Adjust the panel mode setup to match the behavior
of the vbios.  Rather than checking for specific
bridge chip ids, just check the eDP configuration register.
This saves extra aux transactions and works across
DP bridge chips without requiring additional per chip
id checking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Power gating is per crtc pair, but the powergating registers
should be called individually.  The hw handles power up/down
properly.  The pair is powered up if either crtc in the pair
is powered up and the pair is not powered down until both
crtcs in the pair are powered down.  This simplifies
programming and should save additional power as the previous
code never actually power gated the crtc pair.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The ordering is important and the current drm code
wasn't cutting it for modern DIG encoders.  We need
to have information about crtc before setting up
the encoders so I've shifted the ordering a bit.
Probably we'll need a full rework akin to danvet's
recent intel patchs.  This patch fixes numerous
issues with DP bridge chips and makes link training
much more reliable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some plls are shared for DP.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This should help catch uninitialized registers and reject commands
because of that.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Daniel writes:

"Just a few smaller things:
- Fix up a pipe vs. plane confusion from a refactoring, fixes a regression
  from 3.1 (Anhua Xu).
- Fix ivb sprite pixel formats (Vijay).
- Fixup ppgtt pde placement for machines where the Bios artifically limits
  the availbale gtt space in the name of ... product differentiation
  (Chris). This fixes an oops.
- Yet another no_lvds quirk entry."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
  drm/i915: Use the correct size of the GTT for placing the per-process entries
  drm/i915: fix color order for BGR formats on IVB
  drm/i915: fix wrong order of parameters in port checking functions

Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

Ben says its just a single fix to avoid the wrong pcopy units being used.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nvc0/copy: check PUNITS to determine which copy engines are disabled

On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist.  And if
what I've seen on Kepler is true of Fermi too, chipsets of the same type
can have different PCOPY units available.

This should fix a v3.5 regression reported by a number of people effecting
suspend/resume on NVC8/NVCE chipsets.

Cc: stable@vger.kernel.org [3.5]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This board is incorrectly detected as having an LVDS connector,
resulting in the VGA output (the only available output on the board)
showing the console only in the top-left 1024x768 pixels, and an extra
LVDS connector appearing in X.

It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10
chipset.

I've had this board for about a year, but this is the first time I
noticed the issue because I've been running it headless for most of its
life.
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>

The current layout is to place the per-process tables at the end of the
GTT. However, this is currently using a hardcoded maximum size for the GTT
and not taking in account limitations imposed by the BIOS. Use the value
for the total number of entries allocated in the table as provided by
the configuration registers.
Reported-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Matthew Garret <mjg@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

DRM_MODE() macro doesn't initialize the type of the base drm object.
When a copy is made of the mode, the object type is overwritten with
zero, and the the object can no longer be found by
drm_mode_object_find() due to the type check failing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is already fixed for ILK and SNB in the below commit but somehow
IVB is missed.

commit ab2f9df1
	Author: Jesse Barnes <jbarnes@virtuousgeek.org>
	Date:   Mon Feb 27 12:40:10 2012 -0800

	drm/i915: fix color order for BGR formats on SNB

Had the wrong bits and field definitions.
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Antti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Wrong order of parameters passed-in when calling hdmi/adpa
/lvds_pipe_enabled(), 2nd and 3rd parameters are reversed.

This bug was indroduced by

commit 1519b995
Author: Keith Packard <keithp@keithp.com>
Date:   Sat Aug 6 10:35:34 2011 -0700

    drm/i915: Fix PCH port pipe select in CPT disable paths

The reachable tag for this commit is v3.1-rc1-3-g1519b995Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876Tested-by: Daniel Schroeder <sec@dschroeder.info>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull drm fixes from Dave Airlie:
 "Intel: edid fixes, power consumption fix, s/r fix, haswell fix

  Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better
  MSAA validation, lockup timeout fixes, modesetting fixes

  One udl dpms fix, one vmwgfx fix, a couple of trivial core changes.

  There is an export added to ACPI as part of the radeon bios fixes.

  I've also included the fbcon flashing cursor vs deinit race fix, that
  seems the simplest place to start"

Trivial conflict in drivers/video/console/fbcon.c due to me having
already applied the fbcon flashing cursor vs deinit race fix, and Dave
had added a comment in there too.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits)
  fbcon: fix race condition between console lock and cursor timer (v1.1)
  drm: Add missing static storage class specifiers in drm_proc.c file
  drm/udl: dpms off the crtc when disabled.
  drm: Remove two unused fields from struct drm_display_mode
  drm: stop vmgfx driver explosion
  drm/radeon/ss: use num_crtc rather than hardcoded 6
  Revert "drm/radeon: fix bo creation retry path"
  drm/i915: use hsw rps tuning values everywhere on gen6+
  drm/radeon: split ATRM support out from the ATPX handler (v3)
  drm/radeon: convert radeon vfct code to use acpi_get_table_with_size
  ACPI: export symbol acpi_get_table_with_size
  drm/radeon: implement ACPI VFCT vbios fetch (v3)
  drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping
  drm/radeon: fix checking of MSAA renderbuffers on r600-r700
  drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700
  drm/radeon: init lockup timeout on ring init
  drm/radeon: avoid turning off spread spectrum for used pll
  drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads
  drm/i915: extract connector update from intel_ddc_get_modes() for reuse
  drm/i915: fix hsw uncached pte
  ...

Pull SCSI target fixes from Nicholas Bellinger:
 "The executive summary includes:

   - Post-merge review comments for tcm_vhost (MST + nab)
   - Avoid debugging overhead when not debugging for tcm-fc(FCoE) (MDR)
   - Fix NULL pointer dereference bug on alloc_page failulre (Yi Zou)
   - Fix REPORT_LUNs regression bug with pSCSI export (AlexE + nab)
   - Fix regression bug with handling of zero-length data CDBs (nab)
   - Fix vhost_scsi_target structure alignment (MST)

  Thanks again to everyone who contributed a bugfix patch, gave review
  feedback on tcm_vhost code, and/or reported a bug during their own
  testing over the last weeks.

  There is one other outstanding bug reported by Roland recently related
  to SCSI transfer length overflow handling, for which the current
  proposed bugfix has been left in queue pending further testing with
  other non iscsi-target based fabric drivers.

  As the patch is verified with loopback (local SGL memory from SCSI
  LLD) + tcm_qla2xxx (TCM allocated SGL memory mapped to PCI HW) fabric
  ports, it will be included into the next 3.6-rc-fixes PULL request."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Remove unused se_cmd.cmd_spdtl
  tcm_fc: rcu_deref outside rcu lock/unlock section
  tcm_vhost: Fix vhost_scsi_target structure alignment
  target: Fix regression bug with handling of zero-length data CDBs
  target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough
  tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char *
  target: fix NULL pointer dereference bug alloc_page() fails to get memory
  tcm_fc: Avoid debug overhead when not debugging
  tcm_vhost: Post-merge review changes requested by MST
  tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl

Pull i2c-embedded fixes from Wolfram Sang:
 "Some bugfixes for the "embedded" part of the I2C subsystem.  The fixes
  affect mostly drivers which have been largely reworked lately and
  where regressions appeared."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP
  i2c: diolan-u2c: Fix master_xfer return code
  I2C: OMAP: xfer: fix runtime PM get/put balance on error
  i2c: nomadik: Add default configuration into the Nomadik I2C driver

Pull pwm fixes from Thierry Reding:
 "These patches fix the Samsung PWM driver and perform some minor
  cleanups like fixing checkpatch and sparse warnings.

  Two redundant error messages are removed and the Kconfig help text for
  the PWM subsystem is made more descriptive."

* tag 'for-3.6-rc3' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: Improve Kconfig help text
  pwm: core: Fix coding style issues
  pwm: vt8500: Fix coding style issue
  pwm: Remove a redundant error message when devm_request_and_ioremap fails
  pwm: samsung: add missing device pointer to struct pwm_chip
  pwm: Add missing static storage class specifiers in core.c file

Pull ceph fixes from Sage Weil:
 "Jim's fix closes a narrow race introduced with the msgr changes.  One
  fix resolves problems with debugfs initialization that Yan found when
  multiple client instances are created (e.g., two clusters mounted, or
  rbd + cephfs), another one fixes problems with mounting a nonexistent
  server subdirectory, and the last one fixes a divide by zero error
  from unsanitized ioctl input that Dan Carpenter found."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: avoid divide by zero in __validate_layout()
  libceph: avoid truncation due to racing banners
  ceph: tolerate (and warn on) extraneous dentry from mds
  libceph: delay debugfs initialization until we learn global_id

