- 18 Feb, 2022 40 commits
-
-
Bixuan Cui authored
Fix memdup.cocci warning: ./drivers/net/wireless/intel/iwlwifi/mvm/rfi.c:110:8-15: WARNING opportunity for kmemdup Signed-off-by:
Bixuan Cui <cuibixuan@linux.alibaba.com> Link: https://lore.kernel.org/r/1635317920-84725-1-git-send-email-cuibixuan@linux.alibaba.comSigned-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Xiang wangx authored
Delete the redundant word 'the'. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20211216085756.11053-1-wangxiang@cdjrlc.comSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kmalloc(). For example: struct iwl_wipan_noa_data { ... u8 data[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Reported-by:Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220210060926.1608378-1-chi.minghao@zte.com.cnSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kzalloc(). Reported-by:
-
Cai Huoqing authored
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220209032322.37472-1-cai.huoqing@linux.devSigned-off-by:
-
Dan Carpenter authored
Change the comparison from ">" to ">=" to avoid accessing one element beyond the end of the ->per_mac_stats[] array. Fixes: 6324c173 ("iwlwifi: mvm: add support for statistics update version 15") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220106071825.GA5836@kiliSigned-off-by:
-
Mukesh Sisodiya authored
Send a command to FW once the driver completes the dump collection for the timepoint which requires the command to be send. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Miri Korenblit authored
During disassociation we're decreasing the phy's ref count. If the ref count becomes 0, we're configuring the phy ctxt to the default channel (the lowest channel which the device can operate on). Currently we're not checking whether the the default channel is enabled or not. Fix it by configuring the phy ctxt to the lowest channel which is enabled. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Johannes Berg authored
Due to some issues found in integration, the command now has the (old) station mask and TID in modify/remove instead of the BAID, adjust accordingly. Since we don't use modify yet (and never will with v1 of the API), just add v1 remove inside the existing union, and use that, this way we don't have to duplicate everything, only the remove code. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
This doesn't really exist in the firmware, it's just some leftover from older versions. Remove it. Signed-off-by:
-
Johannes Berg authored
Newer firmware versions will support a new queue allocation command, in order to deal with MLD where multiple stations are used for a single queue. Add support for the new command. This requires some refactoring of the queue allocation API, which now gets - the station mask instead of the station ID - the flags without the "enable" flag, since that's no longer used in the new API Additionally, this new API now requires that we remove queues before removing a station, the firmware will no longer do that internally. Also add support for that. Signed-off-by:
-
Mukesh Sisodiya authored
Support dump size limitation based on the TLV by firmware. This is needed for limited memory systems so only the most important dumps are sent by driver. Signed-off-by:
-
Yaara Baruch authored
The device was defined under Ma instead of So, and add 2 missing killer devices from the 211 family. Signed-off-by:
Yaara Baruch <yaara.baruch@intel.com> Signed-off-by:
-
Abhishek Naik authored
Add logs in rs_fw_rate_init function. It helps in verifying TLC Configuration while debuging TLC related bugs. Update kernel doc for TLC_MNG_CONFIG_CMD with correct version of struct iwl_tlc_config_cmd. Signed-off-by:
Abhishek Naik <abhishek.naik@intel.com> Fixes: ae4c1bb0 ("iwlwifi: rs: add support for TLC config command ver 4") Signed-off-by:
-
Johannes Berg authored
It's always zero, just remove it. Signed-off-by:
-
Johannes Berg authored
The command ID here is always hard-coded to the same, so we can remove it. In the future we actually need to make this configurable, but that doesn't need to be on each call, it can be done through the transport configuration. Signed-off-by:
-
Johannes Berg authored
Use the ERR_PTR() machinery to return the queue or an error, instead of having a separate out parameter. Signed-off-by:
-
Luca Coelho authored
There was a small copy and paste mistake in the doc declaration of iwl_fw_ini_addr_val. Fix it. Signed-off-by:
-
Mordechay Goodstein authored
This info helps for additional info in case we have issues with HPM state at boot time. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The firmware will soon stop removing the session protection for us after association. While this was convenient, it was not symmetric. Always remove the session protection after association, even for devices that support the new API. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
There's no need to have this in a different place, it's only used in a single C file (sta.c). Signed-off-by:
-
Miri Korenblit authored
We are setting the PPE Thresholds in STA_HE_CTXT_CMD according to HE PHY Capabilities IE. As EHT is introduced, we will have to set this thresholds according to EHT PHY Capabilities IE if we're in an EHT connection. Some parts of the code can be used for both HE and EHT. Put this parts in functions which will be used in the patch which adds support for EHT PPE. Signed-off-by:
-
Ayala Barazani authored
The BIOS can contain data about sets of disabled channels. Pass the bitmap to the firmware if present. Signed-off-by:
Ayala Barazani <ayala.barazani@intel.com> Signed-off-by:
-
Mordechay Goodstein authored
This info helps for additional info in case we have issues with OTP at boot time. Signed-off-by:
-
Luca Coelho authored
With the new ML API, we can't send the BAID removal command to firmware during hw_restart because it will cause an assertion failure 0x350D because the BAID doesn't exist at that point. So avoid sending the command if we are performing a hw_restart. Signed-off-by:
-
Emmanuel Grumbach authored
It is yet unclear if the WARNING really points to a real problem, but for sure the stack dump doesn't help fixing it. Just use a regular error print instead. Signed-off-by:
-
Gregory Greenman authored
Sometimes RFIm can be deactivated in FW due to internal errors. In this case, FW will send a notification to the driver about that. Add a log message in this case since FW logs are not always available. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Ilan Peer authored
A scan during active P2P GO operation, i.e., data traffic with clients, can impact the throughput and latency of such traffic. Thus, when scan is requested while there is an active P2P GO and low latency is asserted: - Ask the FW scan logic to respect the P2P GO activity during the scheduling of the scan operation to minimize the impact on the throughput and latency. - Force scan to perform EBS before starting the scan to reduce the number of scanned channels. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Golan Ben Ami authored
Start supporting API version 70 for AX devices. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
-
Ilan Peer authored
As there is not real need to iterate the active interfaces twice. Signed-off-by:
-
Johannes Berg authored
There's another field and so W=2 warns about this code, but in general it's nicer to use C99 initializers anyway to make the code easier to read. Signed-off-by:
-
Johannes Berg authored
There's no point spelling out the same condition twice, so remove the second one. Signed-off-by:
-
Johannes Berg authored
Found with W=2, remove unused macros in C files. In one case move the macro under the corresponding ifdef. Signed-off-by:
-
Johannes Berg authored
There are two versions of the same definitions, with and without IWL_ prefix. Use the ones with IWL_ prefix, keeping the correct comment (microseconds). Signed-off-by:
-
Johannes Berg authored
There's no good reason to pick the opmode first and load this under the mutex, so just load it before continuing. This will let us load it asynchronously more easily later. Signed-off-by:
-
Matti Gottlieb authored
Adapt rx queue write pointer for Bz family. The register has moved to the same one as Tx. Signed-off-by:
Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by:
-
Johannes Berg authored
The Bz devices got a new completion descriptor again since we only ever really used 4 out of 32 bytes anyway. Adjust the code to deal with that. Note that the intention was to reduce the size, but the hardware was implemented wrongly. While at it, do some cleanups and remove the union to simplify the code, clean up iwl_pcie_free_bd_size() to no longer need an argument and add iwl_pcie_used_bd_size() with the logic to selct completion descriptor size. Signed-off-by:
-
Ilan Peer authored
Non PSC channels should generally be scanned based on information about collocated APs obtained during scan on legacy bands, and otherwise should not be scanned unless specifically requested so (as there are relatively many non PSC channels, scanning them passively is time consuming and interferes with regular data traffic). Thus, modify the scan logic to avoid passively scanning PSC channels if there is no information about collocated APs and the scan is not a passive scan. Signed-off-by:
-
Ilan Peer authored
The function iwl_mvm_umac_scan_fill_6g_chan_list() always returns 0. Change its return value to 'void'. Signed-off-by:
-
Mukesh Sisodiya authored
The config set TLV setting depend on dram allocation and if allocation failed the data used in config set tlv should not set this. Adding the check if dram fragment is available or not. Signed-off-by:
-
