Commit fff1011a authored by Nate Yocom's avatar Nate Yocom Committed by Dmitry Torokhov

Input: xpad - add X-Box Adaptive Profile button

Adds a new quirk for controllers that have a Profile button which has 4
states, reflected as an ABS_PROFILE axis with 4 values.
Signed-off-by: default avatarNate Yocom <nate@yocom.org>
Tested-by: default avatarBastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220908173930.28940-6-nate@yocom.orgSigned-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 1260cd04
......@@ -82,6 +82,8 @@
#define MAP_STICKS_TO_NULL (1 << 2)
#define MAP_SELECT_BUTTON (1 << 3)
#define MAP_PADDLES (1 << 4)
#define MAP_PROFILE_BUTTON (1 << 5)
#define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \
MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
......@@ -148,7 +150,7 @@ static const struct xpad_device {
{ 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE },
{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_PROFILE_BUTTON, XTYPE_XBOXONE },
{ 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
......@@ -777,6 +779,10 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
input_report_key(dev, BTN_C, data[8]);
input_report_key(dev, BTN_Z, data[9]);
/* Profile button has a value of 0-3, so it is reported as an axis */
if (xpad->mapping & MAP_PROFILE_BUTTON)
input_report_abs(dev, ABS_PROFILE, data[34]);
input_sync(dev);
}
......@@ -1800,6 +1806,9 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
case ABS_PROFILE: /* 4 value profile button (such as on XAC) */
input_set_abs_params(input_dev, abs, 0, 4, 0, 0);
break;
default:
input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
break;
......@@ -1898,6 +1907,10 @@ static int xpad_init_input(struct usb_xpad *xpad)
xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}
/* setup profile button as an axis with 4 possible values */
if (xpad->mapping & MAP_PROFILE_BUTTON)
xpad_set_up_abs(input_dev, ABS_PROFILE);
error = xpad_init_ff(xpad);
if (error)
goto err_free_input;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment