ARM: dts: imx6sx-sdb: Rearrange the regulators node

It is not recommended to place regulators inside "simple-bus", so
move them out. The motivation for doing this is to make it easier to
adding new regulators.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -49,86 +49,73 @@ volume-down {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vcc_sd3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_vcc_sd3>;
-			regulator-name = "VCC_SD3";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb_otg1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg1>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb_otg2_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg2>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_psu_5v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PSU-5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		reg_lcd_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "lcd-3v3";
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
 
-		reg_peri_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_peri_3v3>;
-			regulator-name = "peri_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-always-on;
-		};
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
 
-		reg_enet_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet_3v3>;
-			regulator-name = "enet_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		};
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	};
 
 	sound {