Pull NFS client bugfixes from Trond Myklebust:
 - NFSv3 mounts need to fail if the FSINFO rpc call fails
 - Ensure that the NFS commit cache gets torn down when we unload the
   NFS module.
 - Fix memory scribble issues when interrupting a LAYOUTGET rpc call
 - Fix NFSv4 legacy idmapper regressions
 - Fix issues with the NFSv4 getacl command
 - Fix a regression when using the legacy "mount -t nfs4"

* tag 'nfs-for-3.6-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv3: Ensure that do_proc_get_root() reports errors correctly
  NFSv4: Ensure that nfs4_alloc_client cleans up on error.
  NFS: return -ENOKEY when the upcall fails to map the name
  NFS: Clear key construction data if the idmap upcall fails
  NFSv4: Don't use private xdr_stream fields in decode_getacl
  NFSv4: Fix the acl cache size calculation
  NFSv4: Fix pointer arithmetic in decode_getacl
  NFS: Alias the nfs module to nfs4
  NFS: Fix a regression when loading the NFS v4 module
  NFSv4.1: Remove a bogus BUG_ON() in nfs4_layoutreturn_done
  pnfs-obj: Better IO pattern in case of unaligned offset
  NFS41: add pg_layout_private to nfs_pageio_descriptor
  pnfs: nfs4_proc_layoutget returns void
  pnfs: defer release of pages in layoutget
  nfs: tear down caches in nfs_init_writepagecache when allocation fails

Pull assorted fixes - mostly vfs - from Al Viro:
 "Assorted fixes, with an unexpected detour into vfio refcounting logics
  (fell out when digging in an analog of eventpoll race in there)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  task_work: add a scheduling point in task_work_run()
  fs: fix fs/namei.c kernel-doc warnings
  eventpoll: use-after-possible-free in epoll_create1()
  vfio: grab vfio_device reference *before* exposing the sucker via fd_install()
  vfio: get rid of vfio_device_put()/vfio_group_get_device* races
  vfio: get rid of open-coding kref_put_mutex
  introduce kref_put_mutex()
  vfio: don't dereference after kfree...
  mqueue: lift mnt_want_write() outside ->i_mutex, clean up a bit

It seems commit 4a9d4b02 (switch fput to task_work_add) reintroduced
the problem addressed in commit 944be0b2 (close_files(): add scheduling
point)

If a server process with a lot of files (say 2 million tcp sockets)
is killed, we can spend a lot of time in task_work_run() and trigger
a soft lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix kernel-doc warnings in fs/namei.c:

Warning(fs/namei.c:360): No description found for parameter 'inode'
Warning(fs/namei.c:672): No description found for parameter 'nd'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc:	Alexander Viro <viro@zeniv.linux.org.uk>
Cc:	linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

As soon as we'd installed the file into descriptor table, it can
get closed by another thread.  Freeing ep in process...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

It's not critical (anymore) since another thread closing the file will block
on ->device_lock before it gets to dropping the final reference, but it's
definitely cleaner that way...
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

we really need to make sure that dropping the last reference happens
under the group->device_lock; otherwise a loop (under device_lock)
might find vfio_device instance that is being freed right now, has
already dropped the last reference and waits on device_lock to exclude
the sucker from the list.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

equivalent of
	mutex_lock(mutex);
	if (!kref_put(kref, release))
		mutex_unlock(mutex);
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

So we've had a fair few reports of fbcon handover breakage between
efi/vesafb and i915 surface recently, so I dedicated a couple of
days to finding the problem.

Essentially the last thing we saw was the conflicting framebuffer
message and that was all.

So after much tracing with direct netconsole writes (printks
under console_lock not so useful), I think I found the race.

Thread A (driver load)    Thread B (timer thread)
  unbind_con_driver ->              |
  bind_con_driver ->                |
  vc->vc_sw->con_deinit ->          |
  fbcon_deinit ->                   |
  console_lock()                    |
      |                             |
      |                       fbcon_flashcursor timer fires
      |                       console_lock() <- blocked for A
      |
      |
fbcon_del_cursor_timer ->
  del_timer_sync
  (BOOM)

Of course because all of this is under the console lock,
we never see anything, also since we also just unbound the active
console guess what we never see anything.

Hopefully this fixes the problem for anyone seeing vesafb->kms
driver handoff.

v1.1: add comment suggestion from Alan.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge fixes from Andrew Morton.

Random drivers and some VM fixes.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (17 commits)
  mm: compaction: Abort async compaction if locks are contended or taking too long
  mm: have order > 0 compaction start near a pageblock with free pages
  rapidio/tsi721: fix unused variable compiler warning
  rapidio/tsi721: fix inbound doorbell interrupt handling
  drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode
  mm: correct page->pfmemalloc to fix deactivate_slab regression
  drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes
  mm/compaction.c: fix deferring compaction mistake
  drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources
  string: do not export memweight() to userspace
  hugetlb: update hugetlbpage.txt
  checkpatch: add control statement test to SINGLE_STATEMENT_DO_WHILE_MACRO
  mm: hugetlbfs: correctly populate shared pmd
  cciss: fix incorrect scsi status reporting
  Documentation: update mount option in filesystem/vfat.txt
  mm: change nr_ptes BUG_ON to WARN_ON
  cs5535-clockevt: typo, it's MFGPT, not MFPGT

Pull media fixes from Mauro Carvalho Chehab:
 "For bug fixes, at soc_camera, si470x, uvcvideo, iguanaworks IR driver,
  radio_shark Kbuild fixes, and at the V4L2 core (radio fixes)."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media: soc_camera: don't clear pix->sizeimage in JPEG mode
  [media] media: mx2_camera: Fix clock handling for i.MX27
  [media] video: mx2_camera: Use clk_prepare_enable/clk_disable_unprepare
  [media] video: mx1_camera: Use clk_prepare_enable/clk_disable_unprepare
  [media] media: mx3_camera: buf_init() add buffer state check
  [media] radio-shark2: Only compile led support when CONFIG_LED_CLASS is set
  [media] radio-shark: Only compile led support when CONFIG_LED_CLASS is set
  [media] radio-shark*: Call cancel_work_sync from disconnect rather then release
  [media] radio-shark*: Remove work-around for dangling pointer in usb intfdata
  [media] Add USB dependency for IguanaWorks USB IR Transceiver
  [media] Add missing logging for rangelow/high of hwseek
  [media] VIDIOC_ENUM_FREQ_BANDS fix
  [media] mem2mem_testdev: fix querycap regression
  [media] si470x: v4l2-compliance fixes
  [media] DocBook: Remove a spurious character
  [media] uvcvideo: Reset the bytesused field when recycling an erroneous buffer

Pull networking update from David Miller:
 "A couple weeks of bug fixing in there.  The largest chunk is all the
  broken crap Amerigo Wang found in the netpoll layer."

 1) netpoll and it's users has several serious bugs:
    a) uses GFP_KERNEL with locks held
    b) interfaces requiring interrupts disabled are called with them
       enabled
    c) and vice versa
    d) VLAN tag demuxing, as per all other RX packet input paths, is not
       applied

    All from Amerigo Wang.

 2) Hopefully cure the ipv4 mapped ipv6 address TCP early demux bugs for
    good, from Neal Cardwell.

 3) Unlike AF_UNIX, AF_PACKET sockets don't set a default credentials
    when the user doesn't specify one explicitly during sendmsg().
    Instead we attach an empty (zero) SCM credential block which is
    definitely not what we want.  Fix from Eric Dumazet.

 4) IPv6 illegally invokes netdevice notifiers with RCU lock held, fix
    from Ben Hutchings.

 5) inet_csk_route_child_sock() checks wrong inet options pointer, fix
    from Christoph Paasch.

 6) When AF_PACKET is used for transmit, packet loopback doesn't behave
    properly when a socket fanout is enabled, from Eric Leblond.

 7) On bluetooth l2cap channel create failure, we leak the socket, from
    Jaganath Kanakkassery.

 8) Fix all the netprio file handling bugs found by Al Viro, from John
    Fastabend.

