0100
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANE2          0x0080
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANE1          0x0040
+#define SUNI1x10GEXP_BITMSK_HS_SD_LANE0          0x0020
+#define SUNI1x10GEXP_BITMSK_ALIGN_STATUS_ERR     0x0010
+#define SUNI1x10GEXP_BITMSK_LANE3_SYNC_STAT_ERR  0x0008
+#define SUNI1x10GEXP_BITMSK_LANE2_SYNC_STAT_ERR  0x0004
+#define SUNI1x10GEXP_BITMSK_LANE1_SYNC_STAT_ERR  0x0002
+#define SUNI1x10GEXP_BITMSK_LANE0_SYNC_STAT_ERR  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x208B: XRF Diagnostic Interrupt Enable
+ *    Bit 7-4 LANE_OVERRUNE
+ *    Bit 3-0 LANE_UNDERRUNE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LANE_OVERRUNE   0x00F0
+#define SUNI1x10GEXP_BITOFF_LANE_OVERRUNE   4
+#define SUNI1x10GEXP_BITMSK_LANE_UNDERRUNE  0x000F
+#define SUNI1x10GEXP_BITOFF_LANE_UNDERRUNE  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x208C: XRF Diagnostic Interrupt Status
+ *    Bit 7-4 LANE_OVERRUNI
+ *    Bit 3-0 LANE_UNDERRUNI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_LANE_OVERRUNI   0x00F0
+#define SUNI1x10GEXP_BITOFF_LANE_OVERRUNI   4
+#define SUNI1x10GEXP_BITMSK_LANE_UNDERRUNI  0x000F
+#define SUNI1x10GEXP_BITOFF_LANE_UNDERRUNI  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C0: RXOAM Configuration
+ *    Bit 15    RXOAM_BUSY
+ *    Bit 14-12 RXOAM_F2_SEL
+ *    Bit 10-8  RXOAM_F1_SEL
+ *    Bit 7-6   RXOAM_FILTER_CTRL
+ *    Bit 5-0   RXOAM_PX_EN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_BUSY         0x8000
+#define SUNI1x10GEXP_BITMSK_RXOAM_F2_SEL       0x7000
+#define SUNI1x10GEXP_BITOFF_RXOAM_F2_SEL       12
+#define SUNI1x10GEXP_BITMSK_RXOAM_F1_SEL       0x0700
+#define SUNI1x10GEXP_BITOFF_RXOAM_F1_SEL       8
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_CTRL  0x00C0
+#define SUNI1x10GEXP_BITOFF_RXOAM_FILTER_CTRL  6
+#define SUNI1x10GEXP_BITMSK_RXOAM_PX_EN        0x003F
+#define SUNI1x10GEXP_BITOFF_RXOAM_PX_EN        0
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C1,0x20C2: RXOAM Filter Configuration
+ *    Bit 15-8 RXOAM_FX_MASK
+ *    Bit 7-0  RXOAM_FX_VAL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_FX_MASK  0xFF00
+#define SUNI1x10GEXP_BITOFF_RXOAM_FX_MASK  8
+#define SUNI1x10GEXP_BITMSK_RXOAM_FX_VAL   0x00FF
+#define SUNI1x10GEXP_BITOFF_RXOAM_FX_VAl   0
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C3: RXOAM Configuration Register 2
+ *    Bit 13    RXOAM_REC_BYTE_VAL
+ *    Bit 11-10 RXOAM_BYPASS_MODE
+ *    Bit 5-0   RXOAM_PX_CLEAR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_REC_BYTE_VAL  0x2000
+#define SUNI1x10GEXP_BITMSK_RXOAM_BYPASS_MODE   0x0C00
+#define SUNI1x10GEXP_BITOFF_RXOAM_BYPASS_MODE   10
+#define SUNI1x10GEXP_BITMSK_RXOAM_PX_CLEAR      0x003F
+#define SUNI1x10GEXP_BITOFF_RXOAM_PX_CLEAR      0
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C4: RXOAM HEC Configuration
+ *    Bit 15-8 RXOAM_COSET
+ *    Bit 2    RXOAM_HEC_ERR_PKT
+ *    Bit 0    RXOAM_HEC_EN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_COSET        0xFF00
+#define SUNI1x10GEXP_BITOFF_RXOAM_COSET        8
+#define SUNI1x10GEXP_BITMSK_RXOAM_HEC_ERR_PKT  0x0004
+#define SUNI1x10GEXP_BITMSK_RXOAM_HEC_EN       0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C7: RXOAM Interrupt Enable
+ *    Bit 10 RXOAM_FILTER_THRSHE
+ *    Bit 9  RXOAM_OAM_ERRE
+ *    Bit 8  RXOAM_HECE_THRSHE
+ *    Bit 7  RXOAM_SOPE
+ *    Bit 6  RXOAM_RFE
+ *    Bit 5  RXOAM_LFE
+ *    Bit 4  RXOAM_DV_ERRE
+ *    Bit 3  RXOAM_DATA_INVALIDE
+ *    Bit 2  RXOAM_FILTER_DROPE
+ *    Bit 1  RXOAM_HECE
+ *    Bit 0  RXOAM_OFLE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHE  0x0400
+#define SUNI1x10GEXP_BITMSK_RXOAM_OAM_ERRE       0x0200
+#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHE    0x0100
+#define SUNI1x10GEXP_BITMSK_RXOAM_SOPE           0x0080
+#define SUNI1x10GEXP_BITMSK_RXOAM_RFE            0x0040
+#define SUNI1x10GEXP_BITMSK_RXOAM_LFE            0x0020
+#define SUNI1x10GEXP_BITMSK_RXOAM_DV_ERRE        0x0010
+#define SUNI1x10GEXP_BITMSK_RXOAM_DATA_INVALIDE  0x0008
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_DROPE   0x0004
+#define SUNI1x10GEXP_BITMSK_RXOAM_HECE           0x0002
+#define SUNI1x10GEXP_BITMSK_RXOAM_OFLE           0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C8: RXOAM Interrupt Status
+ *    Bit 10 RXOAM_FILTER_THRSHI
+ *    Bit 9  RXOAM_OAM_ERRI
+ *    Bit 8  RXOAM_HECE_THRSHI
+ *    Bit 7  RXOAM_SOPI
+ *    Bit 6  RXOAM_RFI
+ *    Bit 5  RXOAM_LFI
+ *    Bit 4  RXOAM_DV_ERRI
+ *    Bit 3  RXOAM_DATA_INVALIDI
+ *    Bit 2  RXOAM_FILTER_DROPI
+ *    Bit 1  RXOAM_HECI
+ *    Bit 0  RXOAM_OFLI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHI  0x0400
+#define SUNI1x10GEXP_BITMSK_RXOAM_OAM_ERRI       0x0200
+#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHI    0x0100
+#define SUNI1x10GEXP_BITMSK_RXOAM_SOPI           0x0080
+#define SUNI1x10GEXP_BITMSK_RXOAM_RFI            0x0040
+#define SUNI1x10GEXP_BITMSK_RXOAM_LFI            0x0020
+#define SUNI1x10GEXP_BITMSK_RXOAM_DV_ERRI        0x0010
+#define SUNI1x10GEXP_BITMSK_RXOAM_DATA_INVALIDI  0x0008
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_DROPI   0x0004
+#define SUNI1x10GEXP_BITMSK_RXOAM_HECI           0x0002
+#define SUNI1x10GEXP_BITMSK_RXOAM_OFLI           0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x20C9: RXOAM Status
+ *    Bit 10 RXOAM_FILTER_THRSHV
+ *    Bit 8  RXOAM_HECE_THRSHV
+ *    Bit 6  RXOAM_RFV
+ *    Bit 5  RXOAM_LFV
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXOAM_FILTER_THRSHV  0x0400
+#define SUNI1x10GEXP_BITMSK_RXOAM_HECE_THRSHV    0x0100
+#define SUNI1x10GEXP_BITMSK_RXOAM_RFV            0x0040
+#define SUNI1x10GEXP_BITMSK_RXOAM_LFV            0x0020
+
 /*----------------------------------------------------------------------------
  * Register 0x2100: MSTAT Control
  *    Bit 2 MSTAT_WRITE
  *    Bit 1 MSTAT_CLEAR
  *    Bit 0 MSTAT_SNAP
  *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MSTAT_WRITE  0x0004
 #define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR  0x0002
 #define SUNI1x10GEXP_BITMSK_MSTAT_SNAP   0x0001
 
+/*----------------------------------------------------------------------------
+ * Register 0x2109: MSTAT Counter Write Address
+ *    Bit 5-0 MSTAT_WRITE_ADDRESS
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MSTAT_WRITE_ADDRESS 0x003F
+#define SUNI1x10GEXP_BITOFF_MSTAT_WRITE_ADDRESS 0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2200: IFLX Global Configuration Register
+ *    Bit 15   IFLX_IRCU_ENABLE
+ *    Bit 14   IFLX_IDSWT_ENABLE
+ *    Bit 13-0 IFLX_IFD_CNT
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_IRCU_ENABLE   0x8000
+#define SUNI1x10GEXP_BITMSK_IFLX_IDSWT_ENABLE  0x4000
+#define SUNI1x10GEXP_BITMSK_IFLX_IFD_CNT       0x3FFF
+#define SUNI1x10GEXP_BITOFF_IFLX_IFD_CNT       0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2209: IFLX FIFO Overflow Enable
+ *    Bit 0 IFLX_OVFE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_OVFE 0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x220A: IFLX FIFO Overflow Interrupt
+ *    Bit 0 IFLX_OVFI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_OVFI 0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x220D: IFLX Indirect Channel Address
+ *    Bit 15 IFLX_BUSY
+ *    Bit 14 IFLX_RWB
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_BUSY  0x8000
+#define SUNI1x10GEXP_BITMSK_IFLX_RWB   0x4000
+
+/*----------------------------------------------------------------------------
+ * Register 0x220E: IFLX Indirect Logical FIFO Low Limit & Provision
+ *    Bit 9-0 IFLX_LOLIM
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_LOLIM  0x03FF
+#define SUNI1x10GEXP_BITOFF_IFLX_LOLIM  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x220F: IFLX Indirect Logical FIFO High Limit
+ *    Bit 9-0 IFLX_HILIM
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_HILIM  0x03FF
+#define SUNI1x10GEXP_BITOFF_IFLX_HILIM  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2210: IFLX Indirect Full/Almost Full Status & Limit
+ *    Bit 15   IFLX_FULL
+ *    Bit 14   IFLX_AFULL
+ *    Bit 13-0 IFLX_AFTH
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_FULL   0x8000
+#define SUNI1x10GEXP_BITMSK_IFLX_AFULL  0x4000
+#define SUNI1x10GEXP_BITMSK_IFLX_AFTH   0x3FFF
+#define SUNI1x10GEXP_BITOFF_IFLX_AFTH   0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2211: IFLX Indirect Empty/Almost Empty Status & Limit
+ *    Bit 15   IFLX_EMPTY
+ *    Bit 14   IFLX_AEMPTY
+ *    Bit 13-0 IFLX_AETH
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_IFLX_EMPTY   0x8000
+#define SUNI1x10GEXP_BITMSK_IFLX_AEMPTY  0x4000
+#define SUNI1x10GEXP_BITMSK_IFLX_AETH    0x3FFF
+#define SUNI1x10GEXP_BITOFF_IFLX_AETH    0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2240: PL4MOS Configuration Register
+ *    Bit 3 PL4MOS_RE_INIT
+ *    Bit 2 PL4MOS_EN
+ *    Bit 1 PL4MOS_NO_STATUS
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4MOS_RE_INIT          0x0008
+#define SUNI1x10GEXP_BITMSK_PL4MOS_EN               0x0004
+#define SUNI1x10GEXP_BITMSK_PL4MOS_NO_STATUS        0x0002
+
+/*----------------------------------------------------------------------------
+ * Register 0x2243: PL4MOS MaxBurst1 Register
+ *    Bit 11-0 PL4MOS_MAX_BURST1
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_BURST1  0x0FFF
+#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_BURST1  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2244: PL4MOS MaxBurst2 Register
+ *    Bit 11-0 PL4MOS_MAX_BURST2
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_BURST2  0x0FFF
+#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_BURST2  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2245: PL4MOS Transfer Size Register
+ *    Bit 7-0 PL4MOS_MAX_TRANSFER
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4MOS_MAX_TRANSFER  0x00FF
+#define SUNI1x10GEXP_BITOFF_PL4MOS_MAX_TRANSFER  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2280: PL4ODP Configuration
+ *    Bit 15-12 PL4ODP_REPEAT_T
+ *    Bit 8     PL4ODP_SOP_RULE
+ *    Bit 1     PL4ODP_EN_PORTS
+ *    Bit 0     PL4ODP_EN_DFWD
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4ODP_REPEAT_T   0xF000
+#define SUNI1x10GEXP_BITOFF_PL4ODP_REPEAT_T   12
+#define SUNI1x10GEXP_BITMSK_PL4ODP_SOP_RULE   0x0100
+#define SUNI1x10GEXP_BITMSK_PL4ODP_EN_PORTS   0x0002
+#define SUNI1x10GEXP_BITMSK_PL4ODP_EN_DFWD    0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2282: PL4ODP Interrupt Mask
+ *    Bit 0 PL4ODP_OUT_DISE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4ODP_OUT_DISE     0x0001
+
+
+
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_EOPEOBE  0x0080
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_ERREOPE  0x0040
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MEOPE    0x0008
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MSOPE    0x0004
+#define SUNI1x10GEXP_BITMSK_PL4ODP_ES_OVRE      0x0002
+
+
+/*----------------------------------------------------------------------------
+ * Register 0x2283: PL4ODP Interrupt
+ *    Bit 0 PL4ODP_OUT_DISI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4ODP_OUT_DISI     0x0001
+
+
+
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_EOPEOBI  0x0080
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_ERREOPI  0x0040
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MEOPI    0x0008
+#define SUNI1x10GEXP_BITMSK_PL4ODP_PPE_MSOPI    0x0004
+#define SUNI1x10GEXP_BITMSK_PL4ODP_ES_OVRI      0x0002
+
+/*----------------------------------------------------------------------------
+ * Register 0x2300:  PL4IO Lock Detect Status
+ *    Bit 15 PL4IO_OUT_ROOLV
+ *    Bit 12 PL4IO_IS_ROOLV
+ *    Bit 11 PL4IO_DIP2_ERRV
+ *    Bit 8  PL4IO_ID_ROOLV
+ *    Bit 4  PL4IO_IS_DOOLV
+ *    Bit 0  PL4IO_ID_DOOLV
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLV  0x8000
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLV   0x1000
+#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRV  0x0800
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLV   0x0100
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLV   0x0010
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLV   0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2301:  PL4IO Lock Detect Change
+ *    Bit 15 PL4IO_OUT_ROOLI
+ *    Bit 12 PL4IO_IS_ROOLI
+ *    Bit 11 PL4IO_DIP2_ERRI
+ *    Bit 8  PL4IO_ID_ROOLI
+ *    Bit 4  PL4IO_IS_DOOLI
+ *    Bit 0  PL4IO_ID_DOOLI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLI  0x8000
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLI   0x1000
+#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRI  0x0800
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLI   0x0100
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLI   0x0010
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLI   0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2302:  PL4IO Lock Detect Mask
+ *    Bit 15 PL4IO_OUT_ROOLE
+ *    Bit 12 PL4IO_IS_ROOLE
+ *    Bit 11 PL4IO_DIP2_ERRE
+ *    Bit 8  PL4IO_ID_ROOLE
+ *    Bit 4  PL4IO_IS_DOOLE
+ *    Bit 0  PL4IO_ID_DOOLE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_ROOLE  0x8000
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_ROOLE   0x1000
+#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERRE  0x0800
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_ROOLE   0x0100
+#define SUNI1x10GEXP_BITMSK_PL4IO_IS_DOOLE   0x0010
+#define SUNI1x10GEXP_BITMSK_PL4IO_ID_DOOLE   0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2303:  PL4IO Lock Detect Limits
+ *    Bit 15-8 PL4IO_REF_LIMIT
+ *    Bit 7-0  PL4IO_TRAN_LIMIT
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_REF_LIMIT   0xFF00
+#define SUNI1x10GEXP_BITOFF_PL4IO_REF_LIMIT   8
+#define SUNI1x10GEXP_BITMSK_PL4IO_TRAN_LIMIT  0x00FF
+#define SUNI1x10GEXP_BITOFF_PL4IO_TRAN_LIMIT  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2304:  PL4IO Calendar Repetitions
+ *    Bit 15-8 PL4IO_IN_MUL
+ *    Bit 7-0  PL4IO_OUT_MUL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_IN_MUL   0xFF00
+#define SUNI1x10GEXP_BITOFF_PL4IO_IN_MUL   8
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUT_MUL  0x00FF
+#define SUNI1x10GEXP_BITOFF_PL4IO_OUT_MUL  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x2305:  PL4IO Configuration
+ *    Bit 15  PL4IO_DIP2_ERR_CHK
+ *    Bit 11  PL4IO_ODAT_DIS
+ *    Bit 10  PL4IO_TRAIN_DIS
+ *    Bit 9   PL4IO_OSTAT_DIS
+ *    Bit 8   PL4IO_ISTAT_DIS
+ *    Bit 7   PL4IO_NO_ISTAT
+ *    Bit 6   PL4IO_STAT_OUTSEL
+ *    Bit 5   PL4IO_INSEL
+ *    Bit 4   PL4IO_DLSEL
+ *    Bit 1-0 PL4IO_OUTSEL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IO_DIP2_ERR_CHK  0x8000
+#define SUNI1x10GEXP_BITMSK_PL4IO_ODAT_DIS      0x0800
+#define SUNI1x10GEXP_BITMSK_PL4IO_TRAIN_DIS     0x0400
+#define SUNI1x10GEXP_BITMSK_PL4IO_OSTAT_DIS     0x0200
+#define SUNI1x10GEXP_BITMSK_PL4IO_ISTAT_DIS     0x0100
+#define SUNI1x10GEXP_BITMSK_PL4IO_NO_ISTAT      0x0080
+#define SUNI1x10GEXP_BITMSK_PL4IO_STAT_OUTSEL   0x0040
+#define SUNI1x10GEXP_BITMSK_PL4IO_INSEL         0x0020
+#define SUNI1x10GEXP_BITMSK_PL4IO_DLSEL         0x0010
+#define SUNI1x10GEXP_BITMSK_PL4IO_OUTSEL        0x0003
+#define SUNI1x10GEXP_BITOFF_PL4IO_OUTSEL        0
+
 /*----------------------------------------------------------------------------
  * Register 0x3040: TXXG Configuration Register 1
  *    Bit 15   TXXG_TXEN0
@@ -202,12 +1378,266 @@
  *    Bit 0    TXXG_SPRE
  *----------------------------------------------------------------------------*/
 #define SUNI1x10GEXP_BITMSK_TXXG_TXEN0        0x8000
+#define SUNI1x10GEXP_BITMSK_TXXG_HOSTPAUSE    0x2000
+#define SUNI1x10GEXP_BITMSK_TXXG_IPGT         0x1F80
 #define SUNI1x10GEXP_BITOFF_TXXG_IPGT         7
 #define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN  0x0020
 #define SUNI1x10GEXP_BITMSK_TXXG_CRCEN        0x0010
 #define SUNI1x10GEXP_BITMSK_TXXG_FCTX         0x0008
 #define SUNI1x10GEXP_BITMSK_TXXG_FCRX         0x0004
 #define SUNI1x10GEXP_BITMSK_TXXG_PADEN        0x0002
+#define SUNI1x10GEXP_BITMSK_TXXG_SPRE         0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3041: TXXG Configuration Register 2
+ *    Bit 7-0   TXXG_HDRSIZE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_HDRSIZE  0x00FF
+
+/*----------------------------------------------------------------------------
+ * Register 0x3042: TXXG Configuration Register 3
+ *    Bit 15 TXXG_FIFO_ERRE
+ *    Bit 14 TXXG_FIFO_UDRE
+ *    Bit 13 TXXG_MAX_LERRE
+ *    Bit 12 TXXG_MIN_LERRE
+ *    Bit 11 TXXG_XFERE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_ERRE  0x8000
+#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_UDRE  0x4000
+#define SUNI1x10GEXP_BITMSK_TXXG_MAX_LERRE  0x2000
+#define SUNI1x10GEXP_BITMSK_TXXG_MIN_LERRE  0x1000
+#define SUNI1x10GEXP_BITMSK_TXXG_XFERE      0x0800
+
+/*----------------------------------------------------------------------------
+ * Register 0x3043: TXXG Interrupt
+ *    Bit 15 TXXG_FIFO_ERRI
+ *    Bit 14 TXXG_FIFO_UDRI
+ *    Bit 13 TXXG_MAX_LERRI
+ *    Bit 12 TXXG_MIN_LERRI
+ *    Bit 11 TXXG_XFERI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_ERRI  0x8000
+#define SUNI1x10GEXP_BITMSK_TXXG_FIFO_UDRI  0x4000
+#define SUNI1x10GEXP_BITMSK_TXXG_MAX_LERRI  0x2000
+#define SUNI1x10GEXP_BITMSK_TXXG_MIN_LERRI  0x1000
+#define SUNI1x10GEXP_BITMSK_TXXG_XFERI      0x0800
+
+/*----------------------------------------------------------------------------
+ * Register 0x3044: TXXG Status Register
+ *    Bit 1 TXXG_TXACTIVE
+ *    Bit 0 TXXG_PAUSED
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_TXACTIVE  0x0002
+#define SUNI1x10GEXP_BITMSK_TXXG_PAUSED    0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3046: TXXG TX_MINFR -  Transmit Min Frame Size Register
+ *    Bit 7-0 TXXG_TX_MINFR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_TX_MINFR  0x00FF
+#define SUNI1x10GEXP_BITOFF_TXXG_TX_MINFR  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3052: TXXG Pause Quantum Value Configuration Register
+ *    Bit 7-0 TXXG_FC_PAUSE_QNTM
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_FC_PAUSE_QNTM  0x00FF
+#define SUNI1x10GEXP_BITOFF_TXXG_FC_PAUSE_QNTM  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3080: XTEF Control
+ *    Bit 3-0 XTEF_FORCE_PARITY_ERR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_XTEF_FORCE_PARITY_ERR  0x000F
+#define SUNI1x10GEXP_BITOFF_XTEF_FORCE_PARITY_ERR  0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3084: XTEF Interrupt Event Register
+ *    Bit 0 XTEF_LOST_SYNCI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCI  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3085: XTEF Interrupt Enable Register
+ *    Bit 0 XTEF_LOST_SYNCE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCE  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3086: XTEF Visibility Register
+ *    Bit 0 XTEF_LOST_SYNCV
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_XTEF_LOST_SYNCV  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x30C0: TXOAM OAM Configuration
+ *    Bit 15   TXOAM_HEC_EN
+ *    Bit 14   TXOAM_EMPTYCODE_EN
+ *    Bit 13   TXOAM_FORCE_IDLE
+ *    Bit 12   TXOAM_IGNORE_IDLE
+ *    Bit 11-6 TXOAM_PX_OVERWRITE
+ *    Bit 5-0  TXOAM_PX_SEL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_HEC_EN        0x8000
+#define SUNI1x10GEXP_BITMSK_TXOAM_EMPTYCODE_EN  0x4000
+#define SUNI1x10GEXP_BITMSK_TXOAM_FORCE_IDLE    0x2000
+#define SUNI1x10GEXP_BITMSK_TXOAM_IGNORE_IDLE   0x1000
+#define SUNI1x10GEXP_BITMSK_TXOAM_PX_OVERWRITE  0x0FC0
+#define SUNI1x10GEXP_BITOFF_TXOAM_PX_OVERWRITE  6
+#define SUNI1x10GEXP_BITMSK_TXOAM_PX_SEL        0x003F
+#define SUNI1x10GEXP_BITOFF_TXOAM_PX_SEL        0
+
+/*----------------------------------------------------------------------------
+ * Register 0x30C1: TXOAM Mini-Packet Rate Configuration
+ *    Bit 15   TXOAM_MINIDIS
+ *    Bit 14   TXOAM_BUSY
+ *    Bit 13   TXOAM_TRANS_EN
+ *    Bit 10-0 TXOAM_MINIRATE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_MINIDIS   0x8000
