Commit fb25070a authored by Ladislav Michl's avatar Ladislav Michl Committed by Boris Brezillon

mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation

Since the very first commit (36cd4fb5: "[MTD] [OneNAND] Add
OMAP2 / OMAP3 OneNAND driver") DMA is disabled for OMAP2. Later
fixes thus went only into OMAP3 specific DMA functions which
turned out not to be so OMAP3 specific, so merge those two
implementations.
Signed-off-by: default avatarLadislav Michl <ladis@linux-mips.org>
Reviewed-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: default avatarRoger Quadros <rogerq@ti.com>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Tested-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
parent 36213116
...@@ -315,9 +315,7 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c, ...@@ -315,9 +315,7 @@ static inline int omap2_onenand_dma_transfer(struct omap2_onenand *c,
return 0; return 0;
} }
#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2) static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset, unsigned char *buffer, int offset,
size_t count) size_t count)
{ {
...@@ -379,7 +377,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, ...@@ -379,7 +377,7 @@ static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
return 0; return 0;
} }
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer, const unsigned char *buffer,
int offset, size_t count) int offset, size_t count)
{ {
...@@ -434,120 +432,6 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, ...@@ -434,120 +432,6 @@ static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
return 0; return 0;
} }
#else
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
return -ENOSYS;
}
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
return -ENOSYS;
}
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset, ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy(buffer, (__force void *)(this->base + bram_offset),
count);
return 0;
}
dma_src = c->phys_base + bram_offset;
dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
DMA_FROM_DEVICE);
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
if (ret)
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
return ret;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset, ret;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy((__force void *)(this->base + bram_offset), buffer,
count);
return 0;
}
dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
DMA_TO_DEVICE);
dma_dst = c->phys_base + bram_offset;
if (dma_mapping_error(&c->pdev->dev, dma_src)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
ret = omap2_onenand_dma_transfer(c, dma_src, dma_dst, count);
dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
if (ret)
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
return ret;
}
#else
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
return -ENOSYS;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
return -ENOSYS;
}
#endif
static struct platform_driver omap2_onenand_driver; static struct platform_driver omap2_onenand_driver;
static void omap2_onenand_shutdown(struct platform_device *pdev) static void omap2_onenand_shutdown(struct platform_device *pdev)
...@@ -671,14 +555,9 @@ static int omap2_onenand_probe(struct platform_device *pdev) ...@@ -671,14 +555,9 @@ static int omap2_onenand_probe(struct platform_device *pdev)
this = &c->onenand; this = &c->onenand;
if (c->dma_channel >= 0) { if (c->dma_channel >= 0) {
this->wait = omap2_onenand_wait; this->wait = omap2_onenand_wait;
if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
this->read_bufferram = omap2_onenand_read_bufferram; this->read_bufferram = omap2_onenand_read_bufferram;
this->write_bufferram = omap2_onenand_write_bufferram; this->write_bufferram = omap2_onenand_write_bufferram;
} }
}
if ((r = onenand_scan(&c->mtd, 1)) < 0) if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_dma; goto err_release_dma;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment