block: Remove REQ_OP_ZONE_RESET_ALL emulation

Now that device mapper can handle resetting all zones of a mapped zoned
device using REQ_OP_ZONE_RESET_ALL, all zoned block device drivers
support this operation. With this, the request queue feature
BLK_FEAT_ZONE_RESETALL is not necessary and the emulation code in
blk-zone.c can be removed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-5-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

block/blk-core.c

@@ -830,11 +830,8 @@ void submit_bio_noacct(struct bio *bio)
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
 	case REQ_OP_ZONE_FINISH:
-		if (!bdev_is_zoned(bio->bi_bdev))
-			goto not_supported;
-		break;
 	case REQ_OP_ZONE_RESET_ALL:
-		if (!bdev_is_zoned(bio->bi_bdev) || !blk_queue_zone_resetall(q))
+		if (!bdev_is_zoned(bio->bi_bdev))
 			goto not_supported;
 		break;
 	case REQ_OP_DRV_IN:

block/blk-zoned.c

@@ -157,70 +157,6 @@ static inline unsigned long *blk_alloc_zone_bitmap(int node,
 			    GFP_NOIO, node);
 }
 
-static int blk_zone_need_reset_cb(struct blk_zone *zone, unsigned int idx,
-				  void *data)
-{
-	/*
-	 * For an all-zones reset, ignore conventional, empty, read-only
-	 * and offline zones.
-	 */
-	switch (zone->cond) {
-	case BLK_ZONE_COND_NOT_WP:
-	case BLK_ZONE_COND_EMPTY:
-	case BLK_ZONE_COND_READONLY:
-	case BLK_ZONE_COND_OFFLINE:
-		return 0;
-	default:
-		set_bit(idx, (unsigned long *)data);
-		return 0;
-	}
-}
-
-static int blkdev_zone_reset_all_emulated(struct block_device *bdev)
-{
-	struct gendisk *disk = bdev->bd_disk;
-	sector_t capacity = bdev_nr_sectors(bdev);
-	sector_t zone_sectors = bdev_zone_sectors(bdev);
-	unsigned long *need_reset;
-	struct bio *bio = NULL;
-	sector_t sector = 0;
-	int ret;
-
-	need_reset = blk_alloc_zone_bitmap(disk->queue->node, disk->nr_zones);
-	if (!need_reset)
-		return -ENOMEM;
-
-	ret = disk->fops->report_zones(disk, 0, disk->nr_zones,
-				       blk_zone_need_reset_cb, need_reset);
-	if (ret < 0)
-		goto out_free_need_reset;
-
-	ret = 0;
-	while (sector < capacity) {
-		if (!test_bit(disk_zone_no(disk, sector), need_reset)) {
-			sector += zone_sectors;
-			continue;
-		}
-
-		bio = blk_next_bio(bio, bdev, 0, REQ_OP_ZONE_RESET | REQ_SYNC,
-				   GFP_KERNEL);
-		bio->bi_iter.bi_sector = sector;
-		sector += zone_sectors;
-
-		/* This may take a while, so be nice to others */
-		cond_resched();
-	}
-
-	if (bio) {
-		ret = submit_bio_wait(bio);
-		bio_put(bio);
-	}
-
-out_free_need_reset:
-	kfree(need_reset);
-	return ret;
-}
-
 static int blkdev_zone_reset_all(struct block_device *bdev)
 {
 	struct bio bio;
@@ -247,7 +183,6 @@ static int blkdev_zone_reset_all(struct block_device *bdev)
 int blkdev_zone_mgmt(struct block_device *bdev, enum req_op op,
 		     sector_t sector, sector_t nr_sectors)
 {
-	struct request_queue *q = bdev_get_queue(bdev);
 	sector_t zone_sectors = bdev_zone_sectors(bdev);
 	sector_t capacity = bdev_nr_sectors(bdev);
 	sector_t end_sector = sector + nr_sectors;
@@ -275,16 +210,11 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_op op,
 		return -EINVAL;
 
