- 29 Aug, 2019 6 commits
-
-
Manasi Navare authored
This patch has no functional changes. This just renames the update_crtcs() hooks to commit_modeset_enables() to match the drm_atomic helper naming conventions. v2: * Rebase on drm-tip Suggested-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827221735.29351-2-manasi.d.navare@intel.com
-
Matthew Auld authored
The sg_table for our backing store might contain addresses from stolen-memory or in the future local-memory, at which point this is no longer a dma-iterator. As a consequence we should now break on NULL iter.sgp, instead of dmap == 0 which is considered an invalid dma address. As a bonus, gcc much prefers this construct, Function old new delta gen8_ggtt_insert_entries 211 192 -19 gen6_ggtt_insert_entries 292 262 -30 i915_error_object_create 996 954 -42 Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Fernando Pacheco authored
During normal driver unload we attempt to disable GuC communication while it is currently stopped. This results in a nop'd call to intel_guc_ct_disable within guc_disable_communication because stop/disable rely on the same flag to prevent further comms with CT. We can avoid the call to disable and still leave communication in a satisfactory state by extracting a set of shared steps from stop/disable. This set can include guc_disable_interrupts as we do not require the single caller of guc_stop_communication to be atomic: "drm/i915/selftests: Fixup atomic reset checking". This situation (stop -> disable) only occurs during intel_uc_fini_hw, so during fini, call guc_disable_communication only if currently enabled. The symmetric calls to enable/disable remain unmodified for all other scenarios. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943Signed-off-by:
Fernando Pacheco <fernando.pacheco@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Chris Wilson authored
Let the scheduler have a breather in between passes of the longer buddy tests. Important if we are running under kasan etc and this takes far longer than usual! Signed-off-by:
-
José Roberto de Souza authored
According to BSpc if link standby is set on TGL+, PSR will not be enabled. Vendors should not use panels that requires link standby and even if they do, panel should assert a PSR error that will cause PSR to be disabled. BSpec: 50434 Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-8-lucas.demarchi@intel.com
-
Dhinakaran Pandiyan authored
Yf tiling was removed in gen-12, so do not expose Yf modifiers to user space. Gen-12 display also is incompatible with pre-gen12 Y-tiled CCS, so do not expose I915_FORMAT_MOD_Y_TILED_CCS. v2: Rebase to carry forward recently added gen11 formats. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 28 Aug, 2019 8 commits
-
-
Madhumitha Tolakanahalli Pradeep authored
DSC was not supported on Pipe A for previous platforms. Tigerlake onwards, all the pipes support DSC. Hence, the DSC and FEC restriction on Pipe A needs to be removed. v2: Changes in the logic around removing the restriction around Pipe A (Manasi, Lucas) Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Reviewed-by:
-
Chris Wilson authored
Trust our own workers to not cause unnecessary delays and disable the automatic timeout on their asynchronous fence waits. (Along the same lines that we trust our own requests to complete eventually, if necessary by force.) Signed-off-by:
-
Imre Deak authored
There is a difference in BSpec's and the driver's designation of DDI ports. BSpec uses the following names: - before GEN11: BSpec/driver: port A/B/C/D etc - GEN11: BSpec/driver: port A-F - GEN12: BSpec: port A/B/C for combo PHY ports port TC1-6 for Type C PHY ports driver: port A-I. The driver's port D name matches BSpec's TC1 port name. So far power domains were named according to the BSpec designation, to make it easier to match the code against the specification. That however can be confusing when a power domain needs to be matched to a port on GEN12+. To resolve that use the driver's port A-I designation for power domain names too and rename the corresponding power wells so that they reflect the mapping from the driver's to BSpec's port name. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823100711.27833-1-imre.deak@intel.com
-
Chris Wilson authored