+#define SUNI1x10GEXP_BITMSK_TXOAM_BUSY      0x4000
+#define SUNI1x10GEXP_BITMSK_TXOAM_TRANS_EN  0x2000
+#define SUNI1x10GEXP_BITMSK_TXOAM_MINIRATE  0x07FF
+
+/*----------------------------------------------------------------------------
+ * Register 0x30C2: TXOAM Mini-Packet Gap and FIFO Configuration
+ *    Bit 13-10 TXOAM_FTHRESH
+ *    Bit 9-6   TXOAM_MINIPOST
+ *    Bit 5-0   TXOAM_MINIPRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_FTHRESH   0x3C00
+#define SUNI1x10GEXP_BITOFF_TXOAM_FTHRESH   10
+#define SUNI1x10GEXP_BITMSK_TXOAM_MINIPOST  0x03C0
+#define SUNI1x10GEXP_BITOFF_TXOAM_MINIPOST  6
+#define SUNI1x10GEXP_BITMSK_TXOAM_MINIPRE   0x003F
+
+/*----------------------------------------------------------------------------
+ * Register 0x30C6: TXOAM Interrupt Enable
+ *    Bit 2 TXOAM_SOP_ERRE
+ *    Bit 1 TXOAM_OFLE
+ *    Bit 0 TXOAM_ERRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_SOP_ERRE    0x0004
+#define SUNI1x10GEXP_BITMSK_TXOAM_OFLE        0x0002
+#define SUNI1x10GEXP_BITMSK_TXOAM_ERRE        0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x30C7: TXOAM Interrupt Status
+ *    Bit 2 TXOAM_SOP_ERRI
+ *    Bit 1 TXOAM_OFLI
+ *    Bit 0 TXOAM_ERRI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_SOP_ERRI    0x0004
+#define SUNI1x10GEXP_BITMSK_TXOAM_OFLI        0x0002
+#define SUNI1x10GEXP_BITMSK_TXOAM_ERRI        0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x30CF: TXOAM Coset
+ *    Bit 7-0 TXOAM_COSET
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXOAM_COSET  0x00FF
+
+/*----------------------------------------------------------------------------
+ * Register 0x3200: EFLX Global Configuration
+ *    Bit 15 EFLX_ERCU_EN
+ *    Bit 7  EFLX_EN_EDSWT
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_ERCU_EN   0x8000
+#define SUNI1x10GEXP_BITMSK_EFLX_EN_EDSWT  0x0080
+
+/*----------------------------------------------------------------------------
+ * Register 0x3201: EFLX ERCU Global Status
+ *    Bit 13 EFLX_OVF_ERR
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_OVF_ERR  0x2000
+
+/*----------------------------------------------------------------------------
+ * Register 0x3202: EFLX Indirect Channel Address
+ *    Bit 15 EFLX_BUSY
+ *    Bit 14 EFLX_RDWRB
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_BUSY   0x8000
+#define SUNI1x10GEXP_BITMSK_EFLX_RDWRB  0x4000
+
+/*----------------------------------------------------------------------------
+ * Register 0x3203: EFLX Indirect Logical FIFO Low Limit
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_LOLIM                    0x03FF
+#define SUNI1x10GEXP_BITOFF_EFLX_LOLIM                    0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3204: EFLX Indirect Logical FIFO High Limit
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_HILIM                    0x03FF
+#define SUNI1x10GEXP_BITOFF_EFLX_HILIM                    0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3205: EFLX Indirect Full/Almost-Full Status and Limit
+ *    Bit 15   EFLX_FULL
+ *    Bit 14   EFLX_AFULL
+ *    Bit 13-0 EFLX_AFTH
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_FULL   0x8000
+#define SUNI1x10GEXP_BITMSK_EFLX_AFULL  0x4000
+#define SUNI1x10GEXP_BITMSK_EFLX_AFTH   0x3FFF
+#define SUNI1x10GEXP_BITOFF_EFLX_AFTH   0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3206: EFLX Indirect Empty/Almost-Empty Status and Limit
+ *    Bit 15   EFLX_EMPTY
+ *    Bit 14   EFLX_AEMPTY
+ *    Bit 13-0 EFLX_AETH
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_EMPTY   0x8000
+#define SUNI1x10GEXP_BITMSK_EFLX_AEMPTY  0x4000
+#define SUNI1x10GEXP_BITMSK_EFLX_AETH    0x3FFF
+#define SUNI1x10GEXP_BITOFF_EFLX_AETH    0
+
+/*----------------------------------------------------------------------------
+ * Register 0x3207: EFLX Indirect FIFO Cut-Through Threshold
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_CUT_THRU                 0x3FFF
+#define SUNI1x10GEXP_BITOFF_EFLX_CUT_THRU                 0
+
+/*----------------------------------------------------------------------------
+ * Register 0x320C: EFLX FIFO Overflow Error Enable
+ *    Bit 0 EFLX_OVFE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_OVFE  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x320D: EFLX FIFO Overflow Error Indication
+ *    Bit 0 EFLX_OVFI
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_OVFI  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3210: EFLX Channel Provision
+ *    Bit 0 EFLX_PROV
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_EFLX_PROV  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3280: PL4IDU Configuration
+ *    Bit 2 PL4IDU_SYNCH_ON_TRAIN
+ *    Bit 1 PL4IDU_EN_PORTS
+ *    Bit 0 PL4IDU_EN_DFWD
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IDU_SYNCH_ON_TRAIN  0x0004
+#define SUNI1x10GEXP_BITMSK_PL4IDU_EN_PORTS        0x0002
+#define SUNI1x10GEXP_BITMSK_PL4IDU_EN_DFWD         0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3282: PL4IDU Interrupt Mask
+ *    Bit 1 PL4IDU_DIP4E
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IDU_DIP4E       0x0002
+
+/*----------------------------------------------------------------------------
+ * Register 0x3283: PL4IDU Interrupt
+ *    Bit 1 PL4IDU_DIP4I
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_PL4IDU_DIP4I       0x0002
 
 #endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */
 

drivers/net/chelsio/tp.c

+/* $Date: 2006/02/07 04:21:54 $ $RCSfile: tp.c,v $ $Revision: 1.73 $ */
+#include "common.h"
+#include "regs.h"
+#include "tp.h"
+
+struct petp {
+	adapter_t *adapter;
+};
+
+/* Pause deadlock avoidance parameters */
+#define DROP_MSEC 16
+#define DROP_PKTS_CNT  1
+
+static void tp_init(adapter_t * ap, const struct tp_params *p,
+		    unsigned int tp_clk)
+{
+	if (t1_is_asic(ap)) {
+		u32 val;
+
+		val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
+		    F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
+		if (!p->pm_size)
+			val |= F_OFFLOAD_DISABLE;
+		else
+			val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
+			    F_TP_IN_ESPI_CHECK_TCP_CSUM;
+		writel(val, ap->regs + A_TP_IN_CONFIG);
+		writel(F_TP_OUT_CSPI_CPL |
+		       F_TP_OUT_ESPI_ETHERNET |
+		       F_TP_OUT_ESPI_GENERATE_IP_CSUM |
+		       F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
+		       ap->regs + A_TP_OUT_CONFIG);
+		writel(V_IP_TTL(64) |
+		       F_PATH_MTU /* IP DF bit */  |
+		       V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
+		       V_SYN_COOKIE_PARAMETER(29),
+		       ap->regs + A_TP_GLOBAL_CONFIG);
+		/*
+		 * Enable pause frame deadlock prevention.
+		 */
+		if (is_T2(ap) && ap->params.nports > 1) {
+			u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
+
+			writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
+			       V_DROP_TICKS_CNT(drop_ticks) |
+			       V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
+			       ap->regs + A_TP_TX_DROP_CONFIG);
+		}
+
+	}
+}
+
+void t1_tp_destroy(struct petp *tp)
+{
+	kfree(tp);
+}
+
+struct petp *__devinit t1_tp_create(adapter_t * adapter, struct tp_params *p)
+{
+	struct petp *tp = kzalloc(sizeof(*tp), GFP_KERNEL);
+	if (!tp)
+		return NULL;
+
+	tp->adapter = adapter;
+
+	return tp;
+}
+
+void t1_tp_intr_enable(struct petp *tp)
+{
+	u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE);
+
+	{
+		/* We don't use any TP interrupts */
+		writel(0, tp->adapter->regs + A_TP_INT_ENABLE);
+		writel(tp_intr | F_PL_INTR_TP,
+		       tp->adapter->regs + A_PL_ENABLE);
+	}
+}
+
+void t1_tp_intr_disable(struct petp *tp)
+{
+	u32 tp_intr = readl(tp->adapter->regs + A_PL_ENABLE);
+
+	{
+		writel(0, tp->adapter->regs + A_TP_INT_ENABLE);
+		writel(tp_intr & ~F_PL_INTR_TP,
+		       tp->adapter->regs + A_PL_ENABLE);
+	}
+}
+
+void t1_tp_intr_clear(struct petp *tp)
+{
+	writel(0xffffffff, tp->adapter->regs + A_TP_INT_CAUSE);
+	writel(F_PL_INTR_TP, tp->adapter->regs + A_PL_CAUSE);
+}
+
+int t1_tp_intr_handler(struct petp *tp)
+{
+	u32 cause;
+
+
+	cause = readl(tp->adapter->regs + A_TP_INT_CAUSE);
+	writel(cause, tp->adapter->regs + A_TP_INT_CAUSE);
+	return 0;
+}
+
+static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable)
+{
+	u32 val = readl(tp->adapter->regs + A_TP_GLOBAL_CONFIG);
+
+	if (enable)
+		val |= csum_bit;
+	else
+		val &= ~csum_bit;
+	writel(val, tp->adapter->regs + A_TP_GLOBAL_CONFIG);
+}
+
+void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable)
+{
+	set_csum_offload(tp, F_IP_CSUM, enable);
+}
+
+void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable)
+{
+	set_csum_offload(tp, F_UDP_CSUM, enable);
+}
+
+void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable)
+{
+	set_csum_offload(tp, F_TCP_CSUM, enable);
+}
+
+/*
+ * Initialize TP state.  tp_params contains initial settings for some TP
+ * parameters, particularly the one-time PM and CM settings.
+ */
+int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk)
+{
+	adapter_t *adapter = tp->adapter;
+
+	tp_init(adapter, p, tp_clk);
+	writel(F_TP_RESET, adapter->regs +  A_TP_RESET);
+	return 0;
+}

drivers/net/chelsio/tp.h

+/* $Date: 2005/03/07 23:59:05 $ $RCSfile: tp.h,v $ $Revision: 1.20 $ */
+#ifndef CHELSIO_TP_H
+#define CHELSIO_TP_H
+
+#include "common.h"
+
+#define TP_MAX_RX_COALESCING_SIZE 16224U
+
+struct tp_mib_statistics {
+
+	/* IP */
+	u32 ipInReceive_hi;
+	u32 ipInReceive_lo;
+	u32 ipInHdrErrors_hi;
+	u32 ipInHdrErrors_lo;
+	u32 ipInAddrErrors_hi;
+	u32 ipInAddrErrors_lo;
+	u32 ipInUnknownProtos_hi;
+	u32 ipInUnknownProtos_lo;
+	u32 ipInDiscards_hi;
+	u32 ipInDiscards_lo;
+	u32 ipInDelivers_hi;
+	u32 ipInDelivers_lo;
+	u32 ipOutRequests_hi;
+	u32 ipOutRequests_lo;
+	u32 ipOutDiscards_hi;
+	u32 ipOutDiscards_lo;
+	u32 ipOutNoRoutes_hi;
+	u32 ipOutNoRoutes_lo;
+	u32 ipReasmTimeout;
+	u32 ipReasmReqds;
+	u32 ipReasmOKs;
+	u32 ipReasmFails;
+
+	u32 reserved[8];
+
+	/* TCP */
+	u32 tcpActiveOpens;
+	u32 tcpPassiveOpens;
+	u32 tcpAttemptFails;
+	u32 tcpEstabResets;
+	u32 tcpOutRsts;
+	u32 tcpCurrEstab;
+	u32 tcpInSegs_hi;
+	u32 tcpInSegs_lo;
+	u32 tcpOutSegs_hi;
+	u32 tcpOutSegs_lo;
+	u32 tcpRetransSeg_hi;
+	u32 tcpRetransSeg_lo;
+	u32 tcpInErrs_hi;
+	u32 tcpInErrs_lo;
+	u32 tcpRtoMin;
+	u32 tcpRtoMax;
+};
+
+struct petp;
+struct tp_params;
+
+struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p);
+void t1_tp_destroy(struct petp *tp);
+
+void t1_tp_intr_disable(struct petp *tp);
+void t1_tp_intr_enable(struct petp *tp);
+void t1_tp_intr_clear(struct petp *tp);
+int t1_tp_intr_handler(struct petp *tp);
+
+void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps);
+void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable);
+void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable);
+void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable);
+int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size);
+int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk);
+#endif

drivers/net/chelsio/vsc7326_reg.h

+/* $Date: 2006/04/28 19:20:17 $ $RCSfile: vsc7326_reg.h,v $ $Revision: 1.5 $ */
+#ifndef _VSC7321_REG_H_
+#define _VSC7321_REG_H_
+
+/* Register definitions for Vitesse VSC7321 (Meigs II) MAC
+ *
+ * Straight off the data sheet, VMDS-10038 Rev 2.0 and
+ * PD0011-01-14-Meigs-II 2002-12-12
+ */
+
+/* Just 'cause it's in here doesn't mean it's used. */
+
+#define CRA(blk,sub,adr) ((((blk) & 0x7) << 13) | (((sub) & 0xf) << 9) | (((adr) & 0xff) << 1))
+
+/* System and CPU comm's registers */
+#define REG_CHIP_ID		CRA(0x7,0xf,0x00)	/* Chip ID */
+#define REG_BLADE_ID		CRA(0x7,0xf,0x01)	/* Blade ID */
+#define REG_SW_RESET		CRA(0x7,0xf,0x02)	/* Global Soft Reset */
+#define REG_MEM_BIST		CRA(0x7,0xf,0x04)	/* mem */
+#define REG_IFACE_MODE		CRA(0x7,0xf,0x07)	/* Interface mode */
+#define REG_MSCH		CRA(0x7,0x2,0x06)	/* CRC error count */
+#define REG_CRC_CNT		CRA(0x7,0x2,0x0a)	/* CRC error count */
+#define REG_CRC_CFG		CRA(0x7,0x2,0x0b)	/* CRC config */
+#define REG_SI_TRANSFER_SEL	CRA(0x7,0xf,0x18)	/* SI Transfer Select */
+#define REG_PLL_CLK_SPEED	CRA(0x7,0xf,0x19)	/* Clock Speed Selection */
+#define REG_SYS_CLK_SELECT	CRA(0x7,0xf,0x1c)	/* System Clock Select */
+#define REG_GPIO_CTRL		CRA(0x7,0xf,0x1d)	/* GPIO Control */
+#define REG_GPIO_OUT		CRA(0x7,0xf,0x1e)	/* GPIO Out */
+#define REG_GPIO_IN		CRA(0x7,0xf,0x1f)	/* GPIO In */
+#define REG_CPU_TRANSFER_SEL	CRA(0x7,0xf,0x20)	/* CPU Transfer Select */
+#define REG_LOCAL_DATA		CRA(0x7,0xf,0xfe)	/* Local CPU Data Register */
+#define REG_LOCAL_STATUS	CRA(0x7,0xf,0xff)	/* Local CPU Status Register */
+
+/* Aggregator registers */
+#define REG_AGGR_SETUP		CRA(0x7,0x1,0x00)	/* Aggregator Setup */
+#define REG_PMAP_TABLE		CRA(0x7,0x1,0x01)	/* Port map table */
