- 20 Feb, 2024 2 commits
-
-
Marc Kleine-Budde authored
Reduce the scope of the variable "err" to the individual cases. This is to avoid the mistake of setting "err" in the mistaken belief that it will be evaluated later. Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20240220-raw-setsockopt-v1-1-7d34cb1377fc@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Oliver Hartkopp authored
The code for the CAN_RAW_XL_VCID_OPTS getsockopt() was incompletely adopted from the CAN_RAW_FILTER getsockopt(). Add the missing put_user() and return statements. Flagged by Smatch. Fixes: c83c22ec ("can: canxl: add virtual CAN network identifier support") Reported-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20240219200021.12113-1-socketcan@hartkopp.netSigned-off-by:
-
- 16 Feb, 2024 4 commits
-
-
Marc Kleine-Budde authored
Marc Kleine-Budde <mkl@pengutronix.de> says: ECC is an IP configuration option where counter registers are added in IP for 1bit/2bit ECC errors count and reset. Also driver reports 1bit/2bit ECC errors for FIFOs based on ECC error interrupts. Add xlnx,has-ecc optional property for Xilinx AXI CAN controller to support ECC if the ECC block is enabled in the HW. Add ethtool stats interface for getting all the ECC errors information. There is no public documentation for it available. Changes in v8: - Use u64_stats_sync instead of spinlock - Renamed stats strings: use "_" instead of "-" - Renamed stats strings: add "_errors" trailer - Renamed stats variables similar to stats strings Changes in v7: - Update with spinlock only for stats counters Changes in v6: - Update commit description Changes in v5: - Fix review comments - Change the sequence of updates the stats - Add get_strings and get_sset_count stats interface - Use u64 stats helper function Changes in v4: - Fix DT binding check warning - Update xlnx,has-ecc property description Changes in v3: - Update mailing list - Update commit description Changes in v2: - Address review comments - Add ethtool stats interface - Update commit description Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-0-8d75f8b80771@pengutronix.deSigned-off-by:
-
Srinivas Goud authored
Add ethtool stats interface for reading FIFO 1bit/2bit ECC errors information. Signed-off-by:
Srinivas Goud <srinivas.goud@amd.com> Link: https://lore.kernel.org/all/20240213-xilinx_ecc-v8-3-8d75f8b80771@pengutronix.deSigned-off-by:
-
Srinivas Goud authored
Add ECC support for Xilinx CAN Controller, so this driver reports 1bit/2bit ECC errors for FIFO's based on ECC error interrupt. ECC feature for Xilinx CAN Controller selected through 'xlnx,has-ecc' DT property Signed-off-by:
-
Srinivas Goud authored
ECC feature added to CAN TX_OL, TX_TL and RX FIFOs of Xilinx AXI CAN Controller. ECC is an IP configuration option where counter registers are added in IP for 1bit/2bit ECC errors. 'xlnx,has-ecc' is an optional property and added to Xilinx AXI CAN Controller node if ECC block enabled in the HW Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
- 14 Feb, 2024 27 commits
-
-
Marc Kleine-Budde authored
Martin Hundebøll <martin@geanix.com> says: This is the third iteration of the previous submitted patches [0] and [1]. This revision replaces the "wake_source" function parameters to a flag in the class device structure, and adds a patch to document the "wakeup-source" device tree property. Also, the previous revisions forgot to mention that the patches are based on Markus' coalescing patches [2]. Those implements caching of the enabled interrupts, which is handy when restoring the set of interrupts in the resume path. [0] https://lore.kernel.org/linux-can/20230912093807.1383720-1-martin@geanix.com [1] https://lore.kernel.org/linux-can/20230919122841.3803289-1-martin@geanix.com [2] https://lore.kernel.org/linux-can/20230929141304.3934380-1-msp@baylibre.com Link: https://lore.kernel.org/all/20231113131452.214961-1-martin@geanix.comSigned-off-by:
-
Martin Hundebøll authored
Implement the "wakeup-source" device tree property, so the chip is left running when suspending, and its rx interrupt is used as a wakeup source to resume operation. Signed-off-by:
Martin Hundebøll <martin@geanix.com> Signed-off-by:
-
Martin Hundebøll authored
Add a flag to the device class structure that leaves the chip in a running state with rx interrupt enabled, so that an m_can device driver can configure and use the interrupt as a wakeup source. Signed-off-by:
-
Martin Hundebøll authored
Let it be known that the tcan4x5x device can now be configured to wake the host from suspend when a can frame is received. Signed-off-by:
-
Francesco Dolcini authored