 	/*
-	 * In the case of a zone reset operation over all zones,
-	 * REQ_OP_ZONE_RESET_ALL can be used with devices supporting this
-	 * command. For other devices, we emulate this command behavior by
-	 * identifying the zones needing a reset.
+	 * In the case of a zone reset operation over all zones, use
+	 * REQ_OP_ZONE_RESET_ALL.
 	 */
-	if (op == REQ_OP_ZONE_RESET && sector == 0 && nr_sectors == capacity) {
-		if (!blk_queue_zone_resetall(q))
-			return blkdev_zone_reset_all_emulated(bdev);
+	if (op == REQ_OP_ZONE_RESET && sector == 0 && nr_sectors == capacity)
 		return blkdev_zone_reset_all(bdev);
-	}
 
 	while (sector < end_sector) {
 		bio = blk_next_bio(bio, bdev, 0, op | REQ_SYNC, GFP_KERNEL);

drivers/block/null_blk/zoned.c

@@ -164,7 +164,7 @@ int null_init_zoned_dev(struct nullb_device *dev,
 		sector += dev->zone_size_sects;
 	}
 
-	lim->features |= BLK_FEAT_ZONED | BLK_FEAT_ZONE_RESETALL;
+	lim->features |= BLK_FEAT_ZONED;
 	lim->chunk_sectors = dev->zone_size_sects;
 	lim->max_zone_append_sectors = dev->zone_append_max_sectors;
 	lim->max_open_zones = dev->zone_max_open;

drivers/block/ublk_drv.c

@@ -2194,7 +2194,7 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 		if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED))
 			return -EOPNOTSUPP;
 
-		lim.features |= BLK_FEAT_ZONED | BLK_FEAT_ZONE_RESETALL;
+		lim.features |= BLK_FEAT_ZONED;
 		lim.max_active_zones = p->max_active_zones;
 		lim.max_open_zones =  p->max_open_zones;
 		lim.max_zone_append_sectors = p->max_zone_append_sectors;

drivers/block/virtio_blk.c

@@ -728,7 +728,7 @@ static int virtblk_read_zoned_limits(struct virtio_blk *vblk,
 
 	dev_dbg(&vdev->dev, "probing host-managed zoned device\n");
 
-	lim->features |= BLK_FEAT_ZONED | BLK_FEAT_ZONE_RESETALL;
+	lim->features |= BLK_FEAT_ZONED;
 
 	virtio_cread(vdev, struct virtio_blk_config,
 		     zoned.max_open_zones, &v);

drivers/nvme/host/zns.c

@@ -108,7 +108,7 @@ int nvme_query_zone_info(struct nvme_ns *ns, unsigned lbaf,
 void nvme_update_zone_info(struct nvme_ns *ns, struct queue_limits *lim,
 		struct nvme_zone_info *zi)
 {
-	lim->features |= BLK_FEAT_ZONED | BLK_FEAT_ZONE_RESETALL;
+	lim->features |= BLK_FEAT_ZONED;
 	lim->max_open_zones = zi->max_open_zones;
 	lim->max_active_zones = zi->max_active_zones;
 	lim->max_zone_append_sectors = ns->ctrl->max_zone_append;

drivers/scsi/sd_zbc.c

@@ -599,7 +599,7 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, struct queue_limits *lim,
 	if (sdkp->device->type != TYPE_ZBC)
 		return 0;
 
-	lim->features |= BLK_FEAT_ZONED | BLK_FEAT_ZONE_RESETALL;
+	lim->features |= BLK_FEAT_ZONED;
 
 	/*
 	 * Per ZBC and ZAC specifications, writes in sequential write required

include/linux/blkdev.h

@@ -318,9 +318,6 @@ typedef unsigned int __bitwise blk_features_t;
 /* is a zoned device */
 #define BLK_FEAT_ZONED			((__force blk_features_t)(1u << 10))
 
-/* supports Zone Reset All */
-#define BLK_FEAT_ZONE_RESETALL		((__force blk_features_t)(1u << 11))
-
 /* supports PCI(e) p2p requests */
 #define BLK_FEAT_PCI_P2PDMA		((__force blk_features_t)(1u << 12))
 
@@ -618,8 +615,6 @@ void blk_queue_flag_clear(unsigned int flag, struct request_queue *q);
 	test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
 #define blk_queue_nonrot(q)	(!((q)->limits.features & BLK_FEAT_ROTATIONAL))
 #define blk_queue_io_stat(q)	((q)->limits.features & BLK_FEAT_IO_STAT)
-#define blk_queue_zone_resetall(q)	\
-	((q)->limits.features & BLK_FEAT_ZONE_RESETALL)
 #define blk_queue_dax(q)	((q)->limits.features & BLK_FEAT_DAX)
 #define blk_queue_pci_p2pdma(q)	((q)->limits.features & BLK_FEAT_PCI_P2PDMA)
 #ifdef CONFIG_BLK_RQ_ALLOC_TIME