+#define REG_MPLS_BIT0		CRA(0x7,0x1,0x08)	/* MPLS bit0 position */
+#define REG_MPLS_BIT1		CRA(0x7,0x1,0x09)	/* MPLS bit1 position */
+#define REG_MPLS_BIT2		CRA(0x7,0x1,0x0a)	/* MPLS bit2 position */
+#define REG_MPLS_BIT3		CRA(0x7,0x1,0x0b)	/* MPLS bit3 position */
+#define REG_MPLS_BITMASK	CRA(0x7,0x1,0x0c)	/* MPLS bit mask */
+#define REG_PRE_BIT0POS		CRA(0x7,0x1,0x10)	/* Preamble bit0 position */
+#define REG_PRE_BIT1POS		CRA(0x7,0x1,0x11)	/* Preamble bit1 position */
+#define REG_PRE_BIT2POS		CRA(0x7,0x1,0x12)	/* Preamble bit2 position */
+#define REG_PRE_BIT3POS		CRA(0x7,0x1,0x13)	/* Preamble bit3 position */
+#define REG_PRE_ERR_CNT		CRA(0x7,0x1,0x14)	/* Preamble parity error count */
+
+/* BIST registers */
+/*#define REG_RAM_BIST_CMD	CRA(0x7,0x2,0x00)*/	/* RAM BIST Command Register */
+/*#define REG_RAM_BIST_RESULT	CRA(0x7,0x2,0x01)*/	/* RAM BIST Read Status/Result */
+#define REG_RAM_BIST_CMD	CRA(0x7,0x1,0x00)	/* RAM BIST Command Register */
+#define REG_RAM_BIST_RESULT	CRA(0x7,0x1,0x01)	/* RAM BIST Read Status/Result */
+#define   BIST_PORT_SELECT	0x00			/* BIST port select */
+#define   BIST_COMMAND		0x01			/* BIST enable/disable */
+#define   BIST_STATUS		0x02			/* BIST operation status */
+#define   BIST_ERR_CNT_LSB	0x03			/* BIST error count lo 8b */
+#define   BIST_ERR_CNT_MSB	0x04			/* BIST error count hi 8b */
+#define   BIST_ERR_SEL_LSB	0x05			/* BIST error select lo 8b */
+#define   BIST_ERR_SEL_MSB	0x06			/* BIST error select hi 8b */
+#define   BIST_ERROR_STATE	0x07			/* BIST engine internal state */
+#define   BIST_ERR_ADR0		0x08			/* BIST error address lo 8b */
+#define   BIST_ERR_ADR1		0x09			/* BIST error address lomid 8b */
+#define   BIST_ERR_ADR2		0x0a			/* BIST error address himid 8b */
+#define   BIST_ERR_ADR3		0x0b			/* BIST error address hi 8b */
+
+/* FIFO registers
+ *   ie = 0 for ingress, 1 for egress
+ *   fn = FIFO number, 0-9
+ */
+#define REG_TEST(ie,fn)		CRA(0x2,ie&1,0x00+fn)	/* Mode & Test Register */
+#define REG_TOP_BOTTOM(ie,fn)	CRA(0x2,ie&1,0x10+fn)	/* FIFO Buffer Top & Bottom */
+#define REG_TAIL(ie,fn)		CRA(0x2,ie&1,0x20+fn)	/* FIFO Write Pointer */
+#define REG_HEAD(ie,fn)		CRA(0x2,ie&1,0x30+fn)	/* FIFO Read Pointer */
+#define REG_HIGH_LOW_WM(ie,fn)	CRA(0x2,ie&1,0x40+fn)	/* Flow Control Water Marks */
+#define REG_CT_THRHLD(ie,fn)	CRA(0x2,ie&1,0x50+fn)	/* Cut Through Threshold */
+#define REG_FIFO_DROP_CNT(ie,fn) CRA(0x2,ie&1,0x60+fn)	/* Drop & CRC Error Counter */
+#define REG_DEBUG_BUF_CNT(ie,fn) CRA(0x2,ie&1,0x70+fn)	/* Input Side Debug Counter */
+#define REG_BUCKI(fn) CRA(0x2,2,0x20+fn)	/* Input Side Debug Counter */
+#define REG_BUCKE(fn) CRA(0x2,3,0x20+fn)	/* Input Side Debug Counter */
+
+/* Traffic shaper buckets
+ *   ie = 0 for ingress, 1 for egress
+ *   bn = bucket number 0-10 (yes, 11 buckets)
+ */
+/* OK, this one's kinda ugly.  Some hardware designers are perverse. */
+#define REG_TRAFFIC_SHAPER_BUCKET(ie,bn) CRA(0x2,ie&1,0x0a + (bn>7) | ((bn&7)<<4))
+#define REG_TRAFFIC_SHAPER_CONTROL(ie)	CRA(0x2,ie&1,0x3b)
+
+#define REG_SRAM_ADR(ie)	CRA(0x2,ie&1,0x0e)	/* FIFO SRAM address */
+#define REG_SRAM_WR_STRB(ie)	CRA(0x2,ie&1,0x1e)	/* FIFO SRAM write strobe */
+#define REG_SRAM_RD_STRB(ie)	CRA(0x2,ie&1,0x2e)	/* FIFO SRAM read strobe */
+#define REG_SRAM_DATA_0(ie)	CRA(0x2,ie&1,0x3e)	/* FIFO SRAM data lo 8b */
+#define REG_SRAM_DATA_1(ie)	CRA(0x2,ie&1,0x4e)	/* FIFO SRAM data lomid 8b */
+#define REG_SRAM_DATA_2(ie)	CRA(0x2,ie&1,0x5e)	/* FIFO SRAM data himid 8b */
+#define REG_SRAM_DATA_3(ie)	CRA(0x2,ie&1,0x6e)	/* FIFO SRAM data hi 8b */
+#define REG_SRAM_DATA_BLK_TYPE(ie) CRA(0x2,ie&1,0x7e)	/* FIFO SRAM tag */
+/* REG_ING_CONTROL equals REG_CONTROL with ie = 0, likewise REG_EGR_CONTROL is ie = 1 */
+#define REG_CONTROL(ie)		CRA(0x2,ie&1,0x0f)	/* FIFO control */
+#define REG_ING_CONTROL		CRA(0x2,0x0,0x0f)	/* Ingress control (alias) */
+#define REG_EGR_CONTROL		CRA(0x2,0x1,0x0f)	/* Egress control (alias) */
+#define REG_AGE_TIMER(ie)	CRA(0x2,ie&1,0x1f)	/* Aging timer */
+#define REG_AGE_INC(ie)		CRA(0x2,ie&1,0x2f)	/* Aging increment */
+#define DEBUG_OUT(ie)		CRA(0x2,ie&1,0x3f)	/* Output debug counter control */
+#define DEBUG_CNT(ie)		CRA(0x2,ie&1,0x4f)	/* Output debug counter */
+
+/* SPI4 interface */
+#define REG_SPI4_MISC		CRA(0x5,0x0,0x00)	/* Misc Register */
+#define REG_SPI4_STATUS		CRA(0x5,0x0,0x01)	/* CML Status */
+#define REG_SPI4_ING_SETUP0	CRA(0x5,0x0,0x02)	/* Ingress Status Channel Setup */
+#define REG_SPI4_ING_SETUP1	CRA(0x5,0x0,0x03)	/* Ingress Data Training Setup */
+#define REG_SPI4_ING_SETUP2	CRA(0x5,0x0,0x04)	/* Ingress Data Burst Size Setup */
+#define REG_SPI4_EGR_SETUP0	CRA(0x5,0x0,0x05)	/* Egress Status Channel Setup */
+#define REG_SPI4_DBG_CNT(n)	CRA(0x5,0x0,0x10+n)	/* Debug counters 0-9 */
+#define REG_SPI4_DBG_SETUP	CRA(0x5,0x0,0x1A)	/* Debug counters setup */
+#define REG_SPI4_TEST		CRA(0x5,0x0,0x20)	/* Test Setup Register */
+#define REG_TPGEN_UP0		CRA(0x5,0x0,0x21)	/* Test Pattern generator user pattern 0 */
+#define REG_TPGEN_UP1		CRA(0x5,0x0,0x22)	/* Test Pattern generator user pattern 1 */
+#define REG_TPCHK_UP0		CRA(0x5,0x0,0x23)	/* Test Pattern checker user pattern 0 */
+#define REG_TPCHK_UP1		CRA(0x5,0x0,0x24)	/* Test Pattern checker user pattern 1 */
+#define REG_TPSAM_P0		CRA(0x5,0x0,0x25)	/* Sampled pattern 0 */
+#define REG_TPSAM_P1		CRA(0x5,0x0,0x26)	/* Sampled pattern 1 */
+#define REG_TPERR_CNT		CRA(0x5,0x0,0x27)	/* Pattern checker error counter */
+#define REG_SPI4_STICKY		CRA(0x5,0x0,0x30)	/* Sticky bits register */
+#define REG_SPI4_DBG_INH	CRA(0x5,0x0,0x31)	/* Core egress & ingress inhibit */
+#define REG_SPI4_DBG_STATUS	CRA(0x5,0x0,0x32)	/* Sampled ingress status */
+#define REG_SPI4_DBG_GRANT	CRA(0x5,0x0,0x33)	/* Ingress cranted credit value */
+
+#define REG_SPI4_DESKEW 	CRA(0x5,0x0,0x43)	/* Ingress cranted credit value */
+
+/* 10GbE MAC Block Registers */
+/* Note that those registers that are exactly the same for 10GbE as for
+ * tri-speed are only defined with the version that needs a port number.
+ * Pass 0xa in those cases.
+ *
+ * Also note that despite the presence of a MAC address register, this part
+ * does no ingress MAC address filtering.  That register is used only for
+ * pause frame detection and generation.
+ */
+/* 10GbE specific, and different from tri-speed */
+#define REG_MISC_10G		CRA(0x1,0xa,0x00)	/* Misc 10GbE setup */
+#define REG_PAUSE_10G		CRA(0x1,0xa,0x01)	/* Pause register */
+#define REG_NORMALIZER_10G	CRA(0x1,0xa,0x05)	/* 10G normalizer */
+#define REG_STICKY_RX		CRA(0x1,0xa,0x06)	/* RX debug register */
+#define REG_DENORM_10G		CRA(0x1,0xa,0x07)	/* Denormalizer  */
+#define REG_STICKY_TX		CRA(0x1,0xa,0x08)	/* TX sticky bits */
+#define REG_MAX_RXHIGH		CRA(0x1,0xa,0x0a)	/* XGMII lane 0-3 debug */
+#define REG_MAX_RXLOW		CRA(0x1,0xa,0x0b)	/* XGMII lane 4-7 debug */
+#define REG_MAC_TX_STICKY	CRA(0x1,0xa,0x0c)	/* MAC Tx state sticky debug */
+#define REG_MAC_TX_RUNNING	CRA(0x1,0xa,0x0d)	/* MAC Tx state running debug */
+#define REG_TX_ABORT_AGE	CRA(0x1,0xa,0x14)	/* Aged Tx frames discarded */
+#define REG_TX_ABORT_SHORT	CRA(0x1,0xa,0x15)	/* Short Tx frames discarded */
+#define REG_TX_ABORT_TAXI	CRA(0x1,0xa,0x16)	/* Taxi error frames discarded */
+#define REG_TX_ABORT_UNDERRUN	CRA(0x1,0xa,0x17)	/* Tx Underrun abort counter */
+#define REG_TX_DENORM_DISCARD	CRA(0x1,0xa,0x18)	/* Tx denormalizer discards */
+#define REG_XAUI_STAT_A		CRA(0x1,0xa,0x20)	/* XAUI status A */
+#define REG_XAUI_STAT_B		CRA(0x1,0xa,0x21)	/* XAUI status B */
+#define REG_XAUI_STAT_C		CRA(0x1,0xa,0x22)	/* XAUI status C */
+#define REG_XAUI_CONF_A		CRA(0x1,0xa,0x23)	/* XAUI configuration A */
+#define REG_XAUI_CONF_B		CRA(0x1,0xa,0x24)	/* XAUI configuration B */
+#define REG_XAUI_CODE_GRP_CNT	CRA(0x1,0xa,0x25)	/* XAUI code group error count */
+#define REG_XAUI_CONF_TEST_A	CRA(0x1,0xa,0x26)	/* XAUI test register A */
+#define REG_PDERRCNT		CRA(0x1,0xa,0x27)	/* XAUI test register B */
+
+/* pn = port number 0-9 for tri-speed, 10 for 10GbE */
+/* Both tri-speed and 10GbE */
+#define REG_MAX_LEN(pn)		CRA(0x1,pn,0x02)	/* Max length */
+#define REG_MAC_HIGH_ADDR(pn)	CRA(0x1,pn,0x03)	/* Upper 24 bits of MAC addr */
+#define REG_MAC_LOW_ADDR(pn)	CRA(0x1,pn,0x04)	/* Lower 24 bits of MAC addr */
+
+/* tri-speed only
+ * pn = port number, 0-9
+ */
+#define REG_MODE_CFG(pn)	CRA(0x1,pn,0x00)	/* Mode configuration */
+#define REG_PAUSE_CFG(pn)	CRA(0x1,pn,0x01)	/* Pause configuration */
+#define REG_NORMALIZER(pn)	CRA(0x1,pn,0x05)	/* Normalizer */
+#define REG_TBI_STATUS(pn)	CRA(0x1,pn,0x06)	/* TBI status */
+#define REG_PCS_STATUS_DBG(pn)	CRA(0x1,pn,0x07)	/* PCS status debug */
+#define REG_PCS_CTRL(pn)	CRA(0x1,pn,0x08)	/* PCS control */
+#define REG_TBI_CONFIG(pn)	CRA(0x1,pn,0x09)	/* TBI configuration */
+#define REG_STICK_BIT(pn)	CRA(0x1,pn,0x0a)	/* Sticky bits */
+#define REG_DEV_SETUP(pn)	CRA(0x1,pn,0x0b)	/* MAC clock/reset setup */
+#define REG_DROP_CNT(pn)	CRA(0x1,pn,0x0c)	/* Drop counter */
+#define REG_PORT_POS(pn)	CRA(0x1,pn,0x0d)	/* Preamble port position */
+#define REG_PORT_FAIL(pn)	CRA(0x1,pn,0x0e)	/* Preamble port position */
+#define REG_SERDES_CONF(pn)	CRA(0x1,pn,0x0f)	/* SerDes configuration */
+#define REG_SERDES_TEST(pn)	CRA(0x1,pn,0x10)	/* SerDes test */
+#define REG_SERDES_STAT(pn)	CRA(0x1,pn,0x11)	/* SerDes status */
+#define REG_SERDES_COM_CNT(pn)	CRA(0x1,pn,0x12)	/* SerDes comma counter */
+#define REG_DENORM(pn)		CRA(0x1,pn,0x15)	/* Frame denormalization */
+#define REG_DBG(pn)		CRA(0x1,pn,0x16)	/* Device 1G debug */
+#define REG_TX_IFG(pn)		CRA(0x1,pn,0x18)	/* Tx IFG config */
+#define REG_HDX(pn)		CRA(0x1,pn,0x19)	/* Half-duplex config */
+
+/* Statistics */
+/* pn = port number, 0-a, a = 10GbE */
+#define REG_RX_IN_BYTES(pn)	CRA(0x4,pn,0x00)	/* # Rx in octets */
+#define REG_RX_SYMBOL_CARRIER(pn) CRA(0x4,pn,0x01)	/* Frames w/ symbol errors */
+#define REG_RX_PAUSE(pn)	CRA(0x4,pn,0x02)	/* # pause frames received */
+#define REG_RX_UNSUP_OPCODE(pn)	CRA(0x4,pn,0x03)	/* # control frames with unsupported opcode */
+#define REG_RX_OK_BYTES(pn)	CRA(0x4,pn,0x04)	/* # octets in good frames */
+#define REG_RX_BAD_BYTES(pn)	CRA(0x4,pn,0x05)	/* # octets in bad frames */
+#define REG_RX_UNICAST(pn)	CRA(0x4,pn,0x06)	/* # good unicast frames */
+#define REG_RX_MULTICAST(pn)	CRA(0x4,pn,0x07)	/* # good multicast frames */
+#define REG_RX_BROADCAST(pn)	CRA(0x4,pn,0x08)	/* # good broadcast frames */
+#define REG_CRC(pn)		CRA(0x4,pn,0x09)	/* # frames w/ bad CRC only */
+#define REG_RX_ALIGNMENT(pn)	CRA(0x4,pn,0x0a)	/* # frames w/ alignment err */
+#define REG_RX_UNDERSIZE(pn)	CRA(0x4,pn,0x0b)	/* # frames undersize */
+#define REG_RX_FRAGMENTS(pn)	CRA(0x4,pn,0x0c)	/* # frames undersize w/ crc err */
+#define REG_RX_IN_RANGE_LENGTH_ERROR(pn) CRA(0x4,pn,0x0d)	/* # frames with length error */
+#define REG_RX_OUT_OF_RANGE_ERROR(pn) CRA(0x4,pn,0x0e)	/* # frames with illegal length field */
+#define REG_RX_OVERSIZE(pn)	CRA(0x4,pn,0x0f)	/* # frames oversize */
+#define REG_RX_JABBERS(pn)	CRA(0x4,pn,0x10)	/* # frames oversize w/ crc err */
+#define REG_RX_SIZE_64(pn)	CRA(0x4,pn,0x11)	/* # frames 64 octets long */
+#define REG_RX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x12)	/* # frames 65-127 octets */
+#define REG_RX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x13)	/* # frames 128-255 */
+#define REG_RX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x14)	/* # frames 256-511 */
+#define REG_RX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x15)	/* # frames 512-1023 */
+#define REG_RX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x16)	/* # frames 1024-1518 */
+#define REG_RX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x17)	/* # frames 1519-max */
+
+#define REG_TX_OUT_BYTES(pn)	CRA(0x4,pn,0x18)	/* # octets tx */
+#define REG_TX_PAUSE(pn)	CRA(0x4,pn,0x19)	/* # pause frames sent */
+#define REG_TX_OK_BYTES(pn)	CRA(0x4,pn,0x1a)	/* # octets tx OK */
+#define REG_TX_UNICAST(pn)	CRA(0x4,pn,0x1b)	/* # frames unicast */
+#define REG_TX_MULTICAST(pn)	CRA(0x4,pn,0x1c)	/* # frames multicast */
+#define REG_TX_BROADCAST(pn)	CRA(0x4,pn,0x1d)	/* # frames broadcast */
+#define REG_TX_MULTIPLE_COLL(pn) CRA(0x4,pn,0x1e)	/* # frames tx after multiple collisions */
+#define REG_TX_LATE_COLL(pn)	CRA(0x4,pn,0x1f)	/* # late collisions detected */
+#define REG_TX_XCOLL(pn)	CRA(0x4,pn,0x20)	/* # frames lost, excessive collisions */
+#define REG_TX_DEFER(pn)	CRA(0x4,pn,0x21)	/* # frames deferred on first tx attempt */
+#define REG_TX_XDEFER(pn)	CRA(0x4,pn,0x22)	/* # frames excessively deferred */
+#define REG_TX_CSENSE(pn)	CRA(0x4,pn,0x23)	/* carrier sense errors at frame end */
+#define REG_TX_SIZE_64(pn)	CRA(0x4,pn,0x24)	/* # frames 64 octets long */
+#define REG_TX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x25)	/* # frames 65-127 octets */
+#define REG_TX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x26)	/* # frames 128-255 */
+#define REG_TX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x27)	/* # frames 256-511 */
+#define REG_TX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x28)	/* # frames 512-1023 */
+#define REG_TX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x29)	/* # frames 1024-1518 */
+#define REG_TX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x2a)	/* # frames 1519-max */
+#define REG_TX_SINGLE_COLL(pn)	CRA(0x4,pn,0x2b)	/* # frames tx after single collision */
+#define REG_TX_BACKOFF2(pn)	CRA(0x4,pn,0x2c)	/* # frames tx ok after 2 backoffs/collisions */
+#define REG_TX_BACKOFF3(pn)	CRA(0x4,pn,0x2d)	/*   after 3 backoffs/collisions */
+#define REG_TX_BACKOFF4(pn)	CRA(0x4,pn,0x2e)	/*   after 4 */
+#define REG_TX_BACKOFF5(pn)	CRA(0x4,pn,0x2f)	/*   after 5 */
+#define REG_TX_BACKOFF6(pn)	CRA(0x4,pn,0x30)	/*   after 6 */
+#define REG_TX_BACKOFF7(pn)	CRA(0x4,pn,0x31)	/*   after 7 */
+#define REG_TX_BACKOFF8(pn)	CRA(0x4,pn,0x32)	/*   after 8 */
+#define REG_TX_BACKOFF9(pn)	CRA(0x4,pn,0x33)	/*   after 9 */
+#define REG_TX_BACKOFF10(pn)	CRA(0x4,pn,0x34)	/*   after 10 */
+#define REG_TX_BACKOFF11(pn)	CRA(0x4,pn,0x35)	/*   after 11 */
+#define REG_TX_BACKOFF12(pn)	CRA(0x4,pn,0x36)	/*   after 12 */
+#define REG_TX_BACKOFF13(pn)	CRA(0x4,pn,0x37)	/*   after 13 */
+#define REG_TX_BACKOFF14(pn)	CRA(0x4,pn,0x38)	/*   after 14 */
+#define REG_TX_BACKOFF15(pn)	CRA(0x4,pn,0x39)	/*   after 15 */
+#define REG_TX_UNDERRUN(pn)	CRA(0x4,pn,0x3a)	/* # frames dropped from underrun */
+#define REG_RX_XGMII_PROT_ERR	CRA(0x4,0xa,0x3b)	/* # protocol errors detected on XGMII interface */
+#define REG_RX_IPG_SHRINK(pn)	CRA(0x4,pn,0x3c)	/* # of IPG shrinks detected */
+
+#define REG_STAT_STICKY1G(pn)	CRA(0x4,pn,0x3e)	/* tri-speed sticky bits */
+#define REG_STAT_STICKY10G	CRA(0x4,0xa,0x3e)	/* 10GbE sticky bits */
+#define REG_STAT_INIT(pn)	CRA(0x4,pn,0x3f)	/* Clear all statistics */
+
+/* MII-Management Block registers */
+/* These are for MII-M interface 0, which is the bidirectional LVTTL one.  If
+ * we hooked up to the one with separate directions, the middle 0x0 needs to
+ * change to 0x1.  And the current errata states that MII-M 1 doesn't work.
+ */
+
+#define REG_MIIM_STATUS		CRA(0x3,0x0,0x00)	/* MII-M Status */
+#define REG_MIIM_CMD		CRA(0x3,0x0,0x01)	/* MII-M Command */
+#define REG_MIIM_DATA		CRA(0x3,0x0,0x02)	/* MII-M Data */
+#define REG_MIIM_PRESCALE	CRA(0x3,0x0,0x03)	/* MII-M MDC Prescale */
+
+#define REG_ING_FFILT_UM_EN	CRA(0x2, 0, 0xd)
+#define REG_ING_FFILT_BE_EN	CRA(0x2, 0, 0x1d)
+#define REG_ING_FFILT_VAL0	CRA(0x2, 0, 0x2d)
+#define REG_ING_FFILT_VAL1	CRA(0x2, 0, 0x3d)
+#define REG_ING_FFILT_MASK0	CRA(0x2, 0, 0x4d)
+#define REG_ING_FFILT_MASK1	CRA(0x2, 0, 0x5d)
+#define REG_ING_FFILT_MASK2	CRA(0x2, 0, 0x6d)
+#define REG_ING_FFILT_ETYPE	CRA(0x2, 0, 0x7d)
+
+
+/* Whew. */
+
+#endif