Commit fd1e5745 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'v6.7-rockchip-dtsfixes1' of...

Merge tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Devicetree fixes for the 6.7-cycle.

All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.

Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.

* tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
  arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
  arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
  arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls
  ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128
  arm64: dts: rockchip: minor whitespace cleanup around '='
  ARM: dts: rockchip: minor whitespace cleanup around '='
  dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf
  arm64: dts: rockchip: fix rk356x pcie msg interrupt name
  arm64: dts: rockchip: Expand reg size of vdec node for RK3399
  arm64: dts: rockchip: Expand reg size of vdec node for RK3328

Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@philSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 7c9bb190 37f3d610
......@@ -233,6 +233,7 @@ allOf:
- rockchip,rk3399-grf
- rockchip,rk3399-pmugrf
- rockchip,rk3568-pmugrf
- rockchip,rk3588-pmugrf
- rockchip,rv1108-grf
- rockchip,rv1108-pmugrf
......
......@@ -848,7 +848,7 @@ sdmmc_wp: sdmmc-wp {
};
sdmmc_pwren: sdmmc-pwren {
rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>;
};
sdmmc_bus4: sdmmc-bus4 {
......
......@@ -215,7 +215,7 @@ power-domain@RK3228_PD_VIO {
power-domain@RK3228_PD_VOP {
reg = <RK3228_PD_VOP>;
clocks =<&cru ACLK_VOP>,
clocks = <&cru ACLK_VOP>,
<&cru DCLK_VOP>,
<&cru HCLK_VOP>;
pm_qos = <&qos_vop>;
......
......@@ -668,7 +668,7 @@ vpu_mmu: iommu@ff350800 {
vdec: video-codec@ff360000 {
compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
reg = <0x0 0xff360000 0x0 0x400>;
reg = <0x0 0xff360000 0x0 0x480>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
......
......@@ -509,8 +509,7 @@ wacky_spi_audio: spi2@0 {
&pci_rootport {
mvl_wifi: wifi@0,0 {
compatible = "pci1b4b,2b42";
reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
0x83010000 0x0 0x00100000 0x0 0x00100000>;
reg = <0x0000 0x0 0x0 0x0 0x0>;
interrupt-parent = <&gpio0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
......
......@@ -34,8 +34,8 @@ &mipi_panel {
&pci_rootport {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>,
<0x03010010 0x0 0x00000000 0x0 0x00200000>;
reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
<0x03000010 0x0 0x00000000 0x0 0x00200000>;
qcom,ath10k-calibration-variant = "GO_DUMO";
};
};
......@@ -489,6 +489,7 @@ pci_rootport: pcie@0,0 {
#address-cells = <3>;
#size-cells = <2>;
ranges;
device_type = "pci";
};
};
......
......@@ -1109,7 +1109,9 @@ power-domain@RK3399_PD_VCODEC {
power-domain@RK3399_PD_VDU {
reg = <RK3399_PD_VDU>;
clocks = <&cru ACLK_VDU>,
<&cru HCLK_VDU>;
<&cru HCLK_VDU>,
<&cru SCLK_VDU_CA>,
<&cru SCLK_VDU_CORE>;
pm_qos = <&qos_video_m1_r>,
<&qos_video_m1_w>;
#power-domain-cells = <0>;
......@@ -1384,7 +1386,7 @@ vpu_mmu: iommu@ff650800 {
vdec: video-codec@ff660000 {
compatible = "rockchip,rk3399-vdec";
reg = <0x0 0xff660000 0x0 0x400>;
reg = <0x0 0xff660000 0x0 0x480>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
<&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
......
......@@ -977,7 +977,7 @@ pcie2x1: pcie@fe260000 {
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sys", "pmc", "msi", "legacy", "err";
interrupt-names = "sys", "pmc", "msg", "legacy", "err";
bus-range = <0x0 0xf>;
clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
<&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
......
......@@ -235,13 +235,13 @@ &pcie3x4 {
&pinctrl {
fan {
fan_int: fan-int {
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
......
......@@ -38,7 +38,7 @@ button-recovery {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 =<&leds_gpio>;
pinctrl-0 = <&leds_gpio>;
led-1 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
......
......@@ -369,7 +369,7 @@ emmc_cmd: emmc-cmd {
emmc_data_strobe: emmc-data-strobe {
rockchip,pins =
/* emmc_data_strobe */
<2 RK_PA2 1 &pcfg_pull_none>;
<2 RK_PA2 1 &pcfg_pull_down>;
};
};
......
......@@ -1362,7 +1362,6 @@ dfi: dfi@fe060000 {
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "ch0", "ch1", "ch2", "ch3";
rockchip,pmu = <&pmu1grf>;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment