On EF100, the RX hash field in the packet prefix may not be valid (e.g.
 if the header parse failed), and this is indicated by a one-bit flag
 elsewhere in the packet prefix.  Only call skb_set_hash() if the
 RSS_HASH_VALID bit is set.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.9-20200814' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-08-14

this is a pull request of 6 patches for net/master. All patches fix problems in
the j1939 CAN networking stack.

The first patch is by Eric Dumazet fixes a kernel-infoleak in
j1939_sk_sock2sockaddr_can().

The remaining 5 patches are by Oleksij Rempel and fix recption of j1939
messages not orginated by the stack, a use-after-free in j1939_tp_txtimer(),
ensure that the CAN driver has a ml_priv allocated. These problem were found by
google's syzbot. Further ETP sessions with block size of less than 255 are
fixed and a sanity check was added to j1939_xtp_rx_dat_one() to detect packet
corruption.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull powerpc fix from Michael Ellerman:
 "One fix for a boot crash on some platforms introduced by the recent
  pkey refactoring.

  Thanks to Christian Zigotzky and Aneesh Kumar K.V"

* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)

Pull more xen updates from Juergen Gross:

 - Remove support for running as 32-bit Xen PV-guest.

   32-bit PV guests are rarely used, are lacking security fixes for
   Meltdown, and can be easily replaced by PVH mode. Another series for
   doing more cleanup will follow soon (removal of 32-bit-only pvops
   functionality).

 - Fixes and additional features for the Xen display frontend driver.

* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drm/xen-front: Pass dumb buffer data offset to the backend
  xen: Sync up with the canonical protocol definition in Xen
  drm/xen-front: Add YUYV to supported formats
  drm/xen-front: Fix misused IS_ERR_OR_NULL checks
  xen/gntdev: Fix dmabuf import with non-zero sgt offset
  x86/xen: drop tests for highmem in pv code
  x86/xen: eliminate xen-asm_64.S
  x86/xen: remove 32-bit Xen PV guest support

Pull hyper-v fixes from Wei Liu:

 - fix oops reporting on Hyper-V

 - make objtool happy

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Make hv_setup_sched_clock inline
  Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops

syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:

   KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
   CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
   RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
   Call Trace:
     putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
     genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
     genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
     copy_regset_from_user include/linux/regset.h:326 [inline]
     ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
     compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
     __do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
     __se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
     __ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
     do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
     __do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
     do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
     entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.

The fix is to make sure ldt pointer is not NULL.

Fixes: 07e1d88a ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto fix from Herbert Xu:
 "This fixes a regression in af_alg"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix uninitialized ctx->init

Pull module updates from Jessica Yu:
 "The most important change would be Christoph Hellwig's patch
  implementing proprietary taint inheritance, in an effort to discourage
  the creation of GPL "shim" modules that interface between GPL symbols
  and proprietary symbols.

  Summary:

   - Have modules that use symbols from proprietary modules inherit the
     TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim
     modules that are used to circumvent _GPL exports. These are modules
     that claim to be GPL licensed while also using symbols from
     proprietary modules. Such modules will be rejected while non-GPL
     modules will inherit the proprietary taint.

   - Module export space cleanup. Unexport symbols that are unused
     outside of module.c or otherwise used in only built-in code"

* tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  modules: inherit TAINT_PROPRIETARY_MODULE
  modules: return licensing information from find_symbol
  modules: rename the licence field in struct symsearch to license
  modules: unexport __module_address
  modules: unexport __module_text_address
  modules: mark each_symbol_section static
  modules: mark find_symbol static
  modules: mark ref_module static
  modules: linux/moduleparam.h: drop duplicated word in a comment

Pull Kconfig updates from Masahiro Yamada:

 - remove '---help---' keyword support

 - fix mouse events for 'menuconfig' symbols in search view of qconf

 - code cleanups of qconf

* tag 'kconfig-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: qconf: move setOptionMode() to ConfigList from ConfigView
  kconfig: qconf: do not limit the pop-up menu to the first row
  kconfig: qconf: refactor icon setups
  kconfig: qconf: remove unused voidPix, menuInvPix
  kconfig: qconf: remove ConfigItem::text/setText
  kconfig: qconf: remove ConfigList::addColumn/removeColumn
  kconfig: qconf: remove ConfigItem::pixmap/setPixmap
  kconfig: qconf: drop more localization code
  kconfig: qconf: remove 'parent' from ConfigList::updateMenuList()
  kconfig: qconf: remove unused argument from ConfigView::updateList()
  kconfig: qconf: remove unused argument from ConfigList::updateList()
  kconfig: qconf: omit parent to QHBoxLayout()
  kconfig: qconf: remove name from ConfigSearchWindow constructor
  kconfig: qconf: remove unused ConfigList::listView()
  kconfig: qconf: overload addToolBar() to create and insert toolbar
  kconfig: qconf: remove toolBar from ConfigMainWindow members
  kconfig: qconf: use 'menu' variable for (QMenu *)
  kconfig: qconf: do not use 'menu' variable for (QMenuBar *)
  kconfig: qconf: remove ->addSeparator() to menuBar
  kconfig: add 'static' to some file-local data
  ...

Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.

At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.

With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.

After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.

The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.

Bail out if no ml_priv is allocated.

Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.

If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).

Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.

This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.

Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.

To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123

This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message

With this patch we add additional check to make sure, related skb is own
echo message.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

syzbot found that at least 2 bytes of kernel information
were leaked during getsockname() on AF_CAN CAN_J1939 socket.

Since struct sockaddr_can has in fact two holes, simply
clear the whole area before filling it with useful data.

BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253
CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423
 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253
 instrument_copy_to_user include/linux/instrumented.h:91 [inline]
 _copy_to_user+0x18e/0x260 lib/usercopy.c:39
 copy_to_user include/linux/uaccess.h:186 [inline]
 move_addr_to_user+0x3de/0x670 net/socket.c:237
 __sys_getsockname+0x407/0x5e0 net/socket.c:1909
 __do_sys_getsockname net/socket.c:1920 [inline]
 __se_sys_getsockname+0x91/0xb0 net/socket.c:1917
 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917
 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440219
Code: Bad RIP value.
RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219
RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20
R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000

Local variable ----address@__sys_getsockname created at:
 __sys_getsockname+0x91/0x5e0 net/socket.c:1894
 __sys_getsockname+0x91/0x5e0 net/socket.c:1894

Bytes 2-3 of 24 are uninitialized
Memory access of size 24 starts at ffff8880ba2c7de8
Data copied to user address 0000000020000100

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-can@vger.kernel.org
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

ConfigView::setOptionMode() only gets access to the 'list' member.

Move it to the more relevant ConfigList class.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:

  if (e->y() <= header()->geometry().bottom()) {

Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.

Since the origin of e->y() starts from the bottom of the header,
this check is odd.

Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

These icon data are used by ConfigItem, but stored in each instance
of ConfigView. There is no point to keep the same data in each of 3
instances, "menu", "config", and "search".

Move the icon data to the more relevant ConfigItem class, and make
them static members.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

These are initialized, but not used by anyone.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeWidgetItem::text/setText directly
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeView::showColumn/hideColumn directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeWidgetItem::icon/setIcon directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is a remnant of commit 694c49a7 ("kconfig: drop localization
support").

Get it back to the code prior to commit 3b9fa093 ("[PATCH] Kconfig
i18n support").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

All the call-sites of this function pass 'this' to the first argument.

So, 'parent' is always the 'this' pointer.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Now that ConfigList::updateList() takes no argument, the 'item' argument
ConfigView::updateList() is no longer used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This function allocates 'item' before using it, so the argument 'item'
is always shadowed.

Remove the meaningless argument.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Instead of passing 0 (i.e. nullptr), leave it empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This constructor is only called with "search" as the second argument.

Hard-code the name in the constructor, and drop it from the function
argument.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

I do not know how this function can be useful. In fact, it is unsed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use the overloaded function, addToolBar(const QString &title)
to create a QToolBar object, setting its window title, and inserts
it into the toolbar area.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This pointer is only used in the ConfigMainWindow constructor.

Drop it from the private members.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The variable 'config' for the file menu is inconsistent.

You do not need to use different variables. Use 'menu' for every menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

I think it is a bit confusing to use 'menu' to hold a QMenuBar pointer.
I want to use 'menu' for a QMenu pointer.

You do not need to use a local variable here. Use menuBar() directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

I do not understand the purpose of this ->addSeparator().
It does not make any difference.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Fix some warnings from sparce like follows:

  warning: symbol '...' was not declared. Should it be static?
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

On menu properties mouse events didn't do anything in search view
(listMode).

As there are no menus in listMode we can add an exception in tests to
always change the value on mouse events if we are in listMode.
Signed-off-by: Maxime Chretien <maxime.chretien@bootlin.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Constify arrays as well as strings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit 84af7a61.

The conversion is done.

Cc: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The conversion is done. No more user of '---help---'.

Cc: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull networking fixes from David Miller:
 "Some merge window fallout, some longer term fixes:

   1) Handle headroom properly in lapbether and x25_asy drivers, from
      Xie He.

   2) Fetch MAC address from correct r8152 device node, from Thierry
      Reding.

   3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
      from Rouven Czerwinski.

   4) Correct fdputs in socket layer, from Miaohe Lin.

   5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.

   6) Fix TCP TFO key reading on big endian, from Jason Baron.

   7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.

   8) Fix inet fastreuse optimization with tproxy sockets, from Tim
      Froidcoeur.

   9) Fix 64-bit divide in new SFC driver, from Edward Cree.

  10) Add a tracepoint for prandom_u32 so that we can more easily
      perform usage analysis. From Eric Dumazet.

  11) Fix rwlock imbalance in AF_PACKET, from John Ogness"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
  net: openvswitch: introduce common code for flushing flows
  af_packet: TPACKET_V3: fix fill status rwlock imbalance
  random32: add a tracepoint for prandom_u32()
  Revert "ipv4: tunnel: fix compilation on ARCH=um"
  net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
  net: ethernet: stmmac: Disable hardware multicast filter
  net: stmmac: dwmac1000: provide multicast filter fallback
  ipv4: tunnel: fix compilation on ARCH=um
  vsock: fix potential null pointer dereference in vsock_poll()
  sfc: fix ef100 design-param checking
  net: initialize fastreuse on inet_inherit_port
  net: refactor bind_bucket fastreuse into helper
  net: phy: marvell10g: fix null pointer dereference
  net: Fix potential memory leak in proto_register()
  net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
  ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
  net/nfc/rawsock.c: add CAP_NET_RAW check.
  hinic: fix strncpy output truncated compile warnings
  drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
  net/tls: Fix kmap usage
  ...