We've been ignoring similar coherency issues in IGT for Broadwater, and specifically Broadwater (original gen4) and not, for example, Crestline (same generation as Broadwater, but the mobile variant). Without any means to reproduce locally (I have a 965GM but alas no 965G), fixing will be slow, so tell CI to ignore any failure until we are ready with a fix. Signed-off-by:
-
Mika Kuoppala authored
Our current avoidance of non readable mcr range was not inclusive enough. Extend the start and end. References: HSDES#1405586840 Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
Chris Wilson authored
Quite rarely we see that the CS completion event fires before the breadcrumb is coherent, which presumably is a result of the CS_STALL not waiting for the post-sync operation. Try throwing in a DC_FLUSH into the following pipecontrol to see if that makes any difference. Signed-off-by:
-
Chris Wilson authored
igt_ctx_exec allocates a new context for each iteration, keeping them all allocated until the end. Instead, release the local ctx reference at the end of each iteration, allowing ourselves to reap those if under mempressure. Signed-off-by:
-
Chris Wilson authored
Upon object creation for live_gem_contexts, we fill the object with known scratch and flush it out of the CPU cache. Before performing the GPU fill, we don't need to flush it again and so avoid serialising with previous fills. However, we do need some throttling on the internal interfaces if we do not want to run out of memory! Signed-off-by:
-
- 27 Aug, 2019 14 commits
-
-
Daniele Ceraolo Spurio authored
The CS pre-parser can pre-fetch commands across memory sync points and starting from gen12 it is able to pre-fetch across BB_START and BB_END boundaries as well, so when we emit gpu relocs the pre-parser might fetch the target location of the reloc before the memory write lands. The parser can't pre-fetch across the ctx switch, so we use a separate context to guarantee that the memory is synchronized before the parser can get to it. Note that there is no risk of the CS doing a lite restore from the reloc context to the user context, even if the two have the same hw_id, because since gen11 the CS also checks the LRCA when deciding if it can lite-restore. v2: limit new context to gen12+, release in eb_destroy, add a comment in emit_fini_breadcrumb (Chris). Suggested-by: -
Michel Thierry authored
Compared to Icelake, Tigerlake's MAX_CONTEXT_HW_ID is smaller by one, but since we just use the upper 32 bits of the lrc_desc, it's guaranteed OA will use the correct one. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-19-lucas.demarchi@intel.com
-
Michel Thierry authored
Workaround no longer needed (plus L3_LRA_1_GPGPU doesn't exist). Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-17-lucas.demarchi@intel.com
-
José Roberto de Souza authored
On TGL some registers moved from DDI to transcoder and the DisplayPort training sequence has a separate BSpec page. I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but it was becoming really hard to follow, so a new and cleaner function for TGL was added with comments of all steps. It's similar to ICL, but different enough to deserve a new function. The rest of DisplayPort enable and the whole disable sequences remained the same. v2: FEC and DSC should be enabled on sink side before start link training(Maarten reported and Manasi confirmed the DSC part) v3: Add call to enable FEC on step 7.l(Manasi) BSpec: 49190 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
Disable CRTC/pipes in reverse order because some features (MST in TGL+) requires master and slave relationship between pipes, so it should always pick the lowest pipe as master as it will be enabled first and disable in the reverse order so the master will be the last one to be disabled. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-13-lucas.demarchi@intel.com
-
José Roberto de Souza authored
Same as for_each_oldnew_intel_crtc_in_state() but iterates in reverse order. v2: Fix additional blank line v3: Rebase Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
TGL PSR2 HW supports a bigger resolution, so lets add it BSpec: 50422, 49199 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This fix unclaimed access warnings: [ 245.525788] ------------[ cut here ]------------ [ 245.525884] Unclaimed read from register 0x62900 [ 245.526154] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915] [ 245.526160] Modules linked in: i915 x86_pkg_temp_thermal ax88179_178a coretemp usbnet crct10dif_pclmul mii crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: i915] [ 245.526191] CPU: 0 PID: 1234 Comm: kms_fullmodeset Not tainted 5.1.0-rc6+ #915 [ 245.526197] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWR1.D00.2081.A10.1904182155 04/18/2019 [ 245.526273] RIP: 0010:__unclaimed_reg_debug+0x40/0x50 [i915] [ 245.526281] Code: 74 05 5b 5d 41 5c c3 45 84 e4 48 c7 c0 76 97 21 a0 48 c7 c6 6c 97 21 a0 89 ea 48 0f 44 f0 48 c7 c7 7f 97 21 a0 e8 4f 1e fe e0 <0f> 0b 83 2d 6f d9 1c 00 01 5b 5d 41 5c c3 66 90 41 57 41 56 41 55 [ 245.526288] RSP: 0018:ffffc900006bf7d8 EFLAGS: 00010086 [ 245.526297] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 245.526304] RDX: 0000000000000007 RSI: 0000000000000000 RDI: 00000000ffffffff [ 245.526310] RBP: 0000000000061900 R08: 0000000000000000 R09: 0000000000000001 [ 245.526317] R10: 0000000000000006 R11: 0000000000000000 R12: 0000000000000001 [ 245.526324] R13: 0000000000000000 R14: ffff8882914f0d58 R15: 0000000000000206 [ 245.526332] FS: 00007fed2a3c39c0(0000) GS:ffff8882a8600000(0000) knlGS:0000000000000000 [ 245.526340] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 245.526347] CR2: 00007fed28dff000 CR3: 00000002a086c006 CR4: 0000000000760ef0 [ 245.526354] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 245.526361] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 245.526367] PKRU: 55555554 [ 245.526373] Call Trace: [ 245.526454] gen11_fwtable_read32+0x219/0x250 [i915] [ 245.526576] intel_psr_activate+0x57/0x400 [i915] [ 245.526697] intel_psr_enable_locked+0x367/0x4b0 [i915] [ 245.526828] intel_psr_enable+0xa4/0xd0 [i915] [ 245.526946] intel_enable_ddi+0x127/0x2f0 [i915] [ 245.527075] intel_encoders_enable.isra.79+0x62/0x90 [i915] [ 245.527202] haswell_crtc_enable+0x2a2/0x850 [i915] [ 245.527337] intel_update_crtc+0x51/0x360 [i915] [ 245.527466] skl_update_crtcs+0x26c/0x300 [i915] [ 245.527603] intel_atomic_commit_tail+0x3e5/0x13c0 [i915] [ 245.527757] intel_atomic_commit+0x24d/0x2d0 [i915] [ 245.527782] drm_atomic_helper_set_config+0x7b/0x90 [ 245.527799] drm_mode_setcrtc+0x1b4/0x6f0 [ 245.527856] ? drm_mode_getcrtc+0x180/0x180 [ 245.527867] drm_ioctl_kernel+0xad/0xf0 [ 245.527886] drm_ioctl+0x2f4/0x3b0 [ 245.527902] ? drm_mode_getcrtc+0x180/0x180 [ 245.527935] ? rcu_read_lock_sched_held+0x6f/0x80 [ 245.527956] do_vfs_ioctl+0xa0/0x6d0 [ 245.527970] ? __task_pid_nr_ns+0xb6/0x200 [ 245.527991] ksys_ioctl+0x35/0x70 [ 245.528009] __x64_sys_ioctl+0x11/0x20 [ 245.528020] do_syscall_64+0x55/0x180 [ 245.528034] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 245.528042] RIP: 0033:0x7fed2cc7c3c7 [ 245.528050] Code: 00 00 90 48 8b 05 c9 3a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 99 3a 0d 00 f7 d8 64 89 01 48 [ 245.528057] RSP: 002b:00007ffe36944378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 245.528067] RAX: ffffffffffffffda RBX: 00007ffe369443b0 RCX: 00007fed2cc7c3c7 [ 245.528074] RDX: 00007ffe369443b0 RSI: 00000000c06864a2 RDI: 0000000000000003 [ 245.528081] RBP: 00007ffe369443b0 R08: 0000000000000000 R09: 0000564c0173ae98 [ 245.528088] R10: 0000564c0173aeb8 R11: 0000000000000246 R12: 00000000c06864a2 [ 245.528095] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [ 245.528128] irq event stamp: 140866 [ 245.528138] hardirqs last enabled at (140865): [<ffffffff819a63dc>] _raw_spin_unlock_irqrestore+0x4c/0x60 [ 245.528148] hardirqs last disabled at (140866): [<ffffffff819a624d>] _raw_spin_lock_irqsave+0xd/0x50 [ 245.528158] softirqs last enabled at (140860): [<ffffffff81c0038c>] __do_softirq+0x38c/0x499 [ 245.528170] softirqs last disabled at (140853): [<ffffffff810b4a09>] irq_exit+0xa9/0xc0 [ 245.528247] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915] [ 245.528254] ---[ end trace 366069676e98a410 ]--- Signed-off-by:
-
José Roberto de Souza authored
On TGL+ it's possible to have PSR1 enabled in other ports besides DDIA. PSR2 is still limited to DDIA. However currently we handle only one instance of PSR struct. Lets guard intel_psr_init_dpcd() against multiple eDP panels and warn about it. v2: Reword commit message to be TGL+ only and with the info where PSR1/PSR2 are supported (Lucas) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
A virtual engine itself does not have a batch pool, but we can gleefully use any of its siblings instead. Signed-off-by:
-
Chris Wilson authored
The point of debug_object_activate is to mark the first, and only the first, acquisition. The object then remains active until the last release. However, we marked up all successful first acquires even though we allowed concurrent parties to try and acquire the i915_active simultaneously (serialised by the i915_active.mutex). Testcase: igt/gem_mmap_gtt/fault-concurrent Signed-off-by:
-
Chris Wilson authored
If we create a new live_context() we should have a mapping for each engine. Document that assumption with an assertion. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chris Wilson authored
The intention is that we first try to pin the current vma into the mappable aperture only if it is already in use or it fits in the free space and will not cause contention. The first attempt was meant to be using PIN_NOEVICT to reuse the current vma if possible, following up with different eviction strategies. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111485 Fixes: 6846895f ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT") Signed-off-by:
-
Chris Wilson authored
To properly handle asynchronous migration of batch objects, we need to couple the fences on the incoming batch into the request and should not assume that they always start idle. Signed-off-by:
-
- 26 Aug, 2019 1 commit
-
-
Lyude Paul authored
Currently, we don't call dma_set_max_seg_size() for i915 because we intentionally do not limit the segment length that the device supports. However, this results in a warning being emitted if we try to map anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG enabled: [ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] [ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x20f/0x340 This was originally brought up on https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus there was it wasn't really useful to set a limit (and that dma-debug isn't really all that useful for i915 in the first place). Unfortunately though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for various distro kernels. Since a WARN_ON() will disable automatic problem reporting (and cause any CI with said option enabled to start complaining), we really should just fix the problem. Note that as me and Chris Wilson discussed, the other solution for this would be to make DMA-API not make such assumptions when a driver hasn't explicitly set a maximum segment size. But, taking a look at the commit which originally introduced this behavior, commit 78c47830 ("dma-debug: check scatterlist segments"), there is an explicit mention of this assumption and how it applies to devices with no segment size: Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. So unless there's any concerns (I'm open to discussion!), let's just follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit to silence any warnings. Changes since v3: * Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like just turning it on causes the kernel to spit out bogus WARN_ONs() during some igt tests which would otherwise require teaching igt to disable the various DMA-API debugging options causing this. This is too much work to be worth it, since DMA-API debugging is useless for us. So, we'll just settle with this single patch to squelch WARN_ONs() during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned on for some reason. * Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris Wilson Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
-
- 24 Aug, 2019 2 commits
-
-
Xiaolin Zhang authored
vgpu ppgtt notification was split into 2 steps, the first step is to update PVINFO's pdp register and then write PVINFO's g2v_notify register with action code to tirgger ppgtt notification to GVT side. currently these steps were not atomic operations due to no any protection, so it is easy to enter race condition state during the MTBF, stress and IGT test to cause GPU hang. the solution is to add a lock to make vgpu ppgtt notication as atomic operation. Cc: stable@vger.kernel.org Signed-off-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Acked-by:
-
Chris Wilson authored
Avoid having to pass around (ctx, engine) everywhere by passing the actual intel_context we intend to use. Today we preach this lesson to igt_gpu_fill_dw and its callers' callers. The immediate benefit for the GEM selftests is that we aim to use the GEM context as the control, the source of the engines on which to test the GEM context. Signed-off-by:
-
- 23 Aug, 2019 9 commits
-
-
Chris Wilson authored
Ensure that the drm_i915_file_private continues to exist as we attempt to remove a request from its list, which may race with the destruction of the file. <6> [38.380714] [IGT] gem_ctx_create: starting subtest basic-files <0> [42.201329] BUG: spinlock bad magic on CPU#0, kworker/u16:0/7 <4> [42.201356] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [42.201371] CPU: 0 PID: 7 Comm: kworker/u16:0 Tainted: G U 5.3.0-rc5-CI-Patchwork_14169+ #1 <4> [42.201391] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007 <4> [42.201594] Workqueue: i915 retire_work_handler [i915] <4> [42.201614] RIP: 0010:spin_dump+0x5a/0x90 <4> [42.201625] Code: 00 48 8d 88 c0 06 00 00 48 c7 c7 00 71 09 82 e8 35 ef 00 00 48 85 db 44 8b 4d 08 41 b8 ff ff ff ff 48 c7 c1 0b cd 0f 82 74 0e <44> 8b 83 e0 04 00 00 48 8d 8b c0 06 00 00 8b 55 04 48 89 ee 48 c7 <4> [42.201660] RSP: 0018:ffffc9000004bd80 EFLAGS: 00010202 <4> [42.201673] RAX: 0000000000000031 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffff820fcd0b <4> [42.201688] RDX: 0000000000000000 RSI: ffff88803de266f8 RDI: 00000000ffffffff <4> [42.201703] RBP: ffff888038381ff8 R08: 00000000ffffffff R09: 000000006b6b6b6b <4> [42.201718] R10: 0000000041cb0b89 R11: 646162206b636f6c R12: ffff88802a618500 <4> [42.201733] R13: ffff88802b32c288 R14: ffff888038381ff8 R15: ffff88802b32c250 <4> [42.201748] FS: 0000000000000000(0000) GS:ffff88803de00000(0000) knlGS:0000000000000000 <4> [42.201765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [42.201778] CR2: 00007f2cefc6d180 CR3: 00000000381ee000 CR4: 00000000000006f0 <4> [42.201793] Call Trace: <4> [42.201805] do_raw_spin_lock+0x66/0xb0 <4> [42.201898] i915_request_retire+0x548/0x7c0 [i915] <4> [42.201989] retire_requests+0x4d/0x60 [i915] <4> [42.202078] i915_retire_requests+0x144/0x2e0 [i915] <4> [42.202169] retire_work_handler+0x10/0x40 [i915] Recently, in commit 44c22f3f ("drm/i915: Serialize insertion into the file->mm.request_list"), we fixed a race on insertion. Now, it appears we also have a race with destruction! Signed-off-by:
-
Daniele Ceraolo Spurio authored
First uc firmware release for EHL. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Chris Wilson authored
Our fence management is lazy, very lazy. If the user marks an object as untiled, we do not immediately flush the fence but merely mark it as dirty. On the next use we have to remember to check and remove the fence, by which time we hope it is idle and we do not have to wait. v2: Throw away the old fence on the next ggtt_pin. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468 Fixes: 1f7fd484 ("drm/i915: Replace i915_vma_put_fence()") Signed-off-by:
-
Chris Wilson authored
In order for the Braswell top-level PD to remain the same from the time of request construction to its submission onto HW, as we may be asynchronously rewriting the page tables (thus changing the expected register state after having already stored the old addresses in the request), the top level PD must be preallocated. So wave goodbye to our lazy allocation of those 4x2 pages. v2: A little bit of write-flushing required (presumably it always has been required, but now we are more susceptible and it is showing up!) v3: Put back the forced-PD-reload on every batch, we can't survive without it and explicitly marking the context for PD reload makes Braswell turn nasty. Signed-off-by:
-
Chris Wilson authored
Sadly lockdep records when the irqs are re-enabled and then marks up the fake lock as being irq-unsafe. Our hand is forced and so we must mark up the entire fake lock critical section as irq-off. Hopefully this is the last tweak required! v2: Not quite, we need to mark the timeline spinlock as irqsafe. That was a genuine bug being hidden by the earlier lockdep splat. Fixes: d6773926 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe") Signed-off-by:
-
Ville Syrjälä authored
Use hweight8() instead of hweight32() for 8bit masks. Doesn't actually matter for us since the arch code will go for hweight32() anyway, but maybe we stil want to do this for documentation purposes? Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Set a good example and talk about pipes rather than crtcs. Signed-off-by:
-
Ville Syrjälä authored
Replace all "int pipe"s with "enum pipe pipe"s to make it clear what we're dealing with. Signed-off-by:
-
Ville Syrjälä authored
The "pipe" argument passed in by the vblank code is in fact the crtc index. Don't assume that is the same as the pipe. Signed-off-by:
-
