- 16 May, 2012 32 commits
-
-
Greg Kroah-Hartman authored
This reverts commit 49b81a3c. It causes build breakage under some configurations. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vorontsov authored
Since ramoops was converted to pstore, it has nothing to do with character devices nowadays. Instead, today it is just a RAM backend for pstore. The patch just moves things around. There are a few changes were needed because of the move: 1. Kconfig and Makefiles fixups, of course. 2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this is needed to keep user experience the same as with ramoops driver (i.e. so that ramoops.foo kernel command line arguments would still work). Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by:
Marco Stornelli <marco.stornelli@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warnings for phys_addr_t type variables: drivers/char/ramoops.c:246:3: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t' drivers/char/ramoops.c:273:2: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'phys_addr_t' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Kees Cook authored
Instead of using /dev/mem directly and forcing userspace to know (or extract) where the platform has defined persistent memory, how many slots it has, the sizes, etc, use the common pstore infrastructure to handle Oops gathering and extraction. This presents a much easier to use filesystem-based view to the memory region. This also means that any other tools that are written to understand pstore will automatically be able to process ramoops too. Signed-off-by:
-
Anton Vorontsov authored
This is a transition patch to keep things bisectable, just moves some routines under '#ifndef MODULE'. The code inside the #ifndef will go away soon, but so far we must support pstore and ram_console. So, we are about to use persistent_ram with pstore, with the ability to compile persistent_ram routines as modules. Some parts of persistent_ram uses memblock_reserve() routine, which is should be only used built-in code, and thus it is not exported. These persistent_ram bits are only used by Android's ram_console, which is always built-in. Without this patch, we won't able to compile persistent_ram as a module: ERROR: "memblock_reserve" [fs/pstore/ramoops.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 (As alternative, we could export memblock_reserve, but the thing is: we won't need it later.) Signed-off-by:
-
Anton Vorontsov authored
Remove 'old_log_footer_size' and 'early' members of struct persistent_ram_zone, as these were never used at all. Signed-off-by:
-
Masanari Iida authored
Correct spelling typo "padater" to "padapter" in rtl871x_io.h Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. While moving the struct boardtype, convert it to C99 initializers to improve code readability. This results is a slight increase in the total lines of code. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Refactor some of the other functions to remove the remaining forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Refactor some of the other functions to remove the remaining forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Refactor some of the other functions to remove the remaining forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
- 15 May, 2012 2 commits
-
-
H Hartley Sweeten authored
Refactor of the unioxx5 comedi driver to remove all the forward declarations. Signed-off-by:
-
Sage Ahn authored
This patch provides the kernel driver for the GDM72xx WiMAX chips developed by GCT Semiconductor, Inc., which enables mobile WiMAX connection on the Linux host. Signed-off-by:
Sage Ahn <syahn@gctsemi.com> Cc: Ben Chan <benchan@chromium.org> Signed-off-by:
-
- 14 May, 2012 6 commits
-
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Dan Carpenter authored
wl_device_dealloc() dereferences the "dev" paramter, so let's move it under the check for NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
H Hartley Sweeten authored
Move the module_init/module_exit routines and the associated struct comedi_drive and struct pci_driver to the end of the source. This is more typical of how other drivers are written and removes the need for the forward declarations. Convert the driver to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
H Hartley Sweeten authored
Convert the refactored comedi pci drivers to use the module_comedi_pci_driver() macro which makes the code smaller and a bit simpler. In the process, rename some of the symbols in the driver to standardize the comedi pci drivers. Based on the driver {name}: 1) Rename the comedi_driver to {name}_driver. 2) Use a static string {name} for the comedi_driver.driver_name. 3) Rename the pci probe/remove functions to {name)_pci_probe/remove. 4) Rename the pci id_table to {name}_pci_table. 5) Add the static string {name} for the pci_driver.name. Signed-off-by: -
H Hartley Sweeten authored
Introduce the module_comedi_pci_driver macro, and the associated register/unregister functions, which is a convenience macro for comedi pci driver modules similar to module_platform_driver. It is intended to be used by drivers where the init/exit section does nothing but register/unregister the comedi driver and associated pci driver. By using this macro it is possible to eliminate a few lines of boilerplate code per comedi pci driver. Add a check to make sure that the pci_driver->name is set. Once all the comedi pci drivers have been fixed this will be removed. Also, when registering the pci driver check for failure and unregister the comedi driver. Signed-off-by:
-
Samuel Iglesias Gonsalvez authored
Signed-off-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by:
-