m_can_clk_start() already skip starting the clock when clock support is disabled, remove the redundant check in m_can_class_register(). This also solves the imbalance with m_can_clk_stop() that is called afterward in the same function before the return. Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20240104235723.46931-1-francesco@dolcini.it [mkl: rebased to net-next/main] Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-6.9-20240213' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-6.9-20240213 this is a pull request of 23 patches for net-next/master. The first patch is by Nicolas Maier and targets the CAN Broadcast Manager (bcm), it adds message flags to distinguish between own local and remote traffic. Oliver Hartkopp contributes a patch for the CAN ISOTP protocol that adds dynamic flow control parameters. Stefan Mätje's patch series add support for the esd PCIe/402 CAN interface family. Markus Schneider-Pargmann contributes 14 patches for the m_can to optimize for the SPI attached tcan4x5x controller. A patch by Vincent Mailhol replaces Wolfgang Grandegger by Vincent Mailhol as the CAN drivers Co-Maintainer. Jimmy Assarsson's patch add support for the Kvaser M.2 PCIe 4xCAN adapter. A patch by Daniil Dulov removed a redundant NULL check in the softing driver. Oliver Hartkopp contributes a patch to add CANXL virtual CAN network identifier support. A patch by myself removes Naga Sureshkumar Relli as the maintainer of the xilinx_can driver, as their email bounces. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== add multi-buff support for xdp running in generic mode Introduce multi-buffer support for xdp running in generic mode not always linearizing the skb in netif_receive_generic_xdp routine. Introduce generic percpu page_pools allocator. ==================== Link: https://lore.kernel.org/r/cover.1707729884.git.lorenzo@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lorenzo Bianconi authored
Rely on skb_pp_cow_data utility routine and remove duplicated code. Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by:
Toke Hoiland-Jorgensen <toke@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/029cc14cce41cb242ee7efdcf32acc81f1ce4e9f.1707729884.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Similar to native xdp, do not always linearize the skb in netif_receive_generic_xdp routine but create a non-linear xdp_buff to be processed by the eBPF program. This allow to add multi-buffer support for xdp running in generic mode. Acked-by:
-
Lorenzo Bianconi authored
Rely on skb pointer reference instead of the skb pointer in do_xdp_generic and netif_receive_generic_xdp routine signatures. This is a preliminary patch to add multi-buff support for xdp running in generic mode where we will need to reallocate the skb to avoid linearization and we will need to make it visible to do_xdp_generic() caller. Acked-by:
-
Lorenzo Bianconi authored
Introduce generic percpu page_pools allocator. Moreover add page_pool_create_percpu() and cpuid filed in page_pool struct in order to recycle the page in the page_pool "hot" cache if napi_pp_put_page() is running on the same cpu. This is a preliminary patch to add xdp multi-buff support for xdp running in generic mode. Acked-by:
-
Luiz Angelo Daros de Luca authored
While no supported devices currently utilize EXT0, the register reserves the bits for an EXT0. EXT0 is utilized by devices from the generation prior to rtl8365mb, such as those supported by the driver library rtl8367b. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240212-realtek-fix_ext0-v1-1-f3d2536d191a@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: extend EEE tx idle timer support This series extends EEE tx idle timer support, and exposes the timer value to userspace. ==================== Link: https://lore.kernel.org/r/89a5fef5-a4b7-4d5d-9c35-764248be5a19@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Add support for returning the tx_lpi_timer value to userspace. This is supported by few chip versions only: RTL8168h/RTL8125/RTL8126 Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/4eee9c34-c5d6-4c96-9b05-455896dea59a@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Support setting the EEE tx idle timer also on RTL8168h. Signed-off-by:
-
Heiner Kallweit authored
Add a generic setter for the EEE tx idle timer and use it with all RTL8125/RTL8126 chip versions, in line with the vendor driver. This prepares for adding EEE tx idle timer support for additional chip versions. Signed-off-by:
-
Heiner Kallweit authored
This adds LED support for RTL8125/RTL8126. Note: Due to missing datasheets changing the 5Gbps link mode isn't supported for RTL8126. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Qualcomm Atheros AR9331 built-in switch bindings to DT schema. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240212182911.233819-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Csókás Bence authored
FEC_ENET_FCE is the Flow Control Enable bit (bit 5) of the RCR. This is now defined as FEC_RCR_FLOWCTL. Signed-off-by:
Csókás Bence <csokas.bence@prolan.hu> Reviewed-by:
-
Csókás Bence authored
