- 07 May, 2024 40 commits
-
-
Filipe Manana authored
Extent maps are always associated to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to clear_em_logging(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change clear_em_logging() to receive the inode instead of its extent map tree. Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Filipe Manana authored
Extent maps are always added to an inode's extent map tree, so there's no need to pass the extent map tree explicitly to add_extent_mapping(). In order to facilitate an upcoming change that adds a shrinker for extent maps, change add_extent_mapping() to receive the inode instead of its extent map tree. Reviewed-by:
-
Josef Bacik authored
A comment from Filipe on one of my previous cleanups brought my attention to a new helper we have for getting the root id of a root, which makes it easier to read in the code. The changes where made with the following Coccinelle semantic patch: // <smpl> @@ expression E,E1; @@ ( E->root_key.objectid = E1 | - E->root_key.objectid + btrfs_root_id(E) ) // </smpl> Reviewed-by:
-
Josef Bacik authored
Our subpage testing started hanging on generic/560 and I bisected it down to 1cab1375 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations"). This is subtle because we use eb->start to figure out where in the folio we're copying to when we're subpage, as our ->start may refer to an area inside of the folio. For example, assume a 16K page size machine with a 4K node size, and assume that we already have a cloned extent buffer when we cloned the previous search. copy_extent_buffer_full() will do the following when copying the extent buffer path->nodes[0] (src) into cloned (dest): src->start = 8k; // this is the new leaf we're cloning cloned->start = 4k; // this is left over from the previous clone src_addr = folio_address(src->folios[0]); dest_addr = folio_address(dest->folios[0]); memcpy(dest_addr + get_eb_offset_in_folio(dst, 0), src_addr + get_eb_offset_in_folio(src, 0), src->len); Now get_eb_offset_in_folio() is where the problems occur, because for sub-pagesize blocksize we can have multiple eb's per folio, the code for this is as follows size_t get_eb_offset_in_folio(eb, offset) { return (eb->start + offset & (folio_size(eb->folio[0]) - 1)); } So in the above example we are copying into offset 4K inside the folio. However once we update cloned->start to 8K to match the src the math for get_eb_offset_in_folio() changes, and any subsequent reads (i.e. btrfs_item_key_to_cpu()) will start reading from the offset 8K instead of 4K where we copied to, giving us garbage. Fix this by setting start before we co copy_extent_buffer_full() to make sure that we're copying into the same offset inside of the folio that we will read from later. All other sites of copy_extent_buffer_full() are correct because we either set ->start beforehand or we simply don't change it in the case of the tree-log usage. With this fix we now pass generic/560 on our subpage tests. Fixes: 1cab1375 ("btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations") Reviewed-by:
-
Josef Bacik authored
Now that these two structs are the same, move the btrfs_data_ref and btrfs_tree_ref up and use these in the btrfs_delayed_ref_node. Then remove the btrfs_delayed_*_ref structs. Reviewed-by:
-
Josef Bacik authored
Now that we don't use these helpers anywhere, remove them. Reviewed-by:
-
Josef Bacik authored
We only ever need to use this to get the level of the tree block ref, so use the btrfs_delayed_ref_owner() helper, which returns the level for the given reference. Reviewed-by:
-
Josef Bacik authored
Now that most of our elements are inside of btrfs_delayed_ref_node directly and we have helpers for the delayed_data_ref bits, go ahead and remove all direct usage of btrfs_delayed_data_ref and use the helpers where needed. Reviewed-by:
-
Josef Bacik authored
We don't need to pass in all the elements for the backrefs as function arguments, simply pass through the btrfs_delayed_ref_node and then extract the values we need from that. Reviewed-by:
-
Josef Bacik authored
We have all the information we need in our btrfs_delayed_ref_node, which we already pass into __btrfs_free_extent. Drop the extra arguments and just extract the values from btrfs_delayed_ref_node. Reviewed-by:
-
Josef Bacik authored
We're just extracting the values from btrfs_delayed_ref_node and passing them through, simply pass the btrfs_delayed_ref_node into __btrfs_inc_extent_ref and shrink the function arguments. Reviewed-by:
-
Josef Bacik authored
This is how we refer to it in the rest of the extent reference related code, make it consistent. Reviewed-by:
-
Josef Bacik authored
These two members are shared by both the tree refs and data refs, so move them into btrfs_delayed_ref_node proper. This allows us to greatly simplify the comparison code, as the shared refs always only sort on parent, and the non shared refs always sort first on ref_root, and then only data refs sort on their specific fields. Reviewed-by:
-
Josef Bacik authored
We consistently use ->num_bytes everywhere through the delayed ref code, except in btrfs_ref. Rename btrfs_ref to match all the other code. Reviewed-by:
-
Josef Bacik authored
Now that these helpers are identical, create a helper function that handles everything properly and strip the individual helpers down to use just the common helper. This cleans up a significant amount of duplicated code. Reviewed-by:
-
Josef Bacik authored
Now that all of the delayed ref information is in the delayed ref node, drastically simplify the delayed ref tracepoints by simply passing in the btrfs_delayed_ref_node and populating the tracepoints with the values from the structure itself. Reviewed-by:
-
Josef Bacik authored
Now that the btrfs_delayed_ref_node contains a union of the data and metadata specific information we can move the initialization into init_delayed_ref_common and just use the btrfs_ref to initialize the correct fields of the reference. Reviewed-by:
-
Josef Bacik authored
We are calling init_delayed_ref_head with all of the elements from btrfs_ref, clean this up to simply pass in the btrfs_ref and initialize the btrfs_delayed_ref_head with the values from the btrfs_ref directly. Reviewed-by:
-
Josef Bacik authored
We're extracting all of these values from the btrfs_ref we passed in already, just pass the btrfs_ref through to init_delayed_ref_common and get the values directly from the struct. Reviewed-by:
-
Josef Bacik authored
We have this in both btrfs_tree_ref and btrfs_data_ref, which is just wasting space and making the code more complicated. Move this into btrfs_ref proper and update all the call sites to do the assignment in btrfs_ref. Reviewed-by:
-
Josef Bacik authored
btrfs_ref currently has ->owning_root, and ->ref_root is shared between the tree ref and data ref, so in order to move that into btrfs_ref proper I would need to add another root parameter to the initialization function. This function has too many arguments, and adding another root will make it easy to make mistakes about which root goes where. Drop the generic ref init function and statically initialize the btrfs_ref in every usage. This makes the code easier to read because we can see what elements we're assigning, and will make the upcoming change moving the ref_root into the btrfs_ref more clear and less error prone than adding a new element to the initialization function. Reviewed-by:
-
Josef Bacik authored
We have been embedding btrfs_delayed_ref_node in the btrfs_delayed_data_ref and btrfs_delayed_tree_ref, and then we have two sets of cachep's and a variety of handling that is awkward because of this separation. Instead union these two members inside of btrfs_delayed_ref_node and make that the first class object. This allows us to go down to one cachep for our delayed ref nodes instead of two. Reviewed-by:
-
Josef Bacik authored
We have several different ways we refer to references throughout the code and it's not consistent and there's a bit of duplication. In order to clean this up I want to have one structure we use to define reference information, and one structure we use for the delayed reference information. Start this process by adding a helper to get from the btrfs_delayed_data_ref/btrfs_delayed_tree_ref to the btrfs_delayed_ref_node so that it'll make moving these structures around simpler. Reviewed-by:
-
Filipe Manana authored
Currently btrfs_prune_dentries() has open code to find the first inode in a root with a minimum inode number. Remove that code and make it use the helper btrfs_find_first_inode() for that task. Reviewed-by:
-
Filipe Manana authored
Export the relocation private helper find_next_inode() to inode.c, as this same logic is also used at btrfs_prune_dentries() and will be used by an upcoming change that adds an extent map shrinker. The next patch will change btrfs_prune_dentries() to use this helper. Reviewed-by:
-
Filipe Manana authored
The add_extent_mapping() function is short and trivial, there's no need to have a label for a quick exit in case of an error, even because there's no error handling needed, we just need to return the error. So remove that label and return directly. Also while at it remove the redundant initialization of 'ret', as that may help avoid some warnings with clang tools such as the one reported/fixed by commit 966de47f ("btrfs: remove redundant initialization of variables in log_new_ancestors"). Reviewed-by:
-
Filipe Manana authored
In the extent map self tests, when freeing all extent maps from a test extent map tree we are not expecting to find any extent map with a reference count different from 1 (the tree reference). If we find any, we just log a message but we don't fail the test, which makes it very easy to miss any bug/regression - no one reads the test messages unless a test fails. So change the behaviour to make a test fail if we find an extent map in the tree with a reference count different from 1. Make the failure happen only after removing all extent maps, so that we don't leak memory. Reviewed-by:
-
Filipe Manana authored
Instead of passing fs_info and extent map tree arguments to btrfs_add_extent_mapping(), we can pass an inode instead, as extent maps are always inserted in the extent map tree of an inode, and the fs_info can be extracted from the inode (inode->root->fs_info). The only exception is in the self tests where we allocate an extent map tree and then use it to insert/update/remove extent maps. However the tests can be changed to use a test inode and then use the inode's extent map tree. So change btrfs_add_extent_mapping() to have an inode as an argument instead of a fs_info and an extent map tree. This reduces the number of parameters and will also be needed for an upcoming change. Reviewed-by:
-
Filipe Manana authored
The csum_exist_in_range() function is now too trivial and is only used in one place, so open code it in its single caller. Reviewed-by:
-
Filipe Manana authored
Before deciding if we can do a NOCOW write into a range, one of the things we have to do is check if there are checksum items for that range. We do that through the btrfs_lookup_csums_list() function, which searches for checksums and adds them to a list supplied by the caller. But all we need is to check if there is any checksum, we don't need to look for all of them and collect them into a list, which requires more search time in the checksums tree, allocating memory for checksums items to add to the list, copy checksums from a leaf into those list items, then free that memory, etc. This is all unnecessary overhead, wasting mostly CPU time, and perhaps some occasional IO if we need to read from disk any extent buffers. So change btrfs_lookup_csums_list() to allow to return immediately in case it finds any checksum, without the need to add it to a list and read it from a leaf. This is accomplished by allowing a NULL list parameter and making the function return 1 if it found any checksum, 0 if it didn't found any, and a negative value in case of an error. The following test with fio was used to measure performance: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 cat <<EOF > /tmp/fio-job.ini [global] name=fio-rand-write filename=$MNT/fio-rand-write rw=randwrite bssplit=4k/20:8k/20:16k/20:32k/20:64k/20 direct=1 numjobs=16 fallocate=posix time_based runtime=300 [file1] size=8G ioengine=io_uring iodepth=16 EOF umount $MNT &> /dev/null mkfs.btrfs -f $DEV mount -o ssd $DEV $MNT fio /tmp/fio-job.ini umount $MNT The test was run on a release kernel (Debian's default kernel config). The results before this patch: WRITE: bw=139MiB/s (146MB/s), 8204KiB/s-9504KiB/s (8401kB/s-9732kB/s), io=17.0GiB (18.3GB), run=125317-125344msec The results after this patch: WRITE: bw=153MiB/s (160MB/s), 9241KiB/s-10.0MiB/s (9463kB/s-10.5MB/s), io=17.0GiB (18.3GB), run=114054-114071msec Reviewed-by:
-
Filipe Manana authored
In the error path we have this while loop that keeps iterating over the csums of the list and then delete them from the list and free them, testing for an error (ret < 0) and list emptyness as the conditions of the while loop. Simplify this by using list_for_each_entry_safe() so there's no need to delete elements from the list and need to test the error condition on each iteration. Also rename the 'fail' label to 'out' since the label is not exclusive to a failure path, as we also end up there when the function succeeds, and it's also a more common label name. Reviewed-by:
-
Filipe Manana authored
There's no need to use a temporary list to add the checksums, we can just add them to input list and then on error delete and free any checksums that were added. So simplify and remove the temporary list. Reviewed-by:
-
Filipe Manana authored
All the callers of btrfs_lookup_csums_list() pass a value of 0 as the "search_commit" parameter. So remove it and make the function behave as to always search from the regular root. Reviewed-by:
-
Filipe Manana authored
Add a function comment to btrfs_lookup_csums_list() to document it. With another upcoming change its parameter list and return value will be less obvious. So add the documentation now so that it can be updated where needed later. Reviewed-by:
-
Filipe Manana authored
btrfs_page_mkwrite() is a struct vm_operations_struct callback and we define that structure in file.c. Currently the function is in inode.c and has to be exported to be used in file.c, which makes no sense because it's not used anywhere else. So move btrfs_page_mkwrite() from inode.c and into file.c. While at it do a few minor style changes: 1) Capitalize the first word of every comment and end each sentence with punctuation; 2) Avoid splitting some statements into two lines when everything fits in 85 characters or less. Signed-off-by:
-
Filipe Manana authored
There are no more users of btrfs_clone_chunk_map(), the last one (and only one ever) was removed in commit 1ec17ef5 ("btrfs: zoned: fix use-after-free in do_zone_finish()"). So remove btrfs_clone_chunk_map(). Reviewed-by:
-
Filipe Manana authored
At warn_about_uncommitted_trans(), there's no need to check if the list is empty and return, because list_for_each_entry_safe() is safe to call for an empty list, it simply does nothing. So remove the check. Reviewed-by:
-
Filipe Manana authored
At btrfs_finish_one_ordered() it's pointless to assign 0 to the 'ret' variable because if it has a non-zero value (error), we have already jumped to the 'out' label. So remove that redundant assignment. Reviewed-by:
-
Filipe Manana authored
The mod_start and mod_len fields of struct extent_map were introduced by commit 4e2f84e6 ("Btrfs: improve fsync by filtering extents that we want") in order to avoid too low performance when fsyncing a file that keeps getting extent maps merge, because it resulted in each fsync logging again csum ranges that were already merged before. We don't need this anymore as extent maps in the list of modified extents are never merged with other extent maps and once we log an extent map we remove it from the list of modified extent maps, so it's never logged twice. So remove the mod_start and mod_len fields from struct extent_map and use instead the start and len fields when logging checksums in the fast fsync path. This also makes EXTENT_FLAG_FILLING unused so remove it as well. Running the reproducer from the commit mentioned before, with a larger number of extents and against a null block device, so that IO is fast and we can better see any impact from searching checksums items and logging them, gave the following results from dd: Before this change: 409600000 bytes (410 MB, 391 MiB) copied, 22.948 s, 17.8 MB/s After this change: 409600000 bytes (410 MB, 391 MiB) copied, 22.9997 s, 17.8 MB/s So no changes in throughput. The test was done in a release kernel (non-debug, Debian's default kernel config) and its steps are the following: $ mkfs.btrfs -f /dev/nullb0 $ mount /dev/sdb /mnt $ dd if=/dev/zero of=/mnt/foobar bs=4k count=100000 oflag=sync $ umount /mnt This also reduces the size of struct extent_map from 128 bytes down to 112 bytes, so now we can have 36 extents maps per 4K page instead of 32. Reviewed-by:
-
Boris Burkov authored
Some of the operations after the free might convert more PERTRANS metadata. Do the freeing as late as possible to eliminate a source of leaked PERTRANS metadata. This helps with the pass rate of generic/269 and generic/475. Reviewed-by:
Qu Wenruo <qwu@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
-