 9) Several error return and NULL deref bug fixes in networking drivers
    from Julia Lawall.

10) A large smattering of struct padding et al.  kernel memory leaks to
    userspace found of Mathias Krause.

11) Conntrack expections in netfilter can access an uninitialized timer,
    fix from Pablo Neira Ayuso.

12) Several netfilter SIP tracker bug fixes from Patrick McHardy.

13) IPSEC ipv6 routes are not initialized correctly all the time,
    resulting in an OOPS in inet_putpeer().  Also from Patrick McHardy.

14) Bridging does rcu_dereference() outside of RCU protected area, from
    Stephen Hemminger.

15) Fix routing cache removal performance regression when looking up
    output routes that have a local destination.  From Zheng Yan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  af_netlink: force credentials passing [CVE-2012-3520]
  ipv4: fix ip header ident selection in __ip_make_skb()
  ipv4: Use newinet->inet_opt in inet_csk_route_child_sock()
  tcp: fix possible socket refcount problem
  net: tcp: move sk_rx_dst_set call after tcp_create_openreq_child()
  net/core/dev.c: fix kernel-doc warning
  netconsole: remove a redundant netconsole_target_put()
  net: ipv6: fix oops in inet_putpeer()
  net/stmmac: fix issue of clk_get for Loongson1B.
  caif: Do not dereference NULL in chnl_recv_cb()
  af_packet: don't emit packet on orig fanout group
  drivers/net/irda: fix error return code
  drivers/net/wan/dscc4.c: fix error return code
  drivers/net/wimax/i2400m/fw.c: fix error return code
  smsc75xx: add missing entry to MAINTAINERS
  net: qmi_wwan: new devices: UML290 and K5006-Z
  net: sh_eth: Add eth support for R8A7779 device
  netdev/phy: skip disabled mdio-mux nodes
  dt: introduce for_each_available_child_of_node, of_get_next_available_child
  net: netprio: fix cgrp create and write priomap race
  ...

Jim Schutt reported a problem that pointed at compaction contending
heavily on locks.  The workload is straight-forward and in his own words;

	The systems in question have 24 SAS drives spread across 3 HBAs,
	running 24 Ceph OSD instances, one per drive.  FWIW these servers
	are dual-socket Intel 5675 Xeons w/48 GB memory.  I've got ~160
	Ceph Linux clients doing dd simultaneously to a Ceph file system
	backed by 12 of these servers.

Early in the test everything looks fine

  procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu-------
   r  b       swpd       free       buff      cache   si   so    bi    bo   in   cs  us sy  id wa st
  31 15          0     287216        576   38606628    0    0     2  1158    2   14   1  3  95  0  0
  27 15          0     225288        576   38583384    0    0    18 2222016 203357 134876  11 56  17 15  0
  28 17          0     219256        576   38544736    0    0    11 2305932 203141 146296  11 49  23 17  0
   6 18          0     215596        576   38552872    0    0     7 2363207 215264 166502  12 45  22 20  0
  22 18          0     226984        576   38596404    0    0     3 2445741 223114 179527  12 43  23 22  0

and then it goes to pot

  procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu-------
   r  b       swpd       free       buff      cache   si   so    bi    bo   in   cs  us sy  id wa st
  163  8          0     464308        576   36791368    0    0    11 22210  866  536   3 13  79  4  0
  207 14          0     917752        576   36181928    0    0   712 1345376 134598 47367   7 90   1  2  0
  123 12          0     685516        576   36296148    0    0   429 1386615 158494 60077   8 84   5  3  0
  123 12          0     598572        576   36333728    0    0  1107 1233281 147542 62351   7 84   5  4  0
  622  7          0     660768        576   36118264    0    0   557 1345548 151394 59353   7 85   4  3  0
  223 11          0     283960        576   36463868    0    0    46 1107160 121846 33006   6 93   1  1  0

Note that system CPU usage is very high blocks being written out has
dropped by 42%. He analysed this with perf and found

  perf record -g -a sleep 10
  perf report --sort symbol --call-graph fractal,5
    34.63%  [k] _raw_spin_lock_irqsave
            |
            |--97.30%-- isolate_freepages
            |          compaction_alloc
            |          unmap_and_move
            |          migrate_pages
            |          compact_zone
            |          compact_zone_order
            |          try_to_compact_pages
            |          __alloc_pages_direct_compact
            |          __alloc_pages_slowpath
            |          __alloc_pages_nodemask
            |          alloc_pages_vma
            |          do_huge_pmd_anonymous_page
            |          handle_mm_fault
            |          do_page_fault
            |          page_fault
            |          |
            |          |--87.39%-- skb_copy_datagram_iovec
            |          |          tcp_recvmsg
            |          |          inet_recvmsg
            |          |          sock_recvmsg
            |          |          sys_recvfrom
            |          |          system_call
            |          |          __recv
            |          |          |
            |          |           --100.00%-- (nil)
            |          |
            |           --12.61%-- memcpy
             --2.70%-- [...]

There was other data but primarily it is all showing that compaction is
contended heavily on the zone->lock and zone->lru_lock.

commit [b2eef8c0: mm: compaction: minimise the time IRQs are disabled
while isolating pages for migration] noted that it was possible for
migration to hold the lru_lock for an excessive amount of time. Very
broadly speaking this patch expands the concept.

This patch introduces compact_checklock_irqsave() to check if a lock
is contended or the process needs to be scheduled. If either condition
is true then async compaction is aborted and the caller is informed.
The page allocator will fail a THP allocation if compaction failed due
to contention. This patch also introduces compact_trylock_irqsave()
which will acquire the lock only if it is not contended and the process
does not need to schedule.
Reported-by: Jim Schutt <jaschut@sandia.gov>
Tested-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7db8889a ("mm: have order > 0 compaction start off where it
left") introduced a caching mechanism to reduce the amount work the free
page scanner does in compaction.  However, it has a problem.  Consider
two process simultaneously scanning free pages

					    			C
	Process A		M     S     			F
			|---------------------------------------|
	Process B		M 	FS

	C is zone->compact_cached_free_pfn
	S is cc->start_pfree_pfn
	M is cc->migrate_pfn
	F is cc->free_pfn

In this diagram, Process A has just reached its migrate scanner, wrapped
around and updated compact_cached_free_pfn accordingly.

Simultaneously, Process B finishes isolating in a block and updates
compact_cached_free_pfn again to the location of its free scanner.

Process A moves to "end_of_zone - one_pageblock" and runs this check

                if (cc->order > 0 && (!cc->wrapped ||
                                      zone->compact_cached_free_pfn >
                                      cc->start_free_pfn))
                        pfn = min(pfn, zone->compact_cached_free_pfn);

compact_cached_free_pfn is above where it started so the free scanner
skips almost the entire space it should have scanned.  When there are
multiple processes compacting it can end in a situation where the entire
zone is not being scanned at all.  Further, it is possible for two
processes to ping-pong update to compact_cached_free_pfn which is just
random.

Overall, the end result wrecks allocation success rates.

There is not an obvious way around this problem without introducing new
locking and state so this patch takes a different approach.

First, it gets rid of the skip logic because it's not clear that it
matters if two free scanners happen to be in the same block but with
racing updates it's too easy for it to skip over blocks it should not.

Second, it updates compact_cached_free_pfn in a more limited set of
circumstances.

If a scanner has wrapped, it updates compact_cached_free_pfn to the end
	of the zone. When a wrapped scanner isolates a page, it updates
	compact_cached_free_pfn to point to the highest pageblock it
	can isolate pages from.

If a scanner has not wrapped when it has finished isolated pages it
	checks if compact_cached_free_pfn is pointing to the end of the
	zone. If so, the value is updated to point to the highest
	pageblock that pages were isolated from. This value will not
	be updated again until a free page scanner wraps and resets
	compact_cached_free_pfn.

This is not optimal and it can still race but the compact_cached_free_pfn
will be pointing to or very near a pageblock with free pages.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG
option off.

This patch is applicable to kernel versions starting from v3.2
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure that there is no doorbell messages left behind due to disabled
interrupts during inbound doorbell processing.

The most common case for this bug is loss of rionet JOIN messages in
systems with three or more rionet participants and MSI or MSI-X enabled.
As result, requests for packet transfers may finish with "destination
unreachable" error message.

This patch is applicable to kernel versions starting from v3.2.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>