Add defines for bits of ECR, RCR control registers, TX watermark etc. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: adopt netdev_lockdep_set_classes() Instead of waiting for syzbot to discover lockdep false positives, make sure we use netdev_lockdep_set_classes() a bit more. ==================== Link: https://lore.kernel.org/r/20240212140700.2795436-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Based on a syzbot report, it appears many virtual drivers do not yet use netdev_lockdep_set_classes(), triggerring lockdep false positives. WARNING: possible recursive locking detected 6.8.0-rc4-next-20240212-syzkaller #0 Not tainted syz-executor.0/19016 is trying to acquire lock: ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 but task is already holding lock: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 other info that might help us debug this: Possible unsafe locking scenario: CPU0 lock(_xmit_ETHER#2); lock(_xmit_ETHER#2); *** DEADLOCK *** May be due to missing lock nesting notation 9 locks held by syz-executor.0/19016: #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline] #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x82c/0x1040 net/core/rtnetlink.c:6603 #1: ffffc90000a08c00 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x600 kernel/time/timer.c:1697 #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228 #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline] #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline] #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284 #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline] #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325 #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline] #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228 #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline] #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline] #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284 #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline] #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325 stack backtrace: CPU: 1 PID: 19016 Comm: syz-executor.0 Not tainted 6.8.0-rc4-next-20240212-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_deadlock kernel/locking/lockdep.c:3062 [inline] validate_chain+0x15c1/0x58e0 kernel/locking/lockdep.c:3856 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e4/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __netif_tx_lock include/linux/netdevice.h:4452 [inline] sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340 __dev_xmit_skb net/core/dev.c:3784 [inline] __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325 neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235 iptunnel_xmit+0x540/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x20ee/0x2960 net/ipv4/ip_tunnel.c:831 erspan_xmit+0x9de/0x1460 net/ipv4/ip_gre.c:720 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3555 [inline] dev_hard_start_xmit+0x242/0x770 net/core/dev.c:3571 sch_direct_xmit+0x2b6/0x5f0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3784 [inline] __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325 neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235 igmpv3_send_cr net/ipv4/igmp.c:723 [inline] igmp_ifc_timer_expire+0xb71/0xd90 net/ipv4/igmp.c:813 call_timer_fn+0x17e/0x600 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x621/0x830 kernel/time/timer.c:2038 run_timer_softirq+0x67/0xf0 kernel/time/timer.c:2051 __do_softirq+0x2bc/0x943 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1076 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:resched_offsets_ok kernel/sched/core.c:10127 [inline] RIP: 0010:__might_resched+0x16f/0x780 kernel/sched/core.c:10142 Code: 00 4c 89 e8 48 c1 e8 03 48 ba 00 00 00 00 00 fc ff df 48 89 44 24 38 0f b6 04 10 84 c0 0f 85 87 04 00 00 41 8b 45 00 c1 e0 08 <01> d8 44 39 e0 0f 85 d6 00 00 00 44 89 64 24 1c 48 8d bc 24 a0 00 RSP: 0018:ffffc9000ee069e0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8880296a9e00 RDX: dffffc0000000000 RSI: ffff8880296a9e00 RDI: ffffffff8bfe8fa0 RBP: ffffc9000ee06b00 R08: ffffffff82326877 R09: 1ffff11002b5ad1b R10: dffffc0000000000 R11: ffffed1002b5ad1c R12: 0000000000000000 R13: ffff8880296aa23c R14: 000000000000062a R15: 1ffff92001dc0d44 down_write+0x19/0x50 kernel/locking/rwsem.c:1578 kernfs_activate fs/kernfs/dir.c:1403 [inline] kernfs_add_one+0x4af/0x8b0 fs/kernfs/dir.c:819 __kernfs_create_file+0x22e/0x2e0 fs/kernfs/file.c:1056 sysfs_add_file_mode_ns+0x24a/0x310 fs/sysfs/file.c:307 create_files fs/sysfs/group.c:64 [inline] internal_create_group+0x4f4/0xf20 fs/sysfs/group.c:152 internal_create_groups fs/sysfs/group.c:192 [inline] sysfs_create_groups+0x56/0x120 fs/sysfs/group.c:218 create_dir lib/kobject.c:78 [inline] kobject_add_internal+0x472/0x8d0 lib/kobject.c:240 kobject_add_varg lib/kobject.c:374 [inline] kobject_init_and_add+0x124/0x190 lib/kobject.c:457 netdev_queue_add_kobject net/core/net-sysfs.c:1706 [inline] netdev_queue_update_kobjects+0x1f3/0x480 net/core/net-sysfs.c:1758 register_queue_kobjects net/core/net-sysfs.c:1819 [inline] netdev_register_kobject+0x265/0x310 net/core/net-sysfs.c:2059 register_netdevice+0x1191/0x19c0 net/core/dev.c:10298 bond_newlink+0x3b/0x90 drivers/net/bonding/bond_netlink.c:576 rtnl_newlink_create net/core/rtnetlink.c:3506 [inline] __rtnl_newlink net/core/rtnetlink.c:3726 [inline] rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3739 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6606 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3c/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2199 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc3fa87fa9c Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240212140700.2795436-4-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
br_set_lockdep_class() is missing many details. Use generic netdev_lockdep_set_classes() to not worry anymore. Signed-off-by:
-
Eric Dumazet authored
vlan uses vlan_dev_set_lockdep_class() which lacks qdisc_tx_busylock initialization. Use generic netdev_lockdep_set_classes() to not worry anymore. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: use net->dev_by_index in two places Bring "ip link" ordering to /proc/net/dev one (by ifindexes). Do the same for /proc/net/vlan/config v2: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/ ==================== Link: https://lore.kernel.org/r/20240211214404.1882191-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Adopt net->dev_by_index as I did in commit 0e0939c0 ("net-procfs: use xarray iterator to implement /proc/net/dev") This makes sure an existing device is always visible in the dump, regardless of concurrent insertions/deletions. v2: added suggestions from Jakub Kicinski and Ido Schimmel, thanks for the help ! Link: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/ Link: https://lore.kernel.org/all/ZckR-XOsULLI9EHc@shredder/Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20240211214404.1882191-3-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Adopt net->dev_by_index as I did in commit 0e0939c0 ("net-procfs: use xarray iterator to implement /proc/net/dev") Not only this removes quadratic behavior, it also makes sure an existing vlan device is always visible in the dump, regardless of concurrent net->dev_base_head changes. Signed-off-by:
-
- 13 Feb, 2024 7 commits
-
-
Robert Marko authored
PMD Global Transmit Disable bit should be cleared for normal operation. This should be HW default, however I found that on Asus RT-AX89X that uses AQR113C PHY and firmware 5.4 this bit is set by default. With this bit set the AQR cannot achieve a link with its link-partner and it took me multiple hours of digging through the vendor GPL source to find this out, so lets always clear this bit during .config_init() to avoid a situation like this in the future. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Stephen Hemminger authored
The prologue to codel is using BSD-3 clause and GPL-2 boiler plate language. Replace it by using SPDX. The automated treewide scan in commit d2912cb1 ("treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500") did not pickup dual licensed code. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Dave Taht <dave.taht@gmail.com> Link: https://lore.kernel.org/r/20240211172532.6568-1-stephen@networkplumber.orgSigned-off-by:
-
Heiner Kallweit authored
Use core-provided pcpu stats allocation instead of open-coding it in the driver. Signed-off-by:
-
Marc Kleine-Budde authored
Mails to naga.sureshkumar.relli@xilinx.com are bouncing due to a mail loop. Seems Naga Sureshkumar Relli has left the company. Remove Naga Sureshkumar Relli from the xilinx_can driver. Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/all/20240213-xilinx_can-v1-1-79820de803ea@pengutronix.deSigned-off-by:
-
Oliver Hartkopp authored
CAN XL data frames contain an 8-bit virtual CAN network identifier (VCID). A VCID value of zero represents an 'untagged' CAN XL frame. To receive and send these optional VCIDs via CAN_RAW sockets a new socket option CAN_RAW_XL_VCID_OPTS is introduced to define/access VCID content: - tx: set the outgoing VCID value by the kernel (one fixed 8-bit value) - tx: pass through VCID values from the user space (e.g. for traffic replay) - rx: apply VCID receive filter (value/mask) to be passed to the user space With the 'tx pass through' option CAN_RAW_XL_VCID_TX_PASS all valid VCID values can be sent, e.g. to replay full qualified CAN XL traffic. The VCID value provided for the CAN_RAW_XL_VCID_TX_SET option will override the VCID value in the struct canxl_frame.prio defined for CAN_RAW_XL_VCID_TX_PASS when both flags are set. With a rx_vcid_mask of zero all possible VCID values (0x00 - 0xFF) are passed to the user space when the CAN_RAW_XL_VCID_RX_FILTER flag is set. Without this flag only untagged CAN XL frames (VCID = 0x00) are delivered to the user space (default). The 8-bit VCID is stored inside the CAN XL prio element (only in CAN XL frames!) to not interfere with other CAN content or the CAN filters provided by the CAN_RAW sockets and kernel infrastruture. Signed-off-by:
-
Harshit Mogalapalli authored
After this commit ba24ea12 ("net/sched: Retire ipt action") NET_ACT_IPT is not needed anymore as the action is retired and the code is removed. Clean the Kconfig part as well. Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240209180656.867546-1-harshit.m.mogalapalli@oracle.comSigned-off-by:
-
Kurt Kanzenbach authored
Commit 8a7cb245 ("net: stmmac: Do not enable RX FIFO overflow interrupts") disabled the RX FIFO overflow interrupts. However, it left the status variable around, but never checks it. As stmmac_host_mtl_irq_status() returns only 0 now, the code can be simplified. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240208-stmmac_irq-v1-1-8bab236026d4@linutronix.deSigned-off-by:
-
